if_em.h revision 1.5
1/************************************************************************** 2 3Copyright (c) 2001-2003, Intel Corporation 4All rights reserved. 5 6Redistribution and use in source and binary forms, with or without 7modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30POSSIBILITY OF SUCH DAMAGE. 31 32***************************************************************************/ 33 34/*$FreeBSD: if_em.h,v 1.24 2003/11/14 18:02:24 pdeuskar Exp $*/ 35/* $OpenBSD: if_em.h,v 1.5 2004/04/26 17:17:15 deraadt Exp $ */ 36 37#ifndef _EM_H_DEFINED_ 38#define _EM_H_DEFINED_ 39 40#include <dev/pci/if_em_hw.h> 41 42/* Tunables */ 43 44/* 45 * EM_MAX_TXD: Maximum number of Transmit Descriptors 46 * Valid Range: 80-256 for 82542 and 82543-based adapters 47 * 80-4096 for others 48 * Default Value: 256 49 * This value is the number of transmit descriptors allocated by the driver. 50 * Increasing this value allows the driver to queue more transmits. Each 51 * descriptor is 16 bytes. 52 */ 53#define EM_MIN_TXD 12 54#define EM_MAX_TXD 256 55 56/* 57 * EM_MAX_RXD - Maximum number of receive Descriptors 58 * Valid Range: 80-256 for 82542 and 82543-based adapters 59 * 80-4096 for others 60 * Default Value: 256 61 * This value is the number of receive descriptors allocated by the driver. 62 * Increasing this value allows the driver to buffer more incoming packets. 63 * Each descriptor is 16 bytes. A receive buffer is also allocated for each 64 * descriptor. The maximum MTU size is 16110. 65 * 66 */ 67#define EM_MIN_RXD 12 68#define EM_MAX_RXD 256 69 70/* 71 * EM_TIDV - Transmit Interrupt Delay Value 72 * Valid Range: 0-65535 (0=off) 73 * Default Value: 64 74 * This value delays the generation of transmit interrupts in units of 75 * 1.024 microseconds. Transmit interrupt reduction can improve CPU 76 * efficiency if properly tuned for specific network traffic. If the 77 * system is reporting dropped transmits, this value may be set too high 78 * causing the driver to run out of available transmit descriptors. 79 */ 80#define EM_TIDV 64 81 82/* 83 * EM_TADV - Transmit Absolute Interrupt Delay Value (Not valid for 82542/82543/82544) 84 * Valid Range: 0-65535 (0=off) 85 * Default Value: 64 86 * This value, in units of 1.024 microseconds, limits the delay in which a 87 * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, 88 * this value ensures that an interrupt is generated after the initial 89 * packet is sent on the wire within the set amount of time. Proper tuning, 90 * along with EM_TIDV, may improve traffic throughput in specific 91 * network conditions. 92 */ 93#define EM_TADV 64 94 95/* 96 * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) 97 * Valid Range: 0-65535 (0=off) 98 * Default Value: 0 99 * This value delays the generation of receive interrupts in units of 1.024 100 * microseconds. Receive interrupt reduction can improve CPU efficiency if 101 * properly tuned for specific network traffic. Increasing this value adds 102 * extra latency to frame reception and can end up decreasing the throughput 103 * of TCP traffic. If the system is reporting dropped receives, this value 104 * may be set too high, causing the driver to run out of available receive 105 * descriptors. 106 * 107 * CAUTION: When setting EM_RDTR to a value other than 0, adapters 108 * may hang (stop transmitting) under certain network conditions. 109 * If this occurs a WATCHDOG message is logged in the system event log. 110 * In addition, the controller is automatically reset, restoring the 111 * network connection. To eliminate the potential for the hang 112 * ensure that EM_RDTR is set to 0. 113 */ 114#define EM_RDTR 0 115 116/* 117 * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) 118 * Valid Range: 0-65535 (0=off) 119 * Default Value: 64 120 * This value, in units of 1.024 microseconds, limits the delay in which a 121 * receive interrupt is generated. Useful only if EM_RDTR is non-zero, 122 * this value ensures that an interrupt is generated after the initial 123 * packet is received within the set amount of time. Proper tuning, 124 * along with EM_RDTR, may improve traffic throughput in specific network 125 * conditions. 126 */ 127#define EM_RADV 64 128 129 130/* 131 * This parameter controls the maximum no of times the driver will loop 132 * in the isr. 133 * Minimum Value = 1 134 */ 135#define EM_MAX_INTR 3 136 137/* 138 * Inform the stack about transmit checksum offload capabilities. 139 */ 140#define EM_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP) 141 142/* 143 * This parameter controls the duration of transmit watchdog timer. 144 */ 145#define EM_TX_TIMEOUT 5 /* set to 5 seconds */ 146 147/* 148 * This parameter controls when the driver calls the routine to reclaim 149 * transmit descriptors. 150 */ 151#define EM_TX_CLEANUP_THRESHOLD EM_MAX_TXD / 8 152 153/* 154 * This parameter controls whether or not autonegotation is enabled. 155 * 0 - Disable autonegotiation 156 * 1 - Enable autonegotiation 157 */ 158#define DO_AUTO_NEG 1 159 160/* 161 * This parameter control whether or not the driver will wait for 162 * autonegotiation to complete. 163 * 1 - Wait for autonegotiation to complete 164 * 0 - Don't wait for autonegotiation to complete 165 */ 166#define WAIT_FOR_AUTO_NEG_DEFAULT 0 167 168/* 169 * EM_MASTER_SLAVE is only defined to enable a workaround for a known compatibility issue 170 * with 82541/82547 devices and some switches. See the "Known Limitations" section of 171 * the README file for a complete description and a list of affected switches. 172 * 173 * 0 = Hardware default 174 * 1 = Master mode 175 * 2 = Slave mode 176 * 3 = Auto master/slave 177 */ 178/* #define EM_MASTER_SLAVE 2 */ 179 180/* Tunables -- End */ 181 182#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ 183 ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ 184 ADVERTISE_1000_FULL) 185 186#define EM_VENDOR_ID 0x8086 187#define EM_MMBA 0x0010 /* Mem base address */ 188#define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1)) 189 190#define EM_JUMBO_PBA 0x00000028 191#define EM_DEFAULT_PBA 0x00000030 192#define EM_SMARTSPEED_DOWNSHIFT 3 193#define EM_SMARTSPEED_MAX 15 194 195 196#define MAX_NUM_MULTICAST_ADDRESSES 128 197#define PCI_ANY_ID (~0U) 198#define ETHER_ALIGN 2 199 200/* Defines for printing debug information */ 201#define DEBUG_INIT 0 202#define DEBUG_IOCTL 0 203#define DEBUG_HW 0 204 205#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") 206#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) 207#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) 208#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") 209#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) 210#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) 211#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") 212#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) 213#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) 214 215 216/* Supported RX Buffer Sizes */ 217#define EM_RXBUFFER_2048 2048 218#define EM_RXBUFFER_4096 4096 219#define EM_RXBUFFER_8192 8192 220#define EM_RXBUFFER_16384 16384 221 222#define EM_MAX_SCATTER 64 223 224/* ****************************************************************************** 225 * vendor_info_array 226 * 227 * This array contains the list of Subvendor/Subdevice IDs on which the driver 228 * should load. 229 * 230 * ******************************************************************************/ 231#ifdef __FreeBSD__ 232typedef struct _em_vendor_info_t { 233 unsigned int vendor_id; 234 unsigned int device_id; 235 unsigned int subvendor_id; 236 unsigned int subdevice_id; 237 unsigned int index; 238} em_vendor_info_t; 239#endif /* __FreeBSD__ */ 240 241 242struct em_buffer { 243 struct mbuf *m_head; 244 bus_dmamap_t map; /* bus_dma map for packet */ 245}; 246 247struct em_q { 248 bus_dmamap_t map; /* bus_dma map for packet */ 249#ifdef __FreeBSD__ 250 int nsegs; /* # of segments/descriptors */ 251 bus_dma_segment_t segs[EM_MAX_SCATTER]; 252#endif /* __FreeBSD__ */ 253}; 254 255/* 256 * Bus dma allocation structure used by 257 * em_dma_malloc and em_dma_free. 258 */ 259struct em_dma_alloc { 260 bus_addr_t dma_paddr; 261 caddr_t dma_vaddr; 262 bus_dma_tag_t dma_tag; 263 bus_dmamap_t dma_map; 264 bus_dma_segment_t dma_seg; 265 bus_size_t dma_size; 266 int dma_nseg; 267}; 268 269typedef enum _XSUM_CONTEXT_T { 270 OFFLOAD_NONE, 271 OFFLOAD_TCP_IP, 272 OFFLOAD_UDP_IP 273} XSUM_CONTEXT_T; 274 275struct em_softc; 276struct em_int_delay_info { 277 struct em_softc *sc; /* Back-pointer to the sc struct */ 278 int offset; /* Register offset to read/write */ 279 int value; /* Current value in usecs */ 280}; 281 282/* For 82544 PCIX Workaround */ 283typedef struct _ADDRESS_LENGTH_PAIR 284{ 285 u_int64_t address; 286 u_int32_t length; 287} ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR; 288 289typedef struct _DESCRIPTOR_PAIR 290{ 291 ADDRESS_LENGTH_PAIR descriptor[4]; 292 u_int32_t elements; 293} DESC_ARRAY, *PDESC_ARRAY; 294 295/* Our adapter structure */ 296struct em_softc { 297#ifdef __OpenBSD__ 298 struct device sc_dv; 299#endif 300 struct arpcom interface_data; 301 struct em_softc *next; 302 struct em_softc *prev; 303 struct em_hw hw; 304 305 /* FreeBSD operating-system-specific structures */ 306 struct em_osdep osdep; 307#ifdef __FreeBSD__ 308 struct device *dev; 309 struct resource *res_memory; 310 struct resource *res_ioport; 311 struct resource *res_interrupt; 312 void *int_handler_tag; 313#endif /* __FreeBSD__ */ 314 struct ifmedia media; 315#ifdef __FreeBSD__ 316 struct callout timer; 317 struct callout tx_fifo_timer; 318#endif /* __FreeBSD__ */ 319 int io_rid; 320#ifdef __FreeBSD__ 321 u_int8_t unit; 322 struct mtx mtx; 323#endif /* __FreeBSD__ */ 324 325#ifdef __OpenBSD__ 326 void *sc_intrhand; 327 struct timeout em_intr_enable; 328 struct timeout timer_handle; 329 struct timeout tx_fifo_timer_handle; 330#endif /* __OpenBSD__ */ 331 332 /* Info about the board itself */ 333 u_int32_t part_num; 334 u_int8_t link_active; 335 u_int16_t link_speed; 336 u_int16_t link_duplex; 337 u_int32_t smartspeed; 338 struct em_int_delay_info tx_int_delay; 339 struct em_int_delay_info tx_abs_int_delay; 340 struct em_int_delay_info rx_int_delay; 341 struct em_int_delay_info rx_abs_int_delay; 342 343 XSUM_CONTEXT_T active_checksum_context; 344 345 /* 346 * Transmit definitions 347 * 348 * We have an array of num_tx_desc descriptors (handled 349 * by the controller) paired with an array of tx_buffers 350 * (at tx_buffer_area). 351 * The index of the next available descriptor is next_avail_tx_desc. 352 * The number of remaining tx_desc is num_tx_desc_avail. 353 */ 354 struct em_dma_alloc txdma; /* bus_dma glue for tx desc */ 355 struct em_tx_desc *tx_desc_base; 356 u_int32_t next_avail_tx_desc; 357 u_int32_t oldest_used_tx_desc; 358 volatile u_int16_t num_tx_desc_avail; 359 u_int16_t num_tx_desc; 360 u_int32_t txd_cmd; 361 struct em_buffer *tx_buffer_area; 362 bus_dma_tag_t txtag; /* dma tag for tx */ 363 364 /* 365 * Receive definitions 366 * 367 * we have an array of num_rx_desc rx_desc (handled by the 368 * controller), and paired with an array of rx_buffers 369 * (at rx_buffer_area). 370 * The next pair to check on receive is at offset next_rx_desc_to_check 371 */ 372 struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */ 373 struct em_rx_desc *rx_desc_base; 374 u_int32_t next_rx_desc_to_check; 375 u_int16_t num_rx_desc; 376 u_int32_t rx_buffer_len; 377 struct em_buffer *rx_buffer_area; 378 bus_dma_tag_t rxtag; 379 380 /* Jumbo frame */ 381 struct mbuf *fmp; 382 struct mbuf *lmp; 383 384 u_int16_t tx_fifo_head; 385 386#ifdef __FreeBSD__ 387 struct sysctl_ctx_list sysctl_ctx; 388 struct sysctl_oid *sysctl_tree; 389#endif /* __FreeBSD__ */ 390 391 /* Misc stats maintained by the driver */ 392 unsigned long dropped_pkts; 393 unsigned long mbuf_alloc_failed; 394 unsigned long mbuf_cluster_failed; 395 unsigned long no_tx_desc_avail1; 396 unsigned long no_tx_desc_avail2; 397 unsigned long no_tx_map_avail; 398 unsigned long no_tx_dma_setup; 399 u_int64_t tx_fifo_reset; 400 u_int64_t tx_fifo_wrk; 401 402 /* For 82544 PCIX Workaround */ 403 boolean_t pcix_82544; 404 boolean_t in_detach; 405 406#ifdef DBG_STATS 407 unsigned long no_pkts_avail; 408 unsigned long clean_tx_interrupts; 409 410#endif 411 struct em_hw_stats stats; 412}; 413 414#ifdef __FreeBSD__ 415#define EM_LOCK_INIT(_sc, _name) \ 416 mtx_init(&(_sc)->mtx, _name, MTX_NETWORK_LOCK, MTX_DEF) 417#define EM_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->mtx) 418#define EM_LOCK(_sc) mtx_lock(&(_sc)->mtx) 419#define EM_UNLOCK(_sc) mtx_unlock(&(_sc)->mtx) 420#define EM_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->mtx, MA_OWNED) 421#endif /* __FreeBSD__ */ 422 423#ifdef __OpenBSD__ 424static inline int spl_use_arg(void *); 425static inline int spl_use_arg(void *v) { return splnet(); } 426#define EM_LOCK_INIT(_sc, _name) 427#define EM_LOCK_DESTROY(_sc) 428#define EM_LOCK_STATE() int em_hidden_splnet_s 429#define EM_LOCK(_sc) em_hidden_splnet_s = spl_use_arg(_sc) 430#define EM_UNLOCK(_sc) splx(em_hidden_splnet_s) 431#define EM_LOCK_ASSERT(_sc) splassert(IPL_NET) 432#endif /* __OpenBSD__ */ 433 434#endif /* _EM_H_DEFINED_ */ 435