1/* $OpenBSD: if_ether.h,v 1.92 2024/02/14 22:41:48 bluhm Exp $ */ 2/* $NetBSD: if_ether.h,v 1.22 1996/05/11 13:00:00 mycroft Exp $ */ 3 4/* 5 * Copyright (c) 1982, 1986, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the name of the University nor the names of its contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * @(#)if_ether.h 8.1 (Berkeley) 6/10/93 33 */ 34 35#ifndef _NETINET_IF_ETHER_H_ 36#define _NETINET_IF_ETHER_H_ 37 38/* 39 * Some basic Ethernet constants. 40 */ 41#define ETHER_ADDR_LEN 6 /* Ethernet address length */ 42#define ETHER_TYPE_LEN 2 /* Ethernet type field length */ 43#define ETHER_CRC_LEN 4 /* Ethernet CRC length */ 44#define ETHER_HDR_LEN ((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN) 45#define ETHER_MIN_LEN 64 /* Minimum frame length, CRC included */ 46#define ETHER_MAX_LEN 1518 /* Maximum frame length, CRC included */ 47#define ETHER_MAX_DIX_LEN 1536 /* Maximum DIX frame length */ 48 49/* 50 * Some Ethernet extensions. 51 */ 52#define ETHER_VLAN_ENCAP_LEN 4 /* len of 802.1Q VLAN encapsulation */ 53 54/* 55 * Mbuf adjust factor to force 32-bit alignment of IP header. 56 * Drivers should do m_adj(m, ETHER_ALIGN) when setting up a 57 * receive so the upper layers get the IP header properly aligned 58 * past the 14-byte Ethernet header. 59 */ 60#define ETHER_ALIGN 2 /* driver adjust for IP hdr alignment */ 61 62/* 63 * The maximum supported Ethernet length and some space for encapsulation. 64 */ 65#define ETHER_MAX_HARDMTU_LEN 65435 66 67/* 68 * Ethernet address - 6 octets 69 */ 70struct ether_addr { 71 u_int8_t ether_addr_octet[ETHER_ADDR_LEN]; 72}; 73 74/* 75 * The length of the combined header. 76 */ 77struct ether_header { 78 u_int8_t ether_dhost[ETHER_ADDR_LEN]; 79 u_int8_t ether_shost[ETHER_ADDR_LEN]; 80 u_int16_t ether_type; 81}; 82 83/* 84 * VLAN headers. 85 */ 86 87struct ether_vlan_header { 88 u_char evl_dhost[ETHER_ADDR_LEN]; 89 u_char evl_shost[ETHER_ADDR_LEN]; 90 u_int16_t evl_encap_proto; 91 u_int16_t evl_tag; 92 u_int16_t evl_proto; 93}; 94 95#define EVL_VLID_MASK 0xFFF 96#define EVL_VLID_NULL 0x000 97/* 0x000 and 0xfff are reserved */ 98#define EVL_VLID_MIN 0x001 99#define EVL_VLID_MAX 0xFFE 100#define EVL_VLANOFTAG(tag) ((tag) & EVL_VLID_MASK) 101 102#define EVL_PRIO_MAX 7 103#define EVL_PRIO_BITS 13 104#define EVL_PRIOFTAG(tag) (((tag) >> EVL_PRIO_BITS) & 7) 105 106#define EVL_ENCAPLEN 4 /* length in octets of encapsulation */ 107 108#include <net/ethertypes.h> 109 110#define ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */ 111#define ETHER_IS_BROADCAST(addr) \ 112 (((addr)[0] & (addr)[1] & (addr)[2] & \ 113 (addr)[3] & (addr)[4] & (addr)[5]) == 0xff) 114#define ETHER_IS_ANYADDR(addr) \ 115 (((addr)[0] | (addr)[1] | (addr)[2] | \ 116 (addr)[3] | (addr)[4] | (addr)[5]) == 0x00) 117#define ETHER_IS_EQ(a1, a2) (memcmp((a1), (a2), ETHER_ADDR_LEN) == 0) 118 119/* 120 * It can be faster to work with ethernet addresses as a uint64_t. 121 * Provide some constants and functionality centrally to better 122 * support this. 123 */ 124 125#define ETH64_IS_MULTICAST(_e64) ((_e64) & 0x010000000000ULL) 126#define ETH64_IS_BROADCAST(_e64) ((_e64) == 0xffffffffffffULL) 127#define ETH64_IS_ANYADDR(_e64) ((_e64) == 0x000000000000ULL) 128 129#define ETH64_8021_RSVD_PREFIX 0x0180c2000000ULL 130#define ETH64_8021_RSVD_MASK 0xfffffffffff0ULL 131#define ETH64_IS_8021_RSVD(_e64) \ 132 (((_e64) & ETH64_8021_RSVD_MASK) == ETH64_8021_RSVD_PREFIX) 133 134/* 135 * Ethernet MTU constants. 136 */ 137#define ETHERMTU (ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) 138#define ETHERMIN (ETHER_MIN_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) 139 140/* 141 * Ethernet CRC32 polynomials (big- and little-endian versions). 142 */ 143#define ETHER_CRC_POLY_LE 0xedb88320 144#define ETHER_CRC_POLY_BE 0x04c11db6 145 146/* 147 * Ethernet Address Resolution Protocol. 148 * 149 * See RFC 826 for protocol description. Structure below is adapted 150 * to resolving internet addresses. Field names used correspond to 151 * RFC 826. 152 */ 153struct ether_arp { 154 struct arphdr ea_hdr; /* fixed-size header */ 155 u_int8_t arp_sha[ETHER_ADDR_LEN]; /* sender hardware address */ 156 u_int8_t arp_spa[4]; /* sender protocol address */ 157 u_int8_t arp_tha[ETHER_ADDR_LEN]; /* target hardware address */ 158 u_int8_t arp_tpa[4]; /* target protocol address */ 159}; 160#define arp_hrd ea_hdr.ar_hrd 161#define arp_pro ea_hdr.ar_pro 162#define arp_hln ea_hdr.ar_hln 163#define arp_pln ea_hdr.ar_pln 164#define arp_op ea_hdr.ar_op 165 166struct sockaddr_inarp { 167 u_int8_t sin_len; 168 u_int8_t sin_family; 169 u_int16_t sin_port; 170 struct in_addr sin_addr; 171 struct in_addr sin_srcaddr; 172 u_int16_t sin_tos; 173 u_int16_t sin_other; 174#define SIN_PROXY 1 175}; 176 177/* 178 * IP and ethernet specific routing flags 179 */ 180#define RTF_USETRAILERS RTF_PROTO1 /* use trailers */ 181#define RTF_PERMANENT_ARP RTF_PROTO3 /* only manual overwrite of entry */ 182 183#ifdef _KERNEL 184 185#include <sys/refcnt.h> 186 187/* 188 * Macro to map an IP multicast address to an Ethernet multicast address. 189 * The high-order 25 bits of the Ethernet address are statically assigned, 190 * and the low-order 23 bits are taken from the low end of the IP address. 191 */ 192#define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr) \ 193 /* struct in_addr *ipaddr; */ \ 194 /* u_int8_t enaddr[ETHER_ADDR_LEN]; */ \ 195do { \ 196 (enaddr)[0] = 0x01; \ 197 (enaddr)[1] = 0x00; \ 198 (enaddr)[2] = 0x5e; \ 199 (enaddr)[3] = ((u_int8_t *)ipaddr)[1] & 0x7f; \ 200 (enaddr)[4] = ((u_int8_t *)ipaddr)[2]; \ 201 (enaddr)[5] = ((u_int8_t *)ipaddr)[3]; \ 202} while (/* CONSTCOND */ 0) 203 204/* 205 * Macro to map an IPv6 multicast address to an Ethernet multicast address. 206 * The high-order 16 bits of the Ethernet address are statically assigned, 207 * and the low-order 32 bits are taken from the low end of the IPv6 address. 208 */ 209#define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr) \ 210 /* struct in6_addr *ip6addr; */ \ 211 /* u_int8_t enaddr[ETHER_ADDR_LEN]; */ \ 212do { \ 213 (enaddr)[0] = 0x33; \ 214 (enaddr)[1] = 0x33; \ 215 (enaddr)[2] = ((u_int8_t *)ip6addr)[12]; \ 216 (enaddr)[3] = ((u_int8_t *)ip6addr)[13]; \ 217 (enaddr)[4] = ((u_int8_t *)ip6addr)[14]; \ 218 (enaddr)[5] = ((u_int8_t *)ip6addr)[15]; \ 219} while (/* CONSTCOND */ 0) 220 221#include <net/if_var.h> /* for "struct ifnet" */ 222 223struct ether_brport { 224 struct mbuf *(*eb_input)(struct ifnet *, struct mbuf *, 225 uint64_t, void *); 226 void (*eb_port_take)(void *); 227 void (*eb_port_rele)(void *); 228 void *eb_port; 229}; 230 231/* 232 * Structure shared between the ethernet driver modules and 233 * the address resolution code. For example, each ec_softc or il_softc 234 * begins with this structure. 235 */ 236struct arpcom { 237 struct ifnet ac_if; /* network-visible interface */ 238 u_int8_t ac_enaddr[ETHER_ADDR_LEN]; /* ethernet hardware address */ 239 char ac__pad[2]; /* pad for some machines */ 240 LIST_HEAD(, ether_multi) ac_multiaddrs; /* list of multicast addrs */ 241 int ac_multicnt; /* length of ac_multiaddrs */ 242 int ac_multirangecnt; /* number of mcast ranges */ 243 244 void *ac_trunkport; 245 const struct ether_brport *ac_brport; 246}; 247 248extern int arpt_keep; /* arp resolved cache expire */ 249extern int arpt_down; /* arp down cache expire */ 250 251extern u_int8_t etherbroadcastaddr[ETHER_ADDR_LEN]; 252extern u_int8_t etheranyaddr[ETHER_ADDR_LEN]; 253extern u_int8_t ether_ipmulticast_min[ETHER_ADDR_LEN]; 254extern u_int8_t ether_ipmulticast_max[ETHER_ADDR_LEN]; 255 256#ifdef NFSCLIENT 257extern unsigned int revarp_ifidx; 258#endif /* NFSCLIENT */ 259 260void revarpinput(struct ifnet *, struct mbuf *); 261void revarprequest(struct ifnet *); 262int revarpwhoarewe(struct ifnet *, struct in_addr *, struct in_addr *); 263int revarpwhoami(struct in_addr *, struct ifnet *); 264 265void arpinit(void); 266void arpinput(struct ifnet *, struct mbuf *); 267void arprequest(struct ifnet *, u_int32_t *, u_int32_t *, u_int8_t *); 268void arpwhohas(struct arpcom *, struct in_addr *); 269int arpproxy(struct in_addr, unsigned int); 270int arpresolve(struct ifnet *, struct rtentry *, struct mbuf *, 271 struct sockaddr *, u_char *); 272void arp_rtrequest(struct ifnet *, int, struct rtentry *); 273 274void ether_fakeaddr(struct ifnet *); 275int ether_addmulti(struct ifreq *, struct arpcom *); 276int ether_delmulti(struct ifreq *, struct arpcom *); 277int ether_multiaddr(struct sockaddr *, u_int8_t *, u_int8_t *); 278void ether_ifattach(struct ifnet *); 279void ether_ifdetach(struct ifnet *); 280int ether_ioctl(struct ifnet *, struct arpcom *, u_long, caddr_t); 281void ether_input(struct ifnet *, struct mbuf *); 282int ether_resolve(struct ifnet *, struct mbuf *, struct sockaddr *, 283 struct rtentry *, struct ether_header *); 284struct mbuf * 285 ether_encap(struct ifnet *, struct mbuf *, struct sockaddr *, 286 struct rtentry *, int *); 287int ether_output(struct ifnet *, struct mbuf *, struct sockaddr *, 288 struct rtentry *); 289void ether_rtrequest(struct ifnet *, int, struct rtentry *); 290char *ether_sprintf(u_char *); 291 292int ether_brport_isset(struct ifnet *); 293void ether_brport_set(struct ifnet *, const struct ether_brport *); 294void ether_brport_clr(struct ifnet *); 295const struct ether_brport * 296 ether_brport_get(struct ifnet *); 297const struct ether_brport * 298 ether_brport_get_locked(struct ifnet *); 299 300uint64_t ether_addr_to_e64(const struct ether_addr *); 301void ether_e64_to_addr(struct ether_addr *, uint64_t); 302 303struct ether_extracted { 304 struct ether_header *eh; 305 struct ether_vlan_header *evh; 306 struct ip *ip4; 307 struct ip6_hdr *ip6; 308 struct tcphdr *tcp; 309 struct udphdr *udp; 310 u_int iplen; 311 u_int iphlen; 312 u_int tcphlen; 313 u_int paylen; 314}; 315 316void ether_extract_headers(struct mbuf *, struct ether_extracted *); 317 318/* 319 * Ethernet multicast address structure. There is one of these for each 320 * multicast address or range of multicast addresses that we are supposed 321 * to listen to on a particular interface. They are kept in a linked list, 322 * rooted in the interface's arpcom structure. (This really has nothing to 323 * do with ARP, or with the Internet address family, but this appears to be 324 * the minimally-disrupting place to put it.) 325 */ 326struct ether_multi { 327 u_int8_t enm_addrlo[ETHER_ADDR_LEN]; /* low or only address of range */ 328 u_int8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */ 329 struct refcnt enm_refcnt; /* no. claims to this addr/range */ 330 LIST_ENTRY(ether_multi) enm_list; 331}; 332 333/* 334 * Structure used by macros below to remember position when stepping through 335 * all of the ether_multi records. 336 */ 337struct ether_multistep { 338 struct ether_multi *e_enm; 339}; 340 341/* 342 * Macro for looking up the ether_multi record for a given range of Ethernet 343 * multicast addresses connected to a given arpcom structure. If no matching 344 * record is found, "enm" returns NULL. 345 */ 346#define ETHER_LOOKUP_MULTI(addrlo, addrhi, ac, enm) \ 347 /* u_int8_t addrlo[ETHER_ADDR_LEN]; */ \ 348 /* u_int8_t addrhi[ETHER_ADDR_LEN]; */ \ 349 /* struct arpcom *ac; */ \ 350 /* struct ether_multi *enm; */ \ 351do { \ 352 for ((enm) = LIST_FIRST(&(ac)->ac_multiaddrs); \ 353 (enm) != NULL && \ 354 (memcmp((enm)->enm_addrlo, (addrlo), ETHER_ADDR_LEN) != 0 ||\ 355 memcmp((enm)->enm_addrhi, (addrhi), ETHER_ADDR_LEN) != 0); \ 356 (enm) = LIST_NEXT((enm), enm_list)); \ 357} while (/* CONSTCOND */ 0) 358 359/* 360 * Macro to step through all of the ether_multi records, one at a time. 361 * The current position is remembered in "step", which the caller must 362 * provide. ETHER_FIRST_MULTI(), below, must be called to initialize "step" 363 * and get the first record. Both macros return a NULL "enm" when there 364 * are no remaining records. 365 */ 366#define ETHER_NEXT_MULTI(step, enm) \ 367 /* struct ether_multistep step; */ \ 368 /* struct ether_multi *enm; */ \ 369do { \ 370 if (((enm) = (step).e_enm) != NULL) \ 371 (step).e_enm = LIST_NEXT((enm), enm_list); \ 372} while (/* CONSTCOND */ 0) 373 374#define ETHER_FIRST_MULTI(step, ac, enm) \ 375 /* struct ether_multistep step; */ \ 376 /* struct arpcom *ac; */ \ 377 /* struct ether_multi *enm; */ \ 378do { \ 379 (step).e_enm = LIST_FIRST(&(ac)->ac_multiaddrs); \ 380 ETHER_NEXT_MULTI((step), (enm)); \ 381} while (/* CONSTCOND */ 0) 382 383u_int32_t ether_crc32_le_update(u_int32_t crc, const u_int8_t *, size_t); 384u_int32_t ether_crc32_be_update(u_int32_t crc, const u_int8_t *, size_t); 385u_int32_t ether_crc32_le(const u_int8_t *, size_t); 386u_int32_t ether_crc32_be(const u_int8_t *, size_t); 387 388#else /* _KERNEL */ 389 390__BEGIN_DECLS 391char *ether_ntoa(struct ether_addr *); 392struct ether_addr *ether_aton(const char *); 393int ether_ntohost(char *, struct ether_addr *); 394int ether_hostton(const char *, struct ether_addr *); 395int ether_line(const char *, struct ether_addr *, char *); 396__END_DECLS 397 398#endif /* _KERNEL */ 399#endif /* _NETINET_IF_ETHER_H_ */ 400