Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Create a USB_PNP_INFO and use it to export the existing PNP
tables. Some drivers needed some slight re-arrangement of declarations
to accommodate this. Change the USB pnp tables slightly to allow
better compatibility with the system by moving linux driver info from
start of each entry to the end. All other PNP tables in the system
have the per-device flags and such at the end of the elements rather
that at the beginning.

Differential Review: https://reviews.freebsd.org/D3458

Make a bunch of USB debug SYSCTLs tunable, so that their value(s) can
be set before the USB device(s) are probed.

Mechanically convert to if_inc_counter().

Fix logical error.

MFC after: 3 days

Correct endianness handling in getting station address from EEPROM.
While I'm here, remove aue_eeprom_getword() as its only usage is to
read station address and make it more readable. This change is
inspired by NetBSD.
With this change, aue(4) should work on big endian architectures.

PR: 188177

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

- Use the consistenly PHY-specific reset routine PHY_RESET() rather than
generic mii_phy_reset().
- Return the result of mii_mediachg() rather than blindly returning 0.
- on smsc(4), driver lock should be held to get current
mii_media_active/mii_media_status value.

Reviewed by: yongari

Fix compiler warnings, mostly signed issues,
when USB modules are compiled with WARNS=9.

MFC after: 1 weeks

- There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by: Karim (fodillemlinkarimi <> gmail dot com)

Only the USB root HUB thread is allowed to attach and detach drivers
to and from USB devices. Remove related DEVMETHOD() lines from USB
drivers.

Reported by: YongHyeon PYUN
MFC after: 3 days

- Move all USB device ID arrays into so-called sections,
sorted according to the mode which they support:
host, device or dual mode
- Add generic tool to extract these data:
tools/bus_autoconf

Discussed with: imp
Suggested by: Robert Millan <rmh@debian.org>
PR: misc/157903
MFC after: 14 days

- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
it might provide useful for debugging). For most mii(4) drivers it
was unclear whether the PHYs driven by them actually support
loopback or not. Moreover, typically loopback mode also needs to
be activated on the MAC, which none of the Ethernet drivers using
mii(4) implements. Given that loopback media has no real use (and
obviously hardly had a chance to actually work) besides for driver
development (which just loopback mode should be sufficient for
though, i.e one doesn't necessary need support for loopback media)
support for it is just dropped as both NetBSD and OpenBSD already
did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
instead of discrete function pointers, and extend this to include
a "reset" entry point. Make sure any PHY-specific reset routine is
always used, and provide one for lxtphy(4) which disables MII
interrupts (as is done for a few other PHYs we have drivers for).
This includes changing NIC drivers which previously just called the
generic mii_phy_reset() to now actually call the PHY-specific reset
routine, which might be crucial in some cases. While at it, the
redundant checks in these NIC drivers for mii->mii_instance not being
zero before calling the reset routines were removed because as soon
as one PHY driver attaches mii->mii_instance is incremented and we
hardly can end up in their media change callbacks etc if no PHY driver
has attached as mii_attach() would have failed in that case and not
attach a miibus(4) instance.
Consequently, NIC drivers now no longer should call mii_phy_reset()
directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
The purpose of that function is to perform the common steps to attach
a PHY driver instance and to hook it up to the miibus(4) instance and to
optionally also handle the probing, addition and initialization of the
supported media. So all a PHY driver without any special requirements
has to do in its bus attach method is to call mii_phy_dev_attach()
along with PHY-specific MIIF_* flags, a pointer to its PHY functions
and the add_media set to one. All PHY drivers were updated to take
advantage of mii_phy_dev_attach() as appropriate. Along with these
changes the capability mask was added to the mii_softc structure so
PHY drivers taking advantage of mii_phy_dev_attach() but still
handling media on their own do not need to fiddle with the MII attach
arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
structure. Several PHY drivers require this information also after
attaching and previously had to wrap their own softc around mii_softc.
NetBSD/OpenBSD also keep track of the model and revision on their
mii_softc structure. All PHY drivers were updated to take advantage
as appropriate.
- Convert the mebers of the MII data structure to unsigned where
appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
when mapping an OUI to the MII ID registers. All PHY drivers and
miidevs where changed as necessary. Actually this now again allows to
largely share miidevs with NetBSD, which fixed this problem already
9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
weren't explicitly converted to support flow control before. It's
unclear whether flow control actually works with these but typically
it should and their net behavior should be more correct with these
changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from: NetBSD (partially)
Reviewed by: yongari (earlier version), silence on arch@ and net@

Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by: bde

Add missing MODULE_VERSION() definitions, this resolves problems around
duplicate module loads.

PR: usb/125736
Submitted by: danger, mm
Reviewed by: hselasky

Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after: 1 week

Use macros to strip off USB_VENDOR_ and USB_PRODUCT_ from some id tables to make
them more compact and readable.

Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.

We used force all of the GPIO pins low first and then
enable the ones we want. This has been changed to better
match the ADMtek's reference design to avoid setting the
power-down configuration line of the PHY at the same time
it is reset.

Submitted by: John Hood via hps

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by: re (kib)
MFC after: 6 weeks

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

s/usb2_/usb_|usbd_/ on all function names for the USB stack.

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

Rename the usb sysctl tree from hw.usb2.* back to hw.usb.*.

Submitted by: Hans Petter Selasky

- rename usb2_mode to usb_mode [1]
- change variable types to use the enum

Submitted by: Hans Petter Selasky [1]

Remove USB shutdown methods from device drivers as its the host controllers
responsibility to detach the bus.

PR: usb/133896
Submitted by: Hans Petter Selasky

Remove pointeless mergeinfo that crept in from r190633.

MFp4 //depot/projects/usb@159909

- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
"usb2_config" has a new field called "usb_mode" which select for which mode
the current xfer entry is active. Options are: a) Device mode only b) Host
mode only (default-by-zero) c) Both modes. This change was scripted using
the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
the code for the function uses less memory than the table itself.

Submitted by: Hans Petter Selasky

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

Rename the ushub device class back to uhub as it was in the old usb stack,
moused(8) looks for "uhub/ums" to decide if needs to load the module.

Reported by: Garrett Cooper

Also use proper capitalisation of FreeBSD in other source files.

Approved by: thompsa

Move the new USB stack into its new home.

Switch over to usbdevs.h generated at compile time.

MFp4 //depot/projects/usb; 157100

1. Move most of the ifnet logic into the usb2_ethernet module, this includes,
- make all usb ethernet interfaces named ue%d
- handle all threading in usb2_ethernet
- provide default ioctl handler
- handle mbuf rx
- provide locked callbacks for init,start,stop,etc

2. Cleanup CDC-Ethernet driver.

Submitted by: Hans Petter Selasky
Obtained from: svn.freebsd.org/base/user/thompsa/usb [1]

Remove check for null softc in attach, it can never happen.

Just put the ifnet pointer first in the softc like it needs to be rather than
adding another deliciously evil pointer.

Name the items in the xfer arrays so they can be identified throughout the
code.

Restore the if_*var.h and if_*reg.h to their original names, they dont need to
be different.

Remove CALLOUT_RETURNUNLOCKED from the callouts, there is no reason for them to
drop the lock for us.

Remove superfluous return statements from the end of void functions.

Format and wrap function declarations.

src/lib/libusb20/libusb20_compat01.c

Fix some issues about re-scanning of the devices.

src/lib/libusb20/libusb20_ugen20.c

Fix issue about libusb20 having to release the
USB transfers before doing a SET_CONFIG, else
the kernel will kill the file handle.

src/sys/dev/usb2/core/usb2_device.
src/sys/dev/usb2/core/usb2_generic.c
src/sys/dev/usb2/core/usb2_generic.h

Add support for U3G devices.
Improve and cleanup FIFO free handling.
Improve device re-enumeration.

src/sys/dev/usb2/core/usb2_msctest.c
src/sys/dev/usb2/core/usb2_msctest.h

Fix some problems in the USB Mass Storage Test.
Add Huawei vendor specific quirks.

src/sys/dev/usb2/core/usb2_request.c

Improve device re-enumeration.

src/sys/dev/usb2/ethernet/if_aue2.c
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
src/sys/dev/usb2/quirk/usb2_quirk.c

Integrate changes from the old USB driver.

src/sys/dev/usb2/include/usb2_standard.h

Add definition of USB3.0 structures from USB.org.

src/sys/dev/usb2/serial/u3g2.c
src/sys/dev/usb2/serial/ugensa2.c
src/sys/modules/usb2/Makefile
src/sys/modules/usb2/serial_3g/Makefile

Import U3G driver.

Submitted by: Hans Petter Selasky (usb4bsd)

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred