MFC r264601,264646,265766,267918,267919,267920:

Merge if_nf10bmac(4), a driver to support an NetFPGA-10G Embedded
CPU Ethernet Core.

The current version operates on a simple PIO based interface connected
to a NetFPGA-10G port.

To avoid confusion: this driver operates on a CPU running on the FPGA,
e.g. BERI/mips, and is not suited for the PCI host interface.

Adjust the register layout to allow for 64bit registers in the
future for nf10bmac(4). Also, add support for and enable RX interrupts.

Allow switching between 32bit and 64bit bus width data access at compile
time by setting NF10BMAC_64BIT and using a REGWTYPE #define to set correct
variable and return value widths.

Adjust comments to indicate the 32 or 64bit register widths.

Relnotes: yes
Sponsored by: DARPA/AFRL

MFC r263632:

For BERI on NetFPGA assume HZ=100 by default.

Remove the uart support in favour of a "jtag-uart" interface imitation
providing a much simpler interface, directly exported to the host,
allowing the toolchain to be shared with BERI on Altera. [1]

Submitted by: Jong Hun HAN (jong.han cl.cam.ac.uk) [1]
Sponsored by: DARPA/AFRL

MFC 262614, 262625, 262626, 262627, 262682, 262714, 262725, 262736

Integrate device-tree upstream files into the build process:
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.

Only try to build the static dtb when we're building a static dtb.

Use proper include path for dtc as well as cpp.

Fix syntax errors (missing ; other minor glitches) in existing dts files.

MFC r264601,264646,265766,267918,267919,267920:

Merge if_nf10bmac(4), a driver to support an NetFPGA-10G Embedded
CPU Ethernet Core.

The current version operates on a simple PIO based interface connected
to a NetFPGA-10G port.

To avoid confusion: this driver operates on a CPU running on the FPGA,
e.g. BERI/mips, and is not suited for the PCI host interface.

Adjust the register layout to allow for 64bit registers in the
future for nf10bmac(4). Also, add support for and enable RX interrupts.

Allow switching between 32bit and 64bit bus width data access at compile
time by setting NF10BMAC_64BIT and using a REGWTYPE #define to set correct
variable and return value widths.

Adjust comments to indicate the 32 or 64bit register widths.

Relnotes: yes
Sponsored by: DARPA/AFRL

MFC r263632:

For BERI on NetFPGA assume HZ=100 by default.

Remove the uart support in favour of a "jtag-uart" interface imitation
providing a much simpler interface, directly exported to the host,
allowing the toolchain to be shared with BERI on Altera. [1]

Submitted by: Jong Hun HAN (jong.han cl.cam.ac.uk) [1]
Sponsored by: DARPA/AFRL

MFC 262614, 262625, 262626, 262627, 262682, 262714, 262725, 262736

Integrate device-tree upstream files into the build process:
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.

Only try to build the static dtb when we're building a static dtb.

Use proper include path for dtc as well as cpp.

Fix syntax errors (missing ; other minor glitches) in existing dts files.