1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Novena SPL 4 * 5 * Copyright (C) 2014 Marek Vasut <marex@denx.de> 6 */ 7 8#include <common.h> 9#include <clock_legacy.h> 10#include <init.h> 11#include <asm/io.h> 12#include <asm/arch/clock.h> 13#include <asm/arch/iomux.h> 14#include <asm/arch/mx6-ddr.h> 15#include <asm/arch/mx6-pins.h> 16#include <asm/arch/sys_proto.h> 17#include <asm/gpio.h> 18#include <asm/mach-imx/boot_mode.h> 19#include <asm/mach-imx/iomux-v3.h> 20#include <asm/mach-imx/mxc_i2c.h> 21#include <asm/arch/crm_regs.h> 22#include <i2c.h> 23#include <mmc.h> 24#include <fsl_esdhc_imx.h> 25#include <spl.h> 26#include <linux/delay.h> 27 28#include <asm/arch/mx6-ddr.h> 29 30#include "novena.h" 31 32#define UART_PAD_CTRL \ 33 (PAD_CTL_PKE | PAD_CTL_PUE | \ 34 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 35 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 36 37#define USDHC_PAD_CTRL \ 38 (PAD_CTL_PKE | PAD_CTL_PUE | \ 39 PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ 40 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 41 42#define ENET_PAD_CTRL \ 43 (PAD_CTL_PKE | PAD_CTL_PUE | \ 44 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 45 PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 46 47#define ENET_PHY_CFG_PAD_CTRL \ 48 (PAD_CTL_PKE | PAD_CTL_PUE | \ 49 PAD_CTL_PUS_22K_UP | PAD_CTL_HYS) 50 51#define RGMII_PAD_CTRL \ 52 (PAD_CTL_PKE | PAD_CTL_PUE | \ 53 PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 54 55#define SPI_PAD_CTRL \ 56 (PAD_CTL_HYS | \ 57 PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ 58 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 59 60#define I2C_PAD_CTRL \ 61 (PAD_CTL_PKE | PAD_CTL_PUE | \ 62 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ 63 PAD_CTL_DSE_240ohm | PAD_CTL_HYS | \ 64 PAD_CTL_ODE) 65 66#define BUTTON_PAD_CTRL \ 67 (PAD_CTL_PKE | PAD_CTL_PUE | \ 68 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 69 PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 70 71#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) 72 73/* 74 * Audio 75 */ 76static iomux_v3_cfg_t audio_pads[] = { 77 /* AUD_PWRON */ 78 MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL), 79}; 80 81static void novena_spl_setup_iomux_audio(void) 82{ 83 imx_iomux_v3_setup_multiple_pads(audio_pads, ARRAY_SIZE(audio_pads)); 84 gpio_direction_output(NOVENA_AUDIO_PWRON, 1); 85} 86 87/* 88 * ENET 89 */ 90static iomux_v3_cfg_t enet_pads1[] = { 91 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 92 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 93 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(RGMII_PAD_CTRL), 94 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 95 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 96 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 97 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 98 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL), 99 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), 100 101 /* pin 35, PHY_AD2 */ 102 MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 103 /* pin 32, MODE0 */ 104 MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 105 /* pin 31, MODE1 */ 106 MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 107 /* pin 28, MODE2 */ 108 MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 109 /* pin 27, MODE3 */ 110 MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 111 /* pin 33, CLK125_EN */ 112 MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 113 114 /* pin 42 PHY nRST */ 115 MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL), 116}; 117 118static iomux_v3_cfg_t enet_pads2[] = { 119 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(RGMII_PAD_CTRL), 120 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 121 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 122 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 123 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 124 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL), 125}; 126 127static void novena_spl_setup_iomux_enet(void) 128{ 129 imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); 130 131 /* Assert Ethernet PHY nRST */ 132 gpio_direction_output(IMX_GPIO_NR(3, 23), 0); 133 134 /* 135 * Use imx6 internal pull-ups to drive PHY mode pins during PHY reset 136 * de-assertion. The intention is to use weak signal drivers (pull-ups) 137 * to prevent the conflict between PHY pins becoming outputs after 138 * reset and imx6 still driving the pins. The issue is described in PHY 139 * datasheet, p.14 140 */ 141 gpio_direction_input(IMX_GPIO_NR(6, 30)); /* PHY_AD2 = 1 */ 142 gpio_direction_input(IMX_GPIO_NR(6, 25)); /* MODE0 = 1 */ 143 gpio_direction_input(IMX_GPIO_NR(6, 27)); /* MODE1 = 1 */ 144 gpio_direction_input(IMX_GPIO_NR(6, 28)); /* MODE2 = 1 */ 145 gpio_direction_input(IMX_GPIO_NR(6, 29)); /* MODE3 = 1 */ 146 gpio_direction_input(IMX_GPIO_NR(6, 24)); /* CLK125_EN = 1 */ 147 148 /* Following reset timing (p.53, fig.8 from the PHY datasheet) */ 149 mdelay(10); 150 151 /* De-assert Ethernet PHY nRST */ 152 gpio_set_value(IMX_GPIO_NR(3, 23), 1); 153 154 /* PHY is now configured, connect FEC to the pads */ 155 imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); 156 157 /* 158 * PHY datasheet recommends on p.53 to wait at least 100us after reset 159 * before using MII, so we enforce the delay here 160 */ 161 udelay(100); 162} 163 164/* 165 * FPGA 166 */ 167static iomux_v3_cfg_t fpga_pads[] = { 168 /* FPGA_RESET_N */ 169 MX6_PAD_DISP0_DAT13__GPIO5_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL), 170}; 171 172static void novena_spl_setup_iomux_fpga(void) 173{ 174 imx_iomux_v3_setup_multiple_pads(fpga_pads, ARRAY_SIZE(fpga_pads)); 175 gpio_direction_output(NOVENA_FPGA_RESET_N_GPIO, 0); 176} 177 178/* 179 * GPIO Button 180 */ 181static iomux_v3_cfg_t button_pads[] = { 182 /* Debug */ 183 MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 184}; 185 186static void novena_spl_setup_iomux_buttons(void) 187{ 188 imx_iomux_v3_setup_multiple_pads(button_pads, ARRAY_SIZE(button_pads)); 189} 190 191/* 192 * I2C 193 */ 194/* 195 * I2C1: 196 * 0x1d ... MMA7455L 197 * 0x30 ... SO-DIMM temp sensor 198 * 0x44 ... STMPE610 199 * 0x50 ... SO-DIMM ID 200 */ 201struct i2c_pads_info i2c_pad_info0 = { 202 .scl = { 203 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, 204 .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC, 205 .gp = IMX_GPIO_NR(3, 21) 206 }, 207 .sda = { 208 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, 209 .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC, 210 .gp = IMX_GPIO_NR(3, 28) 211 } 212}; 213 214/* 215 * I2C2: 216 * 0x08 ... PMIC 217 * 0x3a ... HDMI DCC 218 * 0x50 ... HDMI DCC 219 */ 220static struct i2c_pads_info i2c_pad_info1 = { 221 .scl = { 222 .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, 223 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, 224 .gp = IMX_GPIO_NR(2, 30) 225 }, 226 .sda = { 227 .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC, 228 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, 229 .gp = IMX_GPIO_NR(3, 16) 230 } 231}; 232 233/* 234 * I2C3: 235 * 0x11 ... ES8283 236 * 0x50 ... LCD EDID 237 * 0x56 ... EEPROM 238 */ 239static struct i2c_pads_info i2c_pad_info2 = { 240 .scl = { 241 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, 242 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, 243 .gp = IMX_GPIO_NR(3, 17) 244 }, 245 .sda = { 246 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, 247 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, 248 .gp = IMX_GPIO_NR(3, 18) 249 } 250}; 251 252static void novena_spl_setup_iomux_i2c(void) 253{ 254 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); 255 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); 256 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); 257} 258 259/* 260 * PCI express 261 */ 262#ifdef CONFIG_CMD_PCI 263static iomux_v3_cfg_t pcie_pads[] = { 264 /* "Reset" pin */ 265 MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), 266 /* "Power on" pin */ 267 MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), 268 /* "Wake up" pin (input) */ 269 MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), 270 /* "Disable endpoint" (rfkill) pin */ 271 MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL), 272}; 273 274static void novena_spl_setup_iomux_pcie(void) 275{ 276 imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads)); 277 278 /* Ensure PCIe is powered down */ 279 gpio_direction_output(NOVENA_PCIE_POWER_ON_GPIO, 0); 280 281 /* Put the card into reset */ 282 gpio_direction_output(NOVENA_PCIE_RESET_GPIO, 0); 283 284 /* Input signal to wake system from mPCIe card */ 285 gpio_direction_input(NOVENA_PCIE_WAKE_UP_GPIO); 286 287 /* Drive RFKILL high, to ensure the radio is turned on */ 288 gpio_direction_output(NOVENA_PCIE_DISABLE_GPIO, 1); 289} 290#else 291static inline void novena_spl_setup_iomux_pcie(void) {} 292#endif 293 294/* 295 * SDHC 296 */ 297static iomux_v3_cfg_t usdhc2_pads[] = { 298 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 299 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 300 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 301 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 302 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 303 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 304 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */ 305 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 306}; 307 308static iomux_v3_cfg_t usdhc3_pads[] = { 309 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 310 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 311 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 312 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 313 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 314 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 315}; 316 317static void novena_spl_setup_iomux_sdhc(void) 318{ 319 imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); 320 imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 321 322 /* Big SD write-protect and card-detect */ 323 gpio_direction_input(IMX_GPIO_NR(1, 2)); 324 gpio_direction_input(IMX_GPIO_NR(1, 4)); 325} 326 327/* 328 * SPI 329 */ 330#ifdef CONFIG_MXC_SPI 331static iomux_v3_cfg_t ecspi3_pads[] = { 332 /* SS1 */ 333 MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), 334 MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), 335 MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), 336 MX6_PAD_DISP0_DAT3__GPIO4_IO24 | MUX_PAD_CTRL(SPI_PAD_CTRL), 337 MX6_PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(SPI_PAD_CTRL), 338 MX6_PAD_DISP0_DAT5__GPIO4_IO26 | MUX_PAD_CTRL(SPI_PAD_CTRL), 339 MX6_PAD_DISP0_DAT7__ECSPI3_RDY | MUX_PAD_CTRL(SPI_PAD_CTRL), 340}; 341 342static void novena_spl_setup_iomux_spi(void) 343{ 344 imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads)); 345 /* De-assert the nCS */ 346 gpio_direction_output(MX6_PAD_DISP0_DAT3__GPIO4_IO24, 1); 347 gpio_direction_output(MX6_PAD_DISP0_DAT4__GPIO4_IO25, 1); 348 gpio_direction_output(MX6_PAD_DISP0_DAT5__GPIO4_IO26, 1); 349} 350#else 351static void novena_spl_setup_iomux_spi(void) {} 352#endif 353 354/* 355 * UART 356 */ 357static iomux_v3_cfg_t const uart2_pads[] = { 358 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 359 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 360}; 361 362static iomux_v3_cfg_t const uart3_pads[] = { 363 MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 364 MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 365}; 366 367static iomux_v3_cfg_t const uart4_pads[] = { 368 MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 369 MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 370 MX6_PAD_CSI0_DAT16__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), 371 MX6_PAD_CSI0_DAT17__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), 372 373}; 374 375static void novena_spl_setup_iomux_uart(void) 376{ 377 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); 378 imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); 379 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); 380} 381 382static inline void novena_spl_setup_iomux_video(void) {} 383 384/* 385 * SPL boots from uSDHC card 386 */ 387#ifdef CONFIG_FSL_ESDHC_IMX 388static struct fsl_esdhc_cfg usdhc_cfg = { 389 USDHC3_BASE_ADDR, 0, 4 390}; 391 392int board_mmc_getcd(struct mmc *mmc) 393{ 394 /* There is no CD for a microSD card, assume always present. */ 395 return 1; 396} 397 398int board_mmc_init(struct bd_info *bis) 399{ 400 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 401 return fsl_esdhc_initialize(bis, &usdhc_cfg); 402} 403#endif 404 405/* Configure MX6Q/DUAL mmdc DDR io registers */ 406static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = { 407 /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ 408 .dram_sdclk_0 = 0x00020038, 409 .dram_sdclk_1 = 0x00020038, 410 .dram_cas = 0x00000038, 411 .dram_ras = 0x00000038, 412 .dram_reset = 0x00000038, 413 /* SDCKE[0:1]: 100k pull-up */ 414 .dram_sdcke0 = 0x00000038, 415 .dram_sdcke1 = 0x00000038, 416 /* SDBA2: pull-up disabled */ 417 .dram_sdba2 = 0x00000000, 418 /* SDODT[0:1]: 100k pull-up, 40 ohm */ 419 .dram_sdodt0 = 0x00000038, 420 .dram_sdodt1 = 0x00000038, 421 /* SDQS[0:7]: Differential input, 40 ohm */ 422 .dram_sdqs0 = 0x00000038, 423 .dram_sdqs1 = 0x00000038, 424 .dram_sdqs2 = 0x00000038, 425 .dram_sdqs3 = 0x00000038, 426 .dram_sdqs4 = 0x00000038, 427 .dram_sdqs5 = 0x00000038, 428 .dram_sdqs6 = 0x00000038, 429 .dram_sdqs7 = 0x00000038, 430 431 /* DQM[0:7]: Differential input, 40 ohm */ 432 .dram_dqm0 = 0x00000038, 433 .dram_dqm1 = 0x00000038, 434 .dram_dqm2 = 0x00000038, 435 .dram_dqm3 = 0x00000038, 436 .dram_dqm4 = 0x00000038, 437 .dram_dqm5 = 0x00000038, 438 .dram_dqm6 = 0x00000038, 439 .dram_dqm7 = 0x00000038, 440}; 441 442/* Configure MX6Q/DUAL mmdc GRP io registers */ 443static struct mx6dq_iomux_grp_regs novena_grp_ioregs = { 444 /* DDR3 */ 445 .grp_ddr_type = 0x000c0000, 446 .grp_ddrmode_ctl = 0x00020000, 447 /* Disable DDR pullups */ 448 .grp_ddrpke = 0x00000000, 449 /* ADDR[00:16], SDBA[0:1]: 40 ohm */ 450 .grp_addds = 0x00000038, 451 /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */ 452 .grp_ctlds = 0x00000038, 453 /* DATA[00:63]: Differential input, 40 ohm */ 454 .grp_ddrmode = 0x00020000, 455 .grp_b0ds = 0x00000038, 456 .grp_b1ds = 0x00000038, 457 .grp_b2ds = 0x00000038, 458 .grp_b3ds = 0x00000038, 459 .grp_b4ds = 0x00000038, 460 .grp_b5ds = 0x00000038, 461 .grp_b6ds = 0x00000038, 462 .grp_b7ds = 0x00000038, 463}; 464 465static struct mx6_mmdc_calibration novena_mmdc_calib = { 466 /* write leveling calibration determine */ 467 .p0_mpwldectrl0 = 0x00420048, 468 .p0_mpwldectrl1 = 0x006f0059, 469 .p1_mpwldectrl0 = 0x005a0104, 470 .p1_mpwldectrl1 = 0x01070113, 471 /* Read DQS Gating calibration */ 472 .p0_mpdgctrl0 = 0x437c040b, 473 .p0_mpdgctrl1 = 0x0413040e, 474 .p1_mpdgctrl0 = 0x444f0446, 475 .p1_mpdgctrl1 = 0x044d0422, 476 /* Read Calibration: DQS delay relative to DQ read access */ 477 .p0_mprddlctl = 0x4c424249, 478 .p1_mprddlctl = 0x4e48414f, 479 /* Write Calibration: DQ/DM delay relative to DQS write access */ 480 .p0_mpwrdlctl = 0x42414641, 481 .p1_mpwrdlctl = 0x46374b43, 482}; 483 484static struct mx6_ddr_sysinfo novena_ddr_info = { 485 /* Width of data bus: 0=16, 1=32, 2=64 */ 486 .dsize = 2, 487 /* Config for full 4GB range so that get_mem_size() works */ 488 .cs_density = 32, /* 32Gb per CS */ 489 /* Single chip select */ 490 .ncs = 1, 491 .cs1_mirror = 0, 492 .rtt_wr = 0, /* RTT_Wr = RZQ/4 */ 493 .rtt_nom = 1, /* RTT_Nom = RZQ/2 */ 494 .walat = 0, /* Write additional latency */ 495 .ralat = 5, /* Read additional latency */ 496 .mif3_mode = 3, /* Command prediction working mode */ 497 .bi_on = 1, /* Bank interleaving enabled */ 498 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ 499 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ 500 .refsel = 1, /* Refresh cycles at 32KHz */ 501 .refr = 7, /* 8 refresh commands per refresh cycle */ 502}; 503 504static struct mx6_ddr3_cfg elpida_4gib_1600 = { 505 .mem_speed = 1600, 506 .density = 4, 507 .width = 64, 508 .banks = 8, 509 .rowaddr = 16, 510 .coladdr = 10, 511 .pagesz = 2, 512 .trcd = 1375, 513 .trcmin = 4875, 514 .trasmin = 3500, 515}; 516 517static void ccgr_init(void) 518{ 519 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 520 521 writel(0x00C03F3F, &ccm->CCGR0); 522 writel(0x0030FC03, &ccm->CCGR1); 523 writel(0x0FFFC000, &ccm->CCGR2); 524 writel(0x3FF00000, &ccm->CCGR3); 525 writel(0xFFFFF300, &ccm->CCGR4); 526 writel(0x0F0000C3, &ccm->CCGR5); 527 writel(0x000003FF, &ccm->CCGR6); 528} 529 530/* 531 * called from C runtime startup code (arch/arm/lib/crt0.S:_main) 532 * - we have a stack and a place to store GD, both in SRAM 533 * - no variable global data is available 534 */ 535void board_init_f(ulong dummy) 536{ 537 /* setup AIPS and disable watchdog */ 538 arch_cpu_init(); 539 540 ccgr_init(); 541 gpr_init(); 542 543 /* setup GP timer */ 544 timer_init(); 545 546#ifdef CONFIG_BOARD_POSTCLK_INIT 547 board_postclk_init(); 548#endif 549#ifdef CONFIG_FSL_ESDHC_IMX 550 get_clocks(); 551#endif 552 553 /* Setup IOMUX and configure basics. */ 554 novena_spl_setup_iomux_audio(); 555 novena_spl_setup_iomux_buttons(); 556 novena_spl_setup_iomux_enet(); 557 novena_spl_setup_iomux_fpga(); 558 novena_spl_setup_iomux_i2c(); 559 novena_spl_setup_iomux_pcie(); 560 novena_spl_setup_iomux_sdhc(); 561 novena_spl_setup_iomux_spi(); 562 novena_spl_setup_iomux_uart(); 563 novena_spl_setup_iomux_video(); 564 565 /* UART clocks enabled and gd valid - init serial console */ 566 preloader_console_init(); 567 568 /* Start the DDR DRAM */ 569 mx6dq_dram_iocfg(64, &novena_ddr_ioregs, &novena_grp_ioregs); 570 mx6_dram_cfg(&novena_ddr_info, &novena_mmdc_calib, &elpida_4gib_1600); 571 572 /* Perform DDR DRAM calibration */ 573 udelay(100); 574 mmdc_do_write_level_calibration(&novena_ddr_info); 575 mmdc_do_dqs_calibration(&novena_ddr_info); 576} 577