1MIPS Malta board
2
3How to flash using a MIPS Navigator Probe:
4
5  - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will
6    be unable to flash your Malta using a Navigator Probe.
7
8  - Connect Navigator Console to your probe and Malta as usual.
9
10  - Within Navigator Console run the following commands:
11
12      source /path/to/u-boot/board/imgtec/malta/flash-malta-boot.tcl
13      reset
14      flash-boot /path/to/u-boot/u-boot.bin
15
16  - You should now be able to reboot your Malta to a U-Boot shell.
17