Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

rum: add legacy power saving support (STA mode).

Tested with WUSB54GC, STA mode + WRT54GC / RTL8188EU in HOSTAP mode.

Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D5546

Restore maximum number of host keys to 64.

Discussed with: adrian @ and avos @

Reduce the number of supported WLAN keys in the rum driver, else we
risk bit shifting overflows. Found by D5245 / PVS.

MFC after: 1 week

rum(4): add WME support.

Tested:

* WUSB54GC, HOSTAP and STA modes.
* Me: rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3700

rum(4): set short/long retry limits

Now device will use retry limit, which is set via 'ifconfig <interface>
maxretry <number>'.

Tested:

* Tested on WUSB54GC, STA mode.

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3689

rum(4): add support for hardware encryption (WEP, TKIP and CCMP).

This diff includes:

* Transmitter Addresses, Keys and TKIP MIC addition to the Security Key Table.
* Proper SEC Control Registers initialization and maintenance.
* Additional flags and values in TX descriptor, which are required for encryption support.
* Error checking in RX path.

Tested:

* Tested on WUSB54GC, STA (WEP, TKIP, CCMP), HOSTAP (CCMP) and IBSS (CCMP, WPA-None) modes.
* rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, STA mode (CCMP+TKIP)

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3640

rum(4): split rum_prepare_beacon() into 'alloc' and 'set' stages

Note: I manually had to merge this; I merged in the "put beacon_offsets
into vap" commit before this.

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3628

rum(4): simplify rum_set_bssid(), rum_set_macaddr() and rum_update_promisc()

Tested:

* rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, STA mode

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3626

rum(4): sync rum_enable_tsf(_sync) with run(4).

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3611

Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

Discussed with: -arch, rdivacky
Reviewed by: cperciva

Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.

Add necessary include.

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

Remove pointeless mergeinfo that crept in from r190633.

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

Move the new USB stack into its new home.

MFp4 //depot/projects/usb; 157412

Sync from svn.freebsd.org/base/user/thompsa/usb which is a minimal changeset
from oldUSB (no config_td).

This excludes the taskqueue changes (for the moment) as requested.

Restore the if_*var.h and if_*reg.h to their original names, they dont need to
be different.

Restore the if_*var.h and if_*reg.h to their original names, they dont need to
be different.

Add usb playground.

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred