MFC r359688: stand: -fno-common fixes for !x86 loaders

- beriloader: archsw is declared extern and defined elsewhere
- ofwloader: ofw_elf{,64} are defined in elf_freebsd.c and
ppc64_elf_freebsd.c respectively
- ubldr: syscall_ptr is defined in start.S for whichever ubldr platform is
building

-fno-common will become the default in GCC10/LLVM11.

MFC r341101, r341231, r341276, r341329, r341433, r341780, r342054-r342055,
r342721, r342742, r342840, r343008, r343225

r341101:
powerpcspe: Don't crash the loader on ubldr with SPE instructions.

-msoft-float seems to be insufficient for disabling the SPE on powerpcspe.
Force it off with -mno-spe as well. This prevents a crash in ubldr on
powerpcspe.

r341231:
loader: command_bcache() should print unsigned values

All bcache counters are unsigned.

r341276:
When handling CMD_CRIT error set command_errmsg to NULL after we dump it out,
so that it does not result in error message printed twice.

OK load doodoo
can't find 'doodoo'
can't find 'doodoo'
OK

r341329:
loader.efi: fix EFI getchar() for multiple consoles

This fix is ported from illumos (issue #9970), the analysis and initial
implementation was done by John Levon.

See also: https://www.illumos.org/issues/9970

Currently, efi_cons_getchar() will wait for a key. While this seems to make
sense, the implementation of getchar() in common/console.c will loop across
getchar() for all consoles without doing ischar() first.

This means that if we've configured multiple consoles, we can't input into
the serial, as getchar() will be sat waiting for input only from efi_console.c

This patch does implement a bit more generic key buffer to support
translation of input keys, and we use generic efi_readkey() to reduce
duplication from calls from getchar() and poll().

r341433:
Move inclusion of src.opts.mk later.

src.opts.mk includes bsd.own.mk. This in turn defines CTFCONVERT_CMD
depending on the MK_CTF value. We then set MK_CTF to no, which has no
real effect. The solution is to set all the MK_foo values before
including src.opts.mk.

This should stop the cdboot binary from exploding in size for releases
built WITH_CTF=yes in src.conf.

r341780:
powerpc/ubldr: Teach powerpc's ubldr to boot 64-bit kernels

This is just a copy of powerpc/ofw's ppc64_elf_freebsd.c modified to fit
ubldr's boot format.

r342054:
Print an error message in efi_main.c if we can't allocate memory for the heap

With the default Qemu parameters, only 128MB RAM gets given to a VM. This causes
the loader to be unable to allocate the 64MB it needs for the heap. This change
makes the cause of the error more obvious.

r342055:
Cast error message in efi_main.c to CHAR16* to avoid build error

r342721:
loader.efi: update memmap command to recognize new attributes

Also move memory type to string translation to libefi for later use.

r342742:
loader.efi: efi variable rework and lsefi command added

This update does add diag and debug capabilities to interpret the efi
variables, configuration and protocols (lsefi).

The side effect is that we add/update bunch of related headers.

r342840:
Create MK_LOADER_VERBOSE and connect it to ELF_VERBOSE in the loader
code.

r343008:
Add Dell Chromebook to the list of devices with E820 extmem quirk enabled

Just like for Acer C270 chromebook the E820 extmem workaround is required for
FreeBSD to boot on Dell chromebook.

r343225:
Unbreak mip64 build after r328437

Add exit and getchar functions to beri/boot2 code. They are required by
panic_action functin introduced in r328437

PR: 18498, 204916

MFC r335117: stand bootprog_info consolidation

bootprog_info is generated in vers.c. Move it's definition to
bootstrap.h and remove all the redundant copies.

MFC r335733:

Don't use CCACHE for linking.

MFC r330806-r330815, r330837, r330864, r330883

pc98 changes associated with the named commits are also included in this
commit, despite not having been made with the original commits due to its
removal in head.

r330806:
Minor cosmetic changes.

Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.

r330807:
We can't use d_opendata for blkio storage.

open_disk uses d_opendata for it's own purpse. We can't store blkio
there. Fortunately, blkio is stored elsewhere and we never actually
retrieve blkio from d_opendata. Eliminate it as a source of confusion.
Eliminate all stores of d_opendata in efi since this layer doesn't own
that field.

r330808:
Make struct libi386_devdesc match the struct devdesc better

Move data to top and call it d_opendata.

r330809:
Use the actual struct devdesc at the start of all *_devdesc structs

The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.

For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.

All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.

r330810:
Remove d_type from devdesc. It's not needed as we can fetch it from
d_dev->dv_type when we need it.

r330811:
GC unused routines.

Sponsored by: Netflix

r330812:
Use the one-line-per-file pattern here, and sort the file names.

Sponsored by: Netflix

r330813:
Move the env convenience routines out of boot1.c.

These routines are more generally useful. Even though boot1 is on its
way out, it's better to make these common during the transition than
copy them.

r330814:
Star BootCurrent entry when booting.

Sponsored by: Netflix

r330815:
Print the load and device path as well as BootCurrent and BootOrder

Sponsored by: Netflix

r330837:
biosdisk.c should not set d_opendata.

Same as 330807, d_opendata is owned by open_disk and we should not
set it.

M stand/i386/libi386/biosdisk.c

r330864:
Prefer uintXX_t to u_intXX_t

A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson

r330883:
Fix typo that misteriously passes compilation.

MFC r329190, r329315, r330131: metadata load file unification

r329190: Unify metadata load files for arm, mips, powerpc, sparc64

Summary:
All metadata.c files are very similar, with only trivial changes. Unify them
into a single common file, with minor special-casing where needed.

r329315: stand: Fix ubldr after r329190

metadata load files were consolidated in r329190, and these relocation fixup
bits were inadvertently dropped in the process. Re-add them to fix boot with
ubldr.

r330131: Fix module loading on arm after the metadata.c unification in
r329190. Arm modules need an additional address fixup not needed by other
platforms.

MFC r330788: beri loader: Replace getc/putc with beri_ prefixed versions

This matches a convention that we use, at least in ubldr, to prefix
getc/putc with a loader-specific prefix to avoid collisions. This was
encountered while trying to build the beri loader with MK_LOADER_LUA=yes.

MFC r329345: Eliminate bsd.stand.mk and -fPIC 32-bit intel builds

OK. We don't really need a bsd.stand.mk, and it was causing a -fPIC
for the toolchain to be added (bogusly) when building on amd64. Pull
all relevant defs back into defs.mk and delete bsd.stand.mk.

This saves about 15-20k on i386 loader and zfsloader which when
combined with Lua give us a lot more stack space in those constrained
environments.

MFC r330005-r330007, r330021, r330029, r330622, r331207: Solo loader.conf(5)

r330005:
Go back to one loader.conf

We really only need one loader.conf. The other loader.conf was created
because the current one took forever to parse in FORTH. That will be
fixed in the next commit.

r330006:
Take a meat cleaver to defaults/loader.conf

Remove almost all of the _load=XXX options (kept only those relevant
to splash screens, since there were other settings).
Remove the excessively cutesy comment blocks.
Remove excessive comments and replace with similar content
Remove gratuitous blank lines (while leaving some)

We have too many modules to list them all here. There's no purpose in
doing so and it's a giant hassle to maintain. In addition the extra
~500 lines slow this down on small platforms. It slowed it down
so much small platforms forked, which caused other issues...
This is a compromise between those two extremes.

r330007:
loader.conf is loader agnostic, so remove 4th references.

r330021:
These two directories build man pages, so it's incorrect to tag them
NO_OBJ. Also, make sure the loader.conf.5 man gets built and installed.

r330029:
Fix a typo: "now" -> "no".

r330622:
loader.conf(5): Document some other settings

These tend to have less coverage in other places and they don't have
defaults as of yet, so mention them here:
- fdt_overlays
- kernels_autodetect (lualoader only)

r331207:
loader.conf: remove obsolete non-x86 beastie menu statement

As of r330005 the same loader.conf defaults are used on all platforms.

MFC r330004: Add NO_OBJ to those directories that don't make anything.

For directories that don't many anything, add NO_OBJ=t just before we
include bsd.init.mk. This prevents them from creating an OBJ
directory. In addition, prevent defs.mk from creating the machine
related links in these cases. They aren't needed and break, at least
on stable, the read-only src tree build.

PR: 226074

MFC Loader Fixes Final: r327612,r327703,r327704,r327878,r327879,r327881,
r328007,r328029,r328030,r328031,r328061,r328156,r328169,r328288,r328289,
r328290,r328291,r328292,r328411,r328536,r328603,r328614,r328642,r328769,
r328779,r328780,r328781,r328782,r328783,r328806,r328808,r328826,r328835,
r328911,r328986,r328987,r328990,r328999,r329000,r329019,r329050,r329054,
r329060

r327612: Invent new #defines for the biospci_{read,write}_config function

r327703: Define __dmadat after #include'ing ufsread.c.

r327704: Fix printf missing format variables warnings.

r327878: Add GUID for UEFI boot manager variables.

r327879: Report the boot order and where we are in that boot order.

r327881: Allow this file to be included

r328007: Fix booting on some arm64 systems after r327879 by fixing the call
to utf8_to_ucs2

r328029: When returning an error and freeing allocated memory from
ucs2_to_utf8, NULL the return pointer.

r328030: Check the return value from utf8_to_ucs2 instead of whether or not
uv is NULL.

r328031: Need to free uv after we're done using it.

r328061: utf8_to_ucs2() should check for malloc failure

r328156: stand: Move sections around to fix stand/ build with ld.lld on
armv7

r328169: Remove extra copy of bootinfo.c. It's a bit rotted copy of the one
in efi/loader.

r328288: Fix some resource leaks.

r328289: Don't leak memory when displaying help.

r328290: On malloc failure, be sure to close the include file that triggered
it.

r328291: getenv does not return tainted data in the boot loader. Attempt to
clue Coverity into that fact.

r328292: There's no tainted data here, tag it as such to avoid false
positives.

r328411: loader.efi: add missing EFI GUIDs

r328536: loader: support for mixed-endianness ELF/loader and POWER8

r328603: Add missing non-POWERPC case to give the scr value something
non-zero.

r328614: Move libstand.3 to libsa.3. Update libsa.3 to include functions

r328642: Break out the interpreters (simple and forth) w/o ifdefs.

r328769: Centralize several variables.

r328779: Retire pnp.4th and the code needed only for 4th words used here.

r328780: These 4th words were an attempt to allow integration into the boot
loader scripts. However, that path won't be taken after all it
seems.

r328781: Remove pcibios forth support.

r328782: Now that we no longer conditionally compile some files outside of
ficl

r328783: Invent new LDR_INTERP for the loader interpreter to use.

r328806: We need more heap space to properly load newer powerpc kernels.

r328808: Implement strcoll as strcmp.

r328826: Make cross-endian loader changes apply only to powerpc

r328835: Fix regression introduced in r328806, preventing boot on many
platforms.

r328911: Ignore relocation tables for non-memory-resident sections.

r328986: Fix relative location of USB sources after recent move.

r328987: A more definitions to kernel emulation shim in order to build
stand/usb.

r328990: Move the stand/usb test loader into its own directory.

r328999: Fix indentation to FreeBSD standard for interp files

r329000: Move simple interpreter 'perform' into interp.c and call it

r329019: Move to tabs for indentation and to 8-space notches, per style(9).

r329050: Fix build of userboot.so

r329054: Set script.lang in the environment to either 'forth' or 'simple' to
reflect what scripting language was compiled into the loader.

r329060: loader: fix endianness conversion

PR: 225323

MFC r327705,r328447: Fix BERI bootloader build

r327705: Use <stand.h> instead of <inttypes.h> and <stdio.h> in boot code.
r328447: BERI isn't BTX, so we don't have to provide exit().

MFC Loader Fixes 2017q4p7: r324844,r326089,r326926,r326440,r326484,r326494,
r326588,r326708,r326784,r326914,r327390,r328446,r326090,r326143,r326144,
r326182,r326384,r326421,r326440,r326441,r326442,r326443,r326444,r326445,
r326446,r326447,r326448,r326484,r326485,r326486,r326487,r326488,r326490,
r326491,r326492,r326493,r326494,r326495,r326504,r326507,r326509,r326584,
r326585,r326586,r326587,r326588,r326589,r326590,r326591,r326592,r326593,
r326594,r326600,r326616,r326671,r326707,r326708,r326709,r326710,r326711,
r326712,r326714,r326720,r326768,r326772,r326784,r326792,r326812,r326854,
r326855,r326856,r326858,r326886,r326887,r326914,r326926,r326927,r326960,
r326961,r326962,r326963,r327351,r327453,r327390,r327523,r327524,r326489,
r327880,r328437,r328438,r328439,r328441,r328446,r328448,r328449,r328612,
r328613,r328615

While here, undo our libfdt hack of not including <stdlib.h> if we're
compiling _STANDALONE.

r324844: When building standalone, don't define errno. Let the definition from
stand.h override. This is similar to what we do in the kernel.

r326089: loader.efi: efipart does not recognize partitionless disks

r326090: net_parse_rootpath() has no parameters

r326143: Fix theoretical integer overflow issues. If the product here is

r326144: Mark the func pointer as __dead2. It looks up loader_main, which

r326182: Modify all FreeBSD bootloaders on PowerPC AIM (Book-S) systems

r326384: Use const pointers to avoid casting away constness.

r326421: loader.efi: efipart should exclude iPXE stub block protocol

r326440: Remove stale dependency on ufsread.c

r326441: Minor flags cleanup

r326442: Cleanup CFALGS usage here

r326443: We don't need both _STAND and _STANDALONE, use the latter.

r326444: Move geli to common DO32 stuff

r326445: Fix random() and srandom() prototypes to match the standard.

r326446: Undefine _STANDALONE since this is test code.

r326447: Tweaks to the beri boot loader so that it builds w/o warnings.

r326448: Fix all warnings related to geli and ZFS support on x86.

r326484: Const poison the propname.

r326485: Delcare md_load in libofw.h. Make all prototypes match for ofw

r326486: Include machine/md_var to pick up __syncicache prototype.

r326487: Cast mdp (a vm_offset_t) to void * to match prototype.

r326488: e_entry can be smaller than a pointer. Cast it to an intptr_t

r326490: Declare our strange brand of main().

r326491: Disconnet ps3 from the build. There's too many warnings to fix.

r326492: Cast void * pointer to char * so the arg matches the %s format.

r326493: Provide a md_load64 prototype.

r326494: Mark two things as unused (since they are only sometimes used)

r326495: Now it's safe to bump WARNS to 1.

r326504: Switch to proper MK_LOADER_GELI tests.

r326507: increase maximum size of zfsboot

r326509: loader.efi: add note about iPXE into the efipart.c

r326584: When building standalone, include stand.h rather than the kernel

r326585: Include ficl.h before anything else

r326586: No need to include the userland md5.h, the kernel one is just fine.

r326587: Use the kernel relative paths, rather than the userland relative
paths

r326588: Need to include skein in the include path

r326589: Make sure we include the right path for skein.h

r326590: Prefer stdint.h to inttypes.h

r326591: This isn't NetBSD specific code. Include these for any kernel /

r326592: Don't inherit CFLAGS. This a specialized test program.

r326593: Stop building with the standard system headers.

r326594: Now that we offer a semi-sane standards-ish set of #include files,
stop hacking includes with sed.

r326600: Since this is contrib code, create an upstreamable version of my

r326616: dhcp_try_rfc1048() is not used any more

r326671: Avoid setting -Wno-tentative-definition-incomplete-type with gcc.

r326707: Add partial support signal.h functioanlity. Pull in
machine/signal.h

r326708: Remove _KERNEL hack now that errno.h does the right thing when
built standalone.

r326709: Provide implementations for iscntrl, ispunct and isgraph.

r326710: Put the files we're copying over into a few variables and clean
hings up.

r326711: Const poison a couple of interfaces.

r326712: Create interp class.

r326714: boot1.c needs EFI_ZFS_BOOT too, so add it globally.

r326720: This path belongs in ficl/Makefile, not the common defines for
users

r326768: Fix a comment to be more accurate

r326772: Fix regression with lua import

r326784: Revert part of 362772. It was causing problems for includes

r326792: Attempt to unbreak buildworld

r326812: Revert r326792, r326784, r326772, r326712

r326854: libefi: make efichar.h more usable in stand code

r326855: Cargo cut a fix for the regressions r326585 caused.

r326856: Fix comments after bump in size.

r326858: Revert r326855: Cargo cut a fix for the regressions r326585 caused.

r326886: Panic in sbrk if setheap hasn't been called yet. This is preferable
o a mysterious crash

r326887: Remove the 'mini libstand in libstand' that util.[ch] provided.

r326914: Move loader-only defines to loader.mk from defs.mk

r326926: Move loader help file definitions to being 100% inside of
loader.mk.

r326927: libficl is only ever used in a loader (never a boot) program. Move
it.

r326960: Simplify things a little. The RETURN macro isn't required.

r326961: Interact is always called with NULL. Simplify code a little

r326962: Hoist btx include stuff to i386/Makefile.inc

r326963: No need to use relative paths like this here.

r327351: Fix ubldr. uboot/lib uses defines for the loader.

r327453: Add a validbcd() routine that uses the bcd2bin_data[] array

r327390: Garbage-collect loader.ps3. It is currently disconnected from the
build and kboot replaces.

r327523: Don't clobber system LDFLAGS for beri boot loaders.

r327524: Use 'extern uint8_t' instead of 'extern void' for external symbols.

r326489: Allow this file to be used in libsa without warning...

r327880: Move getsecs() prototype to stand.h from net.h so it can be used

r328437: Split panic routine

r328438: Implement abort() as a call to panic.

r328439: Provide abs form stdlib.h.

r328441: abort() should be marked __dead2 since it won't return.

r328446: Now that exit is __dead2, we need to tag ub_exit() as __dead2.

r328448: Make exit() never return until host_exit can be written.

r328449: Tag unreachable places as such. I left the while (1); in place

r328612: Move strtold wrapper from strtol.c to its own strtold.c.

r328613: Kill copies of strtol and strtoul.

r328615: Update stand.h for changes for strto*l

PR: 223969

MFC r326038,r326069,r326072: More stand simplification and fixes

r326038: Move some more common stuff up to Makefile.inc.

r326069: Fix gptzfsboot for cases with GELI.

r326072: Unbreak riscv build in universe.

MFC r325834,r325997,326502: Move sys/boot to stand/

This is effectively a direct commit to stable/11, due to differences between
stable/11 and head. Changes to DTS in sys/boot/fdt/dts were often
accompanied by kernel changes. Many of these were also risc-v updates that
likely had many more dependencies to MFC.

Because of this, sys/boot/fdt/dts remains as-is while everything else in
sys/boot relocates to stand/.

r325834: Move sys/boot to stand. Fix all references to new location

r325997: Remove empty directories.

r326502: Document the sys/boot -> stand move in hier.7 and the top-level README.

MFC Loader Fixes 2017q4p6: r324649,r324650,r324651,r324652,r324653,r324654,
r324700,r324702,r324709,r324717,r324719,r324841,r324842,r324843,r324845,
r324850,r324876,r324877,r324878,r324879,r324880,r324881,r324883,r324980,
r324981,r324982,r324995,r325014,r325093,r325094,r325114,r325170,r325171,
r325172,r325173,r325174,r325175,r325176,r325248,r325286,r325310,r325332,
r325338,r325339,r325376,r325377,r325379,r325380,r325382,r325478,r325479,
r325480,r325482,r325483,r325484,r325485,r325556,r325641,r325681,r325685,
r325686,r325687,r325688,r325689,r325690,r325691,r325692,r325693,r325694,
r325743,r325744,r325748,r325775,r325779,r325780

r324649: Move common/Makefile.inc to sys/boot/loader.mk.

r324650: tweak style

r324651: create defs.mk for common definitions

r324652: Move all the ficl common code into ficl.mk

r324653: LOADER_foo_SUPPORTED

r324654: Explicitly inlcude SYSDIR in the include path

r324700: loader: initialize dv_cleanup in md.c to eliminate clang warning

r324702: We need to include disk.o in libuboot.a when we're building with
support for disk access.

r324709: Revert "Unify boot1 with loader" change r324646

r324717: libsa/ip.c: misplaced comment, ip_v is half char, not ip_p

r324719: libsa/ip: stop read loop on bad fragments

r324841: Use BOOTDIR more consistently in defs.mk rather than repeat
sys/boot.

r324842: Introduce BOOTOBJ: The top level object directory for the boot tree

r324843: Stopgap fix to the mistmatch between LOADER_GELI_SUPPORT and
LOADER_NO_GELI_SUPPORT.

r324845: Use BOOTOBJ and BOOTDIR to find geli includes and libraries.

r324850: Define LIBSA32 to LIBSA on i386 to fix build.

r324876: Move fdt and uboot defines into common uboot.mk.

r324877: End source directories with SRC rather than a hodgepodge of names

r324878: Make at91 boot loader compile again.

r324879: Prefer SRCTOP paths for bits we're grabbing from libc.

r324880: Use BOOTSRC here.

r324881: Use SYSDIR instead of ${.CURDIR}/../..<etc>/sys.

r324883: Use preferred defined paths, rather than relative paths in fdt.

r324980: Use BOOTDIR consistently.

r324981: Move BINDIR definition to defs.mk, and override where it isn't
/boot

r324982: Remove sys/boot/arm/at91 and ixp425

r324995: loader.efi: Make framebuffer commands available for arm64

r325014: Add a 'place holder' arm struct efi_fb until a real one comes

r325093: Define new EFI variables

r325094: Cleanup non-arch Makefiles

r325114: Use defs.mk defins in most MD code

r325170: Use defs.mk values for userboot

r325171: Use defs.mk name and prefer bsd.init.mk

r325172: Remove the -nostdlib stuff I added. Instead, fix LDFLAGS to be
honored correctly with the new Makefile.inc include order.

r325173: We don't need to build a special ficl for userboot.

r325174: Minor cleanup

r325175: For amd64, compile both zfs and zfs32 libraries.

r325176: Actually add zfs32/Makefile

r325248: loader ptblread() is broken with >512B sectors

r325286: efipart_strategy is using wrong offset with >512B sectors

r325310: zfs.c:vdev_read() needs to be careful about large sectors

r325332: loader: re-enable gzip support for x86

r325338: loader: fix BOOTSRC -> BOOTOBJ in a library path

r325339: This used to have bzip2 support too.

r325376: WIP: centralize machine links

r325377: mostly libsa

r325379: Revert "mostly libsa"

r325380: Revert "WIP: centralize machine links"

r325382: Cleanup stray libstand names to be libsa names.

r325478: Powerpc is a 32-bit boot loader.

r325479: Define LIBFICL32 to be libficl.a on i386 and libficl32.a on amd64.

r325480: Use DO32 for all the places that we need to flag we're building a
32-bit version of a library.

r325482: Move machine and other link creation to defs.mk

r325483: MACHINE can never be powerpc64, so cleanup code that thinks it can.

r325484: Prefer bsd.init.mk to src.opts.mk

r325485: Centralize all 32-bit builds on 64-bit platform stuff.

r325556: loader: set options before including bsd.init.mk

r325641: loader.efi: efi_devpath_is_prefix should return bool

r325681: boot1: avoid using NULL device path

r325685: libsa32 isn't needed for i386. It's already a 32-bit platform.

r325686: Simplify this if to a direct assignment.

r325687: Remove all the empty help files from the powerpc build.

r325688: FDT support doesn't make sense for ps3, remove it.

r325689: Remove LOADER_FDT_SUPPORT as a Makefile variable.

r325690: Remove LOADER_ZFS_SUPPORT as a Makefile variable

r325691: Remove useless PNP define here.

r325692: Replace LOADER_FIREWIRE_SUPPORT variable

r325693: Move LOADER_{NO,}_GELI_SUPPORT to MK_LOADER_GELI

r325694: Install the 4th files in sys/boot/forth instead of each loader

r325743: Make sure the proper loader.rc gets installed.

r325744: boot1: also check for NULL device

r325748: Use proper include file.

r325775: Add loader.conf to the list of files that are MD.

r325779: Add /boot/dts to the list of default modules.

r325780: Don't add /boot/dt*s* but /boot/dt*b*. Stupid think-o.

MFC Loader Fixes 2017q4p5: r324557,r324558,r324559,r324646,r324647

r324557: Rename exit to efi_exit to avoid clashing with libsa exit
definition

r324558: Define prototype for exit and ensure references

r324559: Move panic back into libsa. It's documented in libstand(3) to
belong there.

r324646: Unify boot1 with loader.

r324647: Move orphaned man pages into new man directory from common.

MFC Loader Fixes 2017q4p3: r324460,r324471

r324460: Rather than laying whack-a-mole with including the path to stand.h,
always include it.

r324471: Fix typos: `stand alon{e,g}` should be spelled like `standalone`

MFC Loader Fixes 2017q4p1: r324321,r324359,r324360,r324388,r324449,r324450,
r324451,r324452

r324321: This README file was quite relevant for FreeBSD 3 or 4. No more.

r324359: Add efi_devpath_is_prefix

r324360: Encapsulate ZFS preferences into efi_zfs_is_preferred

r324388: Unbreak building efiboot with MK_ZFS == no

r324449: Prefer ${LIBSTAND} to -lstand

r324450: Define SASRC and use it

r324451: Add missing -I${SASRC} in a couple of places so that stand.h
doesn't accidentally come in via host pollution.

r324452: Define LIBSA* and use them instead of overloaded LIBSTAND

Back out MFC r324558: Define prototype for exit and ensure references

This went terribly wrong

MFC Loader Fixes 2017q3: r320547,r320553,r321621,r321844,r321969,r321991,
r322037,r322038,r322039,r322040,r322056,r322074,r322542,r322592,r322593,
r322896,r322923,r323671,r322930,r322931,r322932,r322933,r322934,r322935,
r322936,r322937,r322938,r322939,r322941,r323062,r323063,r323064,r323065,
r323100,r323131,r323174,r323258,r323261,r323272,r323367,r323379,r323389,
r323407,r323428,r323436,r323494,r323496,r323497,r323541,r323554,r323589,
r323707,r323867,r323885,r323886,r323895,r323896,r323897,r323905,r323906,
r323907,r323908,r323909,r323952,r323991,r324099,r324558,r326445,r326609,
r326610

This batch includes a special kludge to fix powerpc loader build; <stdlib.h>
was included after <stand.h> there, causing problems with DEBUG_MALLOC bits.
Include <stdlib.h> a little bit earlier to fix the build with the intention
of removing this when eventually libsa silently replaces stdlib.h with
stand.h.

r320547: Link EFI/uboot loaders with -znotext

r320553: Integer underflow in efipart_realstrategy when I/O starts after end
of disk

r321621: Always set the receive mask in loader.efi.

r321844: Clean up style in print_state(..) and pager_printf(..)

r321969: Fix the return types for printf and putchar to match their libc

r321991: Revert r321969

r322037: Add stpcpy and stpncpy to libstand

r322038: Add definitions and utilities for EFI drivers

r322039: Move EFI ZFS functions to libefi

r322040: Add EFI utility functions to libefi

r322056: Move EFI fmtdev functionality to libefi

r322074: libefi/time.c cstyle cleanup

r322542: loader.efi: repace XXX with real comments in trap.c

r322592: Remove unused defines.

r322593: Define proposed GUID for FreeBSD boot loader variables.

r322896: Make spinconsole platform independent and hook it up into EFI
loader

r322923: Hide length of geli passphrase during boot.

r323671: Fix language used in the r322923.

r322930: Move efi_main into efi/loader

r322931: Cleanup efi_main return type

r322932: Use the loader.efi conventions for the various EFI tables.

r322933: No need for MK_ZFS around these: they are by their nature only
active when MK_ZFS is true.

r322934: _STAND is sometimes defined on the command line. Make the define
here match.

r322935: Fix warnings due to type mismatch.

r322936: Remove useless 'static' for an enum definition.

r322937: Forward declare struct dsk to avoid warnings when building libi386.

r322938: Link in libefi for boot1

r322939: Use efi_devpath_str for debug path info.

r322941: Eliminate redunant device path matching.

r323062: Make efichar.c routines available to libefi.

r323063: boot1.efi: print more info about where boot1.efi is loaded from

r323064: Exit rather than panic for most errors.

r323065: Save where we're booted from

r323100: libstand: nfs_readlink() should return proper return code

r323131: Revert r322941: Eliminate redundant device matching functions

r323174: Fix loader bug causing too many pages allocation when bootloader
is U-Boot

r323258: ucs2len

r323261: Fix armv6 build

r323272: Be consistent and do return (1);

r323367: Mark init_chroot and init_script variables as deprecated.

r323379: It's been pointed out that init_script at least is useful w/o

r323389: loader.efi: chain loader should provide proper device handle

r323407: boot1 generate-fat: generate all templates at once

r323428: r323389 breaks the kernel build when WITHOUT_ZFS is defined in
src.conf

r323436: boot1: remove BOOT1_MAXSIZE default value

r323494: loader should support large_dnode

r323496: libstand: tftp_open() can leak pkt on error

r323497: libefi: efipart_open should check the status from disk_open

r323541: libefi: efipart_realstrategy rsize pointer may be NULL

r323554: Increase EFI boot file size frok 128k to 384k

r323589: loader: biosmem.c cstyle cleanup

r323707: loader: biosmem allocate heap just below 4GB

r323867: libefi: devicename.c cleanups

r323885: libefi: efi_devpath_match() should return bool

r323886: libefi: efipart.c should use calloc()

r323895: libefi: efi_devpath_match local len should be unsigned

r323896: r323885 did miss efilib.h update

r323897: efilib.h: typo in structure member description

r323905: libefi: pdinfo_t pd_unit and pd_open should be unsigned

r323906: libefi: efipart_strategy() should return ENXIO when there is no
media

r323907: libefi: efipart.c cstyle fix for efipart_print_common()

r323908: libefi: efipart_hdinfo_add_filepath should check strtol result

r323909: libefi: define EISA PNP constants

r323952: After the r317886 support for TFTP and NFS can be enable
simultaneously.

r323991: libefi: efipart_floppy() will should not pass acpi pointer if the
HID test fails

r324099: Compile loader as Little-Endian on PPC64/POWER8

r324558: Define prototype for exit and ensure references

r326445: Fix random() and srandom() prototypes to match the standard.

r326609: Make putenv and getenv match the userland definition

r326610: Fix random() prototype to match the system.

PR: 219000 221001 222215
Relnotes: yes ("The length of the geli passphrase is hidden during boot")

MFC Loader Fixes 2017q2: r316437,r316577,r316578,r316585,r316590,r316612,
r316625,r316628,r316654,r316682,r316704,r316771,r317092,r317097,r317099,
r317652,r317785,r317886,r317887,r318142,r318320,r318356,r318678,r318754,
r318982,r318986,r318987,r318988,r318989,r318990,r318991,r318992,r318993,
r318994,r318999,r319083,r319084,r319085,r320011,r320234,r320288,r320304,
r320467,r320482

r316437: Small cleanup to make i386/loader match efi/loader boot environment
code

r316577: loader: part.c cstyle cleanup

r316578: loader: want mechanism to avoid RA with bcache

r316585: loader: zfs reader should check all labels

r316590: libstand/dosfs: cache FAT32 in 128 Kb blocks to save loader memory

r316612: In r298230 the value of HEAP_MIN was changed from 3MB to 64MB.
Correct a comment.

r316625: Do not use -msoft-float with intention of disabling FP on aarch64

r316628: Silence GCC warning by initializing the local variable.

r316654: loader: r316585 did miss userboot update

r316682: loader: r316585 did miss sparc/ofw

r316704: loader.efi: only fetch zfs pool guid for the actual boot device

r316771: loader: Avoid possible overflow via environment variable

r317092: loader: zfs reader vdev_probe should check for minimum device size

r317097: loader: F_READ/F_WRITE should be checked against masked flag

r317099: loader: uboot disk ioctl should call disk_ioctl

r317652: loader.efi: ResetSystem does not use data with EFI_SUCCESS

r317785: zfsboot: drvsize() may be unusable on some systems

r317886: distinguish NFS versus TFTP boot by rootpath

r317887: loader: network read rework

r318142: libstand: NULL pointer dereference in rarp

r318320: loader: add ip layer code into libstand

r318356: libstand: increase nfs max read size to 16k

r318678: Replacing iterating over rootpath by strsep(3).

r318754: Pass -N directly to ld via -Wl rather than passing it to the
compiler driver.

r318982: Pass a "FREEBSD" user-class in PXE dhcp request

r318986: add a comment on vendor index 19 and 20 to avoid confusion

r318987: Support URI scheme for root-path in netbooting

r318988: Always build tftpfs support along with nfs for pxeboot

r318989: Always issue the pxe request

r318990: Partially revert r314948

r318991: Document recent changes on pxeboot

r318992: Capitalize DHCP

r318993: Use the usual FreeBSD spelling for the DHCP user class

r318994: Catch with the change in the user class

r318999: Update the comments concerning net_parse_rootpath to reflect what
it is now

r319083: Followup on the user-class changes

r319084: Small cleanup in dev_net.c

r319085: use the same option list for dhcp discovery and request

r320011: Add chain loader support for loader

r320234: Make structure padding explicit in EFI_MEMORY_DESCRIPTOR

r320288: Allow Clang's integrated assembler to assemble boot0

r320304: loader.efi: Disable smbios for arm

r320467: loader: chain load relocate data declaration is bad

r320482: As with arm64 mark the EFI PE header as allocated on arm.

PR: 218473

MFC Loader Fixes 2017q1: r311458,r312237,r312314,r312374,r312947,r313042,
r313047,r313166,r313328,r313332,r313333,r313337,r313348,r313349,r313389,
r313442,r313451,r313575,r313645,r313710,r314114,r314213,r314275,r314945,
r314948,r315008,r315408,r315427,r315645,r315646,r315648,r315653,r315850,
r316064,r316078,r316079,r316100,r316104,r316111,r316112,r316171,r316279,
r316280,r316287,r316311,r316343,r316424,r316436

r311458: Use compiler driver to link BERI boot loaders

r312237: loader.efi: find_currdev() can leak memory

r312314: loader: move device path definitions to include/efidevp.h

r312374: loader: efi devpath api usage should be more aware of NULL pointers

r312947: Remove "-Xassembler -G0" from CFLAGS.

r313042: loader.efi environment related cleanups

r313047: loader: disk/part api needs to use uint64_t offsets

r313166: loader: libefi/env.c warnings in arm build

r313328: loader: Implement disk_ioctl() to support DIOCGSECTORSIZE and
DIOCGMEDIASIZE.

r313332: loader: bcache read ahead block count should take account the large
sectors

r313333: loader: Replace EFI part devices.

r313337: loader: 313329 missed ZFS guard in loader/main.c

r313348: loader: biosdisk fix for 2+TB disks

r313349: loader: disk io should not use alloca()

r313389: efipart is also using the '%S' printf format, add -Wno-format for
it.

r313442: loader: possible NULL pointer dereference in efipart.c

r313451: loader: possible NULL pointer dereference in bcache.c

r313575: makefs: make the buffer functions look exactly like the kernel ones

r313645: loader: implement MEDIA_FILEPATH_DP support in efipart

r313710: loader: cstyle fixes and DIOCGMEDIASIZE should use uint64_t

r314114: Use LDFLAGS with CC instead of _LDFLAGS.

r314213: Remove control+r handling from geliboot's pwgets()

r314275: Remove unused macro from common/drv.c.

r314945: Some style(9) fixes. No functional changes.

r314948: Try to extract the RFC1048 data from PXE.

r315008: r314948 seems to be missing a variable or two that will break

r315408: loader: remove open_disk cache

r315427: loader: biosdisk should report IO error from INT13

r315645: loader: disk_cleanup was left in userboot_disk.c

r315646: loader: pxe.h constants have wrong values

r315648: libstand: verify value provided by nfs.read_size

r315653: loader: verify the value from dhcp.interface-mtu and use snprintf
o set mtu

r315850: The original author abused Nd (one-line description, used by
makewhatis)

r316064: Fix build with path names with 'align' or 'nop' in them.

r316078: gpt*boot: Save a bit more memory when LOADER_NO_GELI_SUPPORT is
specified

r316079: Simply retire the sedification of the boot2.s file.

r316100: Remove -fno-guess-branch-probability and -fno-unit-at-a-time.

r316104: Use `NO_WCAST_ALIGN` instead of spelling it out as -Wno-cast-align
in CFLAGS

r316111: loader: move bios getsecs into time.c

r316112: loader: ls command should display file types properly

r316171: xfsread inlined uses more space, so remove the inline tag.

r316279: loader: efipart should check disk size from partition table

r316280: loader: simplify efi_zfs_probe and avoid double probing for zfs.

r316287: Remove OLD_NFSV2 from loader and libstand

r316311: Add explicit_bzero() to libstand, and switch GELIBoot to using it

r316343: Implement boot-time encryption key passing (keybuf)

r316424: Fix sparc64 build broken by r316343 and r316076

r316436: Restore EFI boot environment functionality broken in r313333

PR: 216940 217298 217935

MFC r307322,r307323,r307324,r307326,r307327,r307338,r307879,r307908,r307911,
r307942,r307950,r307951,r307954,r307955,r308125,r308195,r308476,r308534,
r308535,r308776,r308843,r310236,r310726: Loader fixes, 2016q4

r307322: Remove /boot/boot.conf, deprecated for 16 years

r307323: Remove fetching of pInterp.

r307324: Create a new linker set, Xficl_compile_set which contains a list of
functions to call to register new forth words.

r307326: In UEFI mode expose the SMBIOS anchor base address via kenv

r307327: Update i386 build of loader.efi (but leave it disabled) so that we
at least build it now.

r307338: Create a pcibios-version environment FORTH word.

r307879: Preliminary support for EFI in boot loader.

r307908: Fix the build on both arm64 and when WITHOUT_FORTH is defined.

r307911: Add better comment...

r307942: Really make WITHOUT_FORTH (MK_FORTH==no) work.

r307950: Add it (Makefile.ficl) to the right place

r307951: Fix two backwards tests.

r307954: Back out the move to the loader script from -N.

r307955: LIBSTAND goes last, so put it last here too.

r308125: In loader.efi, instead of exiting directly, try to fallback.

r308195: efinet_dev_print should honor verbose option.

r308476: boot/forth spelling issue in forth word

r308534: The file_loadraw function grew an argument, update install function

r308535: Add support for LOADER_RC setting in the pkgfs manifes

r308776: loader: zfs toplevel vdev must have spa set.

r308843: loader: smbios version check is not correct

r310236: Renumber license clauses to avoid skipping #3

r310726: cdboot: add explict suffix to ambiguous or instruction

PR: 214375

MFC r308774: loader: beri_sdcard_disk_print() needs to return int.

r308434 did change the return type for dv_print callbacks, but the return
type for beri_sdcard_disk_print() was left unchanged, causing compile errors.

MFC r308434, 308827

MFC r308434: Loader paged/pageable data is not always paged.
MFC r308827: lsdev device name section headers should be printed by dv_print
callback.

MFC (conceptually) r328107: Add /boot/overlays

This is a direct commit to stable/11, due to path changes in HEAD. Diffs
have been applied on top of stable/11, with exception to the change to
forth/loader.conf. forth/loader.conf has seen additional changes in HEAD
mthat are not being MFC'd to stable/11, so the addition of /boot/overlays to
its module_path is not necessary.

MFC r328107: stand: Add /boot/overlays for separation of overlays from DTB

This matches directory structure used commonly in Linux-land, and it's
cleaner than mixing overlays into the existing module paths. Overlays are
still mixed in by specifying fdt_overlays in loader.conf(5).

MFC r303442, r305343: remove CONSTRUCTORS from linker scripts

r303442: remove CONSTRUCTORS from kernel linker scripts

r305343: remove CONSTRUCTORS from MIPS uboot linker script

The linker script CONSTRUCTORS keyword is only meaningful "when linking
object file formats which do not support arbitrary sections, such as
ECOFF and XCOFF"[1] and is ignored for other object file formats.

LLVM's lld does not yet accept (and ignore) CONSTRUCTORS, so just remove
CONSTRUCTORS from the linker script as it has no effect.

[1] https://sourceware.org/binutils/docs/ld/Output-Section-Keywords.html

Reported by: andrew
Sponsored by: The FreeBSD Foundation

MFC r309369,310850,310853:

libstand: dosfs cstyle cleanup for return keyword.
dosfs support in libstand is broken since r298230

PR: 214423
Submitted by: Mikhail Kupchik
Reported by: Mikhail Kupchik
Approved by: imp (mentor)

MFC r310267: Deduplicate loader vers.c Makefile rules

The Makefile rule to create vers.c for loader version info was
previously duplicated in each of the various loader Makefiles.
Instead, share a common rule in Makefile.inc.

Sponsored by: The FreeBSD Foundation

MFC r310225: Reduce boot loader version string duplication

Instead of repeating "%s, Revision %s" "(%s %s)" in each loader, just
create the full version string in vers.c

MFC r307238:

Stop closing the network device when netbooting for loaders using the common
dev_net.c code.

The NETIF_OPEN_CLOSE_ONCE flag was added in r201932 to prevent that behaviour
on some architectures (sparc64 and powerpc64) the default was left to always
open and close the device for each open and close of a file by the loader
because it was necessary for u-boot on arm.

Since it has been added, the flag was turned on for every arches including the
u-boot loader for arm.

This also fixes netbooting on RPi3 (tested by gonzo@)

For the loader.efi it greatly speeds up netbooting

Reviewed by: emaste, gonzo, tsoome
Approved by: gonzo
MFC after: 1 month
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D8230

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

sys: use our roundup2/rounddown2() macros when param.h is available.

rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.

This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.

sys/boot: use our nitems() macro when it is available through param.h.

No functional change, only trivial cases are done in this sweep,

Discussed in: freebsd-current

A new implementation of the loader block cache

The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.

Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.

Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij (previous version), emaste (previous version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4713

This review aims at introducing ubldr (loader with U-Boot interface) for MIPS
(32 and 64-bit, LE and BE).
The changes were tested with QEMU's 'mips' target.

Most of the implementation was lifted from the ARM version, the appropriate
MIPS-specific things were implemented.

With these changes I am able to go all the way through the u-boot->ubldr->kernel
boot chain in QEMU on all combinations of bit-ness and endian-ness.

For the tests I've used FAT32 disk images (as FAT32 is supported by U-boot),
which include /boot/kernel/kernel and /boot/kernel/ubldr.bin

In U-boot I do:
fatload ide 0 <LOAD_ADDR> /boot/kernel/ubldr.bin; go <LOAD_ADDR>
where LOAD_ADDR is 80800000 for 32-bit and ffffffff80800000 for 64-bit

Then it's the usual ubldr that takes over and loads and starts a kernel.

Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5313

Currently BERI's loader is including the 32-bit version of the FICL MIPS sysdep.h (sys/boot/ficl/mips/sysdep.h) instead of the 64-bit version (sys/boot/ficl/mips64/sysdep.h).

Although this may not be an issue in practice, it would be more correct if the 64-bit version was used. Also, using the 64-bit version would make it easier to add support for 64-bit ubldr on MIPS.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5310

Fix mistake when transitioning to the new defines with ZFS loader. I
hate adding yet another define, but it is the lessor of the evil
choices available. Kill another evil by removing PATH_BOOT3 and
replacing it with PATH_LOADER or PATH_LOADER_ZFS as appropriate.

PR: 206659

Remove static from these two. They slipped through the cracks.

MFC After: 1 week

RBX_ defines are in rbx.h, move it there.

Differential Revision: https://reviews.freebsd.org/D5038

Move all the separate copies of the same strings into paths.h. There's
nothing machine specific about these.

Differential Revision: https://reviews.freebsd.org/D5038

Increase BERI boot components section alignment to 16

The .text, .bss, and .data sections claimed 16-byte alignment, but were
only aligned to 8 by the linker script.

Discovered with elfcopy(1) from elftoolchain, which performs validation
absent from the binutils strip(1). ELF tool chain ticket #512.

Reported by: brooks
Reviewed by: brooks
Sponsored by: DARPA, AFRL

Remove guards around overwriting loader.rc and menu.rc

There have been .local version of each for user modifications for some time
This allows users to receive future updates to these files

PR: 183765
Submitted by: Bertram Scharpf, Nikolai Lifanov (patch)
Reviewed by: dteske, loos, eadler
Approved by: bapt (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3176

Fix fallouts from r284590

Reported by: kib

Fix mips build, really. :-(

Revert .PATH changes to fix mips build.

Reported by: bz
Pointy hat to: jkim

Install newly added brand-*.4th and logo-*.4th files and reduce duplication.

Reviewed by: dteske
Pointy hat to: dteske

Ensure the cross assembler, linker and objcopy are used for the build32
stage, just like for the regular world stage.

Reviewed by: rodrigc, imp, bapt, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D2187

Increase BERI loader section alignment to 16

The .text, .bss, and .data sections claimed 16-byte alignment, but were
only aligned to 8 by the linker script.

Discovered with strip(1) from elftoolchain, which performs validation
absent from the binutils strip(1).

Sponsored by: DARPA, AFRL

Revert r267233 for now. PIE support needs to be reworked.

1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.

We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.

Reported by: kib

Give loaders more control over the Forth initialization process. In
particular, allow loaders to define the name of the RC script the
interpreter needs to use. Use this new-found control to have the
PXE loader (when compiled with TFTP support and not NFS support)
read from ${bootfile}.4th, where ${bootfile} is the name of the
file fetched by the PXE firmware.

The normal startup process involves reading the following files:
1. /boot/boot.4th
2. /boot/loader.rc or alternatively /boot/boot.conf

When these come from a FreeBSD-defined file system, this is all
good. But when we boot over the network, subdirectories and fixed
file names are often painful to administrators and there's really
no way for them to change the behaviour of the loader.

Obtained from: Juniper Networks, Inc.

Reviewed by: imp

LDFLAGS is supposed to be given to CC not LD.
Define _LDFLAGS as a filtered version of LDFLAGS safe to give to LD

In preparation for ASLR [1] support add WITH_PIE to support building with -fPIE.

This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.

Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]

Mark known build failures as NO_PIE for now.

The only known runtime failure was rtld.

[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]

Add optional support for USB to BERI loader. Fix the linker script so
that the garbage collection feature can be used when linking.

Sponsored by: DARPA, AFRL

Fix delay() function in the BERI loader code.

Reviewed by: brooks @
Sponsored by: DARPA, AFRL

Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.

NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.

Build the BERI boot loader on 64-bit MIPS (but not 32-bit MIPS). While
these binaries aren't immediately useful on other MIPSes, still build them
as part of mips64 world in order to expose them to tinderbox.

MFC after: 3 weeks
Sponsored by: DARPA, AFRL

Temporarily unhook BERI boot loader from the build until 32-bit MIPS
properly excludes building our 64-bit only boot-loader adaptation.

Replace Apache-style license on two Makefiles with stock 2-clause BSD;
license, although the former is pretty safe, it wasn't intended to be
used in the version of MIPS boot2/loader upstreamed to FreeBSD.

MFC after: 3 weeks
Sponsored by: DARPA, AFRL

Commit a first cut at ports of boot2 and loader to 64-bit MIPS, with a
particular interest in (and support for) SRI International and the
University of Cambridge's BERI FPGA soft-core processor. This includes
micro device drivers for the Altera JTAG UART console, memory-mapped
flash, and the Altera SD Card IP core in both boot2 and loader. boot2
can be written to the on-board Intel StrataFlash on the DE4 board, and
loader can be placed in StrataFlash or the SD Card.

Plenty of XXX comments, but works quite well locally in practice and I
am using it daily. Although I had originally ported the ARM version
of boot2, the current version is x86-derived as that proved more
feature-complete. As we don't currently use partitions on our flash
disks, support for that has been commented out relative to x86, but
would be easy to add back. FDT support has not yet been hooked up,
although some skeleton parts have been put in place for that.

This may well be a useful starting point for ports to other 32-bit and
64-bit MIPS-ISA systems.

This merge is synchronised to CheriBSD github commit
e41d74fd719525d4dd7a7ee499114679165eeaf6, but with some additions of
$FreeBSD.

MFC after: 3 weeks
Sponsored by: DARPA, AFRAL