Copyright (c) 1997, 1998
Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software
must display the following acknowledgement:
This product includes software developed by Bill Paul.
4. Neither the name of the author nor the names of any co-contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
$FreeBSD: xl.4,v 1.1 1998/08/16 17:19:58 wpaul Exp $
.Dd $Mdocdate: July 16 2013 $ .Dt XL 4 .Os .Sh NAME .Nm xl .Nd 3Com EtherLink XL and Fast EtherLink XL 10/100 Ethernet device .Sh SYNOPSIS .Cd "xl* at pci?" .Cd "xl* at cardbus?" .Cd "amphy* at mii?" .Cd "bmtphy* at mii?" .Cd "exphy* at mii?" .Cd "nsphy* at mii?" .Cd "tqphy* at mii?" .Sh DESCRIPTION The .Nm device driver supports the 3Com EtherLink XL and Fast EtherLink XL family of Ethernet cards, and embedded controllers based on the 3Com .Dq boomerang and .Dq cyclone bus master EtherLink XL chips. This includes, among others, the following models:
p l -tag -width 3CXXXXX -offset indent -compact t 3C555 EtherLink XL Mini PCI t 3C556 EtherLink XL Mini PCI t 3C556B EtherLink XL Mini PCI t 3C575 10/100 LAN CardBus PC Card t 3C656 10/100 LAN+Modem CardBus PC Card t 3C900 EtherLink XL PCI t 3C900B EtherLink XL PCI t 3C905 Fast EtherLink XL PCI t 3C905B Fast EtherLink XL PCI t 3C905C Fast EtherLink XL PCI t 3C980 Fast EtherLink Server NIC t 3CSOHO OfficeConnect Fast Ethernet NIC t 9201 NVIDIA nForce2 integrated 3Com 9201 (nForce2-ST, nForce2-GT) t 920BEMB 3c920B-EMB-WNM Integrated Fast Ethernet. .El
p Category 3, 4 or 5 unshielded twisted-pair (UTP) cable should be used for RJ-45 (10baseT), thick Ethernet coaxial (RG59 B/U, 50 ohm) for AUI/DIX, and thin Ethernet coaxial (RG58 A/U or C/U, 50 ohm +/- 4) for BNC (10base2). Some 3Com NICs also support MII connectors (switchable 10/100Mbps UTP). The 3C905B-FX and other similar cards are capable of 100Mbps over fiber.
p Hardware receive IP/TCP/UDP checksum offload for IPv4 is supported on the 3C905B.
p The .Nm driver additionally supports Wake on LAN (WoL). See .Xr arp 8 and .Xr ifconfig 8 for more details.
p The following media types and options (as given to .Xr ifconfig 8 ) are supported: l -tag -width xxx -offset indent t Cm media No autoselect Enable autoselection of media type and options. Note that this media type is only available with adapters that have external PHYs or built-in autonegotiation logic. For 3C900 and 3C900B adapters, the driver will choose the mode specified in the EEPROM. This can be changed by adding media options to the appropriate .Xr hostname.if 5 file. t Cm media No 100baseFX Cm mediaopt No full-duplex For those cards that support it, force full-duplex 100Mbps operation over fiber. t Cm media No 100baseFX Cm mediaopt No half-duplex For those cards that support it, force half-duplex 100Mbps operation over fiber. t Cm media No 100baseTX Cm mediaopt No full-duplex Set 100Mbps (Fast Ethernet) operation and force full-duplex mode. t Cm media No 100baseTX Cm mediaopt No half-duplex Set 100Mbps (Fast Ethernet) operation and force half-duplex mode. t Cm media No 10baseT Cm mediaopt No full-duplex Set 10baseT (UTP) operation and force full-duplex mode. t Cm media No 10baseT Cm mediaopt No half-duplex Set 10baseT (UTP) operation and force half-duplex mode. t Cm media No 10base5 Set 10base5 (thick-net) operation (half-duplex only). t Cm media No 10base2 Set 10base2 (thin-net) operation (half-duplex only). .El
p For more information on configuring this device, see .Xr ifconfig 8 . To view a list of media types and options supported by this card try c ifconfig <device> media . For example, c ifconfig xl0 media . .Sh DIAGNOSTICS l -diag t "xl0: couldn't map memory" A fatal initialization error has occurred. t "xl0: couldn't map interrupt" A fatal initialization error has occurred. t "xl0: device timeout" The device has stopped responding to the network, or there is a problem with the network connection (cable). t "xl0: no memory for rx list" The driver failed to allocate an mbuf for the receiver ring. t "xl0: no memory for tx list" The driver failed to allocate an mbuf for the transmitter ring when allocating a pad buffer or collapsing an mbuf chain into a cluster. t "xl0: command never completed!" Some commands issued to the 3C90x ASIC take time to complete: the driver is supposed to wait until the .Dq command in progress bit in the status register clears before continuing. In some instances, this bit may not clear. To avoid getting caught in an infinite wait loop, the driver only polls the bit a finite number of times before giving up, at which point it issues this message. This message may be printed during driver initialization on slower machines. If this message appears but the driver continues to function normally, the message can probably be ignored. t "xl0: WARNING: no media options bits set in the media options register!" This warning may appear when using the driver on some Dell Latitude docking stations with built-in 3C905-TX adapters. For whatever the reason, the .Dq MII available bit in the media options register on this particular equipment is not set, even though it should be (the 3C905-TX always uses an external PHY transceiver). The driver will attempt to guess the proper media type based on the PCI device ID word. The driver makes a lot of noise about this condition because the author considers it a manufacturing defect. .El .Sh SEE ALSO .Xr amphy 4 , .Xr arp 4 , .Xr bmtphy 4 , .Xr cardbus 4 , .Xr exphy 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr nsphy 4 , .Xr tqphy 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Sh HISTORY The .Nm device driver first appeared in .Fx 3.0 . .Ox support was added in .Ox 2.4 . .Sh AUTHORS The .Nm driver was written by .An Bill Paul Aq Mt wpaul@ctr.columbia.edu .