- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r279588:
Fix deadlock in IPv6 PCB code.

When several threads are trying to send datagram to the same destination,
but fragmentation is disabled and datagram size exceeds link MTU,
ip6_output() calls pfctlinput2(PRC_MSGSIZE). It does notify all
sockets wanted to know MTU to this destination. And since all threads
hold PCB lock while sending, taking the lock for each PCB in the
in6_pcbnotify() leads to deadlock.

RFC 3542 p.11.3 suggests notify all application wanted to receive
IPV6_PATHMTU ancillary data for each ICMPv6 packet too big message.
But it doesn't require this, when we don't receive ICMPv6 message.

Change ip6_notify_pmtu() function to be able use it directly from
ip6_output() to notify only one socket, and to notify all sockets
when ICMPv6 packet too big message received.

MFC r279684:
tcp6_ctlinput() doesn't pass MTU value to in6_pcbnotify().
Check cmdarg isn't NULL before dereference, this check was in the
ip6_notify_pmtu() before r279588.

PR: 197059
Sponsored by: Yandex LLC

MFC r264582:
Remove unused variable.

PR: 173521

Merge r261582, r261601, r261610, r261613, r261627, r261640, r261641, r261823,
r261825, r261859, r261875, r261883, r261911, r262027, r262028, r262029,
r262030, r262162 from head.

Large flowtable revamp. See commit messages for merged revisions for
details.

Sponsored by: Netflix

MFC r261835:
Drop packets to multicast address whose scop field contains the
reserved value 0.

Sponsored by: Yandex LLC

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Unregister inet/inet6 pfil hooks on vnet destroy.

Discussed with: andre
Approved by: re (rodrigc)

Implement the ip, tcp, and udp DTrace providers. The probe definitions use
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.

Tested by: gnn, hiren
MFC after: 1 month

Migrate structs ip6stat, icmp6stat and rip6stat to PCPU counters.

Use IP6S_M2MMAX macro.

Use IP6STAT_INC/IP6STAT_DEC macros to update ip6 stats.

MFC after: 1 week

- Use m_getcl() instead of hand allocating.
- Do not calculate constant length values at run time,
CTASSERT() their sanity.
- Remove superfluous cleaning of mbuf fields after allocation.
- Replace compat macros with function calls.

Sponsored by: Nginx, Inc.

Use m_getcl() instead of hand made allocation.

Sponsored by: Nginx, Inc.

In additional to the tailq of IPv6 addresses add the hash table.
For now use 256 buckets and fnv_hash function. Use xor'ed 32-bit
s6_addr32 parts of in6_addr structure as a hash key. Update
in6_localip and in6_is_addr_deprecated to use hash table for fastest
lookup.

Sponsored by: Yandex LLC
Discussed with: dwmalone, glebius, bz

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually

Reduce the overhead of locking, use IF_AFDATA_RLOCK() when we are doing
simple lookups.

Sponsored by: Yandex LLC
MFC after: 1 week

Remove the recently added sysctl variable net.pfil.forward.
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.

Suggested by: andre

Remove the IPFIREWALL_FORWARD kernel option and make possible to turn
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.

Sponsored by: Yandex LLC
Discussed with: net@
MFC after: 2 weeks

Deliver IPV6_TCLASS, IPV6_HOPLIMIT and IPV6_PKTINFO cmsgs (if
requested) on IPV6 sockets, which have been marked to be not IPV6_V6ONLY,
for each received IPV4 packet.

MFC after: 3 days

Plug reference leak.

Interface routes are refcounted as packets move through the stack,
and there's garbage collection tied to it so that route changes can
safely propagate while traffic is flowing. In our setup, we weren't
changing or deleting any routes, but the refcounting logic in
ip6_input() was wrong and caused a reference leak on every inbound
V6 packet. This eventually caused a 32bit overflow, and the resulting
0 value caused the garbage collection to run on the active route.
That then snowballed into the panic.

Reviewed by: scottl
MFC after: 3 days

MFp4 bz_ipv6_fast:

Factor out Hop-By-Hop option processing. It's still not heavily used,
it reduces the footprint of ip6_input() and makes ip6_input() more
readable.

Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems

Reviewed by: gnn (as part of the whole)
MFC After: 3 days

MFp4 bz_ipv6_fast:

Hide the ip6aux functions. The only one referenced outside ip6_input.c
is not compiled in yet (__notyet__) in route6.c (r235954). We do have
accessor functions that should be used.

Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems

Reviewed by: gnn (as part of the whole)
MFC After: 3 days
X-MFC: KPI?

Allow to configure net.inet6.ip6.{accept_rtadv,no_radr} by the loader tunables
as well because they have to be configured before interface initialization for
AF_INET6.

Merge multi-FIB IPv6 support from projects/multi-fibv6/head/:

Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.

This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.

Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days

Convert all users of IF_ADDR_LOCK to use new locking macros that specify
either a read lock or write lock.

Reviewed by: bz
MFC after: 2 weeks

Add support for IPv6 to ipfw fwd:
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.

Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)

Add the missing call to ip6_ipsec_filtertunnel() to be able to control
whether decapsulated IPsec packets will be passed to pfil again depending
on the setting of the net.ip6.ipsec6.filtertunnel sysctl.

PR: kern/157670
Submitted by: Manuel Kasper (mk neon1.net)
MFC after: 2 weeks

Fix more continuous/contiguous typos (cf. r215955)

MFp4 CH=183052 183053 183258:

In protosw we define pr_protocol as short, while on the wire
it is an uint8_t. That way we can have "internal" protocols
like DIVERT, SEND or gaps for modules (PROTO_SPACER).
Switch ipproto_{un,}register to accept a short protocol number(*)
and do an upfront check for valid boundries. With this we
also consistently report EPROTONOSUPPORT for out of bounds
protocols, as we did for proto == 0. This allows a caller
to not error for this case, which is especially important
if we want to automatically call these from domain handling.

(*) the functions have been without any in-tree consumer
since the initial introducation, so this is considered save.

Implement ip6proto_{un,}register() similarly to their legacy IP
counter parts to allow modules to hook up dynamically.

Reviewed by: philip, will
MFC after: 1 week

Since r186119 IP6 input counters for octets and packets were not
working anymore. In addition more checks and operations were missing.

In case lla_lookup results in a match, get the ifaddr to update the
statistics counters, and check that the address is neither tentative,
duplicate or otherwise invalid before accepting the packet. If ok,
record the address information in the mbuf. [ as is done in case
lla_lookup does not return a result and we go through the FIB ].

Reported by: remko
Tested by: remko
MFC after: 2 weeks

allocate ipv6 flows from the ipv6 flow zone

reported by: rrs@

MFC after: 3 days

do a proper fix

Pointed out by: np@

MFC after: 3 days

fix compile error on some builds by doing the equivalent of
an "extern VNET_DEFINE" without "__used"

MFC after: 3 days

boot time size the flowtable

MFC after: 3 days

Add flowtable support to IPv6

Tested by: qingli@

Reviewed by: qingli@
MFC after: 3 days

MFP4: @176978-176982, 176984, 176990-176994, 177441

"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 6 days

Replace several instances of 'if (!a & b)' with 'if (!(a &b))' in order
to silence newer GCC versions.

Virtualize the pfil hooks so that different jails may chose different
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.

Sitting aroung in tree waiting to commit for: 2 months
MFC after: 2 months

Improve flexibility of receiving Router Advertisement and
automatic link-local address configuration:

- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
global knob. The default value of the sysctl is 0.

- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
sysctl net.inet6.ip6.auto_linklocal to one for its default
value. The default value of the sysctl is 1.

- Make ND6_IFF_IFDISABLED more robust. It can be used to disable
IPv6 functionality of an interface now.

- Receiving RA is allowed if ip6_forwarding==0 *and*
ND6_IFF_ACCEPT_RTADV is set on that interface. The former
condition will be revisited later to support a "host + router" box
like IPv6 CPE router. The current behavior is compatible with
the older releases of FreeBSD.

- The ifconfig(8) now supports these ND6 flags as well as "nud",
"prefer_source", and "disabled" in ndp(8). The ndp(8) now
supports "auto_linklocal".

Discussed with: bz and jinmei
Reviewed by: bz
MFC after: 3 days

When multiple interfaces exist in the system, with each interface having
an IPv6 address assigned to it, and if an incoming packet received on
one interface has a packet destination address that belongs to another
interface, the routing table is consulted to determine how to reach this
packet destination. Since the packet destination is an interface address,
the route table will return a host route with the loopback interface as
rt_ifp. The input code must recognize this fact, instead of using the
loopback interface, the input code performs a search to find the right
interface that owns the given IPv6 address.

Reviewed by: bz, gnn, kmacy
MFC after: immediately

Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by: bz
Approved by: re (vimage blanket)

Garbage collect vnet module registrations that have neither constructors
nor destructors, as there's no actual work to do.

In most cases, the constructors weren't needed because of the existing
protocol initialization functions run by net_init_domain() as part of
VNET_MOD_NET, or they were eliminated when support for static
initialization of virtualized globals was added.

Garbage collect dependency references to modules without constructors or
destructors, notably VNET_MOD_INET and VNET_MOD_INET6.

Reviewed by: bz
Approved by: re (vimage blanket)

Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used. Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with: bz, julian
Reviewed by: bz
Approved by: re (kensmith, kib)

Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)

Add address list locking for in6_ifaddrhead/ia_link: as with locking
for in_ifaddrhead, we stick with an rwlock for the time being, which
we will revisit in the future with a possible move to rmlocks.

Some pieces of code require significant further reworking to be
safe from all classes of writer-writer races.

Reviewed by: bz
MFC after: 6 weeks

Convert netinet6 to using queue(9) rather than hand-crafted linked lists
for the global IPv6 address list (in6_ifaddr -> in6_ifaddrhead). Adopt
the code styles and conventions present in netinet where possible.

Reviewed by: gnn, bz
MFC after: 6 weeks (possibly not MFCable?)

Modify most routines returning 'struct ifaddr *' to return references
rather than pointers, requiring callers to properly dispose of those
references. The following routines now return references:

ifaddr_byindex
ifa_ifwithaddr
ifa_ifwithbroadaddr
ifa_ifwithdstaddr
ifa_ifwithnet
ifaof_ifpforaddr
ifa_ifwithroute
ifa_ifwithroute_fib
rt_getifa
rt_getifa_fib
IFP_TO_IA
ip_rtaddr
in6_ifawithifp
in6ifa_ifpforlinklocal
in6ifa_ifpwithaddr
in6_ifadd
carp_iamatch6
ip6_getdstifaddr

Remove unused macro which didn't have required referencing:

IFP_TO_IA6

This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc). In a few cases, add missing if_addr_list locking
required to safely acquire references.

Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit. Once
we have mbuf tag deep copy support, this can be fixed.

Reviewed by: bz
Obtained from: Apple, Inc. (portions)
MFC after: 6 weeks (portions)

After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.

Introduce an infrastructure for dismantling vnet instances.

Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state. The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.

While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers. Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.

Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels. Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.

Bump __FreeBSD_version to 800097.
Reviewed by: bz, julian
Approved by: rwatson, kib (re), julian (mentor)

V_loif is not an array but a pure pointer, so treat it as such.

Reviewed by: bz
Approved by: julian (mentor)

Reimplement the netisr framework in order to support parallel netisr
threads:

- Support up to one netisr thread per CPU, each processings its own
workstream, or set of per-protocol queues. Threads may be bound
to specific CPUs, or allowed to migrate, based on a global policy.

In the future it would be desirable to support topology-centric
policies, such as "one netisr per package".

- Allow each protocol to advertise an ordering policy, which can
currently be one of:

NETISR_POLICY_SOURCE: packets must maintain ordering with respect to
an implicit or explicit source (such as an interface or socket).

NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work,
as well as allowing protocols to provide a flow generation function
for mbufs without flow identifers (m2flow). Falls back on
NETISR_POLICY_SOURCE if now flow ID is available.

NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for
each packet handled by netisr (m2cpuid).

- Provide utility functions for querying the number of workstreams
being used, as well as a mapping function from workstream to CPU ID,
which protocols may use in work placement decisions.

- Add explicit interfaces to get and set per-protocol queue limits, and
get and clear drop counters, which query data or apply changes across
all workstreams.

- Add a more extensible netisr registration interface, in which
protocols declare 'struct netisr_handler' structures for each
registered NETISR_ type. These include name, handler function,
optional mbuf to flow ID function, optional mbuf to CPU ID function,
queue limit, and ordering policy. Padding is present to allow these
to be expanded in the future. If no queue limit is declared, then
a default is used.

- Queue limits are now per-workstream, and raised from the previous
IFQ_MAXLEN default of 50 to 256.

- All protocols are updated to use the new registration interface, and
with the exception of netnatm, default queue limits. Most protocols
register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use
NETISR_POLICY_FLOW, and will therefore take advantage of driver-
generated flow IDs if present.

- Formalize a non-packet based interface between interface polling and
the netisr, rather than having polling pretend to be two protocols.
Provide two explicit hooks in the netisr worker for start and end
events for runs: netisr_poll() and netisr_pollmore(), as well as a
function, netisr_sched_poll(), to allow the polling code to schedule
netisr execution. DEVICE_POLLING still embeds single-netisr
assumptions in its implementation, so for now if it is compiled into
the kernel, a single and un-bound netisr thread is enforced
regardless of tunable configuration.

In the default configuration, the new netisr implementation maintains
the same basic assumptions as the previous implementation: a single,
un-bound worker thread processes all deferred work, and direct dispatch
is enabled by default wherever possible.

Performance measurement shows a marginal performance improvement over
the old implementation due to the use of batched dequeue.

An rmlock is used to synchronize use and registration/unregistration
using the framework; currently, synchronized use is disabled
(replicating current netisr policy) due to a measurable 3%-6% hit in
ping-pong micro-benchmarking. It will be enabled once further rmlock
optimization has taken place. However, in practice, netisrs are
rarely registered or unregistered at runtime.

A new man page for netisr will follow, but since one doesn't currently
exist, it hasn't been updated.

This change is not appropriate for MFC, although the polling shutdown
handler should be merged to 7-STABLE.

Bump __FreeBSD_version.

Reviewed by: bz

Merge final round of MLD changes from p4:
ip6_input.c, in6.h:
* Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6.
* Always set this flag if HBH Router Alert option is present for MLD,
even when not forwarding.

icmp6.c:
* In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent.
* Use scope ID for verifying input. Do not apply SSM filters here, no inpcb.
* Check for M_RTALERT_MLD when validating MLD traffic, as we can't see
IPv6 hop options outside of ip6_input().

in6_mcast.c:
* Use KAME scope/zone ID in in6_multi.
* Update net.inet6.ip6.mcast.filters implementation to use scope IDs
for comparisons.
* Fix scope ID treatment in multicast socket option processing.
Scope IDs passed in from userland will be ignored as other less
ambiguous APIs exist for specifying the link.
* Tighten userland input checks in IPv6 SSM delta and full-state ops.
* Source filter embedded scope IDs need to be revisited, for now
just clear them and ignore them on input.
* Adapt KAME behaviour of looking up the scope ID in the default zone
for multicast leaves, when the interface is ambiguous.

mld6.c:
* Tighten origin checks on MLD traffic as per RFC3810 Section 6.2:
* ip6_src MAY be the unspecified address for MLDv1 reports.
* ip6_src MAY have link-local address scope for MLDv1 reports,
MLDv1 queries, and MLDv2 queries.
* Perform address field validation *before* accepting queries.
* Use KAME scope/zone ID in query/report processing.
* Break const correctness for mld_v1_input_report(), mld_v1_input_query()
as we temporarily modify the input mbuf chain.
* Clear the scope ID before handoff to userland MLD daemon.
* Fix MLDv1 old querier present timer processing.
With the protocol defaults, hosts should revert to MLDv2 after 260s.
* Add net.inet6.mld.v1enable sysctl, default to on.

ifmcstat.c:
* Use sysctl by default; -K requests kvm(3) if so compiled.

mld.4:
* Connect man page to build.

Tested using PCS.

Permit buiding kernels with options VIMAGE, restricted to only a single
active network stack instance. Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:

1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables. As an example, V_ifnet becomes:

options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet
default build: vnet_net_0._ifnet
options VIMAGE_GLOBALS: ifnet

2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:

INIT_VNET_NET(ifp->if_vnet); becomes

struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];

3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals. If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.

4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet. options VIMAGE builds
will fill in those fields as required.

5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.

6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod. SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.

Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.

Reviewed by: bz, rwatson
Approved by: julian (mentor)

Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit:
import from p4 bms_netdev. Summary of changes:

* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.

NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.

This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.

Compare protosw pointer with NULL.

MFC after: 1 month

Introduce vnet module registration / initialization framework with
dependency tracking and ordering enforcement.

With this change, per-vnet initialization functions introduced with
r190787 are no longer directly called from traditional initialization
functions (which cc in most cases inlined to pre-r190787 code), but are
instead registered via the vnet framework first, and are invoked only
after all prerequisite modules have been initialized. In the long run,
this framework should allow us to both initialize and dismantle
multiple vnet instances in a correct order.

The problem this change aims to solve is how to replay the
initialization sequence of various network stack components, which
have been traditionally triggered via different mechanisms (SYSINIT,
protosw). Note that this initialization sequence was and still can be
subtly different depending on whether certain pieces of code have been
statically compiled into the kernel, loaded as modules by boot
loader, or kldloaded at run time.

The approach is simple - we record the initialization sequence
established by the traditional mechanisms whenever vnet_mod_register()
is called for a particular vnet module. The vnet_mod_register_multi()
variant allows a single initializer function to be registered multiple
times but with different arguments - currently this is only used in
kern/uipc_domain.c by net_add_domain() with different struct domain *
as arguments, which allows for protosw-registered initialization
routines to be invoked in a correct order by the new vnet
initialization framework.

For the purpose of identifying vnet modules, each vnet module has to
have a unique ID, which is statically assigned in sys/vimage.h.
Dynamic assignment of vnet module IDs is not supported yet.

A vnet module may specify a single prerequisite module at registration
time by filling in the vmi_dependson field of its vnet_modinfo struct
with the ID of the module it depends on. Unless specified otherwise,
all vnet modules depend on VNET_MOD_NET (container for ifnet list head,
rt_tables etc.), which thus has to and will always be initialized
first. The framework will panic if it detects any unresolved
dependencies before completing system initialization. Detection of
unresolved dependencies for vnet modules registered after boot
(kldloaded modules) is not provided.

Note that the fact that each module can specify only a single
prerequisite may become problematic in the long run. In particular,
INET6 depends on INET being already instantiated, due to TCP / UDP
structures residing in INET container. IPSEC also depends on INET,
which will in turn additionally complicate making INET6-only kernel
configs a reality.

The entire registration framework can be compiled out by turning on the
VIMAGE_GLOBALS kernel config option.

Reviewed by: bz
Approved by: julian (mentor)

First pass at separating per-vnet initializer functions
from existing functions for initializing global state.

At this stage, the new per-vnet initializer functions are
directly called from the existing global initialization code,
which should in most cases result in compiler inlining those
new functions, hence yielding a near-zero functional change.

Modify the existing initializer functions which are invoked via
protosw, like ip_init() et. al., to allow them to be invoked
multiple times, i.e. per each vnet. Global state, if any,
is initialized only if such functions are called within the
context of vnet0, which will be determined via the
IS_DEFAULT_VNET(curvnet) check (currently always true).

While here, V_irtualize a few remaining global UMA zones
used by net/netinet/netipsec networking code. While it is
not yet clear to me or anybody else whether this is the right
thing to do, at this stage this makes the code more readable,
and makes it easier to track uncollected UMA-zone-backed
objects on vnet removal. In the long run, it's quite possible
that some form of shared use of UMA zone pools among multiple
vnets should be considered.

Bump __FreeBSD_version due to changes in layout of structs
vnet_ipfw, vnet_inet and vnet_net.

Approved by: julian (mentor)

For all files including net/vnet.h directly include opt_route.h and
net/route.h.

Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.

We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.

This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.

Remove the single global unlocked route cache ip6_forward_rt
from the inet6 stack along with statistics and make sure we
properly free the rt in all cases.

While the current situation is not better performance wise it
prevents panics seen more often these days.
After more inet6 and ipsec cleanup we should be able to improve
the situation again passing the rt to ip6_forward directly.

Leave the ip6_forward_rt entry in struct vinet6 but mark it
for removal.

PR: kern/128247, kern/131038
MFC after: 25 days
Committed from: Bugathon #6
Tested by: Denis Ahrens <denis@h3q.com> (different initial version)

Remove 4 entirely unsued ip6 variables.
Leave then in struct vinet6 to not break the ABI with kernel modules
but mark them for removal so we can do it in one batch when the time
is right.

MFC after: 1 month

Correct variable name in comment.

MFC after: 4 weeks

Only unlock the llentry if it is actually valid.

Reported by: ed

Another step assimilating IPv[46] PCB code - directly use
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().

Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.

Discussed with: rwatson
Reviewed by: rwatson (version before review requested changes)
MFC after: 4 weeks (set the timer and see then)

This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion

Second round of putting global variables, which were virtualized
but formerly missed under VIMAGE_GLOBAL.

Put the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.

Sponsored by: The FreeBSD Foundation

Conditionally compile out V_ globals while instantiating the appropriate
container structures, depending on VIMAGE_GLOBALS compile time option.

Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out. Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.

Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively

#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif

Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.

Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs. This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.

Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.

De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps. PF virtualization will be done
separately, most probably after next PF import.

Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw. Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.

Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation

Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch

Fix a regression introduced in r179289 splitting up ip6_savecontrol()
into v4-only vs. v6-only inp_flags processing.
When ip6_savecontrol_v4() is called from ip6_savecontrol() we
were not passing back the **mp thus the information will be missing
in userland.
Istead of going with a *** as suggested in the PR we are returning
**mp now and passing in the v4only flag as a pointer argument.

PR: kern/126349
Reviewed by: rwatson, dwmalone

Remove NETISR_MPSAFE, which allows specific netisr handlers to be directly
dispatched without Giant, and add NETISR_FORCEQUEUE, which allows specific
netisr handlers to always be dispatched via a queue (deferred). Mark the
usb and if_ppp netisr handlers as NETISR_FORCEQUEUE, and explicitly
acquire Giant in those handlers.

Previously, any netisr handler not marked NETISR_MPSAFE would necessarily
run deferred and with Giant acquired. This change removes Giant
scaffolding from the netisr infrastructure, but NETISR_FORCEQUEUE allows
non-MPSAFE handlers to continue to force deferred dispatch so as to avoid
lock order reversals between their acqusition of Giant and any calling
context.

It is likely we will be able to remove NETISR_FORCEQUEUE once
IFF_NEEDSGIANT is removed, as non-MPSAFE usb and if_ppp drivers will no
longer be supported.

Reviewed by: bz
MFC after: 1 month
X-MFC note: We can't remove NETISR_MPSAFE from stable/7 for KPI reasons,
but the rest can go back.

Remove GIANT_REQUIRED from IPv6 input, forward, and frag6 code. The frag6
code is believed to be MPSAFE, and leaving aside the IPv6 route cache in
forwarding, Giant appears not to adequately synchronize the data structures
in the input or forwarding paths.

Set the IPv6 netisr handler as NETISR_MPSAFE on the basis that, despite
there still being some well-known races in mld6 and nd6, running with
Giant over the netisr handler provides little or not additional
synchronization that might cause mld6 and nd6 to behave better.

Factor out the v4-only vs. the v6-only inp_flags processing in
ip6_savecontrol in preparation for udp_append() to no longer
need an WLOCK as we will no longer be modifying socket options.

Requested by: rwatson
Reviewed by: gnn
MFC after: 10 days

un-__P()

Clean up VCS Ids.

Space cleanup

Approved by: re (rwatson)

ANSIfy[1] plus some style cleanup nearby.

Discussed with: gnn, rwatson
Submitted by: Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by: re (rwatson)

Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing

Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by: bz
Approved by: re
Supported by: Secure Computing

handle IPv6 router alert option contained in an incoming packet per
option value so that unrecognized options are ignored as specified in RFC2711.
(packets containing an MLD router alert option are passed to the upper layer
as before).

Approved by: gnn (mentor), ume (mentor)

Make IPv6 multicast forwarding dynamically loadable from a GENERIC kernel.
It is built in the same module as IPv4 multicast forwarding, i.e. ip_mroute.ko,
if and only if IPv6 support is enabled for loadable modules.
Export IPv6 forwarding structs to userland netstat(1) via sysctl(9).

MFp4: 92972, 98913 + one more change

In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.

With exception of the if_name() macro, all definitions in net_osdep.h
were unused or already in if_var.h so add if_name() to if_var.h and
remove net_osdep.h along with all references to it.

Longer term we may want to kill off if_name() entierly since all modern
BSDs have if_xname variables rendering it unnecessicary.

Remove ip6fw. Since ipfw has full functional IPv6 support now and - in
contrast to ip6fw - is properly lockes, it is time to retire ip6fw.

Somewhat re-factor the read/write locking mechanism associated with the packet
filtering mechanisms to use the new rwlock(9) locking API:

- Drop the variables stored in the phil_head structure which were specific to
conditions and the home rolled read/write locking mechanism.
- Drop some includes which were used for condition variables
- Drop the inline functions, and convert them to macros. Also, move these
macros into pfil.h
- Move pfil list locking macros intp phil.h as well
- Rename ph_busy_count to ph_nhooks. This variable will represent the number
of IN/OUT hooks registered with the pfil head structure
- Define PFIL_HOOKED macro which evaluates to true if there are any
hooks to be ran by pfil_run_hooks
- In the IP/IP6 stacks, change the ph_busy_count comparison to use the new
PFIL_HOOKED macro.
- Drop optimization in pfil_run_hooks which checks to see if there are any
hooks to be ran, and returns if not. This check is already performed by the
IP stacks when they call:

if (!PFIL_HOOKED(ph))
goto skip_hooks;

- Drop in assertion which makes sure that the number of hooks never drops
below 0 for good measure. This in theory should never happen, and if it
does than there are problems somewhere
- Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep
- Drop variables which support home rolled read/write locking mechanism from
the IPFW firewall chain structure.
- Swap out the read/write firewall chain lock internal to use the rwlock(9)
API instead of our home rolled version
- Convert the inlined functions to macros

Reviewed by: mlaier, andre, glebius
Thanks to: jhb for the new locking API

don't embed scope id before running packet filters.

Reported by: YAMAMOTO Takashi <yamt__at__mwd.biglobe.ne.jp>
Obtained from: NetBSD
MFC after: 1 week

supported an ndp command suboption to disable IPv6 in the given interface

Obtained from: KAME
Reviewd by: ume, gnn
MFC after: 2 week

scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.

Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME

update comments:
- RFC2292bis -> RFC3542
- typo fixes

Submitted by: Keiichi SHIMA <keiichi__at__iijlab.net>
Obtained from: KAME

correct bounds check

Noticed by: Coverity Prevent analysis tool

/* -> /*- for license, minor formatting changes, separate for KAME

Be more careful to only index valid IP protocols and be more verbose with
comments.

Add an additional struct inpcb * argument to pfil(9) in order to enable
passing along socket information. This is required to work around a LOR with
the socket code which results in an easy reproducible hard lockup with
debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do
so later. The missing piece is to turn the filter locking into a leaf lock
and will follow in a seperate (later) commit.

This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in
forseeable future.

Suggested by: rwatson
A lot of work by: csjp (he'd be even more helpful w/o mentor-reviews ;)
Reviewed by: rwatson, csjp
Tested by: -pf, -ipfw, LINT, csjp and myself
MFC after: 3 days

LOR IDs: 14 - 17 (not fixed yet)

Always compile PFIL_HOOKS into the kernel and remove the associated kernel
compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.

If no hooks are connected the entire packet filter hooks section and related
activities are jumped over. This removes any performance impact if no hooks
are active.

Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.

Remove in6_prefix.[ch] and the contained router renumbering capability.
The prefix management code currently resides in nd6, leaving only the
unused router renumbering capability in the in6_prefix files. Removing
it will make it easier for us to provide locking for the remainder of
IPv6 by reducing the number of objects requiring synchronized access.

This functionality has also been removed from NetBSD and OpenBSD.

Submitted by: George Neville-Neil <gnn at neville-neil.com>
Discussed with/approved by: suz, keiichi at kame.net, core at kame.net

Get rid of the RANDOM_IP_ID option and make it a sysctl. NetBSD
have already done this, so I have styled the patch on their work:

1) introduce a ip_newid() static inline function that checks
the sysctl and then decides if it should return a sequential
or random IP ID.

2) named the sysctl net.inet.ip.random_id

3) IPv6 flow IDs and fragment IDs are now always random.
Flow IDs and frag IDs are significantly less common in the
IPv6 world (ie. rarely generated per-packet), so there should
be smaller performance concerns.

The sysctl defaults to 0 (sequential IP IDs).

Reviewed by: andre, silby, mlaier, ume
Based on: NetBSD
MFC after: 2 months

Link ALTQ to the build and break with ABI for struct ifnet. Please recompile
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.

__FreeBSD_version bump will follow.

Tested-by: (i386)LINT

do not check super user privilege in ip6_savecontrol. It is
meaningless and can even be harmful.

Obtained from: KAME
MFC after: 3 days

Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson

Move PFIL_HOOKS and ipfw past the scope checks to allow easy redirection to
linklocal.

Obtained from: OpenBSD
Reviewed by: ume
Approved by: bms(mentor)

scope awareness of ff01:: is not merged, yet. So, clear
embeded form of scopeid for ff01:: for now.

Pointed out by: mlaier

- reject incoming packets to an interface-local multicast address from
the wire.
- added a generic scope check, and removed checks for loopback src/dst
addresses.

Obtained from: KAME

supported IPV6_RECVPATHMTU socket option.

Obtained from: KAME

Remove RTF_PRCLONING from routing table and adjust users of it
accordingly. The define is left intact for ABI compatibility
with userland.

This is a pre-step for the introduction of tcp_hostcache. The
network stack remains fully useable with this change.

Reviewed by: sam (mentor), bms
Reviewed by: -net, -current, core@kame.net (IPv6 parts)
Approved by: re (scottl)

o add a flags parameter to netisr_register that is used to specify
whether or not the isr needs to hold Giant when running; Giant-less
operation is also controlled by the setting of debug_mpsafenet
o mark all netisr's except NETISR_IP as needing Giant
o add a GIANT_REQUIRED assertion to the top of netisr's that need Giant
o pickup Giant (when debug_mpsafenet is 1) inside ip_input before
calling up with a packet
o change netisr handling so swi_net runs w/o Giant; instead we grab
Giant before invoking handlers based on whether the handler needs Giant
o change netisr handling so that netisr's that are marked MPSAFE may
have multiple instances active at a time
o add netisr statistics for packets dropped because the isr is inactive

Supported by: FreeBSD Foundation

initialize in6_tmpaddrtimer_ch.

Obtained from: KAME

add management part of address selection policy described in
RFC3484.

Obtained from: KAME

ip6_savecontrol() argument is redundant

hide m_tag, again.

Requested by: sam

make sure to accept only IPv6 packet.

Obtained from: KAME

cleanup use of m_tag.

Obtained from: KAME

Switch Advanced Sockets API for IPv6 from RFC2292 to RFC3542
(aka RFC2292bis). Though I believe this commit doesn't break
backward compatibility againt existing binaries, it breaks
backward compatibility of API.
Now, the applications which use Advanced Sockets API such as
telnet, ping6, mld6query and traceroute6 use RFC3542 API.

Obtained from: KAME

- change scope to zone.
- change node-local to interface-local.
- better error handling of address-to-scope mapping.
- use in6_clearscope().

Obtained from: KAME

- add dom_if{attach,detach} framework.
- transition to use ifp->if_afdata.

Obtained from: KAME

fix horribly botched MFp4 merge

pfil hooks can modify packet contents so check if the destination
address has been changed when PFIL_HOOKS is enabled and, if it has,
arrange for the proper action by ip*_forward.

Submitted by: Pyun YongHyeon
Supported by: FreeBSD Foundation

fixed an endian bug on fragment header scanning

Obtained from: KAME

nuke SCOPEDROUTING. Though it was there for a long time,
it was never enabled.

- fix typo in comments.
- style.
- NULL is not 0.
- some variables were renamed.
- nuke unused logic.
(there is no functional change.)

Obtained from: KAME

return(code) -> return (code)
(reduce diffs against KAME)

randomize IPv6 flowlabel when RANDOM_IP_ID is defined.

Obtained from: KAME

use arc4random()

o update PFIL_HOOKS support to current API used by netbsd
o revamp IPv4+IPv6+bridge usage to match API changes
o remove pfil_head instances from protosw entries (no longer used)
o add locking
o bump FreeBSD version for 3rd party modules

Heavy lifting by: "Max Laier" <max@love2party.net>
Supported by: FreeBSD Foundation
Obtained from: NetBSD (bits of pfil.h and pfil.c)

correct malloc flag argument

Reported by: Kris Kennaway <kris@obsecurity.org>

Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point. Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

don't reference a pkthdr after M_MOVE_PKTHDR has "remove it"; instead
reference the pkthdr now in the destination of the move

Sponsored by: Vernier Networks

Correct mbuf packet header propagation. Previously, packet headers
were sometimes propagated using M_COPY_PKTHDR which actually did
something between a "move" and a "copy" operation. This is replaced
by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it
from the source mbuf) and m_dup_pkthdr which copies the packet
header contents including any m_tag chain. This corrects numerous
problems whereby mbuf tags could be lost during packet manipulations.

These changes also introduce arguments to m_tag_copy and m_tag_copy_chain
to specify if the tag copy work should potentially block. This
introduces an incompatibility with openbsd which we may want to revisit.

Note that move/dup of packet headers does not handle target mbufs
that have a cluster bound to them. We may want to support this;
for now we watch for it with an assert.

Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG.

Supported by: Vernier Networks
Reviewed by: Robert Watson <rwatson@FreeBSD.org>

o Untangle the confusion with the malloc flags {M_WAITOK, M_NOWAIT} and
the mbuf allocator flags {M_TRYWAIT, M_DONTWAIT}.
o Fix a bpf_compat issue where malloc() was defined to just call
bpf_alloc() and pass the 'canwait' flag(s) along. It's been changed
to call bpf_alloc() but pass the corresponding M_TRYWAIT or M_DONTWAIT
flag (and only one of those two).

Submitted by: Hiten Pandya <hiten@unixdaemons.com> (hiten->commit_count++)

Tie new "Fast IPsec" code into the build. This involves the usual
configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).

As noted previously, don't use FAST_IPSEC with INET6 at the moment.

Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks

Replace aux mbufs with packet tags:

o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
inpcb parameter to ip_output and ip6_output to allow the IPsec code to
locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version

Reviewed by: julian, luigi (silent), -arch, -net, darren
Approved by: julian, silence from everyone else
Obtained from: openbsd (mostly)
MFC after: 1 month

__FreeBSD__ is not a compiler constant. We must use
__FreeBSD_version here.

Submitted by: rwatson

Back out my lats commit of locking down a socket, it conflicts with hsu's work.

Requested by: hsu

Lock down a socket, milestone 1.

o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
socket buffer. The mutex in the receive buffer also protects the data
in struct socket.

o Determine the lock strategy for each members in struct socket.

o Lock down the following members:

- so_count
- so_options
- so_linger
- so_state

o Remove *_locked() socket APIs. Make the following socket APIs
touching the members above now require a locked socket:

- sodisconnect()
- soisconnected()
- soisconnecting()
- soisdisconnected()
- soisdisconnecting()
- sofree()
- soref()
- sorele()
- sorwakeup()
- sotryfree()
- sowakeup()
- sowwakeup()

Reviewed by: alfred

just merged cosmetic changes from KAME to ease sync between KAME and FreeBSD.
(based on freebsd4-snap-20020128)

Reviewed by: ume
MFC after: 1 week

Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on: i386, alpha, sparc64

Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on: smp@

Remove duplicate extern declarations to silence warnings.

Initialise the intrq_present fields at runtime, not link time. This allows
us to load protocols at runtime, and avoids the use of common variables.

Also fix the ip6_intrq assignment so that it works at all.

Make faith loadable, unloadable, and clonable.

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

gif(4) and stf(4) modernization:

- Remove gif dependencies from stf.
- Make gif and stf into modules
- Make gif cloneable.

PR: kern/27983
Reviewed by: ru, ume
Obtained from: NetBSD
MFC after: 1 week

Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.

Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks

M_COPY_PKTHDR has to be done before MCLGET.

Obtained from: KAME

Fix typo in previous commit.

Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>

- Fix to receive icmp6 echo reply within the host itself to ff02::1.
- Fix to receive icmp6 echo reply to link-local of itself.

Reported by: Eriya Akasaka <eakasaka@rodfbs.org>
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>

- correct logic of per-address input packet counts for lo0
- reject packets to fe80::xxxx%lo0 (xxxx != 1)

Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>

Make per-address input packet counts for lo0 work.

Reported by: bmah
Submitted by: Noriyasu KATO <noriyasu.kato@toshiba.co.jp> (via itojun)

Merge from kame (1.175 -> 1.176):
cope with freebsd4 bridge code.

Yikes, these files bogusly #include "loop.h" but didn't use the value.
My searching for NLOOP missed them. :-(

Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue. Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue. An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.

Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.

Augment the 'ifaddr' structure with a 'struct if_data' to keep
statistics on a per network address basis.

Teach the IPv4 and IPv6 input/output routines to log packets/bytes
against the network address connected to the flow.

Teach netstat to display the per-address stats for IP protocols
when 'netstat -i' is evoked, instead of displaying the per-interface
stats.

Make ip6fw as loadable module.

Make compilable with -DIPFILTER.
Because I don't use ipfilter at all, this is not tested.
I don't know if ipfilter is work for IPv6.

Submitted by: yoshiaki@kt.rim.or.jp

activate pfil_hooks and covert ipfilter to use it

sync with kame tree as of july00. tons of bug fixes/improvements.

API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
(also syntax change)

Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>

Clean up some loose ends in the network code, including the X.25 and ISO
#ifdefs. Clean out unused netisr's and leftover netisr linker set gunk.
Tested on x86 and alpha, including world.

Approved by: jkh

Add ip6fw.
Yes it is almost code freeze, but as the result of many thought, now I
think this should be added before 4.0...

make world check, kernel build check is done.

Reviewed by: green
Obtained from: KAME project

Backout diffs which should not be included.

#This is a null commit to give correct description for the previous change.
#Please forget the strange log message of the previous commit .

IPv6 multicast routing.
kernel IPv6 multicast routing support.
pim6 dense mode daemon
pim6 sparse mode daemon
netstat support of IPv6 multicast routing statistics

Merging to the current and testing with other existing multicast routers
is done by Tatsuya Jinmei <jinmei@kame.net>, who writes and maintainances
the base code in KAME distribution.

Make world check and kernel build check was also successful.

Obtained from: KAME project

Sorry I didn't commit these files at the commit just a few minutes before.
(IPv6 multicast routing)
I think I mistakenly touched TAB and the last arg sys/netinet6 to
the cvs commit changed to sys/netinet6/in6_proto.c.

Move the *intrq variables into net/intrq.c and unconditionally
include this in all kernels. Declare some const *intrq_present
variables that can be checked by a module prior to using *intrq
to queue data.

Make the if_tun module capable of processing atm, ip, ip6, ipx,
natm and netatalk packets when TUNSIFHEAD is ioctl()d on.

Review not required by: freebsd-hackers

removed an ours case which think a packet destined to loopback interface
with IPv6 loopback addr for its dest or src addr as ours.

IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project

udp IPv6 support, IPv6/IPv4 tunneling support in kernel,
packet divert at kernel for IPv6/IPv4 translater daemon

This includes queue related patch submitted by jburkhol@home.com.

Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project

Removed IPSEC and IPV6FIREWALL because they are not ready yet.

KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP
for IPv6 yet)

With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project