358804 |
09-Mar-2020 |
emaste |
MFC r358554: Add deprecation notices to ctau and cx drivers
These support outdated or obsolete ISA WAN (T1/E1) sync serial cards, and these drivers haven't really been touched (other than in tree-wide sweeps to keep them building) for 15+ years.
Related PCI devices ce and cp are still in the tree, with deprecation proposed in D23928.
Relnotes: Yes Sponsored by: The FreeBSD Foundation |
347962 |
18-May-2019 |
brooks |
MFC r339703, r347365, r347703, r347940
r339703: Deprecate a number of less used 10 and 10/100 Ethernet devices.
The current deprecated list is: ae, bm, cs, de, dme, ed, ep, ex, fe, pcn, sf, sn, tl, tx, txp, vx, wb, xe
The list as refined as part of FCP-0101. Per the FCP, devices may be removed from the deprecation list if enough users are found or they are converted to iflib.
FCP: https://github.com/freebsd/fcp/blob/master/fcp-0101.md
r347365: Update dme(4) to reflect that it will not be removed due to FCP-101.
dme(4) is the built-in NIC on a couple non-expandable mips platforms and thus should remain. The FCP has been updated to reflect this fact.
Discussed with: imp
r347703: FCP-101: ae(4) is sufficently popular to be moved to the keep list.
r347940: Remove the notice that ae(4) will be removed in FreeBSD 13.
MFC requested by: rgrimes Approved by: re (kib) |
320921 |
12-Jul-2017 |
jhb |
Add deprecation notices for various device drivers removed in 12.0.
This is a direct commit to stable/11 since these files have already been removed in head.
Reviewed by: sbruno, gjb Differential Revision: https://reviews.freebsd.org/D11542 |
302408 |
08-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
298107 |
16-Apr-2016 |
gjb |
Merge the projects/release-pkg branch to head.
This allows packaging the base system with pkg(8), including but not limited to providing the ability to provide upstream binary update possibilities for non-tier-1 architectures.
This merge is a requirement of the 11.0-RELEASE, and as such, thank you to everyone that has tested the project branch.
Documentation in build(7) etc. is still somewhat sparse, but updates to those parts will follow.
Sponsored by: The FreeBSD Foundation
|
288228 |
25-Sep-2015 |
bdrewery |
META_MODE: Remove DEP_MACHINE from Makefile.depend files.
This has not been needed since r246865 in projects/bmake.
Sponsored by: EMC / Isilon Storage Division
|
288226 |
25-Sep-2015 |
bdrewery |
META_MODE: Remove DEP_RELDIR from Makefile.depend files.
This has not been needed since r284171 in projects/bmake.
Sponsored by: EMC / Isilon Storage Division
|
286663 |
12-Aug-2015 |
brueffer |
Fix mandoc warnings/errors.
MFC after: 1 week
|
284345 |
13-Jun-2015 |
sjg |
Add META_MODE support.
Off by default, build behaves normally. WITH_META_MODE we get auto objdir creation, the ability to start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796 Reviewed by: brooks imp
|
279054 |
20-Feb-2015 |
brueffer |
Properly mark up author name.
|
276292 |
27-Dec-2014 |
joel |
mdoc: improvements to SEE ALSO.
|
267938 |
26-Jun-2014 |
bapt |
use .Mt to mark up email addresses consistently (final part)
PR: 191174 Submitted by: Franco Fichtner <franco at lastsummer.de>
|
251298 |
03-Jun-2013 |
emaste |
Switch to 2-clause license
Approved by: luigi@
|
250239 |
04-May-2013 |
gavin |
Kill yet another reference to UserConfig
|
236443 |
02-Jun-2012 |
joel |
mdoc: minor Bl improvements.
|
233992 |
07-Apr-2012 |
joel |
mdoc: fix column names, indentation, column separation within each row, and quotation. Also make sure we have the same amount of columns in each row as the number of columns we specify in the head arguments.
Reviewed by: brueffer
|
233648 |
29-Mar-2012 |
eadler |
Remove trailing whitespace per mdoc lint warning
Disussed with: gavin No objection from: doc Approved by: joel MFC after: 3 days
|
228743 |
20-Dec-2011 |
mav |
Add some more cross-references.
|
221961 |
15-May-2011 |
brix |
Add I2C bus driver for the AMD Geode LX series CS5536 Companion Device.
Reviewed by: jhb (newbus bits only), adrian
|
220240 |
01-Apr-2011 |
imp |
Minor tweaks to the man page: o Remove bogus ordering info o 3C1 actually works, so remove that o Add warning about making sure BIOS is configured properly for PnP configured 3c509 cards.
|
214054 |
19-Oct-2010 |
uqs |
mdoc: drop even more redundant .Pp calls
No change in rendered output, less mandoc lint warnings.
Tool provided by: Nobuyuki Koganemaru n-kogane at syd.odn.ne.jp
|
211397 |
16-Aug-2010 |
joel |
Fix typos, spelling, formatting and mdoc mistakes found by Nobuyuki while translating these manual pages. Minor corrections by me.
Submitted by: Nobuyuki Koganemaru <n-kogane@syd.odn.ne.jp>
|
208027 |
13-May-2010 |
uqs |
mdoc: move CAVEATS, BUGS and SECURITY CONSIDERATIONS sections to the bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put them.
Found by: mdocml lint run Reviewed by: ru
|
203692 |
08-Feb-2010 |
gavin |
Kernel modules for these drivers are installed on all platforms, so install the man pages on all platforms too.
|
203689 |
08-Feb-2010 |
gavin |
Install the padlock(4) man page on amd64 as well as i386, to match the platforms where the driver itself is compiled and installed.
PR: docs/130895 Reported by: George Hartzell <hartzell alerce.com> MFC after: 1 week
|
202386 |
15-Jan-2010 |
ru |
Use the newly brought %U macro.
|
197042 |
09-Sep-2009 |
bz |
Remove dpms.4 missed in r197025.
|
197025 |
09-Sep-2009 |
delphij |
- Teach vesa(4) and dpms(4) about x86emu. [1] - Add vesa kernel options for amd64. - Connect libvgl library and splash kernel modules to amd64 build. - Connect manual page dpms(4) to amd64 build. - Remove old vesa/dpms files.
Submitted by: paradox <ddkprog yahoo com> [1], swell k at gmail.com (with some minor tweaks)
|
191414 |
23-Apr-2009 |
brueffer |
Correct the information about when the respective functionality first appeared in FreeBSD.
PR: 133785 Submitted by: Ulrich Spoerlein <uqs@spoerlein.net> MFC after: 3 days
|
191139 |
16-Apr-2009 |
rwatson |
Remove man pages ar(4), ray(4), and sr(4) following removal of these non-MPSAFE device drivers.
|
190428 |
25-Mar-2009 |
imp |
Add recently added cards.
|
182912 |
10-Sep-2008 |
jhb |
Resurrect the sbni(4) driver. Someone finally tested the MPSAFE patches and the driver worked ok with them.
Tested by: friends of yar
|
182081 |
23-Aug-2008 |
jhb |
Add a very simple dpms(4) driver that uses the VESA BIOS DPMS calls to turn off the external display during suspend and restore it to its original state on resume.
MFC after: 2 weeks
|
181967 |
21-Aug-2008 |
rpaulo |
Merge the relevant information of man4.i386/ichwd.4 into man4/ichwd.4 and remove ichwd(4) man page from man4.i386.
Submitted by: gavin Reviewed by: des, me Approved by: des
|
181942 |
21-Aug-2008 |
rpaulo |
Move man pages out of man4.i386. Most of them are applicable to amd64 too, so, instead of descending to the i386 directory, we add some magic to the parent Makefile. These man pages refer to drivers that I'm aware that work on amd64. Most likely there are more, but I'll deal with them later.
Approved by: brueffer, philip, takawata
|
181923 |
20-Aug-2008 |
rpaulo |
Add Eee PC.
|
181594 |
11-Aug-2008 |
brueffer |
Correct a few minor markup and grammar issues.
|
181469 |
09-Aug-2008 |
philip |
Typo: glxsb(4) was imported to FreeBSD 8.0, not 7.0.
Spotted by: kib
|
181468 |
09-Aug-2008 |
philip |
Add the glxsb(4) manual page.
Submitted by: Patrick Lamaizière <patfbsd -at- davenulle.org> MFC after: 1 week
|
180265 |
04-Jul-2008 |
jhb |
Remove the sbni(4) driver. No one responded to calls to test it on current@ and stable@.
|
180259 |
04-Jul-2008 |
jhb |
Remove the oltr(4) driver. No one responded to calls for testing on current@ and stable@ for the locking patches. The driver can always be revived if someone tests it.
This driver also sleeps in its if_init routine, so it likely doesn't really work at all anyway in modern releases.
|
180257 |
04-Jul-2008 |
jhb |
Remove the arl(4) driver. It is reported to not work on 6.x or later even though the driver hasn't changed since 4.x (last known working release).
|
179138 |
20-May-2008 |
kevlo |
Document the azp for controlling audio power
|
177443 |
20-Mar-2008 |
brueffer |
Oops, add back the SYNOPSIS section header I accidently removed in the previous revision.
|
177293 |
17-Mar-2008 |
brueffer |
Use a standard section 4 SYNOPSIS.
MFC after: 3 days
|
177292 |
17-Mar-2008 |
brueffer |
Device counts are long gone.
MFC after: 3 days
|
177284 |
16-Mar-2008 |
brueffer |
Fix AUTHORS formatting.
MFC after: 3 days
|
177282 |
16-Mar-2008 |
brueffer |
Device counts are long gone, also remove the outdated FILES section.
MFC after: 3 days
|
175765 |
28-Jan-2008 |
brueffer |
Remove references to the obsolete card(4) manpage.
|
175045 |
01-Jan-2008 |
imp |
Minor nits. Add xr to sn.
|
171696 |
02-Aug-2007 |
bz |
Remove the last entries to fast_ipsec. Merge in parts of the old fast_ipsec.4 man page to ipsec.4 and start updating ipsec.4 man page.
Reviewed by: brueffer, sam (slightly earlier versions), bmah Approved by: re (bmah)
|
170216 |
02-Jun-2007 |
philip |
Add support for Asus A3N laptops.
Submitted by: Holger Jorra <holger_jorra -at- gmx.net> MFC after: 1 day
|
168094 |
30-Mar-2007 |
takawata |
New line for new sentense.
Pointed out by: brueffer
|
168092 |
30-Mar-2007 |
takawata |
Hook acpi_aiboost man page and modify the man page a bit.
|
168091 |
30-Mar-2007 |
takawata |
Add man page for acpi_aiboost. Based on man page for NetBSD.
|
166790 |
16-Feb-2007 |
brueffer |
Xref altq(4)
|
166610 |
09-Feb-2007 |
brueffer |
Remove references to pccardd(8), pccardc(8) and OLDCARD.
PR: 108980 Submitted by: Yonatan
|
166346 |
30-Jan-2007 |
brueffer |
Xref altq(4) for drivers that support it according to altq(4).
|
165218 |
14-Dec-2006 |
mpp |
Spelling fix.
|
164789 |
01-Dec-2006 |
ru |
Add missing `;;' in the example shell code snippet.
PR: i386/106113 Submitted by: Richard Arends MFC after: 3 days
|
163856 |
01-Nov-2006 |
kevlo |
Document the cdp for controlling CD power.
Approved by: cognet
|
163304 |
13-Oct-2006 |
trhodes |
Point users to ndisgen(8) over directly interacting with ndiscvt(8) as the former is easier to use.
PR: 97231
|
163288 |
13-Oct-2006 |
ru |
Deal with two more references to non-existing ndisapi(9).
|
163285 |
13-Oct-2006 |
trhodes |
Kill reference to ndisapi.9 here as well, it doesn't exist.
PR: 82114
|
162871 |
30-Sep-2006 |
ru |
Revise markup.
|
162797 |
29-Sep-2006 |
bms |
Nits.
Submitted by: ru
|
162794 |
29-Sep-2006 |
bms |
Push removal of mrouted down to the rest of the tree.
|
162404 |
18-Sep-2006 |
ru |
Markup fixes.
|
160782 |
28-Jul-2006 |
pjd |
Update manual page.
|
160502 |
19-Jul-2006 |
mr |
Reflect the additional support of C7 CPU's in padlock(4).
Submitted by: brueffer MFC after: 1 day
|
159740 |
18-Jun-2006 |
netchild |
2 spelling fixes...
Noticed by: John E Hein <jhein@timing.com>
|
159729 |
18-Jun-2006 |
netchild |
- xref linsysfs - improve the ldconfig part - tell about pitfalls with the osrelease sysctl
|
159280 |
05-Jun-2006 |
pjd |
- Document that padlock(4) pretends to accelerate HMAC algorithms. - Remove "device cryptodev" as it is not needed for compiling padlock(4) into the kernel. Actually it is not advisable, because padlock instructions can be used directly from userland, so passing the work through the kernel is a bad idea.
|
158550 |
14-May-2006 |
gnn |
Remove the documentation from the Makefile as well.
|
158548 |
14-May-2006 |
gnn |
Remove documentation for the deprecated lnc driver.
Reviewed By: simon
|
157610 |
09-Apr-2006 |
philip |
Sync acpi_asus(4) manual with the code.
Reminded by: brueffer X-MFC after: 3 days (or so)
|
157546 |
05-Apr-2006 |
brueffer |
Revert the backout in the last revision, it was committed to the wrong branch.
Pointy hat to: brueffer
|
157545 |
05-Apr-2006 |
brueffer |
Back out the fan control changes that were merged in revision 1.2.2.5. The necessary changes to the driver haven't been merged yet, which won't happen before 6.1-RELEASE.
Submitted by: markus Approved by: re (scottl)
|
157365 |
01-Apr-2006 |
brueffer |
Convert the SYNOPSIS section to look like the ones used in other driver manpages, mention module support.
MFC after: 3 days
|
157355 |
01-Apr-2006 |
brueffer |
Mention the module in the synopsis.
|
155788 |
17-Feb-2006 |
brueffer |
Belatedly bump the date for the fan control changes in rev. 1.9.
|
155588 |
12-Feb-2006 |
brueffer |
- Use consistent capitalization for ThinkLight - Xref led(4)
MFC after: 3 days
|
155181 |
01-Feb-2006 |
joel |
Expand contractions.
|
155159 |
31-Jan-2006 |
rik |
Attach ce(4) to the build.
MFC after: 3 days
|
155158 |
31-Jan-2006 |
rik |
Remove duplicate model entry.
|
155066 |
30-Jan-2006 |
rik |
Add manual page for Cronyx Tau-PCI/32 ce(4) driver.
|
155029 |
30-Jan-2006 |
brueffer |
Note support for the A4D and A6VM models.
|
154327 |
14-Jan-2006 |
markus |
- Document the latest changes for controlling the fan - s/Thinklight/ThinkLight/ in two cases
Approved by: brueffer MFC after: 1 week
|
153942 |
31-Dec-2005 |
brueffer |
Update for new devices, including the AMD 8111. Also mention amdsmb(4) for SMBus 2.0 functionality of the AMD 8111.
|
153741 |
26-Dec-2005 |
sobomax |
Remove kern.elf32.can_exec_dyn sysctl. Instead extend Brandinfo structure with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually allow executing elf dynamic binaries (aka shared libraries). When it is requested to execute ET_DYN elf image check if this flag is on after we know the elf brand allowing execution if so.
PR: kern/87615 Submitted by: Marcin Koziej <creep@desk.pl>
|
153582 |
20-Dec-2005 |
imp |
Mention PC Card support for the cs device
|
153289 |
10-Dec-2005 |
brueffer |
Manpage for the padlock driver (VIA C3/Eden AES support and RNG).
MFC after: 3 days
|
152755 |
24-Nov-2005 |
joel |
s/5.5/6.0/ in HISTORY section.
Discussed with: ru
|
152578 |
18-Nov-2005 |
jkoshy |
Cross-reference hwpmc(4).
|
152576 |
18-Nov-2005 |
ru |
Fix warning, sort sections.
|
152569 |
18-Nov-2005 |
ru |
-mdoc sweep.
|
152437 |
14-Nov-2005 |
cognet |
Briefly document the use of kern.elf32.can_exec_dyn.
MFC after: 3 days
|
152306 |
11-Nov-2005 |
ru |
Add /dev/speaker support to amd64.
The following repo-copies were made (by Mark Murray):
sys/i386/isa/spkr.c -> sys/dev/speaker/spkr.c sys/i386/include/speaker.h -> sys/dev/speaker/speaker.h share/man/man4/man4.i386/spkr.4 -> share/man/man4/spkr.4
|
152109 |
06-Nov-2005 |
philip |
Change author's email address.
Submitted by: Sean Bullington shegget -at- gmail.com
|
151046 |
07-Oct-2005 |
trhodes |
Work around an apparent mdoc(7) bug.
Spotted by: marius Discussed with: ru
|
150445 |
22-Sep-2005 |
keramida |
Remove the OPTIONS section, since it only documents FE_DEBUG and wrongly so. If the full list of fe(4) options is documented we can revive the entire section.
PR: docs/86228 Submitted by: n-kogane@syd.odn.ne.jp Helped by: Masahiro Sekiguchi <seki@jp.fujitsu.com> MFC after: 1 week
|
150277 |
18-Sep-2005 |
brueffer |
Sort list of supported hardware.
MFC after: 3 days
|
150118 |
14-Sep-2005 |
brueffer |
Hook up acpi_sony.4
|
150117 |
14-Sep-2005 |
brueffer |
Manpage for the acpi_sony(4) driver. This is more of a dummy page at the moment, but better than nothing.
MFC after: 3 days
|
149530 |
27-Aug-2005 |
marius |
Remove the man page of the recently axed el(4).
|
149477 |
25-Aug-2005 |
imp |
Clarify the confusion over Farallon cards taht differ only by arrow color
|
149394 |
23-Aug-2005 |
markus |
- Document the led(4) interface for the Thinklight - Bump .Dd
Approved by: brueffer MFC after: 3 days
|
148967 |
11-Aug-2005 |
markus |
- Clarify how events are used and how the different event sysctl correlate - Document how an event looks like that is received by devd(8) from acpi_ibm(4) - Document the event codes as they occur on a T41p - Add a note about sysctl.conf and an Xref to it - Add an example section providing an example script and an entry for devd.conf. This is an adapted version of the one in acpi_fujitsu(4). - s/Fn-F4/Fn+F4/ for consistency sake - Add a button description where refering to a T41p, remove it otherwise, since it might vary from model to model - Bump .Dd
Thanks for improvements to: brueffer, ru
Approved by: brueffer
|
148580 |
31-Jul-2005 |
keramida |
Fix all the spelling mistakes I could find in the man pages for words that have at least 3 characters.
MFC after: 1 week Thanks to: Music band ``Chingon'' for keeping me company while searching for these.
|
148220 |
21-Jul-2005 |
trhodes |
Break long lines and kill a few instances of EOL whitespace.
Noticed by: ru
|
148145 |
19-Jul-2005 |
trhodes |
Add a "Load module on start up" comment, similar to mac_*.4 pages[1]. Quote .Cd and .Nd text. Bump doc date.
Requested by: some user through ru Supported by: ru, dwmalone, brueffer
|
148066 |
15-Jul-2005 |
hrs |
Fix typos and use consistent section names in manual pages:
s/SYSCTLS/SYSCTL VARIABLES/ s/TUNABLES/LOADER TUNABLES/ s/CAVEAT/CAVEATS/ s/DESCIPTION/DESCRIPTION/
Reviewed by: ru MFC after: 3 days
|
148021 |
15-Jul-2005 |
imp |
Mention the PC Card devices known to work with this driver, as well as some of the bugs there with.
|
147872 |
10-Jul-2005 |
imp |
Add a boatload of new device ids, gleaned from the pcmcia-cs-3.2.8 distribution. Add the appropriate devices to the man pages.
Obtained from: pcmcia-cs Approved by: re (scottl)
|
147716 |
01-Jul-2005 |
imp |
Update the diagnostics section with all the messages from the driver as of this date. Bump the date as well.
Approved by: re (scottl) blanket ep
|
147447 |
16-Jun-2005 |
brueffer |
Remove the obsolete device count.
Approved by: re (blanket) MFC after: 3 days
|
147441 |
16-Jun-2005 |
ru |
Markup fixes.
Approved by: re (blanket)
|
147432 |
16-Jun-2005 |
ru |
(Mostly) markup fixes.
Approved by: re (blanket)
|
147411 |
16-Jun-2005 |
brueffer |
Remove Xref to nonexistant smapi(9).
Submitted by: markus Approved by: re (blanket) MFC after: 3 days
|
147197 |
09-Jun-2005 |
markus |
Document recent driver changes.
Reviewed by: brueffer, ru Approved by: brueffer Thanks to: brueffer and ru for improving my not existing manpage-foo, Arne Schwabe <arne@rfc2549.org> and Kevin Oberman <oberman@es.net> for details on thermal sensor location
|
146024 |
09-May-2005 |
philip |
Sync with Linux acpi4asus, adding support for loads of new models.
MFC after: 3 days
|
146023 |
09-May-2005 |
philip |
Put the time traveling machine back where I found it before anyone sees. ;-)
Pointy hat to: philip
|
146022 |
09-May-2005 |
philip |
Add support for Asus V6V[1] and W1N notebooks.
Submitted by: Jean-Sébastien Pédron <jspedron@club-internet.fr> [1] MFC after: 3 days
|
146014 |
08-May-2005 |
imp |
One more variant branding of 3C574 family: the plain old 3c574
|
145983 |
07-May-2005 |
brueffer |
Manual page for the acpi_ibm(4) hotkey driver.
|
143883 |
20-Mar-2005 |
philip |
Document acpi_fujitsu(4).
Reviewed by: brueffer
|
143782 |
18-Mar-2005 |
brueffer |
Further refine information about supported hardware (from the hardware notes).
|
143779 |
18-Mar-2005 |
brueffer |
- add a HARDWARE section - correct a language nit - remove outdated FILES section - bump .Dd
MFC after: 3 days
|
143673 |
16-Mar-2005 |
brueffer |
Chase location of scd.c and bump .Dd.
Submitted by: markus MFC after: 3 days
|
141851 |
13-Feb-2005 |
ru |
Expand contractions.
|
141846 |
13-Feb-2005 |
ru |
Expand *n't contractions.
|
141707 |
12-Feb-2005 |
brueffer |
No one cares about when the manpage first appeared. Mention when the driver appeared instead.
MFC after: 3 days
|
141580 |
09-Feb-2005 |
ru |
Fixed the misplaced $FreeBSD$.
|
141361 |
05-Feb-2005 |
brueffer |
Remove last traces of le.4
MFC after: 3 days
|
141228 |
04-Feb-2005 |
brueffer |
Manpage for Olicom Token Ring adapters, based on input by mdodd.
Reviewed by: mdodd MFC after: 1 week
|
140561 |
21-Jan-2005 |
ru |
Sort sections.
|
140426 |
18-Jan-2005 |
brueffer |
Capitalize Windows and fix a typo.
Submitted by: markus MFC after: 3 days
|
140246 |
14-Jan-2005 |
dds |
Fix the pbio include file installation process and the corresponding documentation.
Noticed by: ru Reviewed by: ru
|
140228 |
14-Jan-2005 |
ru |
Markup fixes.
|
140227 |
14-Jan-2005 |
ru |
Markup fixes.
|
139971 |
10-Jan-2005 |
brueffer |
- add the Eagle Tech NE200T - bump .Dd
|
139663 |
04-Jan-2005 |
imp |
There's no longer a wd driver.
|
139593 |
02-Jan-2005 |
krion |
Remove trailing spaces.
MFC after: 3 days
|
139097 |
21-Dec-2004 |
brueffer |
(fast) ethernet -> (Fast) Ethernet
MFC after: 3 days
|
138740 |
12-Dec-2004 |
rik |
Add information about 4.11 release.
|
138736 |
12-Dec-2004 |
rik |
Add Tau-PCI-L(/R) to list of supported hardware.
|
137469 |
09-Nov-2004 |
njl |
Update the manpage for acpi_panasonic for new models supported.
Submitted by: OGAWA Takaya MFC after: 1 day
|
137388 |
08-Nov-2004 |
philip |
Add support for gadgets on Asus L4R and M6R notebooks.
|
137247 |
05-Nov-2004 |
philip |
Sync acpi_asus(4) manual with reality.
|
136231 |
07-Oct-2004 |
imp |
Ooops. Forgot the man page for pbio.4 in my port from RELENG_4.
|
136085 |
03-Oct-2004 |
simon |
Add a SYNOPSIS section for io(4), mem(4), or random(4), since they are now optional devices.
MFC after: 1 week
|
135457 |
19-Sep-2004 |
ru |
The checksum code has been fixed; reflect this is a manpage.
|
135382 |
17-Sep-2004 |
dds |
Fix typo.
MFC after: 2 days
|
135140 |
13-Sep-2004 |
brueffer |
- remove device count - add a HARDWARE section - bump document date
MFC after: 3 days
|
134926 |
08-Sep-2004 |
brueffer |
We don't need device counts anymore. Also remove device.hints entries for ie1, to be in line with the other manpages.
MFC after: 3 days
|
134925 |
08-Sep-2004 |
brueffer |
We don't need device counts anymore
MFC after: 3 days
|
134825 |
05-Sep-2004 |
simon |
Add a HARDWARE section which lists supported devices based on the Hardware Notes.
MFC after: 3 days
|
134785 |
05-Sep-2004 |
brueffer |
- move list of supported devices into a HARDWARE section - sort the hardware list - misc fixes - bump document date
MFC after: 3 days
|
134784 |
05-Sep-2004 |
brueffer |
- add a HARDWARE section - misc fixes - bump document date
MFC after: 3 days
|
134777 |
04-Sep-2004 |
brueffer |
- the NEC PC-9801N-25 is supported as well - really sort the device list this time
MFC after: 3 days
|
134774 |
04-Sep-2004 |
simon |
Add a standard 2 clause BSD license.
Approved by: wilko MFC after: 3 days
|
134769 |
04-Sep-2004 |
simon |
- Properly capitalize Ethernet. - Add a HARDWARE section which lists supported devices.
MFC after: 3 days
|
134768 |
04-Sep-2004 |
simon |
- Add a HARDWARE section which lists supported devices.
MFC after: 3 days
|
134756 |
04-Sep-2004 |
brueffer |
- move list of supported adapters into a HARDWARE section - sort the device list - some minor fixes
MFC after: 3 days
|
134481 |
29-Aug-2004 |
des |
According to mdoc(7), HISTORY comes before AUTHORS.
MFC after: 3 days
|
134272 |
24-Aug-2004 |
brueffer |
- move the list of supported devices into a HARDWARE section - bump document date
|
134065 |
20-Aug-2004 |
trhodes |
Replace the ERRORS section with a DIAGNOSTICS section.
Requested by: ru
|
132968 |
01-Aug-2004 |
simon |
- Add a HARDWARE section which lists supported devices. - Minor cleanup of the device lists when I'm here anyway.
|
132612 |
24-Jul-2004 |
trhodes |
Move snc.4 over to the i386 section as it only deals with PC98 and i386. Bump .Dd and .Dt accordingly.
Requested by: ru
|
132501 |
21-Jul-2004 |
nyan |
Add the ACPI Panasonic extras driver.
Submitted by: OGAWA Takaya <t-ogawa@triaez.kaisei.org> and nyan
|
132000 |
12-Jul-2004 |
keramida |
Fix a typo that slipped in during my last commit to this file.
Submitted by: fox@vader.aacc.cc.md.us
|
131765 |
07-Jul-2004 |
keramida |
Fix various grammar knits.
PR: docs/66824 Submitted by: Michel Lavondes <fox@vader.aacc.cc.md.us> MFC after: 3 days
|
131753 |
07-Jul-2004 |
simon |
Remove double .Pp caused by p4 miss-merge.
|
131752 |
07-Jul-2004 |
simon |
Add a HARDWARE section.
For cx(4) this was based on information from the Hardware Notes.
OK'ed by: rik
|
131724 |
06-Jul-2004 |
ru |
mdoc(7) fixes.
|
131715 |
06-Jul-2004 |
ru |
Tiny markup fixes.
|
131635 |
05-Jul-2004 |
ru |
Fix the NAME section making whatis(1) happy in particular.
|
131594 |
04-Jul-2004 |
ru |
Sort SEE ALSO references (in dictionary order, ignoring case).
|
131530 |
03-Jul-2004 |
ru |
Mechanically kill hard sentence breaks and double whitespaces.
|
131472 |
02-Jul-2004 |
ru |
Removed trailing whitespace.
|
131468 |
02-Jul-2004 |
ru |
Fixed spelling of the document date.
|
130982 |
23-Jun-2004 |
brooks |
el(4) stopped needing to me a count device in December 2000.
|
130860 |
21-Jun-2004 |
rik |
MFCronyx: add cross-references, fix history section.
|
130857 |
21-Jun-2004 |
mpp |
Spelling fixes.
|
130850 |
21-Jun-2004 |
rik |
MFcx(4) 1.23: markup fixes by ru@.
|
130606 |
16-Jun-2004 |
fjoe |
Change remaining references to "arlconfig" to "arlcontrol".
MFC after: 0 days
|
130582 |
16-Jun-2004 |
ru |
Assorted markup, spelling, and grammar fixes.
|
129613 |
23-May-2004 |
bde |
Remove man4/man4.i386/cy.4 and adjust makefiles after repo-copying cy.4 up to man4.
|
129339 |
17-May-2004 |
rik |
Connect Cronyx Tau-PCI to the system.
|
129135 |
11-May-2004 |
des |
mdoc police.
Submitted by: ru
|
129125 |
11-May-2004 |
des |
Man page for the ichwd driver.
|
129037 |
07-May-2004 |
rik |
Add manual page for Cronyx Tau-PCI adapters. It is PCI family, but we never test it on other than i386 arch.
|
128571 |
23-Apr-2004 |
philip |
Hook up acpi_asus and its manual page in two more places I managed to overlook last night. Sorry about that :-o
Spotted by: njl (mentor, spotter of forgetfulness)
|
128561 |
22-Apr-2004 |
philip |
Add the ACPI Asus extras driver. Provides support for cool ACPI-controled gadgets (hotkeys, lcd, ...) on Asus laptops. I aim to closely track the acpi4asus project which implements these features in the Linux kernel.
If this breaks your laptop, please let me know how it does it :-)
Approved by: njl (mentor)
|
128207 |
14-Apr-2004 |
njl |
Add support for video output switching. It appears no systems use HCI to change the video output but use a separate device with a DSSX method and a HID of "TOS6201" instead. We use a pseudo-driver to get the handle for this object and pass it to the acpi_toshiba driver.
This is untested but seems to match the Linux Toshiba driver.
|
128196 |
13-Apr-2004 |
fjoe |
Use ifconfig(8) for setting common 802.11 parameters.
Submitted by: Stanislav A. Svirid <count@riss-telecom.ru>
|
128174 |
13-Apr-2004 |
imp |
The 3CXE589DT was spotted in the wild, and is presumed supported by this driver.
Also, add 3Com to a number of places.
|
127942 |
06-Apr-2004 |
rik |
Remove hyphen between product and company name. This may confuse peoples.
Requested by: Mark Johnston <mjohnston at skyweb dot ca> MFC after: 1 days
|
127436 |
26-Mar-2004 |
non |
Add ct(4) man page for ct SCSI host adapter device driver and attach it to the build.
|
127406 |
25-Mar-2004 |
rik |
Move ct.4 to ctau.4. Step four: backout ct.4 via rm.
Approved by: imp (mentor)
|
127405 |
25-Mar-2004 |
rik |
Move ct.4 to ctau.4. Step three: change ct to ctau in Makefile.
Approved by: imp (mentor)
|
127382 |
24-Mar-2004 |
rik |
Move ct.4 to ctau.4. Step two: add ct.4 as ctau.4. Do not bother about too small history for ct.4.
Approved by: imp(mentor)
|
127381 |
24-Mar-2004 |
rik |
Move ct.4 to ctau.4. Step one: remove ctau.4 link.
Approved by: imp(mentor)
|
127231 |
20-Mar-2004 |
marks |
"CPU is an acronym, and as such should be spelled in all uppercase."
Pointed out by: ru
|
127229 |
20-Mar-2004 |
marks |
Sync manpage with code for hw.acpi.toshiba.cpu_speed sysctl.
Submitted by: Chia-liang Kao <clkao@clkao.org> Approved by: njl (mentor)
|
127124 |
17-Mar-2004 |
brueffer |
Language cleanup
|
127093 |
16-Mar-2004 |
fjoe |
Fix copyrights and mandoc markup.
Pointed out by: ru
|
127040 |
15-Mar-2004 |
fjoe |
Add arl(4): driver for Aironet Arlan 655 wireless adapters.
MFC after: 2 weeks
|
126991 |
14-Mar-2004 |
imp |
Retire gsc man page after driver retirement
|
126987 |
14-Mar-2004 |
imp |
rdp has been retired, retire its man page too
|
126983 |
14-Mar-2004 |
imp |
le driver is gone, retire its man page
|
126981 |
14-Mar-2004 |
imp |
Really remove asc man page this time
|
126948 |
14-Mar-2004 |
imp |
Now that the asc driver is no longer in the tree, the man page is surplus.
|
126944 |
14-Mar-2004 |
imp |
Now that the wt driver is gone, go ahead and remove its userland support.
If the wt driver is rewritten using newer APIs, then these can return with it.
|
126897 |
13-Mar-2004 |
brueffer |
Capitalize I/O
|
126551 |
03-Mar-2004 |
rik |
1. Add ct.4 manual page entry. 2. Add ctau.4 link to ct.4.
Approved by: imp (mentor)
|
126550 |
03-Mar-2004 |
rik |
Add manual page for Cronyx/Tau-ISA device driver.
Approved by: imp (mentor)
|
126509 |
02-Mar-2004 |
brueffer |
Remove reference to cx.4. A manpage doen't have to reference itself :-)
|
126499 |
02-Mar-2004 |
brueffer |
Language cleanup
|
126048 |
20-Feb-2004 |
ru |
mdoc(7) guru's glance.
|
126020 |
19-Feb-2004 |
philip |
Document the acpi_toshiba driver written by Hiroyuki Aizu.
Approved by: njl (mentor)
|
124747 |
20-Jan-2004 |
ru |
Use a single style for share/man/ makefiles:
- Sort MAN and MLINKS in "dictionary" order ignoring case.
- For multi-value MAN and multi-pair MLINKS, put each value/pair on its own line, for easier sorting and so that further diffs are easier to see.
|
124577 |
15-Jan-2004 |
brueffer |
tx.4 has been repocopied to src/share/man/man4
Repo-surgery by: joe
|
124304 |
09-Jan-2004 |
brueffer |
Add MLINK:
ndis.4 -> if_ndis.4
|
124233 |
07-Jan-2004 |
wpaul |
Add 'device wlan' to synopsis.
|
123943 |
28-Dec-2003 |
ru |
mdoc(7): fixed document title.
|
123474 |
11-Dec-2003 |
wpaul |
Commit the first cut of Project Evil, also known as the NDISulator.
Yes, it's what you think it is. Yes, you should run away now.
This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts:
sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines.
sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module.
usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.)
ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point.
This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this:
# cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis
All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them.
An example usage of the Broadcom wireless driver would be:
# sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up
Things to be done:
- get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
|
123213 |
07-Dec-2003 |
imp |
Remote meteor driver. It hasn't compiled in over 3 years. If someone makes it compile again, and can test it, we can restore the driver to the tree.
|
123208 |
07-Dec-2003 |
imp |
The dgb driver is redundant with the digi driver in the tree. It uses lots of old interfaces, and digi now supports all cards that dgb supported. The author of the driver says that this is no longer necessary.
Approved by: babkin@
|
123159 |
05-Dec-2003 |
imp |
Updated man page from cronyx.
Forgotten by: imp Reminded by: Roman Kurakin Approved by: re@ <scottl>
|
123059 |
30-Nov-2003 |
simon |
Mdoc(7) janitor cleanup.
Reviewed and improved by: ru OK'ed by: phk Approved by: re (rwatson)
|
123016 |
27-Nov-2003 |
phk |
Add manual page for CPU_ELAN, CPU_SOEKRIS and related options for the Elan 520 CPU chip.
Approved by: re@
|
122522 |
12-Nov-2003 |
hmp |
Mdoc Janitor:
* cleanup hard sentence breaks.
* sprinle some .Dq macros.
|
122371 |
09-Nov-2003 |
bmah |
Add some pc98-specific devices from the hardware notes.
|
122345 |
09-Nov-2003 |
imp |
Complete the variants of 1522/1520 cards
|
122344 |
09-Nov-2003 |
imp |
AHA-1505 also alegedly supported
|
122343 |
09-Nov-2003 |
imp |
Flesh out the list of supported devices for this driver. Add bugs that describe the current state of this driver.
# Note: Don't ask me about the driver: I can't get it to work well either :-)
|
122337 |
09-Nov-2003 |
bmah |
Mention Olicom OC2220, which is listed in the hardware notes and driver source.
|
122306 |
08-Nov-2003 |
rushani |
Add manpage link wd.4 -> wdc.4
|
121918 |
03-Nov-2003 |
imp |
Both CC and CX versions of the 556 exist
|
121917 |
02-Nov-2003 |
imp |
Separate out the old 3CXEM556 models (10Mbps only) from the faster 3CCFEM556 models (10/100Mbps). I have only the former, and none of the latter, so document that the latter might not work.
|
121906 |
02-Nov-2003 |
imp |
Only the 3C1 is now known not to work. All my other cards work with this driver. I've not tested the '556B or the '556BI cards, however, as I don't own them.
|
121875 |
02-Nov-2003 |
imp |
The '574 family works (I had a bad dongle which is why I thought it might not be). The modem combo cards do not (confirmed today)
|
121627 |
28-Oct-2003 |
tjr |
Catch up with removal of /usr/bin/svr4.
|
121396 |
23-Oct-2003 |
hmp |
Add a PAE(4) MLINK for simplicity.
|
121229 |
18-Oct-2003 |
simon |
Note that PAE has been MFC'd into RELENG_4 and will appear in FreeBSD 4.9.
|
120929 |
09-Oct-2003 |
imp |
Update the list of supposedly supported 3Com devices from trolling ebay. Also have notes for my recent experiences with 3com pcmcia cards (mostly this or that doesn't work). Also look at the strings that are claimed to be supported in the bus specific front ends. Note that the 3C569* are CBUS.
|
119964 |
10-Sep-2003 |
ru |
mdoc(7): Properly mark C headers.
|
119893 |
08-Sep-2003 |
ru |
mdoc(7): Use the new feature of the .In macro.
|
119559 |
29-Aug-2003 |
simon |
- Update the page title to include information about which cards are supported by the driver. - Use a list to specify which cards are supported. - Add the 3c592/3c597 EISA cards to the list of supported cards.
PR: docs/56086 (based on) Submitted by: Lukas Ertl <l.ertl@univie.ac.at>
|
119432 |
24-Aug-2003 |
bmah |
Add a few PC98-specific (?) devices, from the hardware notes.
|
119430 |
24-Aug-2003 |
bmah |
Sort device list, no other content changes.
|
119429 |
24-Aug-2003 |
bmah |
Add a few more PC98-specific instances of fe(4) devices, obtained from the hardware notes.
|
119206 |
21-Aug-2003 |
simon |
Catch up ep(4) with the hardware notes.
Submitted by: Lukas Ertl <l.ertl@univie.ac.at> PR: docs/55659 Confirmed by: driver source code and pccard.conf MFC after: 3 days
|
119205 |
21-Aug-2003 |
simon |
Catch up fe(4) with the hardware notes.
Submitted by: Lukas Ertl <l.ertl@univie.ac.at> PR: docs/55636 Confirmed by: driver source code and pccard.conf MFC after: 3 days
|
117871 |
22-Jul-2003 |
peter |
Update npx status.
Reminded by: tjr
|
117011 |
28-Jun-2003 |
ru |
Hiten's patchset for section four manpages, slightly edited by me.
|
115766 |
03-Jun-2003 |
harti |
The midway driver has been busdmaified and is not i386-specific anymore. Repo-copy it from the i386 specific man4 section to the common one. Remove the i386 keyword from the man page header. Document the sysctl interface to the driver. Fix a spelling error (ALL -> AAL).
|
115392 |
29-May-2003 |
ru |
Assorted mdoc(7) fixes.
Approved by: re (blanket)
|
115143 |
18-May-2003 |
ru |
Fixed troff(1) and mdoc(7) warnings.
Approved by: re (blanket)
|
114960 |
12-May-2003 |
hmp |
Fix .Xr typo.
Approved by: des (mentor), re (scottl)
|
114109 |
27-Apr-2003 |
imp |
Update to reflect removal of tw.
Approved by: re@ (scottl)
|
114020 |
25-Apr-2003 |
jake |
Remove a stray sentence.
|
113769 |
20-Apr-2003 |
obrien |
The i386-specific asr manpage has been repo copied to the MI section.
|
113427 |
13-Apr-2003 |
fjoe |
manual page for Granch SBNI12-xx network interface driver
|
113302 |
09-Apr-2003 |
jake |
Fix non-word.
Noticed by: njl
|
113280 |
09-Apr-2003 |
jake |
Add a man page for options PAE.
Sponsored by: DARPA, Network Associates Laboratories
|
113134 |
05-Apr-2003 |
trhodes |
Add a manual page for the smapi module.
Reviewed by: ru, mdodd
|
113065 |
04-Apr-2003 |
mdodd |
Add a manpage for the 'vpd' driver.
|
112624 |
25-Mar-2003 |
trhodes |
Remove MAKEDEV rot.
PR: 50286, 50285 Submitted by: Sergey A. Osokin <soa@FreeBSD.org.ru>
|
111057 |
17-Feb-2003 |
trhodes |
Xref miibus(4).
|
110059 |
29-Jan-2003 |
mux |
On -CURRENT, we need "device apm" and not "device apm0 at nexus?".
|
109610 |
21-Jan-2003 |
obrien |
Augment the model number list.
|
108221 |
23-Dec-2002 |
ru |
Fixed the abuses of .Ql visible on stderr in troff mode.
PR: docs/37176
|
107788 |
12-Dec-2002 |
ru |
Uniformly refer to a file system as "file system".
Approved by: re
|
104444 |
04-Oct-2002 |
scottl |
Alas, poor matcd, I knew ye well.
It doesn't work. It cannot be made to work. Goodbye.
X-MFC after: ASAP
|
103356 |
15-Sep-2002 |
ceri |
s/protocole/protocol/
PR: docs/42815 Submitted by: Nicola Vitale <nivit@libero.it> MFC after: 21 days
|
101908 |
15-Aug-2002 |
ru |
mdoc(7) police: fixed indentation in synopsis.
Submitted by: bde
|
99810 |
11-Jul-2002 |
bde |
Improved wording in the descriptions of hints. In particular, don't start a new paragraph for describing the hints associated with each card type.
Reviewed by: ru
|
97589 |
30-May-2002 |
ru |
mdoc(7) police: markup nits.
|
97483 |
29-May-2002 |
ru |
mdoc(7) police: tidy up the markup.
|
96711 |
16-May-2002 |
trhodes |
More file system > filesystem
|
95460 |
25-Apr-2002 |
semenu |
Implement true multicast filtering.
Inspired by: dc(4)
MFC after: 1 week
|
95118 |
20-Apr-2002 |
nsouch |
Fix controller in SW mode and See also + first appeared in 4.5.
|
93020 |
23-Mar-2002 |
nsouch |
viapm is the driver for VIA SMBus controllers
|
92580 |
18-Mar-2002 |
ru |
mdoc(7) police: tidy up.
|
92578 |
18-Mar-2002 |
ru |
Remove the confusing XXX that should have been deleted in revision 1.5.
|
92426 |
16-Mar-2002 |
schweikh |
Correctly capitalize MHz and GHz.
MFC after: 3 days
|
92137 |
12-Mar-2002 |
murray |
This driver first appeared in FreeBSD 4.5, not 5.0.
|
90325 |
06-Feb-2002 |
markm |
CURRENT-tyyle updates. This document was (is?) in the dark ages.
|
89612 |
21-Jan-2002 |
mpp |
Ispell sweep of share/man/man4/man4.i386.
|
87647 |
11-Dec-2001 |
ru |
s/sysctl -w/sysctl/
|
86779 |
22-Nov-2001 |
ru |
Install pnpbios(4) manpage.
Submitted by: Alexander Leidinger <Alexander@leidinger.net>
|
86741 |
21-Nov-2001 |
ru |
mdoc(7) police: cleanup the markup a bit.
|
86024 |
04-Nov-2001 |
asmodai |
Disconnect sb.4. This is a manual page left over from the old pcm/voxware driver era. Superceded by newpcm's sbc.4.
|
86022 |
04-Nov-2001 |
asmodai |
We ditched controller a long while ago in favour of device.
|
85405 |
24-Oct-2001 |
ru |
Finish the removal of the LABPC driver.
Forgotten by: phk
|
84877 |
13-Oct-2001 |
yokota |
Update man pages in the section 4 to match the reality in -CURRENT.
- Change lines referring to kernel configuration file: device foo0 at isa port xxx irq yyy... to device foo Describe resource "hints" in /boot/device.hints.
- Try to describe resource allocation and probe/attach behavior in the newbus framework.
|
84654 |
08-Oct-2001 |
murray |
Remove references to non-existant pvcsif(8) and pvctxctl(8).
PR: docs/30446 Submitted by: Giorgos Keramidas <charon@labs.gr>
|
84653 |
08-Oct-2001 |
murray |
Remove reference to non-existant crd(4) man page.
PR: docs/30445 Submitted by: Giorgos Keramidas <charon@labs.gr>
|
84533 |
05-Oct-2001 |
yar |
Move the agp(4) page from the i386 directory to the machine-independent directory since AGP is used on other architectures as well.
|
84524 |
05-Oct-2001 |
yar |
Use the traditional "indent" offset for mdoc(7) lists.
|
84517 |
05-Oct-2001 |
yar |
Add the manpage for the AGP interface.
|
84306 |
01-Oct-2001 |
ru |
mdoc(7) police: Use the new .In macro for #include statements.
|
83854 |
23-Sep-2001 |
yokota |
- Update pnp(4) to match the reality in -CURRENT. - Add pnpbios(4).
|
83853 |
23-Sep-2001 |
yokota |
Fix a comment line which wrongly states this man page is for the `asc' scanner device :-)
MFC after: 3 days
|
83600 |
18-Sep-2001 |
murray |
Add 'device smb' to the synopsis, as this is required to do anything useful with these devices.
|
83555 |
16-Sep-2001 |
murray |
Add amdpm.4 to build.
|
83553 |
16-Sep-2001 |
murray |
SMBus support for the AMD 756 power management unit. See smbus(4), amdpm(4) and smb(4).
This device can be used with userland programs such as sysutils/lmmon to retrieve sensor information from the motherboard.
PR: kern/23989 Obtained from: Matthew C. Forman <mcf@dmu.ac.uk> Based on: alpm(4)
|
83122 |
05-Sep-2001 |
brooks |
Update tx(4) to always enable vlan(4) support.
Approved by: semenu
|
82864 |
03-Sep-2001 |
murray |
Two characters in the devices name in the SYNOPSIS were transposed.
matcdl0c -> matcd0lc
PR: docs/25000 Submitted by: Rich Morin <rdm@cfcl.com>
|
82138 |
22-Aug-2001 |
ru |
mdoc(7) police:
- removed whitespace at EOL - removed hard sentence break - minor grammar and spelling fixes - s/pseudo-device/device/
|
82082 |
21-Aug-2001 |
semenu |
Document recent changes about VLAN support and oversized packets.
PR: kern/29235 MFC after: 1 day
|
81789 |
16-Aug-2001 |
ru |
MFS: first appeared in FreeBSD 4.4.
|
81632 |
14-Aug-2001 |
ru |
mdoc(7) police: fix SEE ALSO.
|
81622 |
14-Aug-2001 |
ru |
mdoc(7) police: s/BSD/.Bx/ where appropriate.
|
81591 |
13-Aug-2001 |
ru |
mdoc(7) police: s;BSD/OS;.Bsx; where appropriate.
|
81590 |
13-Aug-2001 |
ru |
mdoc(7) police: s/NetBSD/.Nx/ where appropriate.
|
81588 |
13-Aug-2001 |
ru |
Spell "FreeBSD" with "F" and "BSD" in uppercase.
|
81564 |
12-Aug-2001 |
iedowse |
Update io(4) to match reality following revision 1.42 of sys/i386/i386/mem.c: only the super-user may open /dev/io regardless of the device permissions (just 4 years late!).
Also, add cross-reference to i386_{get,set}_ioperm(2).
PR: kern/13359
|
81458 |
10-Aug-2001 |
ru |
mdoc(7) police: fixed the "new sentence" bogons.
|
81298 |
08-Aug-2001 |
sheldonh |
can not -> cannot
|
81251 |
07-Aug-2001 |
ru |
mdoc(7) police:
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text. Not only this slows down the mdoc(7) processing significantly, but it also has an undesired (in this case) effect of disabling hyphenation within the entire enclosed block.
|
79727 |
14-Jul-2001 |
schweikh |
Removed whitespace at end-of-line; no content changes. I simply did cd src/share; find man[1-9] -type f|xargs perl -pi -e 's/[ \t]+$//'
BTW, what editors are the culprits? I'm using vim and it shows me whitespace at EOL in troff files with a thick blue block...
Reviewed by: Silence from cvs diff -b MFC after: 7 days
|
79657 |
13-Jul-2001 |
ru |
mdoc(7) police: columnate sysctl(8) MIBs list (using the new feature of -column lists width specifiers) plus minor markup fixes.
|
79538 |
10-Jul-2001 |
ru |
mdoc(7) police: removed HISTORY info from the .Os call.
|
79454 |
09-Jul-2001 |
dd |
mdoc(7) police: remove extraneous .Pp before and/or after .Sh.
|
79366 |
06-Jul-2001 |
ru |
mdoc(7) police: sort SEE ALSO xrefs (sort -b -f +2 -3 +1 -2).
|
79137 |
03-Jul-2001 |
iwasaki |
Add Transmeta Crusoe LongRun support.
Submitted by: Tamotsu HATTORI <athlete@kta.att.ne.jp> Reviewed by: arch@ folks MFC after: 1 week
|
76625 |
15-May-2001 |
ru |
mdoc(7) police: FreeBSD -> .Fx.
|
76447 |
10-May-2001 |
scottl |
Add information about the 2400A controllers. Fix erroneous reference to BSD/OS.
|
76175 |
01-May-2001 |
schweikh |
pseudo-device -> device in kernel config lines. Removed whitespace at EOL. Reviewed by: joerg, dd
|
75670 |
18-Apr-2001 |
ru |
mdoc(7) police: normalize .Nd.
|
75663 |
18-Apr-2001 |
ru |
mdoc(7) police: use .Fx.
|
74856 |
27-Mar-2001 |
ru |
MAN[1-9] -> MAN.
|
74777 |
25-Mar-2001 |
dirk |
Fix .Xr sd -> da.
|
73952 |
07-Mar-2001 |
ru |
Replace custom type of comments here too.
|
73337 |
02-Mar-2001 |
ru |
mdoc(7) police: in -offset clause, spell the ``indent'' correctly.
|
72701 |
19-Feb-2001 |
ru |
Remove (now unnecessary) MLINKS.
|
72155 |
08-Feb-2001 |
ru |
mdoc(7) police: removed hard sentence break, corrected .Nd.
|
72133 |
07-Feb-2001 |
semenu |
Update tx(4) man page to reflect changes since 1997, especially recent changes.
|
71895 |
01-Feb-2001 |
ru |
mdoc(7) police: split punctuation characters + misc fixes.
|
71377 |
22-Jan-2001 |
ru |
mdoc(7) police: use macros wherever possible, remove hard sentence breaks.
|
71263 |
19-Jan-2001 |
ru |
mdoc(7) police: removed leading whitespaces that are not inside Bd/Ed; these hardly degrade the quality of the produced output.
|
71004 |
13-Jan-2001 |
dmlb |
Correct a typo in a product name.
Pointed Out By: ru
|
70941 |
11-Jan-2001 |
dmlb |
Add manual for ray driver.
Reviewed by: ru
|
70466 |
29-Dec-2000 |
ru |
Prepare for mdoc(7)NG.
|
70432 |
28-Dec-2000 |
ru |
Mdoc(7)ify.
|
70022 |
14-Dec-2000 |
ru |
mdoc(7) police: added missing .Os call.
|
70015 |
14-Dec-2000 |
ru |
mdoc(7) police: removed history info from the .Os FreeBSD call.
|
69860 |
11-Dec-2000 |
ru |
mdoc(7) police: use canonical form of .Dd macro.
|
69346 |
29-Nov-2000 |
sheldonh |
Looks like my last round of suggestions didn't make it in. Fix invalid cross-references.
|
69344 |
29-Nov-2000 |
newton |
Add streams(4) and svr4(4) to man4.i386 Makefile (yes, I know this should have happened with the last commit).
|
69343 |
29-Nov-2000 |
newton |
Introduce svr4(4) and streams(4).
Reviewed by: sheldonh
|
69058 |
22-Nov-2000 |
phantom |
remove bogus Xref to lsdev(8)
PR: docs/13218
|
69052 |
22-Nov-2000 |
ru |
mdoc(7) police: Er macro usage cleanup.
|
69027 |
22-Nov-2000 |
ru |
mdoc(7) police: do not split author names in the AUTHORS section.
|
68962 |
20-Nov-2000 |
ru |
mdoc(7) police: use the new features of the Nm macro.
|
68939 |
20-Nov-2000 |
sheldonh |
Fix broken cross-reference to linprocfs(5).
|
68857 |
17-Nov-2000 |
ru |
mdoc(7) police: eliminate warnings.
|
68854 |
17-Nov-2000 |
ru |
mdoc(7) police: use certified section headers wherever possible.
|
68753 |
15-Nov-2000 |
ben |
remove fullstops from the end of .Xr lines in SEE ALSO sections.
|
68719 |
14-Nov-2000 |
ru |
Spell the author's name correctly.
|
68716 |
14-Nov-2000 |
ru |
Use Fx macro wherever possible.
|
68575 |
10-Nov-2000 |
ru |
Avoid use of direct troff requests in mdoc(7) manual pages.
|
68392 |
06-Nov-2000 |
ru |
-mdoc cleanup: replace custom .ES/.EE macros with literal display.
|
68391 |
06-Nov-2000 |
ru |
Fixed typo: .PB -> .El
|
67822 |
28-Oct-2000 |
nik |
RBG -> RGB
PR: docs/21724 Submitted by: TOGAWA Satoshi <toga@puyo.org>
|
67772 |
28-Oct-2000 |
asmodai |
Add some more information to the AUTHORS section.
Remove unnecessary duplication of asr after the .Nm macro.
|
67713 |
27-Oct-2000 |
asmodai |
Please welcome the asr manpage [no, not alt.sysadmin.recovery], but the Adaptec SCSI RAID cards.
Submitted by: msmith, scottl, Mark Salyzyn
|
67246 |
17-Oct-2000 |
roger |
Fix error in sample code in the man page
|
66860 |
09-Oct-2000 |
phk |
Initiate deorbit burn sequence for <machine/mouse.h>.
Replace all in-tree uses with <sys/mouse.h> which repo-copied a few moments ago from src/sys/i386/include/mouse.h by peter. This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/mouse.h> to discourage use. November 15th 2000 the warnings will be converted to errors. January 15th 2001 the <machine/mouse.h> files will be removed.
|
65693 |
10-Sep-2000 |
dwmalone |
pmcd_value is actually a quad_t.
|
65068 |
25-Aug-2000 |
sheldonh |
Replace the thumb-suck phrase "system call vector translation" with something that people who like tomato juice prefer.
|
65041 |
24-Aug-2000 |
sheldonh |
Import the new linux(4) manual page, which will be useful when the linux(8) utility and manual page go away.
|
64615 |
13-Aug-2000 |
ume |
Add output of per battery information to apm(1). New ioctl APMIO_GETPWSTATUS is introduced.
Reviewed by: -mobile and -current folks (no objection)
|
63021 |
12-Jul-2000 |
nbm |
Update the st(4) and sd(4) references to sa(4) and da(4) respectively, maintaining order, were the references ordered already.
PR: reminded by 19647 Submitted by: reminded by Jens Schweikhardt <schweik@noc.dfn.de>
|
61135 |
31-May-2000 |
chris |
Replace `manual(section)' references with proper .Xr statements.
|
60990 |
28-May-2000 |
obrien |
Move adv.4, adw.4, aha.4, ahb.4, bktr.4, bt.4, dpt.4, ed.4, joy.4, ppc.4, sym.4, and wi.4 to the MI area.
|
60469 |
12-May-2000 |
phantom |
Fix typo
Spoted by: bde
|
60442 |
12-May-2000 |
phantom |
. replace CONFIGURATION section name with SYNOPSYS as mdoc(7) style declare. . remove redundant paragraph breaks. . fix typo (.Sj -> .Sh)
|
60441 |
12-May-2000 |
phantom |
Properly mdoc'ify this manual page: remove all direct troff formating directives, apply correct mdoc(7) Blocks and Lists formatting.
|
60440 |
12-May-2000 |
phantom |
Add MLINKS: bktr.4 -> booktree.4
|
60439 |
12-May-2000 |
phantom |
Remove osolete reference to eg(4), properly use mdoc macro `.Nm'
|
59974 |
04-May-2000 |
archie |
Move netgraph node type man pages from section 8 to section 4.
|
58176 |
17-Mar-2000 |
peter |
wfd is gone (pre-ata ide floppy (ls-120, zip) driver)
|
58103 |
15-Mar-2000 |
sheldonh |
Discourage the pathalogical practice of configuring the 3c509 in EISA mode on non-EISA systems.
PR: 2598
|
57731 |
03-Mar-2000 |
sheldonh |
Remove single-space hard sentence breaks. These degrade the quality of the typeset output, tend to make diffs harder to read and provide bad examples for new-comers to mdoc.
|
57709 |
03-Mar-2000 |
jkoshy |
Correct typo ("wd" -> "wi").
|
57695 |
02-Mar-2000 |
sheldonh |
Remove more single-space hard sentence breaks.
|
57692 |
02-Mar-2000 |
sheldonh |
Replace the use of troff macros with a real diagnostic list.
|
57661 |
01-Mar-2000 |
nik |
Remove xrefs to obosolete cdplay(1)
PR: docs/17079 Submitted by: Udo Erdelhoff <ue@nathan.ruhr.de>
|
57404 |
24-Feb-2000 |
archie |
Fix incorrect man page information about the name of the netgraph node when compiled with options NETGRAPH.
|
57379 |
21-Feb-2000 |
billf |
Spell out '3' as 'three'
|
57255 |
16-Feb-2000 |
asmodai |
Fix typo's.
Submitted by: George Cox <gjvc@extremis.demon.co.uk>
|
57207 |
14-Feb-2000 |
gibbs |
Add references to new device support.
|
56999 |
05-Feb-2000 |
asmodai |
Update a bit. Inspired by the mentioned PR.
PR: 11258 Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp> and John Reynolds <jjreynold@home.com>
|
56729 |
28-Jan-2000 |
asmodai |
Fix misunderstanding that ata(4) is i386 only. Since this file has no history, it does not warrant repo action.
|
56696 |
27-Jan-2000 |
asmodai |
Welcome the ata(4) manpage. This will be highly used for 4.x. (I hope)
Submitted by: sos Reviewed by: sos, Dan Langille <reviews@freebsddiary.org>
|
56612 |
25-Jan-2000 |
archie |
Add a reference to ng_ether(8).
|
56518 |
24-Jan-2000 |
peter |
Remove stray "cam" in the example device lines.
|
56475 |
23-Jan-2000 |
asmodai |
Get rid of lame \& usage.
|
56468 |
23-Jan-2000 |
asmodai |
Third round of config related changes to the manpages.
device blah0 -> device blah for PCI devices and busses.
|
56452 |
23-Jan-2000 |
asmodai |
Don't build ze and zp manpages.
|
56451 |
23-Jan-2000 |
asmodai |
Remove .Xr's to apmconf(8) since this got removed and merged into apm(8).
|
56448 |
23-Jan-2000 |
asmodai |
Remove these manpages. They already got axed in other parts of the documentation.
Nudged by: phk
|
56445 |
23-Jan-2000 |
groudier |
`sym' driver man page addition. Reviewed by: David O'Brien
|
56389 |
22-Jan-2000 |
nsouch |
Various manpage cleanups after newbus port of ppbus.
Remove alpm.4 from machine independant manpages set.
|
56352 |
21-Jan-2000 |
archie |
Document these drivers' support for netgraph(4).
|
56191 |
17-Jan-2000 |
asmodai |
Fix usage of quotes in kerneloptions.
|
56186 |
17-Jan-2000 |
iwasaki |
Make apm.4 consistent with LINT ("isa?"->"nexus?").
Submitted by: Alexander Leidinger <Alexander@Leidinger.net>
|
56185 |
17-Jan-2000 |
asmodai |
Usage of ``tty'' is deprecated in device configuration.
|
56180 |
17-Jan-2000 |
nbm |
Nuke the 'bio', as per orders from peter
|
56166 |
17-Jan-2000 |
asmodai |
Bring the wd.4 manpage into the world of 4.0:
Spell diskcontroller as disk controller.
There is no more CMD640 option.
bad144 got axed. Reflect change.
Contract the /dev entries to one /dev/wd* entry which we call wd device nodes to reflect the merger of character and block devices.
Add small line to NOTES stating that wd will some be replaced completely by ata/ad.
Suggested by: bde
|
56159 |
17-Jan-2000 |
asmodai |
Fix .Cd macro usage.
Pointed out by: bde
|
56158 |
17-Jan-2000 |
asmodai |
Fix usage of ``disk'' to ``device''.
|
56156 |
17-Jan-2000 |
asmodai |
Discourage usage of controller in kernel config files. Reflect this by changing ``controller'' to ``device'' as per GENERIC and LINT.
|
54672 |
16-Dec-1999 |
cracauer |
Mixed updates: - isa => nexus - flags - GPL_MATH_EMULATE - document breakage of non-GPL emulator since we use new compiler. - break lines in paragraohs I touched so that sentenses start on new lines.
|
54269 |
07-Dec-1999 |
wpaul |
Correct the synopsis for the wi(4) driver: it's just "device wi0" now, not "device wi0 at isa? port? irq?".
|
54243 |
07-Dec-1999 |
chris |
The typo was actually that ``if'' was misspelled as ``it.''
|
54242 |
07-Dec-1999 |
chris |
Fix a typo (specifically, the word ``it'' was used twice in a row where it did not need to be).
PR: 15207 Submitted by: Kazuo Seki <seki@is.utsunomiya-u.ac.jp>
|
53199 |
15-Nov-1999 |
phantom |
Deactivate manpages repo-copied to man4 directory (all these drivers not i386 specific anymore -- move them to appropriate place)
|
53054 |
09-Nov-1999 |
yokota |
Fix typo: MOUSE_GETSTAT -> MOUSE_GETSTATUS.
Found by: abial
|
53018 |
08-Nov-1999 |
yokota |
- Document SC_TWOBUTTON_MOUSE, SC_NORM_ATTR, SC_NORM_REV_ATTR, SC_KERNEL_CONS_ATTR and SC_KERNEL_CONS_REV_ATTR.
Nudged by eivind
|
52849 |
03-Nov-1999 |
chris |
Fix a typo.
PR: docs/14684
|
52806 |
02-Nov-1999 |
nik |
Fix a disappearing section due to use of (') in the text. Use the .Sq macro instead.
PR: docs/13153 Submitted by: Kazuo Horikawa <horikawa@jp.FreeBSD.org>
|
52692 |
30-Oct-1999 |
mpp |
mdoc style fix.
|
52674 |
30-Oct-1999 |
phantom |
Remove comments left since mdoc.template time or just useless comments
|
52551 |
27-Oct-1999 |
mdodd |
Modify the man page for the 'ep' driver to be somewhat consistent with the recent changes.
|
52329 |
17-Oct-1999 |
jhay |
Note that we support the PCI version of the Digi SYNC/570i cards.
|
52282 |
16-Oct-1999 |
wpaul |
Convert the mx driver to miibus.
In order to make this work, I created a pseudo-PHY driver to deal with Macronix chips that use the built-in NWAY support and symbol mode port. This is actually all of them, with the exception of the original MX98713 which presents its NWAY support via the MII serial interface.
The mxphy driver actually manipulates the controller registers directly rather than using the miibus_readreg()/miibus_writereg() bus interface since there are no MII registers to read. The mx driver itself pretends that the NWAY interface is a PHY locayed at MII address 31 for the sole purpose of allowing the mxphy_probe() routine to know when it needs to attach to a host controller.
|
51953 |
05-Oct-1999 |
n_hibma |
Add comment about the debugging flag
|
51866 |
02-Oct-1999 |
dcs |
Update man page to loader.conf(5) days.
|
51813 |
30-Sep-1999 |
jkoshy |
Correct typos and -mdoc usage. Improve clarity of language.
PR: docs/140007 (partial) Submitted by: Adam Wight <adamw@holonet.net>
|
51682 |
26-Sep-1999 |
wpaul |
Update the Starfire driver comments and man page to include the URL of the AIC-6915 Programmer's Manual which I finally found online at Adaptec's site.
|
51573 |
22-Sep-1999 |
phantom |
.PB -> .El
PR: docs/13283 Submitted by: Norihiro Kumagai <kuma@jp.FreeBSD.org>
|
51567 |
22-Sep-1999 |
phantom |
Fix style typo.
PR: docs/13134 Submitted by: Norihiro Kumagai <kuma@jp.FreeBSD.org>
|
51557 |
22-Sep-1999 |
wpaul |
Mention in the documentation that the AOpen/Acer ALN-320 is a supported ethernet card (PCI, VIA Rhine II chipset).
|
51554 |
22-Sep-1999 |
roger |
Update man page to include the sysclts and kernel options commonly used
|
51531 |
22-Sep-1999 |
chris |
Cross-reference to nca(4) removed: No CAM driver for this device has yet to be written.
|
51530 |
22-Sep-1999 |
wpaul |
Spruce up the ADMtek driver: conver to newbus, miibus and add support for the AN985 "Centaur" chip, which is apparently the next genetation of the "Comet." The AN985 is also a tulip clone and is similar to the AL981 except that it uses a 99C66 EEPROM and a serial MII interface (instead of direct access to the PHY registers).
Also updated various documentation to mention the AN985 and created a loadable module.
I don't think there are any cards that use this chip on the market yet: the datasheet I got from ADMtek has boxes with big X's in them where the diagrams should be, and the sample boards I got have chips without any artwork on them.
|
51529 |
22-Sep-1999 |
chris |
Remove reference to eg(4) device: it does not exist anymore.
|
51422 |
19-Sep-1999 |
phantom |
Add link syscons.4 -> sc.4
PR: docs/13289
|
50986 |
06-Sep-1999 |
wpaul |
This commit adds driver support for PCI fast ethernet NICs based on the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation XPressNet. Datasheet is available from www.davicom8.com.
The DM910x chips are still more tulip clones. The API is reproduced pretty faithfully, unfortunately the performance is pretty bad. The transmitter seems to have a lot of problems DMAing multi-fragment packets. The only way to make it work reliably is to coalesce transmitted packets into a single contiguous buffer. The Linux driver (written by Davicom) actually does something similar to this. I can't recomment this NIC as anything more than a "connectivity solution."
This driver uses newbus and miibus and is supported on both i386 and alpha platforms.
|
50974 |
05-Sep-1999 |
wpaul |
This commit adds driver support for the Silicon Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the SiS chips can be found at www.sis.com.tw.
This is a fairly simple chipset. The receiver uses a 128-bit multicast hash table and single perfect entry for the station address. Transmit and receive DMA and FIFO thresholds are easily tuneable. Documentation is pretty decent and performance is not bad, even on my crufty 486. This driver uses newbus and miibus and is supported on both the i386 and alpha architectures.
|
50898 |
04-Sep-1999 |
phantom |
Mark some "i386 only" stuff as "i386 only"
PR: docs/13227 Submitted by: Alexey Zelkin <phantom@cris.net> Reviewed by: mpp
|
50846 |
03-Sep-1999 |
sheldonh |
Update the instructions for setting up audio symlinks, now that MAKEDEV DTRT (well, it's been doing it since rev 1.97).
|
50845 |
03-Sep-1999 |
chris |
Change `NetBSD' in the description to `FreeBSD' in the sentence,
"NetBSD provides machine-independent bus support and drivers for USB devices."
|
50844 |
03-Sep-1999 |
phantom |
Link man4/i386/alpm.4 to man4/ That will make this page visible for whatis/catman
PR: docs/13226 Submitted by: Alexey Zelkin <phantom@cris.net> Reviewed by: mpp
|
50534 |
28-Aug-1999 |
mpp |
Add $FreeBSD$ lines to man pages that are missing them to make it easier for translation teams.
PR: docs/13418 Submitted by: Alexey Zelkin <phantom@cris.net>
|
50476 |
28-Aug-1999 |
peter |
$Id$ -> $FreeBSD$
|
50401 |
26-Aug-1999 |
joerg |
. mention the existence of various flags in the synopsis, so it's more obvious to the casual reader . add flag 0x80 description
|
50198 |
22-Aug-1999 |
chris |
Remove cross-reference to removed man page od.4
sd(4) reference was also removed in the sentence: "In general the interfaces are similar to those described by wd(4) sd(4) and od(4)."
|
50172 |
22-Aug-1999 |
hoek |
The vty monster has feasted and now provides 8 vtys by default.
PR: docs/13310 (Maxim Soboleva <sobomax@altavista.ne>)
|
50128 |
21-Aug-1999 |
wpaul |
This commit adds device driver support for the Sundance Technologies ST201 PCI fast ethernet controller. Currently, the only card I know that uses this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the only cards I have are samples sent to me by D-Link.)
This driver is the first to make use of the miibus code once I'm sure it all works together nicely, I'll start converting the other drivers.
The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design only with its own register layout. Support is provided for ifmedia, hardware multicast filtering, bridging and promiscuous mode.
|
50103 |
21-Aug-1999 |
chris |
Fix spelling error: compliment -> complement
|
50000 |
18-Aug-1999 |
chris |
Fix a bunch of broken cross-references
|
49966 |
17-Aug-1999 |
yokota |
Mention Interlink VersaPad support.
|
49831 |
15-Aug-1999 |
mpp |
Various man page cleanup:
- Sort xrefs - FreeBSD.ORG -> FreeBSD.org - Be consistent with section names as outlined in mdoc(7). - Other misc mdoc cleanup.
PR: doc/13144 Submitted by: Alexey M. Zelkin <phantom@cris.net>
|
49792 |
14-Aug-1999 |
chris |
Fix bad references, remove some invalid ones such as sa(9).
|
49589 |
10-Aug-1999 |
mdodd |
Add support for the Am79C978. (AMD PCHome/PCI Ethernet adapter)
See: http://www.amd.com/products/npd/overview/homenetworking/intro.html
PR: kern/12275 Submitted by: Robert Watson <robert@cyrus.watson.org>
|
49303 |
31-Jul-1999 |
mpp |
Remove troff formatting directive from the first line of the man page, since it is no longer needed.
Pointed out by bde before I had a chance to fix it
|
49282 |
30-Jul-1999 |
mpp |
Convert a table of function keys into mdoc format so that they format properly. Previously the table came out all garbled up.
|
49276 |
30-Jul-1999 |
mpp |
Fix some typos.
|
49131 |
27-Jul-1999 |
bde |
Fixed disordering in previous commit.
Fixed overflow at column 80 in rev.1.96.
|
49097 |
26-Jul-1999 |
kris |
Typo: assember -> assembler
|
49076 |
25-Jul-1999 |
wpaul |
This commit adds device driver support for Adaptec Duralink PCI fast ethernet controllers based on the AIC-6915 "Starfire" controller chip. There are single port, dual port and quad port cards, plus one 100baseFX card. All are 64-bit PCI devices, except one single port model.
The Starfire would be a very nice chip were it not for the fact that receive buffers have to be longword aligned. This requires buffer copying in order to achieve proper payload alignment on the alpha. Payload alignment is enforced on both the alpha and x86 platforms. The Starfire has several different DMA descriptor formats and transfer mechanisms. This driver uses frame descriptors for transmission which can address up to 14 packet fragments, and a single fragment descriptor for receive. It also uses the producer/consumer model and completion queues for both transmit and receive. The transmit ring has 128 descriptors and the receive ring has 256.
This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus so that it can be compiled as a loadable kernel module. Support for BPF and hardware multicast filtering is included.
|
48795 |
12-Jul-1999 |
nik |
Add $Id$, to make it simpler for members of the translation teams to track.
The $Id$ line is normally at the bottom of the main comment block in the man page, separated from the rest of the manpage by an empty comment, like so;
.\" $Id$ .\"
If the immediately preceding comment is a @(#) format ID marker than the the $Id$ will line up underneath it with no intervening blank lines. Otherwise, an additional blank line is inserted.
Approved by: bde
|
48693 |
09-Jul-1999 |
wpaul |
This commit adds driver support for the SysKonnect SK-984x series gigabit ethernet adapters. This includes two single port cards (single mode and multimode fiber) and two dual port cards (also single mode and multimode fiber). SysKonnect is currently the only vendor with a dual port gigabit ethernet NIC.
The ports on dual port adapters are treated as separate network interfaces. Thus, if you have an SK-9844 dual port SX card, you should have both sk0 and sk1 interfaces attached. Dual port cards are implemented using two XMAC II chips connected to a single SysKonnect GEnesis controller. Hence, dual port cards are really one PCI device, as opposed to two separate PCI devices connected through a PCI to PCI bridge. Note that SysKonnect's drivers use the two ports for failover purposes rather that as two separate interfaces, plus they don't support jumbo frames. This applies to their Linux driver too. :)
Support is provided for hardware multicast filtering, BPF and jumbo frames. The SysKonnect cards support TCP checksum offload however this feature is not currently enabled (hopefully it will be once we get checksum offload support).
There are still a few things that need to be implemeted, like the ability to communicate with the on-board LM80 voltage/temperature monitor, but I wanted to get the driver under CVS control and into -current so people could bang on it.
A big thanks for SysKonnect for making all their programming info for these cards (and for their FDDI and token ring cards) available without NDA (see www.syskonnect.com).
|
48634 |
06-Jul-1999 |
yokota |
List avaiable function keys.
|
48588 |
05-Jul-1999 |
yokota |
Reflect recent changes in syscons and vga.
|
48218 |
25-Jun-1999 |
mph |
Add Pro/100+ (i82559) to the list of supported products.
Approved by: dg
|
48007 |
18-Jun-1999 |
n_hibma |
Clarified info on X release 3.3.1.
Submitted/Reviewed by: Joe Touch <touch@ISI.EDU>
|
47903 |
14-Jun-1999 |
bde |
Updated the BUGS section. BREAK is now implemented.
Don't document non-bugs in the BUGS section, or anywhere else. It is not a bug to drop data when overloaded. The compile-time tuning options turned out to be not very useful, and aren't supported offically.
Documented the not so new option CY_PCI_FASTINTR.
|
47601 |
29-May-1999 |
nik |
Fix a couple of typos related to wfd.
PR: docs/10624 Submitted by: Joe Abley <jabley@buddha.clear.net.nz>
|
47589 |
28-May-1999 |
wpaul |
Fix support for the PNIC II. Earlier I had assumed that the PNIC II was similar to the PNIC I (supported by the pn driver). In fact, it's really a Macronix 98715A with wake on LAN support added. According to LinkSys, the PNIC II was jointly developed by Lite-On and Macronis. I get the feeling Macronix did most of the work. (The datasheet has the Macronix logo on it, and is in fact nearly identical to the 98715 datasheet, except for the extra wake on LAN registers.) In any case, the PNIC II works just fine with the Macronix driver.
The changes are:
- Move PCI ID for the PNIC II from the pn driver to the mx driver. - Mention PNIC II support in mx.4. - Mention PNIC II support in RELNOTES.TXT and HARDWARE.TXT.
|
47571 |
28-May-1999 |
yokota |
Add description on configuration options and the EXAMPLE section.
|
47533 |
27-May-1999 |
ghelmer |
There are six bit fields in the flags now, not four.
PR: i386/10328
|
47401 |
22-May-1999 |
wpaul |
- Fix up some comments in if_wi.c (no code changes) - Mention that the 6Mbps turbo adapters are supported in HARDWARE.TXT and RELNOTES.TXT and the wi.4 man page - Mention turbo adapters in the wicontrol.8 man page and provide a complete table of available transmit speed settings
|
47386 |
22-May-1999 |
bde |
Fixed disordering in previous commit.
|
47362 |
21-May-1999 |
wpaul |
Fix a couple of small grammatical errors.
|
47350 |
21-May-1999 |
wpaul |
This commit adds driver support for PCI fast ethernet cards based on the ADMtek AL981 "Comet" chipset. The AL981 is yet another DEC tulip clone, except with simpler receive filter options. The AL981 has a built-in transceiver, power management support, wake on LAN and flow control. This chip performs extremely well; it's on par with the ASIX chipset in terms of speed, which is pretty good (it can do 11.5MB/sec with TCP easily).
I would have committed this driver sooner, except I ran into one problem with the AL981 that required a workaround. When the chip is transmitting at full speed, it will sometimes wedge if you queue a series of packets that wrap from the end of the transmit descriptor list back to the beginning. I can't explain why this happens, and none of the other tulip clones behave this way. The workaround this is to just watch for the end of the transmit ring and make sure that al_start() breaks out of its packet queuing loop and waiting until the current batch of transmissions completes before wrapping back to the start of the ring. Fortunately, this does not significantly impact transmit performance.
This is one of those things that takes weeks of analysis just to come up with two or three lines of code changes.
|
47337 |
20-May-1999 |
yokota |
Remove bio/cam/net/tty labels.
OKed by: peter
|
47328 |
19-May-1999 |
obrien |
* Remove "'s in the synopsis as config(8) does not require them any more. * Optional bits now shown as such.
Submitted by: Philippe Charnier & bde
|
47319 |
19-May-1999 |
obrien |
Show the usage of flags in the synopsis. (I couldn't figure out how to suround `flags _flags_' by []'s :-( )
|
47257 |
16-May-1999 |
steve |
s/cF/nF/ in a couple of places.
PR: 10841 Submitted by: Kaneda Hiloshi <vanitas@ma3.seikyou.ne.jp>
|
47256 |
16-May-1999 |
mph |
This needs to be "at atkbdc?" rather than "at isa?". It's correct in GENERIC and LINT, which is why I only needed four reboots to figure out why my keyboard wasn't keyboarding.
|
47161 |
14-May-1999 |
jkoshy |
Refer to kget(8) instead of dset(8).
PR: docs/11702 Submitted by: Matthew D. Fuller <fullermd@over-yonder.net>
|
46858 |
10-May-1999 |
bde |
Fixed disordering in previous commit.
|
46825 |
09-May-1999 |
n_hibma |
Add the USB Mass Storage manual page
|
46740 |
08-May-1999 |
ken |
The 2930U2 and 3950U2 are supported by the Adaptec driver.
|
46582 |
06-May-1999 |
billf |
Fix confusing sentence, the PR noticed the sentence, I rewrote the sentence.
PR: docs/11257 Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
|
46508 |
05-May-1999 |
cwt |
Fix a typo (wi. -> wi.4)
Submitted by: Zach Heilig <zach@uffdaonline.net>
|
46495 |
05-May-1999 |
wpaul |
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters.
This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.)
Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
|
46465 |
05-May-1999 |
jkoshy |
Correct `sd', `st' -> `da', `sa'; add xref to scsi(4); remove xref to nca(4).
PR: docs/11493 Submitted by: "Steven G. Kargl" <kargl@troutmask.apl.washington.edu>
|
46451 |
04-May-1999 |
obrien |
Make `ed0' example match reality. Merge `ed1' and `ed2' examples as we don't ship with an `ed1' any more we yet, the example of extra flags could be useful to someone.
|
46450 |
04-May-1999 |
ghelmer |
Make "\n" appear in cample C code.
PR: docs/10708
|
46252 |
02-May-1999 |
kris |
Add $Id$
|
46068 |
25-Apr-1999 |
wosch |
Typo
PR: docs/11259 Submitted by: mzaki@e-mail.ne.jp
|
45892 |
21-Apr-1999 |
nsayer |
Spelling error fixed.
|
45686 |
14-Apr-1999 |
wpaul |
Grrr. Make all modes work properly with the 82c168 chip and built-in transceiver. Note in the manual page that autoselection doesn't work on the 82c168 because the built-in NWAY support is horribly broken. Manual mode selection works fine, but autoneg is broken for everything except maybe 10Mbps half-duplex. There's no simple way to fix this at the moment, so I have to settle for documenting the bug for now. Fortunately, there aren't anywhere near as many 82c168 boards around as there are 82c169s.
|
45628 |
12-Apr-1999 |
des |
Mention the new splash_pcx decoder.
|
45596 |
11-Apr-1999 |
n_hibma |
Fix typo's in previous commit.
|
45595 |
11-Apr-1999 |
n_hibma |
Added information on how to use a USB mouse under XFree.
Supplied by: Kazutaka YOKOTA
|
45590 |
11-Apr-1999 |
n_hibma |
Corrections supplied by Kazutaka YOKOTA.
|
45564 |
11-Apr-1999 |
n_hibma |
Add the manpages for ums and ukbd (USB mouse and keyboards)
|
45432 |
07-Apr-1999 |
wpaul |
Dangit, forgot to add ti.4 to Makefile.
Pointed out by: bde
|
45409 |
07-Apr-1999 |
msmith |
Document the new generic memory range management ioctls.
|
45386 |
06-Apr-1999 |
wpaul |
Add driver support for gigabit ethernet adapters based on the Alteon Networks Tigon 1 and Tigon 2 chipsets. There are a _lot_ of OEM'ed gigabit ethernet adapters out there which use the Alteon chipset so this driver covers a fair amount of hardware. I know that it works with the Alteon AceNIC, 3Com 3c985 and Netgear GA620, however it should also work with the DEC/Compaq EtherWORKS 1000, Silicon Graphics Gigabit ethernet board, NEC Gigabit Ethernet board and maybe even the IBM and and Sun boards. The Netgear board is the cheapest (~$350US) but still yields fairly good performance.
Support is provided for jumbo frames with all adapters (just set the MTU to something larger than 1500 bytes), as well as hardware multicast filtering and vlan tagging (in conjunction with the vlan support in -current, which I should merge into -stable soon). There are some hooks for checksum offload support, but they're turned off for now since FreeBSD doesn't have an officially sanctioned way to support checksum offloading (yet).
I have not added the 'device ti0' entry to GENERIC since the driver with all the firmware compiled in is quite large, and it doesn't really fit into the category of generic hardware.
|
45022 |
25-Mar-1999 |
wpaul |
Fix recurring typo: fine -> file
|
44767 |
15-Mar-1999 |
billf |
1) line 76: "fine" should be "file" 2) line 80: "abso" should be "also"
PR: docs/10496 Submitted by: Osamu Mihara <mihara@prd.fc.nec.co.jp>
|
44663 |
11-Mar-1999 |
yokota |
Oops, syscons.4 hasn't been added to Makefile!
|
44420 |
02-Mar-1999 |
jkoshy |
Typo fix.
PR: docs/10348 Submitted by: Chris Costello <chris@holly.dyndns.org>
|
44222 |
23-Feb-1999 |
wpaul |
Minor updates for the ASIX AX88141, which is a newer version of the AX88140A with power management and magic packet support. Correct the addresses of the PCI power management registers and add some code to detect the revision ID of the AX88141 and identify it in the probe messages.
No other changes are needed since the AX88141 is functionally identical to the AX88140A.
|
44192 |
21-Feb-1999 |
n_hibma |
Added man page usb uhci ohci
|
44115 |
18-Feb-1999 |
fenner |
Spell ".Fx" properly.
|
44000 |
14-Feb-1999 |
nsouch |
Move lp.4 to man4. It is not i386 dependent.
Fix ppbus and lpt declaration ('0' forgotten). Add info about retrieving printer status with 'cat /dev/lpt0'.
|
43991 |
14-Feb-1999 |
nsouch |
Create new lpt manpage with ppbus info and the original lpt info.
Fix lp.4 ppbus terminology.
|
43980 |
13-Feb-1999 |
fenner |
Fix .Fx usage.
|
43971 |
13-Feb-1999 |
nsouch |
Add alpm.4, Aladdin Power Management SMBus support for the SMBus framework.
|
43844 |
10-Feb-1999 |
yokota |
- Revise text, and fix typos and grammatical errors. - Add syscons.4.
If there still are errors, whether technical or grammatical, they are entirely mine, not the reviewers'.
Reviewed by: sos, jkh, archie, Nick Hilliard <nick@iol.ie>
|
43828 |
10-Feb-1999 |
des |
Remove the lpt(4) page, and fix references in the lp(4) and rdp(4) pages. Also fix a language nit in the rdp(4) page.
|
43725 |
07-Feb-1999 |
yokota |
- Add atkbd.4, atkbdc.4, splash.4 and vga.4. - Update pcvt.4 and psm.4 to reflect recent keyboard driver changes.
|
43640 |
05-Feb-1999 |
mjacob |
document new features
|
43396 |
29-Jan-1999 |
wpaul |
Add two additional cards to the supported adapters list: the Racore 8165 and Racore 8148 adapters are now supported by the ThunderLAN driver. The 8165 is just a plain vanilla 10/100 card; the 8148 is a 'multi- personality' adapter which can support 10baseT, 100baseTX and 100baseFX if you include the proper modules.
Also update the tl man page to mention the Racore cards.
|
43230 |
26-Jan-1999 |
yokota |
Added descriptions on new flags introduced in psm.c rev.1.57.
|
43102 |
23-Jan-1999 |
nsouch |
Remove imm.4, merged with vpo.4
Fix vpo.4 manpage generation in Makefile Fix bootflags bits description in ppc.4
|
42894 |
20-Jan-1999 |
jkh |
Remove man page links too, making the world work again.
Forgotten by: msmith
|
42879 |
20-Jan-1999 |
msmith |
Alog is gone.
|
42806 |
18-Jan-1999 |
wpaul |
Mention that the CNet Pro110B is supported (ax driver).
|
42526 |
11-Jan-1999 |
wpaul |
Doh... han an occurance of MX that should have been PN (forgot to change it when I turn a copy of mx.4 into pn.4).
Pointed out by: Jason Wright <jason@thought.net>
|
42444 |
09-Jan-1999 |
wpaul |
Add driver support (and man page) for PCI fast ethernet cards based on the ASIX AX88140A chip. Update /sys/conf/files, RELNOTES.TXT, /sys/i388/i386/userconfig.c, sysinstall/devices.c, GENERIC and LINT accordingly.
For now, the only board that I know of that uses this chip is the Alfa Inc. GFC2204. (Its predecessor, the GFC2202, was a DEC tulip card.) Thanks again to Ulf for obtaining the board for me. If anyone runs across another, please feel free to update the man page and/or the release notes. (The same applies for the other drivers.)
FreeBSD should now have support for all of the DEC tulip workalike chipsets currently on the market (Macronix, Lite-On, Winbond, ASIX). And unless I'm mistaken, it should also have support for all PCI fast ethernet chipsets in general (except maybe the SMC FEAST chip, which nobody seems to ever use, including SMC). Now if only we could convince 3Com, Intel or whoever to cough up some documentation for gigabit ethernet hardware.
Also updated RELNOTEX.TXT to mention that the SVEC PN102TX is supported by the Macronix driver (assuming you actually have an SVEC PN102TX with a Macronix chip on it; I tried to order a PN102TX once and got a box labeled 'Hawking Technology PN102TX' that had a VIA Rhine board inside it).
|
42224 |
01-Jan-1999 |
peter |
restore pcvt(4) man page
Reviewed by: core
|
42083 |
27-Dec-1998 |
phk |
Pre 3.0 branch cleanup casualty #6: ft
|
42079 |
27-Dec-1998 |
phk |
Pre 3.0 branch cleanup casualty #5: nca, sea, wds, uha
No CAM drivers available. If somebody CAMifies one of these, they will be welcome back in the tree
|
42078 |
27-Dec-1998 |
phk |
Pre 3.0 branch cleanup casualty #4: pcvt
|
42077 |
27-Dec-1998 |
phk |
Pre 3.0 branch cleanup casualty #3: 3c505 ethernet support
|
42052 |
24-Dec-1998 |
wpaul |
Correct the name of the SMC 1211-TX: it's called the EZ Card 10/100 PCI, not EtherEZ.
|
41999 |
22-Dec-1998 |
joerg |
For whatever reason, i've thrown away this change yesterday instead of committing it: include rdp.4.
Pointed out by: bde
|
41981 |
21-Dec-1998 |
joerg |
This commit was generated by cvs2svn to compensate for changes in r41980, which included commits to RCS files with non-trunk default branches.
|
41914 |
18-Dec-1998 |
jkoshy |
Fix spelling nits.
PR: docs/9115 Submitted by: Kris Kennaway <kkennawa@physics.adelaide.edu.au>
|
41590 |
07-Dec-1998 |
wpaul |
Un-revert typo fix (fauled -> failed). This is what I get for not keeping my local RCS files in sync with the rest of the world.
Caught red-handed by: bde
|
41569 |
07-Dec-1998 |
wpaul |
if_rl.c: make a small tweak to properly handle the Accton MPX 5030/5038 as a RealTek 8139 if_rlreg.h: use bus_space_read_X() in CSR_READ_X() macros instead of directly calling inb()/outb() etc... rl.4 + RELNOTES.TXT: mention that SMC EtherEZ PCI 1211-TX is supported by the RealTek driver
|
41538 |
05-Dec-1998 |
rnordier |
Fix typos (dexktop, ot)
|
41537 |
05-Dec-1998 |
rnordier |
Fix typo (fauled)
|
41502 |
04-Dec-1998 |
wpaul |
An early Christmas present: add driver support for a whole bunch of PCI fast ethernet adapters, plus man pages.
if_pn.c: Netgear FA310TX model D1, LinkSys LNE100TX, Matrox FastNIC 10/100, various other PNIC devices
if_mx.c: NDC Communications SOHOware SFA100 (Macronix 98713A), various other boards based on the Macronix 98713, 98713A, 98715, 98715A and 98725 chips
if_vr.c: D-Link DFE530-TX, other boards based on the VIA Rhine and Rhine II chips (note: the D-Link and certain other cards that actually use a Rhine II chip still return the PCI device ID of the Rhine I. I don't know why, and it doesn't really matter since the driver treats both chips the same anyway.)
if_wb.c: Trendware TE100-PCIE and various other cards based on the Winbond W89C840F chip (the Trendware card is identical to the sample boards Winbond sent me, so who knows how many clones there are running around)
All drivers include support for ifmedia, BPF and hardware multicast filtering.
Also updated GENERIC, LINT, RELNOTES.TXT, userconfig and sysinstall device list.
I also have a driver for the ASIX AX88140A in the works.
|
41244 |
18-Nov-1998 |
wpaul |
Mention in the man page that the Accton 1207D adapter is supported.
|
40997 |
07-Nov-1998 |
wpaul |
Spell November correctly.
|
40996 |
07-Nov-1998 |
wpaul |
Add man page for the RealTek 8129/8139 driver.
|
40960 |
06-Nov-1998 |
obrien |
Add a few HP's with on-board Ethernet controlers that are supported by this driver.
|
40917 |
04-Nov-1998 |
nsouch |
Add few declaration for the iicbus/smbus system.
|
40740 |
29-Oct-1998 |
nate |
tx(4) - misspelled word
PR: misc/8491 Submitted by: billf@jade.chc-chimes.com
|
40723 |
29-Oct-1998 |
bde |
Don't install the lp.4 -> plip.4 links, since the important one of them clobbers the new plip.4 non-link.
|
40720 |
29-Oct-1998 |
bde |
`vector xxxintr' should cause a syntax error.
|
40719 |
29-Oct-1998 |
bde |
Fixed missing link and disordering in previous commit.
|
40685 |
28-Oct-1998 |
nsouch |
ppc.4 moved from man4 to man4.i386: parallel port chipset driver manpage
pcf.4 added: Philips I2C/isa interface manpage
|
40585 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Fixed some missing closing quotes.
|
40584 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Quote the last few args to form 1 arg. Quoting them in pairs almost defeated the point of quoting them, which is to reduce the arg count to <= 9.
|
40583 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Don't quote IO_KBD.
|
40582 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Format "irq ?" the same as in other man pages.
|
40581 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Use .Cd instead of a a home made format.
Don't quote IO_KBD.
|
40580 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Fixed the port name, and don't quote it. IO_NPX0 never existed.
|
40579 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Fixed quoting of IO_ASC1.
|
40578 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
|
40575 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Use the correct macro in configuration declarations. .Cm somehow gave the same results as .Cm.
|
40462 |
16-Oct-1998 |
ken |
Add the dpt(4) man page.
Reviewed by: ken Submitted by: gibbs
|
40461 |
16-Oct-1998 |
ken |
Update the bt(4) man page for CAM.
Reviewed by: ken Submitted by: gibbs
|
40460 |
16-Oct-1998 |
ken |
Add in the adv(4) and adw(4) man pages for the AdvanSys narrow and wide SCSI controllers, respectively.
Once these drivers are tested on the alpha, these man pages can probably be moved up a directory to reflect the fact that they're architecture independent.
An mdoc guru should probably look at the AUTHORS sections in both of these pages -- the .An macro seems to cause strange spacing problems.
Reviewed by: ken Submitted by: gibbs
|
40453 |
16-Oct-1998 |
gibbs |
Update to include all supported chips.
Add a table comparing the features of all aic7xxx chips.
Clean up the discussion of SCB paging.
Reviewed by: Kenneth Merry <ken@FreeBSD.org>
|
40442 |
16-Oct-1998 |
ken |
Update the aha(4) and ahb(4) man pages for CAM.
Reviewed by: ken Submitted by: gibbs
|
40407 |
15-Oct-1998 |
wosch |
Added reference to ifconfig(8).
|
40406 |
15-Oct-1998 |
wosch |
Added manpage link plip.4 -> lp.4
|
40405 |
15-Oct-1998 |
wosch |
Add reference to lp(4).
|
39453 |
18-Sep-1998 |
jkoshy |
Added names of additional controller chips supported by the NCR driver to the manual page.
PR: 7967 Submitted by: Stefan Eggers <seggers@semyam.dinoco.de>
|
38702 |
31-Aug-1998 |
wosch |
Sort cross references.
|
38550 |
26-Aug-1998 |
jkoshy |
Remove identity crisis in ispcvt(8) man page. Include reference to ispcvt(8) in pcvt(4).
PR: docs/7743 Submitted by: <k-horik@yk.rim.or.jp>
|
38430 |
19-Aug-1998 |
jkoshy |
Add "pcm.4" to Makefile.
PR: 7636 Submitted by: <Janick.Taillandier@ratp.fr>
|
38399 |
17-Aug-1998 |
bde |
Fixed order and formatting.
|
38367 |
16-Aug-1998 |
wpaul |
Ack! I edited the MLINKS entry but forgot to add xl.4 to the MAN$= line. *hangs head in shame*
|
38366 |
16-Aug-1998 |
wpaul |
Whoops... really add the man page and update the Makefile this time.
|
38204 |
09-Aug-1998 |
jkh |
New man page for pcm(4) driver. Me, I think this is more likely generic and should go one level up, but it can keep the sb(4) man page company for now until somebody moves all the no-longer-x86-specific driver man pages up some day. Submitted by: luigi
|
37941 |
29-Jul-1998 |
kjc |
add en ATM driver manual.
|
37786 |
20-Jul-1998 |
msmith |
Add a section 4 manpage for the 'cs' driver.
|
37254 |
29-Jun-1998 |
hoek |
Fix .Ar usage. Add .Xrefs as appropriate.
|
37251 |
29-Jun-1998 |
hoek |
A little typos and grammer fixes.
|
37022 |
17-Jun-1998 |
jkoshy |
Add mention of Intel EtherExpress 16 cards in the supported list.
Noticed by: Bob Van Valzah <Bob@WhiteBarn.com> on the -doc list.
|
36950 |
13-Jun-1998 |
steve |
miserable -> miserably
PR: 6922 Submitted by: Sue Blake <sue@welearn.com.au>
|
36753 |
08-Jun-1998 |
jkoshy |
Spelling fixes.
Submitted by: Josh Gilliam <josh@quick.net> PR: 6880
|
36624 |
04-Jun-1998 |
charnier |
Use .Ar instead of .ar. Correct incorrect use of .Sm (detected by Paul (pst)).
|
36493 |
31-May-1998 |
bde |
Undocumented flags which went away a few minutes ago. Undocumented auto FIFO trigger level adjustment which went away years ago.
|
36271 |
21-May-1998 |
wpaul |
Add man page for ThunderLAN driver.
|
36029 |
14-May-1998 |
pst |
Add an example showing how to build a UFS floppy
|
35513 |
29-Apr-1998 |
andreas |
Fixes incorrect company and product names in uha(4) manpage and LINT config file. Should be merged to -STABLE as well. PR: closes 6447 Submitted by: Steven Plite splite@purdue.edu
|
35112 |
09-Apr-1998 |
sos |
Add the LBA addressing flag.
|
34842 |
23-Mar-1998 |
peter |
Updates for the new si driver.
Obtained from: Nick Sayer <nick@specialix.com>, and tweaks by me.
|
34504 |
12-Mar-1998 |
charnier |
.Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. Use .An/.Aq.
|
34409 |
09-Mar-1998 |
jkh |
Add man page for the bktr driver. PR: 5954 Submitted by: wlloyd@mpd.ca (with tweaks from reviewer)
|
33915 |
28-Feb-1998 |
jhay |
Update to reflect reality. We do support the WANic 400/405 PCI cards. Fix some typos and clean it up a little.
|
33693 |
20-Feb-1998 |
jkh |
Update docs for new stable-167 driver. Submitted by: Ustimenko Semen <semen@iclub.nsu.ru>
|
33658 |
20-Feb-1998 |
hosokawa |
Updated my e-mail address.
|
33571 |
18-Feb-1998 |
msmith |
Remove qcam manpages Submitted by: pst
|
33096 |
04-Feb-1998 |
jkh |
MF22
|
32880 |
30-Jan-1998 |
jkh |
MF22: Add tx.4 to build list.
|
32866 |
29-Jan-1998 |
jkh |
Add new man page for tx driver. Submitted by: Ustimenko Semen <semen@iclub.nsu.ru>
|
32735 |
24-Jan-1998 |
yokota |
Add brief note on error message from the driver.
|
32583 |
17-Jan-1998 |
pst |
I wrote a poor, but better-than-nothing manual page for the wfd subdriver. Obtained from: od.4
|
32341 |
08-Jan-1998 |
joerg |
Reflect reality when documenting the link-level flags for 3c509 cards.
|
32290 |
06-Jan-1998 |
jamil |
documentation changes.
|
31933 |
22-Dec-1997 |
charnier |
Remove obsolete /etc/hostname.ep? reference. PR: kern/5310 Submitted by: tom@sdf.com
|
31647 |
09-Dec-1997 |
jamil |
excuse me, adding alog.4 man page now forgot to commit previously
|
31646 |
09-Dec-1997 |
jamil |
Added alog.4 man page to /usr/src/share/man/man4/man4.i386/ directory Altered Makefile in that directory so that make builds the alog.4 man page
|
31609 |
07-Dec-1997 |
bde |
Added mouse.4.
|
31606 |
07-Dec-1997 |
yokota |
Document recent mouse code changes.
|
31114 |
11-Nov-1997 |
yokota |
Documented PSM_HOOKAPM and PSM_RESETAFTERSUSPEND options.
|
30575 |
19-Oct-1997 |
joerg |
Document the new fdc(4) flags.
|
30572 |
19-Oct-1997 |
yokota |
Rename MOUSE_GETINFO to MOUSE_GETHWINFO. The name collided with the one in console.h. Pointed out by bde.
|
30318 |
12-Oct-1997 |
peter |
Update de.4 to list new media options. Hopefully this is reasonably correct.
|
30002 |
30-Sep-1997 |
dg |
Updated for the new media selection mechanism.
|
29876 |
26-Sep-1997 |
msmith |
Update documentation for the 'ex' driver to indicate that it supports the Pro/10+ cards as well.
|
29398 |
14-Sep-1997 |
joerg |
Explain the newer sio(4) flag values.
Fogotten by: phk, bde
|
29245 |
09-Sep-1997 |
jmg |
add the man page for pnp... also add activate it in the makefile
|
29113 |
04-Sep-1997 |
sos |
Upgrade of EIDE DMA support, Johns comments:
* lots of fixes to error handling-- mostly works now * improve DMA timing config for Triton chipsets-- PIIX4 and UDMA drive still untested * generally improve DMA config in many ways-- mostly cleanup * clean up boot-time messages * rewrite PRD generation algorithm * first wd timeout is now longer, to handle drive spinup
Submitted by: John Hood <cgull@smoke.marlboro.vt.us>
|
28129 |
12-Aug-1997 |
adam |
typo and reword Submitted by: garbanzo@hooked.net (Alex)
|
28029 |
10-Aug-1997 |
joerg |
Add a man page for sb(4).
Submitted by: garbanzo@hooked.net (Alex)
|
27814 |
01-Aug-1997 |
msmith |
New manpage for the Wavelan (wl) driver. Submitted by: Jim Binkley <jrb@cs.pdx.edu>
|
27417 |
15-Jul-1997 |
charnier |
Document the CMD640 option. PR: kern/3742 Submitted by: helbig@MX.BA-Stuttgart.De
|
27402 |
14-Jul-1997 |
obrien |
Add description of the link{0,1,2} flags
|
26827 |
23-Jun-1997 |
steve |
Fix a minor nit in the .Dd macro invocation so that the revision date is displayed correctly.
|
26826 |
23-Jun-1997 |
steve |
Show the real revision date and not the date that this manpage is being viewed.
|
26282 |
30-May-1997 |
max |
Typo fix.
|
26060 |
23-May-1997 |
peter |
wl.4 was missing from the MAN4 list
|
26022 |
23-May-1997 |
msmith |
Add wl.4
Reminded by: joerg
|
26004 |
22-May-1997 |
msmith |
Manpage for the 'wl' Wavelan driver.
|
25932 |
19-May-1997 |
eivind |
`it's'' -> `its'' where appropriate and typo fixes in time2posix.3.
Closes PR docs/3612.
Submitted by: Josh Gilliam <soil@quick.net>
|
25900 |
18-May-1997 |
phk |
Mention that flags 0x10000 disables test#3
|
25724 |
11-May-1997 |
pst |
Update the manual page to call more attention to the probe override flags.
|
25586 |
08-May-1997 |
joerg |
Don't xref a nonexistant pc(4).
PR: docs/3525: pcvt(4) references pc(4)...
|
24926 |
14-Apr-1997 |
bde |
Removed ix.4. Submitted by: roberto
|
24907 |
14-Apr-1997 |
gibbs |
Remove this man page now that the ie driver supports the EtherExpress16.
|
24091 |
21-Mar-1997 |
mpp |
Use the .Fx macro for FreeBSD references for releases prior to 2.0. Use the .Tn macro for generic FreeBSD references. Cleanup other formatting problems noticed while making the above changes.
|
24090 |
21-Mar-1997 |
mpp |
Fix a number of typos and use the .Tn macro where appropriate.
|
23774 |
12-Mar-1997 |
mpp |
Typo police (this one wasn't yours, Joerg :-)
|
23771 |
12-Mar-1997 |
joerg |
Document the various link-level flag for these drivers.
2.2 candidate (after typo police :)
|
23586 |
09-Mar-1997 |
jmg |
replace non-existant ioctl [GP]IO_STRMAP with what really does exist, [GS]ETFKEY...
Definately a 2.2 Candidate
a clean up of this page is to follow.... but I'm not sure I'll have it before 2.2 is to be released...
|
23462 |
07-Mar-1997 |
jmg |
add missing cvs Id lines.
|
23356 |
03-Mar-1997 |
bde |
Improved description of the device names.
|
23354 |
03-Mar-1997 |
bde |
Updated descriptions of minor numbers and files.
Refer to pstat.
Don't attempt to list all the model numbers.
|
23164 |
28-Feb-1997 |
mpp |
The .Fx macro doesn't know about any of the 1.* FreeBSD releases.
|
23027 |
22-Feb-1997 |
mpp |
Add i386 to the .Dt line.
|
23026 |
22-Feb-1997 |
jmg |
this manpage will actually make it's first appearance in 2.2.
2.2 Candidate
|
23021 |
22-Feb-1997 |
mpp |
Remove an unneeded #include line.
Pointed-out-by: bde
|
23020 |
22-Feb-1997 |
mpp |
sysmouse.4 should be in man4.i386.
|
22986 |
22-Feb-1997 |
peter |
Revert $FreeBSD$ back to $Id$
|
22897 |
18-Feb-1997 |
gibbs |
Update to match reality. Give more indepth description of SCB paging and tagged queueing. Mention the AHC_ALLOW_MEMIO option.
|
22300 |
05-Feb-1997 |
mpp |
Fix a bunch of man pages to stop abusing the .Nm macro, along with some other minor fixes for some problems I noticed while making these changes.
Pointed out by: bde
|
22185 |
01-Feb-1997 |
joerg |
Correct the synopsis of some EISA or PCI drivers. They don't take ISA-like arguments (anymore).
|
22148 |
31-Jan-1997 |
mpp |
Minor mdoc cleanup.
|
22144 |
31-Jan-1997 |
mpp |
Update to reflect current include files.
|
22023 |
26-Jan-1997 |
ache |
Add save/restore cursor position escapes
|
22007 |
25-Jan-1997 |
mpp |
Man page police.
|
21916 |
21-Jan-1997 |
jkh |
Add missing entries for de.4, fxp.4, ix.4, le.4, lnc.4, ze.4, and zp.4. Now things build again.
Forgotten Again By: David E. O'Brien :-)
|
21891 |
20-Jan-1997 |
obrien |
Share my poetry with the world. (de.4, fxp.4, ix.4, le.4, lnc.4, ze.4, and zp.4)
Not forgetten this time by: obrien :-)
|
21890 |
20-Jan-1997 |
obrien |
New manpages for various Ethernet drivers, that I didn't see manpages for.
Manpage police??? Looking kinda bored there aren't you? Need something to do? :-) I'm sure there's work here to be done.
Inspired by: Joerg
2.2-R candidate after Mike gets thru with them.
|
21889 |
20-Jan-1997 |
obrien |
Added some verbage from looking at the source code.
|
21888 |
20-Jan-1997 |
obrien |
Driver also supports the HP PC Lan+ adaptor.
Reviewed by: personally tested. :-)
|
21868 |
19-Jan-1997 |
mpp |
Man page police.
|
21867 |
19-Jan-1997 |
mpp |
Actually install the new ex.4 man page.
Forgotten by: David E. O'Brien
|
21864 |
19-Jan-1997 |
obrien |
Basic manpage for the ex driver (Intel EtherExpress Pro/10).
Desired by: Joerg
|
21786 |
16-Jan-1997 |
alex |
Sweep through the tree fixing mmap() usage:
- Use MAP_FAILED instead of the constant -1 to indicate failure (required by POSIX). - Removed flag arguments of '0' (required by POSIX). - Fixed code which expected an error return of 0. - Fixed code which thought any address with the high bit set was an error. - Check for failure where no checks were present.
Discussed with: bde
|
21721 |
15-Jan-1997 |
sos |
Latest fixes for the psm mouse device, also updates the docs to reflect the new options etc..
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
|
21673 |
14-Jan-1997 |
jkh |
Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!) avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been insane otherwise.
|
21144 |
31-Dec-1996 |
mpp |
Mdoc police..
|
21027 |
29-Dec-1996 |
wosch |
add 'i386' to macro .Dt
|
20920 |
26-Dec-1996 |
wosch |
Sort cross references.
|
20782 |
21-Dec-1996 |
mpp |
Convert to mdoc format.
|
20618 |
18-Dec-1996 |
obrien |
Added $Id$. Added more verbage about the card, and documented the driver's bugs.
2.2-R candidate.
|
20464 |
14-Dec-1996 |
mpp |
Remove a bad xref, and reference a couple of more useful ones instead. Closes PR# 1141.
|
20243 |
09-Dec-1996 |
mpp |
Minor formatting/style fixes.
Submitted by: Sandro Sigala <sandro@cat.local.net> as part of PR # 2134
|
20169 |
06-Dec-1996 |
nate |
Added psm manpage.
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
|
18610 |
01-Oct-1996 |
pst |
Add a warning about SCB paging. Suggested by: gibbs
|
18480 |
23-Sep-1996 |
wosch |
add missing comma(s) in .Xr macros
|
17784 |
22-Aug-1996 |
mpp |
Use the .Fx macro to specify FreeBSD version where appropriate.
|
17762 |
21-Aug-1996 |
mpp |
Update a bunch of man pages to use the .Fx macro to specify FreeBSD versions.
|
17239 |
21-Jul-1996 |
phk |
Document the flags.
|
17085 |
11-Jul-1996 |
mpp |
Fix a spelling error.
|
17084 |
11-Jul-1996 |
mpp |
Add a man page for the "aic" deive (Adaptec AIC 6260/6360 SCSI controller chips).
Obtained from: NetBSD
|
17082 |
11-Jul-1996 |
mpp |
Add a man page for the "wt" device (Archive/Wangtec QIC-02 & QIC-36 interface boards).
Submitted by: NetBSD
|
17081 |
11-Jul-1996 |
mpp |
Minor style fixup.
|
17080 |
11-Jul-1996 |
mpp |
Add a man page for the "ncr" device (NCR 53C810 & 5C825 SCSI controllers).
Obtained from: NetBSD
|
17079 |
11-Jul-1996 |
mpp |
Add a man page for the "ep" device (3com 3c5x9 ethernet card).
Obtained from: NetBSD
|
17078 |
11-Jul-1996 |
mpp |
Add a man page for the "el" device (3com 3c501 ethernet card).
Obtained from: NetBSD
|
17077 |
11-Jul-1996 |
mpp |
Add a man page for the "eg" device (3com 3c505).
Obtained from: NetBSD
|
17076 |
10-Jul-1996 |
mpp |
Fix a minor formatting problem.
|
16996 |
07-Jul-1996 |
wosch |
add 'speaker' to section NAME add spkrtest(8) to section SEE ALSO
|
16987 |
06-Jul-1996 |
jhay |
Add the sr.4 man page so that it gets installed.
|
16981 |
05-Jul-1996 |
jhay |
This driver supports the SDL Communications RISCom/N2 ISA cards that is based on the HD64570 chip. Both the 1 and 2 port cards is supported.
Line speeds of up to 2Mbps is possible. At this speed about 95% of the bandwidth is usable with 486DX processors.
The standard FreeBSD sppp code is used for the link level layer. The default protocol used is PPP. The Cisco HDLC protocol can be used by adding "link2" to the ifconfig line in /etc/sysconfig or where ever ifconfig is run.
At the moment only the X.21 interface is tested. The others may need tweaks to the clock selection code.
|
16962 |
04-Jul-1996 |
wosch |
add manpage link speaker.4 -> spkr.4
|
16954 |
04-Jul-1996 |
mpp |
Link the pcvt.4 man page to vt.4 so that anyone examining their kernel configuration file can do "man vt" and get what they expect.
|
15437 |
28-Apr-1996 |
gibbs |
Bring back the AHC_TAGENABLE compile option and document it. You must use this option to get tagged queuing. Just like the old days.
|
15333 |
20-Apr-1996 |
gibbs |
Update to face reality. We now support the aic7850, aic7860 and aic7880.
Mention Ultra support and SCB paging.
Remove references to AHC_TAGENABLE.
|
15128 |
08-Apr-1996 |
mpp |
Update the scd(4) man page to reflect the current copyright status and to update some path references.
|
15082 |
07-Apr-1996 |
mpp |
Correct some man page cross references and file location references.
|
14987 |
01-Apr-1996 |
wollman |
Add /usr/share/examples/perfmon and /usr/include/machine/perfmon.h to the FILES section.
|
14891 |
28-Mar-1996 |
wollman |
Document the change in how the START and STOP ioctls operate (counters can be started and stopped in numerical order brather than all at once).
|
14826 |
26-Mar-1996 |
wollman |
Add a man page for the perfmon driver.
|
14729 |
21-Mar-1996 |
jkh |
Whoops, it might be nice if we actually *installed* the vx man page. Noticed by: Juha Inkari <inkari@snakemail.hut.fi>
|
14689 |
19-Mar-1996 |
nate |
"options APM" is no longer necessary for APM support.
|
14653 |
17-Mar-1996 |
jkh |
Whoops, don't forget the man page that goes with the previous commit. Submitted-by: M. Sekiguchi <seki@sysrap.cs.fujitsu.co.jp>
|
14391 |
05-Mar-1996 |
phk |
Manpage on the "Laplink" TCP/IP support.
Reviewed by: phk Submitted by: Andrew.Gordon@net-tel.co.uk
|
14048 |
12-Feb-1996 |
mpp |
Added an i386/FreeBSD specific mtio(4) man page, adapted from the Lite-2 vax version.
|
14042 |
12-Feb-1996 |
mpp |
Fixed some minor formatting problems to silence manck some more. Corrected some bogus cross references to man pages that we don't/won't have and either deleted them, or found a more appropriate man page that we do have. Various other minor changes to silence manck.
Manck is currently down to about 200 lines of errors, down from the 500 - 600+ when I started all this.
|
14038 |
11-Feb-1996 |
mpp |
Correct a bunch of man page cross references and generally try and silence "manck".
ncurses, rpc, and some of the gnu stuff are still a big mess, however.
|
14003 |
09-Feb-1996 |
mpp |
Add some missing MLINKS, correct some cross references, correct some file locations and some minor formatting/style problems.
|
13976 |
08-Feb-1996 |
mpp |
Link some man pages from man*/i386/xxx to man*/xxx so that you can actually look at them.
|
13934 |
06-Feb-1996 |
mpp |
I forgot to move gsc.4 to the correct makefile after moving it from man4 to man4/man4.i386. Pointed out by bde again.
|
13921 |
05-Feb-1996 |
mpp |
gsc.4 should reside in share/man/man4.i386 not share/man4.
Pointed out by bde.
|
13903 |
04-Feb-1996 |
pst |
Document ability to skip auto-probe
|
13876 |
03-Feb-1996 |
pst |
Add qcam.4 to directory, was only mlinking
|
13855 |
02-Feb-1996 |
pst |
Add support for Connectix QuickCam(tm)
|
13669 |
28-Jan-1996 |
jkh |
Man page for the vx driver. Submitted by: Frederick Earl Gray <fgray@owlnet.rice.edu>
|
13502 |
19-Jan-1996 |
wollman |
More man page cleanups.
|
13485 |
18-Jan-1996 |
wollman |
The is driver has been superseded by the lnc driver, so don't install the is.4 man page.
|
13152 |
01-Jan-1996 |
bde |
Added io.4.
|
13147 |
01-Jan-1996 |
joerg |
Document the /dev/io security hole.
|
13122 |
30-Dec-1995 |
peter |
recording cvs-1.6 file death
|
13104 |
29-Dec-1995 |
bde |
Added support for the Hayes ESP serial card.
Submitted by: Sean Eric Fagan (sef@kithrup.com) Based on code by John Vinopal (banshee@resort.com) Cosmetic (I hope) changes by me (bde).
|
13093 |
29-Dec-1995 |
peter |
A couple more updates to the man page.. 1: the eisa code has not been updated to the 'new style' code yet 2: recieve buffer flushing is now implemented.
|
13083 |
28-Dec-1995 |
adam |
some lines were repeated, spuriously
|
12695 |
09-Dec-1995 |
jmz |
ioctl() args are JOY_SETTIMEOUT and JOY_GETTIMEOUT (only 1 underscore)
|
12444 |
21-Nov-1995 |
peter |
Link up John Hay's ar(4) man page.. This shouldn't conflict with ar(1) because of the search order...
|
12442 |
21-Nov-1995 |
peter |
This commit was generated by cvs2svn to compensate for changes in r12441, which included commits to RCS files with non-trunk default branches.
|
11897 |
28-Oct-1995 |
pst |
Close out kern/46.
Make documentation match reality. -link2 is used to switch ports on 3COM cards.
|
11866 |
28-Oct-1995 |
dufault |
Add entries for labpc.4, nca.4, scd.4, and sea.4 to the Makefile so that they are installed. The man pages are already present.
|
11784 |
25-Oct-1995 |
jkh |
Sync with version 1(26). Submitted by: Frank Durda IV <uhclem@fw.ast.com>
|
11546 |
17-Oct-1995 |
bde |
Add a man page for the dgb driver.
Submitted by: "Serge A. Babkin" <babkin@hq.icb.chel.su> (English improved a bit by me.)
|
11406 |
10-Oct-1995 |
bde |
Oops, cvs add a man page for the cy driver.
|
11388 |
10-Oct-1995 |
bde |
Disable the documentation about a disabled feature. Fix extra and missing blank lines.
|
11387 |
10-Oct-1995 |
bde |
Add a man page for the cy driver.
|
11051 |
28-Sep-1995 |
bde |
Install si.4. Only the link to it was (unsuccessfully) installed.
|
11044 |
28-Sep-1995 |
jkh |
Doc latest matcd changes. Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
|
11023 |
26-Sep-1995 |
peter |
Add and enable a man page for si(4) - the specialix serial driver.. I couldn't use the original, as it had unusable copyright on the manpage..
(now that must be a first.. the source copyright was fine, the manpage was not..)
|
10822 |
16-Sep-1995 |
jmz |
Add technical specifications, and give the pinout of the game port Submitted by: Joe Greco <jgreco@brasil.moneng.mei.com>
|
10614 |
08-Sep-1995 |
julian |
Submitted by: -Luigi Rizzo (luigi@iet.unipi.it) Obtained from: Luigi Rizzo and Gunther Schadow man page for the asc scanner driver
|
10572 |
06-Sep-1995 |
jkh |
Move and properly add in man page for Matrox Meteor driver. Submitted by: james
|
9478 |
11-Jul-1995 |
jkh |
Documentation changes reflect the new hardware support and change the appearance version to 2.0.5 (was 2.1). Nice and tidy. :-) Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
|
9321 |
26-Jun-1995 |
bde |
Document new config flag for lost output interrupts.
Treat the intitial state device less negatively. It is essential for initializing nonstandard flags such as crtscts.
Delete anachronisms.
|
9311 |
25-Jun-1995 |
joerg |
The joystick driver appeared in FreeBSD 2.0.5, not in 2.1. Closes PR #docs/559
Submitted by: jkh
|
8704 |
22-May-1995 |
rgrimes |
Add the link for apm.4 so you can find the man page.
|
8127 |
28-Apr-1995 |
dufault |
Change to reflect new header file name.
|
8114 |
28-Apr-1995 |
dufault |
Add National Instruments "LabPC" driver
|
8062 |
25-Apr-1995 |
jkh |
Document matcd1. Be more explanatory about port selection. Document that new TEAC drives don't work. Submitted by: Frank Durda IV <uhclem@nemesis.lonestar.org>
|
8028 |
23-Apr-1995 |
wollman |
Add `fe' Ethernet driver man page.
|
7867 |
16-Apr-1995 |
gibbs |
Install ahc.4.
|
7858 |
15-Apr-1995 |
gibbs |
To celibrate the new status of the ahc driver, give it a man page.
Add references to the ahc driver to the other adaptec man pages.
Remove the "NOTE" section of the ahb man page that complained about Adaptec's NDA policy preventing 274x driver development.
|
7808 |
13-Apr-1995 |
jkh |
Get the matcd manpage linked into the parent directory like the others.
|
7719 |
09-Apr-1995 |
jkh |
Add matcd.4 to list of manpages.
|
7716 |
09-Apr-1995 |
jkh |
A new man page for the matcd driver. Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
|
7678 |
08-Apr-1995 |
joerg |
pcvt is proud enough to have a man page. :)
|
7668 |
08-Apr-1995 |
joerg |
Upgrade pcvt to 3.20 b24.
|
7481 |
30-Mar-1995 |
ache |
Add Delete key description Fix Right window/Left window/Menu keys numbers
|
6644 |
22-Feb-1995 |
jmz |
Put the joystick status in a struct {int x, y, b1, b2;} rather than in a dummy array of 4 integers. Declare the struct in the header file and update the man page.
|
6627 |
22-Feb-1995 |
jkh |
Add a man page for the Sony CDROM driver. Other driver authors, you might do a quick check here..
|
6411 |
15-Feb-1995 |
wollman |
Move apm(4) to i386 section, since it is i386-specific.
|
6196 |
05-Feb-1995 |
jkh |
Add man page for pcvt console driver. Submitted by: hm
|
5994 |
28-Jan-1995 |
sos |
Third round in syscons update.
Display update method changed, now allways write in memory buffer, then periodically update physical display. Speed improvements (now > 5 times faster than the old syscons). History now circular buffer, with changeable size. History scroll by up/down line, up/down page, home and end. Backtab proberly implemented. Now space for 96 function keys, 63 allocated standard, default now SCO/SYSV compat again as in the old days. New keyboard definition files ~share/syscons/keymaps/* Misc fixes for old "hacks" that broke SCO/SYSV compat. More that I forgot before writing this...
|
5954 |
27-Jan-1995 |
phk |
Man page for the new nca driver.
|
5939 |
26-Jan-1995 |
ache |
Upgrade Back tab & Keypad 5 info
|
5930 |
26-Jan-1995 |
ache |
Describe Left window, Right window and Menu keys
|
5925 |
26-Jan-1995 |
ache |
Describe Delete key
|
5909 |
25-Jan-1995 |
jmz |
Add joystick man page
|
5886 |
25-Jan-1995 |
dg |
Add links from mem.4 to kmem.4.
|
5561 |
13-Jan-1995 |
ache |
Add more funkeys, correct existen ones
|
5557 |
13-Jan-1995 |
ache |
Add more termcap capabilities, correct one escape
|
5536 |
12-Jan-1995 |
sos |
First round in syscons update. Several new features has been added:
No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
|
5468 |
10-Jan-1995 |
jkh |
Latest changes from vak. Submitted by: vak
|
5304 |
31-Dec-1994 |
jkh |
Add seagate driver manpage from Serge Vakulenko (vak@cronyx.ru) . Submitted by: serge
|
5075 |
12-Dec-1994 |
ache |
add mcd.4
|
5074 |
12-Dec-1994 |
ache |
Mitsumi manpage Submitted by: Keith E. Walker with small modifications from me
|
5007 |
06-Dec-1994 |
bde |
Don't refer to "hardwired" ports.
|
4983 |
05-Dec-1994 |
ache |
Reflect lastest serial names change
|
4950 |
04-Dec-1994 |
bde |
Add cx.4 to MLINKS.
Someone should fix `man' so that man pages in machine-dependent subdirectories are handled automagically at least for the current machine.
|
4914 |
03-Dec-1994 |
wollman |
Add cx(4) to the Makefile.
|
4911 |
02-Dec-1994 |
wollman |
This commit was generated by cvs2svn to compensate for changes in r4910, which included commits to RCS files with non-trunk default branches.
|
4062 |
01-Nov-1994 |
phk |
The latest user-land changes from the author. I added a big warning to the apm.4 man-page. I also hope the Makefiles make sense now.
Submitted by: HOSOKAWA Tatsumi
|
4029 |
31-Oct-1994 |
ats |
Changed all occurences of GENERICAH/GENERICBT to a simple GENERIC in the man pages.
|
3930 |
27-Oct-1994 |
bde |
Restore fd.4 to a machine-independent directory.
|
3927 |
27-Oct-1994 |
jkh |
Change hardwired irqs to soft irqs (?). Add manpage for Buslogic cards, since we didn't have one.
|
3244 |
30-Sep-1994 |
jkh |
Reshuffle all the man pages around in the Makefiles too (duh!).
|
3199 |
29-Sep-1994 |
jkh |
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte
|
2240 |
23-Aug-1994 |
dg |
Woops, "8/16 mode" should read "8/16bit mode".
|
2238 |
23-Aug-1994 |
dg |
Added manual page for my ethernet driver - if_ed.c, and removed old manual page for the com driver (which is no longer in our source tree).
|
2237 |
23-Aug-1994 |
dg |
Corrected kernel base address.
|
1743 |
15-Jun-1994 |
jkh |
Flags 0x80 now means enable the diags, not disable.
|
1682 |
05-Jun-1994 |
ats |
Added a manpage for the tw device. Changed the Makefile to install that manpage into the proper place.
|
1674 |
04-Jun-1994 |
ache |
Updated for new sio driver
|
1669 |
01-Jun-1994 |
ache |
Remove obsoleted COM_BIDIR, FIFO_TRIGGER_* and "comcontrol bidir" references
|
1532 |
22-May-1994 |
csgr |
Add some clarifications to lpt manpage, remove lpa manpage.
|
1463 |
07-May-1994 |
ache |
Correct reference to master port: really it is last port on card, not first.
|
1341 |
06-Apr-1994 |
csgr |
Update lpt(4) man page to reflect recent changes to the lpt device driver. (also point out that lpa is now defunct.)
|
1272 |
18-Mar-1994 |
ache |
Some changes from Julian Stacey installed
|
1180 |
19-Feb-1994 |
ache |
English corrected.
|
1177 |
19-Feb-1994 |
ache |
We lost ttyd for dialin, now restore it.
|
1172 |
17-Feb-1994 |
rgrimes |
Put the flags field in the right place so that config does not complain about improper syntax.
|
1171 |
17-Feb-1994 |
ache |
Previous version restored back after Jordan's damage. I already update this manpage from wilko, moreover, I fix some his bugs and add some new material.
Jordan, pleeease, do following commands *before* each your commit: cvs update <file> cvs rlog <file> and after update (before commit) cvs diff -c <file> It can saves my life time at least...
|
1165 |
16-Feb-1994 |
jkh |
Much improved manpage from wilko@idca.tds.philips.nl
|
1150 |
13-Feb-1994 |
ache |
Man page update from wilko@idca.tds.philips.nl
|
1143 |
11-Feb-1994 |
ache |
com.4 restored back
|
1136 |
09-Feb-1994 |
ache |
Remove nonexistent com driver manpage. Describe some additional features of sio.
|
1099 |
06-Feb-1994 |
ats |
Fixed a little typo in the spkr.4 man page.
|
1079 |
03-Feb-1994 |
wollman |
Eliminate references to the ``U word'' and make page conform to Berkeley conventions for formatting. (Print it out on a PostScript printer to see the difference.)
|
1061 |
01-Feb-1994 |
nate |
From: sos@login.dkuug.dk (S|ren Schmidt) Subject: syscons-1.3 Date: Sat, 29 Jan 94 23:33:50 MET
But here is the (hopefully) final syscons-1.3....
....
I've changed sgetc so it works as the pccons parallel (it now uses a scgetc internally).
[ There were a couple changes that Bruce Evans sent me that were applied to this version along with some changes that S'ren didn't incorporate into the final version. There will be only minor changes if anything from this version to his final release. ]
|
739 |
09-Nov-1993 |
ache |
Added octave-tracking. Added the slur-mark feature. Name of ioctl's include sys/spkr.h changed to machine/speaker.h
|
735 |
09-Nov-1993 |
ache |
Virtual consoles now ttyvX, not ttyXX (according to MAKEDEV)
|
642 |
19-Oct-1993 |
rgrimes |
Install mse man page, and create link for it
|
641 |
19-Oct-1993 |
rgrimes |
Move the mse mouse man page to the man4.i386 directory
|
423 |
09-Sep-1993 |
rgrimes |
From: baukno@login.dkuug.dk (S|ren Schmidt) Subject: Patches to syscons/wd
Man pages for keyboard & screen (using syscons)
|
349 |
28-Aug-1993 |
rgrimes |
New manual pages from NetBSD, revised for FreeBSD slightly
|
187 |
23-Jul-1993 |
alm |
add links to ../
|
88 |
02-Jul-1993 |
root |
New manual page system
|
3 |
12-Jun-1993 |
rgrimes |
This commit was generated by cvs2svn to compensate for changes in r2, which included commits to RCS files with non-trunk default branches.
|