MFC r331739
1. Add additional debug prints.
2. Break transmit when IFF_DRV_RUNNING is OFF.
3. set desc_count=0 for default case in switch in ql_rcv_isr()

Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

MFC r314568 (by emaste):

kern_sig.c: ANSIfy and remove archaic register keyword

Sponsored by: The FreeBSD Foundation

MFC r318389 (by emaste):

Remove register keyword from sys/ and ANSIfy prototypes

A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.

ANSIfy related prototypes while here.

Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r329855
1. Added support to offline a port if is error recovery on successful.
2. Sysctls to enable/disable driver_state_dump and error_recovery.
3. Sysctl to control the delay between hw/fw reinitialization and
restarting the fastpath.
4. Stop periodic stats retrieval if interface has IFF_DRV_RUNNING flag off.
5. Print contents of PEG_HALT_STATUS1 and PEG_HALT_STATUS2 on heartbeat
failure.
6. Speed up slowpath shutdown during error recovery.
7. link_state update using atomic_store.
8. Added timestamp information on driver state and minidump captures.
9. Added support for Slowpath event logging
10.Added additional failure injection types to simulate failures.

MFC r324538
Added support driver state capture/retrieval

MFC r324535
Add sanity checks in ql_hw_send() qla_send() to ensure that empty slots
in Tx Ring map to empty slot in Tx_buf array before Transmits. If the
checks fail further Transmission on that Tx Ring is prevented.

MFC r324026
Fix delete all multicast addresses

Submitted by:Anand.Khoje@cavium.com

MFC r323824
1. ql_hw.c:
In ql_hw_send() return EINVAL when TSO framelength exceeds max
supported length by HW.(davidcs)
2. ql_os.c:
In qla_send() call bus_dmamap_unload before freeing mbuf or
recreating dmmamap.(davidcs)
In qla_fp_taskqueue() Add additional checks for IFF_DRV_RUNNING
Fix qla_clear_tx_buf() call bus_dmamap_sync() before freeing
mbuf.

Submitted by: David.Bachu@netapp.com

MFC r323782
Add sysctl "enable_minidump" to turn on/off automatic minidump retrieval

MFC 322771

Upgrade FW to 5.4.66
sysctls to display stats, stats polled every 2 seconds
Modify QLA_LOCK()/QLA_UNLOCK() to not sleep after acquiring mtx_lock
Add support to turn OFF/ON error recovery following heartbeat failure for
debug purposes.
Set default max values to 32 Tx/Rx/SDS rings

MFC 321233
Raise the watchdog timer interval to 2 ticks, there by guaranteeing
that it fires between 1ms and 2ms. `
Treat two consecutive occurrences of Heartbeat failures as a legitimate
Heartbeat failure

MFC 320705
Release mtx hw_lock before calling pause() in qla_stop() and
qla_error_recovery()

MFC 320694
Allow MTU changes without ifconfig down/up

MFC r317996
Fix bug where MTX_DEF lock was held while taskqueue_drain() was invoked.
Check IFF_DRV_RUNNING flag is set prior to calling ql_hw_set_multi()

MFC r317180
Cleanup QLA_LOCK/QLA_UNLOCK macros
remove unused QLA_TX_LOCK/QLA_TX_UNLOCK macros
format qla_error_recovery()

MFC r316309
Add support for optional Soft LRO

MFC r314062
add bus_dmamap_unload in ql_free_dmabuf()

MFC r312728
Added support for if_transmit and if_qflush
Removed if_start
updated version to 3.10.33

MFC r306790
Add support for adding up to 64 Multicast addresses with a single
mailbox command

MFC 304249
Add support for set/get cam search mode

MFC r394247
Upgrade fw, bootloader and minidump template to version 5.4.58
Add minidump retrieval code

MFC r394248
Add ql_minidump.h

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

ql_hw.c: fixed error code INJCT_HEARTBEAT_FAILURE
ql_os.c: removed unnecessary debug printf
ql_ver.h: updated version number
MFC after:5 days

Updated Copyright information
Added support for the following:
- iSCSI TLV (requires 64 Tx and 32 Rx rings
- 9K receive buffers for jumbo frames (feature may be enabled/disabled)
- builtin firmware, bootloader and minidump template
- quick stats
- async event handling for SFP insertion/removal and DCBX changes
- Configuring DCBX and interrupt coalescing parameters

CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.

Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks

Start process of removing the use of the deprecated "M_FLOWID" flag
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.

This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.

"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.

Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.

MFC after: 1 month
Sponsored by: Mellanox Technologies

Fix multiple incorrect SYSCTL arguments in the kernel:

- Wrong integer type was specified.

- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.

- Logical OR where binary OR was expected.

- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.

- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.

- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.

- Updated "EXAMPLES" section in SYSCTL manual page.

MFC after: 3 days
Sponsored by: Mellanox Technologies

Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by: Nginx, Inc.

Unload maps for DMA buffers allocated via bus_dmamem_alloc() before
freeing the buffers.

Reviewed by: davidcs

Since 32-bit if_baudrate isn't enough to describe a baud rate of a 10 Gbit
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.

o Remove the if_baudrate_pf crutch.

o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.

This also removes quite a lot of COMPAT_FREEBSD32 code.

o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.

o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.

__FreeBSD_version bumped.

Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.

ql_minidump() should be performed only by port 0.

Submitted by: David C Somayajulu

Port 0 needs to wait for ACK only if it issued the RESET.

Add Qlogic 10Gigabit Ethernet & CNA Adapter Driver Version 3.10.10 for
QLogic 8300 Series Adapters

Submitted by: David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
Approved by: George Neville-Neil (gnn@freebsd.org)