$NetBSD: ec.4,v 1.4 1998/08/09 00:39:02 thorpej Exp $
Copyright (c) 1997 The NetBSD Foundation, Inc.
All rights reserved.
This code is derived from software contributed to The NetBSD Foundation
by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
NASA Ames Research Center.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
.Dd $Mdocdate: June 26 2008 $ .Dt EC 4 .Os .Sh NAME .Nm ec .Nd 3Com EtherLink II (3c503) Ethernet device .Sh SYNOPSIS .Cd "ec0 at isa? port 0x250 iomem 0xd8000 irq 9" .Sh DESCRIPTION The .Nm device driver supports 3Com EtherLink II (3C503) Ethernet cards.
p The EtherLink II supports two media types on a single card. All support the AUI media type. The other media is either BNC or UTP behind a transceiver. Software cannot differentiate between BNC and UTP cards.
p The .Nm driver supports the following media types: l -tag -width 10baseX -offset indent t 10base5 Set 10base5 (thick-net) operation. t 10base2 Set BNC (10base2/thin-net) or UTP operation. .El
p For more information on configuring this device, see .Xr ifconfig 8 . To view a list of media types and options supported by your card try .Dq ifconfig <device> media . For example, .Dq ifconfig ec0 media . .Sh DIAGNOSTICS l -diag t "ec0: wildcarded IRQ is not allowed" The IRQ was wildcarded in the kernel configuration file. This is not supported. t "ec0: invalid IRQ <n>, must be 3, 4, 5, or 9" An IRQ other than the above listed IRQs was specified in the kernel configuration file. The EtherLink II hardware only supports the above listed IRQs. t "ec0: failed to clear shared memory at offset <off>" The memory test was unable to clear the interface's shared memory region. This often indicates that the card is configured at a conflicting .Em iomem address. .El .Sh SEE ALSO .Xr ifmedia 4 , .Xr intro 4 , .Xr isa 4 , .Xr hostname.if 5 , .Xr ifconfig 8