1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21/* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ 22/* All Rights Reserved */ 23 24 25/* 26 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 27 * Use is subject to license terms. 28 */ 29 30#pragma ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.3 */ 31 32/* 33 * setuname [-t] [-s name] [-n node] 34 */ 35 36/* 37 * Header files referenced: 38 * <stdio.h> Standard I/O 39 * <unistd.h> Standard UNIX definitions 40 * <string.h> String handling 41 * <fmtmsg.h> Standard message generation 42 * <ctype.h> Character types 43 * <errno.h> Error handling 44 * <signal.h> Signal handling 45 * <sys/types.h> Data types 46 * <sys/fcntl.h> File control 47 * <sys/utsname.h> System Name 48 * <sys/sys3b.h> sys3b() definitions 49 * <nlist.h> Definitions for Sun symbol table entries 50 */ 51 52#include <stdio.h> 53#include <unistd.h> 54#include <string.h> 55#include <fmtmsg.h> 56#include <ctype.h> 57#include <errno.h> 58#include <signal.h> 59#include <sys/types.h> 60#include <sys/uio.h> 61#include <sys/fcntl.h> 62#include <sys/psw.h> 63#include <sys/utsname.h> 64 65#if u3b || u3b15 || u3b2 66#include <sys/sys3b.h> 67#endif 68 69#if sun 70#include <nlist.h> 71#include <kvm.h> 72#endif 73 74/* 75 * Externals referenced (and not defined in a header) 76 * optind index to the next arg for getopt() 77 * opterr FLAG, TRUE tells getopt() to write messages 78 * optarg Ptr to an option's argument 79 * getopt() Gets an option from the command line 80 * putenv() Writes values into the environment 81 * exit() Exit the process 82 * access() Check accessibility of a file 83 * malloc() Allocate a block of main memory 84 * free() Free allocated space 85 * lseek() Seek within a file 86 * open() Open a file 87 * close() Close an open file 88 */ 89 90extern int optind; /* argv[] index of next arg */ 91extern int opterr; /* TRUE if getopt() is to print msgs */ 92extern char *optarg; /* Argument to parsed option */ 93extern int getopt(); /* Get an option from the command line */ 94extern int putenv(); /* Put a value into the environment */ 95extern void exit(); /* Exit the process */ 96extern int access(); /* Check the accessibility of a file */ 97extern void *malloc(); /* Get a chunk of main memory */ 98extern void free(); /* Free alloc'd space */ 99extern long lseek(); /* Seek within a file */ 100extern int open(); /* Open a file */ 101extern int close(); /* Close an open a file */ 102 103/* 104 * L O C A L D E F I N I T I O N S 105 */ 106 107/* 108 * Constants 109 */ 110 111#ifndef TRUE 112#define TRUE (1) 113#endif 114 115#ifndef FALSE 116#define FALSE (0) 117#endif 118 119#ifndef NULL 120#define NULL (0) 121#endif 122 123#define OPTSTRING "tn:s:" 124 125#define EX_OK 0 126#define EX_ERROR 1 127 128#define RC_FILENAME "/etc/rc2.d/S18setuname" 129#define RC_DIRNAME "/etc/rc2.d" 130 131 132/* 133 * Messages 134 */ 135 136#define E_USAGE "usage: setuname [-t] [-s name] [-n node]" 137#define E_MISSING "Either -s name or -n node must be specified" 138#define E_UNAME "Unable to get existing uname values" 139#define E_INVNAME "System-name invalid: %s" 140#define E_LONGNAME "System-name too long: %s" 141#define E_INVNODE "Network node-name invalid: %s" 142#define E_LONGNODE "Network node-name too long: %s" 143#define E_NOPERMS "No permissions, request denied" 144#define E_NOSUCHDIR "Directory doesn't exist: %s" 145#define E_INTERNAL "Internal error: %d" 146 147/* 148 * Macros: 149 * stdmsg(r,l,s,t) Write a standard message. 150 * 'r' is the recoverability flag 151 * 'l' is the label 152 * 's' is the severity 153 * 't' is the text. 154 * strend(p) Return the address of the end of a string 155 * (This is supposed to be defined in <sys/inline.h> 156 * but that file has string-handing def'ns that 157 * conflict with <string.h>, so we can't use it! 158 * MR dn89-04701 requests this fix. 159 */ 160 161#define stdmsg(r,l,s,t) (void) fmtmsg(MM_PRINT|MM_UTIL|r,l,s,t,MM_NULLACT,MM_NULLTAG) 162#define strend(p) strrchr(p,'\0') 163 164/* 165 * Local functions: 166 * setuname Changes the system name and the network node name 167 */ 168 169static int setuname(); /* This does the "real" work */ 170 171 172/* 173 * Local data 174 * lbl Buffer for the standard message label 175 * txt Buffer for the standard message text 176 */ 177 178static char lbl[MM_MXLABELLN+1]; /* Space for std msg label */ 179static char msg[MM_MXTXTLN+1]; /* Space for std msg text */ 180 181/* 182 * int main(argc, argv) 183 * int argc 184 * char *argv; 185 */ 186 187int 188main(argc, argv) 189 int argc; /* Argument count */ 190 char *argv[]; /* Argument vector */ 191{ 192 /* Automatic data */ 193 char *n_arg; /* Ptr to arg for -n */ 194 char *s_arg; /* Ptr to arg for -s */ 195 int t_seen; /* FLAG, -t option seen */ 196 char *cmdname; /* Ptr to the command's name */ 197 char *p; /* Temp pointer */ 198 int usageerr; /* FLAG, TRUE if usage error */ 199 int exitcode; /* Value to exit with */ 200 int c; /* Temp character */ 201 int ok; /* Flag, everything okay? */ 202 203 /* Build the standard-message label */ 204 if (p = strrchr(argv[0], '/')) cmdname = p+1; 205 else cmdname = argv[0]; 206 (void) strcat(strcpy(lbl, "UX:"), cmdname); 207 208 /* Make only the text in standard messages appear (SVR4.0 only) */ 209 (void) putenv("MSGVERB=text"); 210 211 212 /* Initializations */ 213 n_arg = s_arg = (char *) NULL; 214 t_seen = FALSE; 215 216 217 /* 218 * Parse command 219 */ 220 221 usageerr = FALSE; 222 opterr = FALSE; 223 while (!usageerr && (c = getopt(argc, argv, OPTSTRING)) != EOF) switch(c) { 224 225 case 'n': /* -n node */ 226 if (n_arg) usageerr = TRUE; 227 else n_arg = optarg; 228 break; 229 230 case 's': /* -s name */ 231 if (s_arg) usageerr = TRUE; 232 else s_arg = optarg; 233 break; 234 235 case 't': /* -t */ 236 if (t_seen) usageerr = TRUE; 237 else t_seen = TRUE; 238 break; 239 240 default: /* Something that doesn't exist */ 241 usageerr = TRUE; 242 } /* switch() */ 243 244 /* If there was a usage error, report the error and exit */ 245 if ((argc >= (optind+1)) || usageerr) { 246 stdmsg(MM_NRECOV, lbl, MM_ERROR, E_USAGE); 247 exit(EX_ERROR); 248 } 249 250 /* Either -n <node> or -s <name> has to be specified */ 251 if (!(n_arg || s_arg)) { 252 stdmsg(MM_NRECOV, lbl, MM_ERROR, E_MISSING); 253 exit(EX_ERROR); 254 } 255 256 257 /* 258 * Validate arguments: 259 * - The length of the system name must be less than SYS_NMLN-1 260 * characters, 261 * - The length of the network node-name must be less than 262 * SYS_NMLN-1 characters, 263 * - The system name must equal [a-zA-Z0-9-_]+, 264 * - The network node-name must equal [a-zA-Z0-9-_]+. 265 */ 266 267 /* Check the length and the character-set of the system name */ 268 if (s_arg) { 269 270 /* Check length of the system name */ 271 if (strlen(s_arg) > (size_t)(SYS_NMLN-1)) { 272 (void) sprintf(msg, E_LONGNAME, s_arg); 273 stdmsg(MM_NRECOV, lbl, MM_ERROR, msg); 274 exit(EX_ERROR); 275 } 276 277 /* Check the character-set */ 278 ok = TRUE; 279 for (p = s_arg ; ok && *p ; p++) { 280 if (!isalnum(*p) && (*p != '-') && (*p != '_')) ok = FALSE; 281 } 282 if (!ok || (p == s_arg)) { 283 (void) sprintf(msg, E_INVNAME, s_arg); 284 stdmsg(MM_NRECOV, lbl, MM_ERROR, msg); 285 exit(EX_ERROR); 286 } 287 } 288 289 /* Check the length and the character-set of the network node-name */ 290 291 if (n_arg) { 292 293 /* Check length of the network node-name */ 294 if (strlen(n_arg) > (size_t)(SYS_NMLN-1)) { 295 (void) sprintf(msg, E_LONGNODE, n_arg); 296 stdmsg(MM_NRECOV, lbl, MM_ERROR, msg); 297 exit(EX_ERROR); 298 } 299 300 /* Check the character-set */ 301 ok = TRUE; 302 for (p = n_arg ; ok && *p ; p++) { 303 if (!isalnum(*p) && (*p != '-') && (*p != '_')) ok = FALSE; 304 } 305 if (!ok || (p == n_arg)) { 306 (void) sprintf(msg, E_INVNODE, n_arg); 307 stdmsg(MM_NRECOV, lbl, MM_ERROR, msg); 308 exit(EX_ERROR); 309 } 310 } 311 312 313 /* 314 * Make sure we have access to needed resources: 315 * - Read/write access to kernel memory (/dev/kmem) 316 * - If -t is not specified, read/write access to /etc/rc2.d 317 * - If -t is not specified, read access to /etc/rc2.d/S18setuname 318 */ 319 320 if (access("/dev/kmem", R_OK|W_OK) == 0) { 321 if (access(RC_DIRNAME, R_OK|W_OK) == 0) { 322 if ((access(RC_FILENAME, R_OK) != 0) && 323 (access(RC_FILENAME, F_OK) == 0)) { 324 stdmsg(MM_NRECOV, lbl, MM_ERROR, E_NOPERMS); 325 exit(EX_ERROR); 326 } 327 } 328 else { 329 if (access(RC_DIRNAME, F_OK) == 0) { 330 stdmsg(MM_NRECOV, lbl, MM_ERROR, E_NOPERMS); 331 exit(EX_ERROR); 332 } 333 else { 334 (void) sprintf(msg, E_NOSUCHDIR, RC_DIRNAME); 335 stdmsg(MM_NRECOV, lbl, MM_ERROR, msg); 336 exit(EX_ERROR); 337 } 338 } 339 } 340 else { 341 stdmsg(MM_NRECOV, lbl, MM_ERROR, E_NOPERMS); 342 exit(EX_ERROR); 343 } 344 345 346 /* Attempt the setuname */ 347 if (setuname(t_seen, s_arg, n_arg) == 0) exitcode = EX_OK; 348 else { 349 (void) sprintf(msg, E_INTERNAL, errno); 350 stdmsg(MM_NRECOV, lbl, MM_ERROR, msg); 351 exitcode = EX_ERROR; 352 } 353 354 /* Finished */ 355 return (exitcode); 356} /* main() */ 357 358/* 359 * int setuname(temp, name, node) 360 * int temp 361 * char *name 362 * char *node 363 * 364 * Set any or all of the following machine parameters, either 365 * temporarily or permanently, depending on <temp>. 366 * - System name 367 * - Network Node-name 368 */ 369 370static int 371setuname(temp, sysname, nodename) 372 int temp; /* Set in kernel only flag */ 373 char *sysname; /* System name */ 374 char *nodename; /* Network node-name */ 375{ 376 /* Automatic Data */ 377 struct utsname utsname; /* Space for the kernel's utsname information */ 378#if u3b || u3b15 || u3b2 379 struct s3bsym *symbtbl; /* The kernel's symbol table */ 380#endif 381#if sun 382 struct nlist nl[] = { 383 {"utsname", 0, 0, 0, 0, 0}, 384 {NULL} 385 }; 386 kvm_t *kd; 387#endif 388 uintptr_t utsname_addr; /* Addr of "utsname" in the kernel */ 389 char *sysnm = (char *)NULL; /* System name to set (from file or arg) */ 390 char *nodenm = (char *)NULL; /* Network node-name to set (from file or arg) */ 391 FILE *fd; /* Std I/O File Descriptor for /etc/rc2.d/S18setuname */ 392 char *p; /* Temp pointer */ 393 void (*oldsighup)(); /* Function to call for SIGHUP */ 394 void (*oldsigint)(); /* Function to call for SIGINT */ 395 int rtncd; /* Value to return to the caller */ 396 unsigned long symbtblsz; /* The size of the kernel's symbol table, in bytes */ 397 int memfd; /* File descriptor: open kernel memory */ 398 int i; /* Temp counter */ 399 400 401 /* Nothing's gone wrong yet (but we've only just begun!) */ 402 rtncd = 0; 403 404 405 /* 406 * Get the virtual address of the symbol "utsname" in the kernel 407 * so we can get set the system name and/or the network node-name 408 * directly in the kernel's memory space. 409 */ 410 411#if u3b || u3b15 || u3b2 412 if ((sys3b(S3BSYM, (struct s3bsym *) &symbtblsz, sizeof(symbtblsz)) == 0) && 413 (symbtbl = (struct s3bsym *) malloc(symbtblsz))) { 414 415 (void) sys3b(S3BSYM, symbtbl, symbtblsz); 416 p = (char *) symbtbl; 417 for (i = symbtbl->count; i-- && (strcmp(p, "utsname") != 0) ; p = S3BNXTSYM(p)) ; 418 if (i >= 0) utsname_addr = S3BSVAL(p); 419 else rtncd = -1; 420 free((void *) symbtbl); 421 422 } else rtncd = -1; 423 424#elif sun 425 /* Check out namelist and memory files. */ 426 if ((kd = kvm_open(NULL, NULL, NULL, O_RDWR, NULL)) == NULL) 427 rtncd = -1; 428 else if (kvm_nlist(kd, nl) != 0) 429 rtncd = -1; 430 else if (nl[0].n_value == 0) 431 rtncd = -1; 432 else 433 utsname_addr = (uintptr_t)nl[0].n_value; 434#else 435 if (nlist("/unix", nl) != 0) 436 rtncd = -1; 437#endif 438 if (rtncd != 0) return(rtncd); 439 440 /* 441 * Open the kernel's memory, get the existing "utsname" structure, 442 * change the system name and/or the network node-name in that struct, 443 * write it back out to kernel memory, then close kernel memory. 444 */ 445#ifdef sun 446 if (kvm_kread(kd, utsname_addr, &utsname, sizeof (utsname)) == 447 sizeof (utsname)) { 448 if (sysname) 449 (void) strncpy(utsname.sysname, sysname, 450 sizeof (utsname.sysname)); 451 if (nodename) 452 (void) strncpy(utsname.nodename, nodename, 453 sizeof (utsname.nodename)); 454 (void) kvm_kwrite(kd, utsname_addr, &utsname, sizeof (utsname)); 455 kvm_close(kd); 456 } else 457 return (-1); 458#else /* sun */ 459 if ((memfd = open("/dev/kmem", O_RDWR, 0)) > 0) { 460 if ((lseek(memfd, (long) utsname_addr, SEEK_SET) != -1) && 461 (read(memfd, &utsname, sizeof(utsname)) == sizeof(utsname))) { 462 if (sysname) (void) strncpy(utsname.sysname, sysname, sizeof(utsname.sysname)); 463 if (nodename) (void) strncpy(utsname.nodename, nodename, sizeof(utsname.nodename)); 464 (void) lseek(memfd, (long) utsname_addr, SEEK_SET); 465 (void) write(memfd, &utsname, sizeof(utsname)); 466 (void) close(memfd); 467 } else rtncd = -1; 468 } else rtncd = -1; 469 if (rtncd != 0) return(rtncd); 470#endif /* sun */ 471 472 473 /* 474 * If the "temp" flag is FALSE, we need to permanently set the 475 * system name in the file /etc/rc2.d/S18setuname 476 */ 477 478 if (!temp) { 479 /* 480 * If a name was specified by the caller, use that, otherwise, use 481 * whatever was in the "rc" file. 482 */ 483 484 if (sysname) sysnm = sysname; 485 if (nodename) nodenm = nodename; 486 487 488 /* 489 * Write the file /etc/rc2.d/S18setuname so that the system name is 490 * set on boots and state changes. 491 * 492 * DISABLED SIGNALS: SIGHUP, SIGINT 493 */ 494 495 /* Give us a reasonable chance to complete without interruptions */ 496 oldsighup = signal(SIGHUP, SIG_IGN); 497 oldsigint = signal(SIGINT, SIG_IGN); 498 499 /* Write the new setuname "rc" file */ 500 if (sysname != NULL) { 501 if ((fd = fopen(RC_FILENAME, "w")) != (FILE *) NULL) { 502 (void) fprintf(fd, "# %s\n", sysnm); 503 (void) fprintf(fd, "#\n"); 504 (void) fprintf(fd, "# This script, generated by the setuname command,\n"); 505 (void) fprintf(fd, "# sets the system's system-name\n"); 506 (void) fprintf(fd, "#\n"); 507 if (sysnm && *sysnm) 508 (void) fprintf(fd, "setuname -t -s %s\n", sysnm); 509 (void) fclose(fd); 510 } else return(rtncd = -1); 511 } 512 513 if(nodename != NULL) { 514 char curname[SYS_NMLN]; 515 int curlen; 516 FILE *file; 517 518 if ((file = fopen("/etc/nodename", "r")) != NULL) { 519 curlen = fread(curname, sizeof(char), SYS_NMLN, file); 520 for (i = 0; i < curlen; i++) { 521 if (curname[i] == '\n') { 522 curname[i] = '\0'; 523 break; 524 } 525 } 526 if (i == curlen) { 527 curname[curlen] = '\0'; 528 } 529 (void)fclose(file); 530 } else { 531 curname[0] = '\0'; 532 } 533 if (strcmp(curname, nodenm) != 0) { 534 if ((file = fopen("/etc/nodename", "w")) == NULL) { 535 (void) fprintf(stderr, "setuname: error in writing name\n"); 536 exit(1); 537 } 538 if (fprintf(file, "%s\n", nodenm) < 0) { 539 (void) fprintf(stderr, "setuname: error in writing name\n"); 540 exit(1); 541 } 542 (void)fclose(file); 543 } 544 } 545 /* Restore signal handling */ 546 (void) signal(SIGHUP, oldsighup); 547 (void) signal(SIGINT, oldsigint); 548 } /* if (!temp) */ 549 550 /* Fini */ 551 return(rtncd); 552} 553