1/*
2 * EHCI HCD (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
5 *
6 * Bus Glue for AMD Alchemy Au1xxx
7 *
8 * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org>
9 *
10 * Modified for AMD Alchemy Au1200 EHC
11 *  by K.Boge <karsten.boge@amd.com>
12 *
13 * This file is licenced under the GPL.
14 */
15
16#include <linux/platform_device.h>
17#include <asm/mach-au1x00/au1000.h>
18
19#define USB_HOST_CONFIG   (USB_MSR_BASE + USB_MSR_MCFG)
20#define USB_MCFG_PFEN     (1<<31)
21#define USB_MCFG_RDCOMB   (1<<30)
22#define USB_MCFG_SSDEN    (1<<23)
23#define USB_MCFG_PHYPLLEN (1<<19)
24#define USB_MCFG_EHCCLKEN (1<<17)
25#define USB_MCFG_UCAM     (1<<7)
26#define USB_MCFG_EBMEN    (1<<3)
27#define USB_MCFG_EMEMEN   (1<<2)
28
29#define USBH_ENABLE_CE    (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
30
31#ifdef CONFIG_DMA_COHERENT
32#define USBH_ENABLE_INIT  (USBH_ENABLE_CE \
33                         | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
34                         | USB_MCFG_SSDEN | USB_MCFG_UCAM \
35                         | USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
36#else
37#define USBH_ENABLE_INIT  (USBH_ENABLE_CE \
38                         | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
39                         | USB_MCFG_SSDEN \
40                         | USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
41#endif
42#define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
43
44extern int usb_disabled(void);
45
46/*-------------------------------------------------------------------------*/
47
48static void au1xxx_start_ehc(struct platform_device *dev)
49{
50	pr_debug(__FILE__ ": starting Au1xxx EHCI USB Controller\n");
51
52	/* write HW defaults again in case Yamon cleared them */
53	if (au_readl(USB_HOST_CONFIG) == 0) {
54		au_writel(0x00d02000, USB_HOST_CONFIG);
55		au_readl(USB_HOST_CONFIG);
56		udelay(1000);
57	}
58	/* enable host controller */
59	au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
60	au_readl(USB_HOST_CONFIG);
61	udelay(1000);
62	au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG),
63		  USB_HOST_CONFIG);
64	au_readl(USB_HOST_CONFIG);
65	udelay(1000);
66
67	pr_debug(__FILE__ ": Clock to USB host has been enabled\n");
68}
69
70static void au1xxx_stop_ehc(struct platform_device *dev)
71{
72	pr_debug(__FILE__ ": stopping Au1xxx EHCI USB Controller\n");
73
74	/* Disable mem */
75	au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
76	udelay(1000);
77	/* Disable clock */
78	au_writel(~USB_MCFG_EHCCLKEN & au_readl(USB_HOST_CONFIG),
79		  USB_HOST_CONFIG);
80	au_readl(USB_HOST_CONFIG);
81}
82
83/*-------------------------------------------------------------------------*/
84
85/* configure so an HC device and id are always provided */
86/* always called with process context; sleeping is OK */
87
88/**
89 * usb_ehci_au1xxx_probe - initialize Au1xxx-based HCDs
90 * Context: !in_interrupt()
91 *
92 * Allocates basic resources for this USB host controller, and
93 * then invokes the start() method for the HCD associated with it
94 * through the hotplug entry's driver_data.
95 *
96 */
97int usb_ehci_au1xxx_probe(const struct hc_driver *driver,
98			  struct usb_hcd **hcd_out, struct platform_device *dev)
99{
100	int retval;
101	struct usb_hcd *hcd;
102	struct ehci_hcd *ehci;
103
104#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
105
106	/* Au1200 AB USB does not support coherent memory */
107	if (!(read_c0_prid() & 0xff)) {
108		pr_info("%s: this is chip revision AB!\n", dev->name);
109		pr_info("%s: update your board or re-configure the kernel\n",
110			dev->name);
111		return -ENODEV;
112	}
113#endif
114
115	au1xxx_start_ehc(dev);
116
117	if (dev->resource[1].flags != IORESOURCE_IRQ) {
118		pr_debug("resource[1] is not IORESOURCE_IRQ");
119		retval = -ENOMEM;
120	}
121	hcd = usb_create_hcd(driver, &dev->dev, "Au1xxx");
122	if (!hcd)
123		return -ENOMEM;
124	hcd->rsrc_start = dev->resource[0].start;
125	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
126
127	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
128		pr_debug("request_mem_region failed");
129		retval = -EBUSY;
130		goto err1;
131	}
132
133	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
134	if (!hcd->regs) {
135		pr_debug("ioremap failed");
136		retval = -ENOMEM;
137		goto err2;
138	}
139
140	ehci = hcd_to_ehci(hcd);
141	ehci->caps = hcd->regs;
142	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
143	/* cache this readonly data; minimize chip reads */
144	ehci->hcs_params = readl(&ehci->caps->hcs_params);
145
146	/* ehci_hcd_init(hcd_to_ehci(hcd)); */
147
148	retval =
149	    usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED | IRQF_SHARED);
150	if (retval == 0)
151		return retval;
152
153	au1xxx_stop_ehc(dev);
154	iounmap(hcd->regs);
155err2:
156	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
157err1:
158	usb_put_hcd(hcd);
159	return retval;
160}
161
162/* may be called without controller electrically present */
163/* may be called with controller, bus, and devices active */
164
165/**
166 * usb_ehci_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
167 * @dev: USB Host Controller being removed
168 * Context: !in_interrupt()
169 *
170 * Reverses the effect of usb_ehci_hcd_au1xxx_probe(), first invoking
171 * the HCD's stop() method.  It is always called from a thread
172 * context, normally "rmmod", "apmd", or something similar.
173 *
174 */
175void usb_ehci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
176{
177	usb_remove_hcd(hcd);
178	iounmap(hcd->regs);
179	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
180	usb_put_hcd(hcd);
181	au1xxx_stop_ehc(dev);
182}
183
184/*-------------------------------------------------------------------------*/
185
186static const struct hc_driver ehci_au1xxx_hc_driver = {
187	.description = hcd_name,
188	.product_desc = "Au1xxx EHCI",
189	.hcd_priv_size = sizeof(struct ehci_hcd),
190
191	/*
192	 * generic hardware linkage
193	 */
194	.irq = ehci_irq,
195	.flags = HCD_MEMORY | HCD_USB2,
196
197	/*
198	 * basic lifecycle operations
199	 */
200	.reset = ehci_init,
201	.start = ehci_run,
202	.stop = ehci_stop,
203	.shutdown = ehci_shutdown,
204
205	/*
206	 * managing i/o requests and associated device resources
207	 */
208	.urb_enqueue = ehci_urb_enqueue,
209	.urb_dequeue = ehci_urb_dequeue,
210	.endpoint_disable = ehci_endpoint_disable,
211
212	/*
213	 * scheduling support
214	 */
215	.get_frame_number = ehci_get_frame,
216
217	/*
218	 * root hub support
219	 */
220	.hub_status_data = ehci_hub_status_data,
221	.hub_control = ehci_hub_control,
222#ifdef	CONFIG_PM
223	.hub_suspend = ehci_hub_suspend,
224	.hub_resume = ehci_hub_resume,
225#endif
226};
227
228/*-------------------------------------------------------------------------*/
229
230static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
231{
232	struct usb_hcd *hcd = NULL;
233	int ret;
234
235	pr_debug("In ehci_hcd_au1xxx_drv_probe\n");
236
237	if (usb_disabled())
238		return -ENODEV;
239
240	ret = usb_ehci_au1xxx_probe(&ehci_au1xxx_hc_driver, &hcd, pdev);
241	return ret;
242}
243
244static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
245{
246	struct usb_hcd *hcd = platform_get_drvdata(pdev);
247
248	usb_ehci_au1xxx_remove(hcd, pdev);
249	return 0;
250}
251
252 /*TBD*/
253/*static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
254{
255	struct platform_device *pdev = to_platform_device(dev);
256	struct usb_hcd *hcd = dev_get_drvdata(dev);
257
258	return 0;
259}
260static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
261{
262	struct platform_device *pdev = to_platform_device(dev);
263	struct usb_hcd *hcd = dev_get_drvdata(dev);
264
265	return 0;
266}
267*/
268MODULE_ALIAS("au1xxx-ehci");
269static struct platform_driver ehci_hcd_au1xxx_driver = {
270	.probe = ehci_hcd_au1xxx_drv_probe,
271	.remove = ehci_hcd_au1xxx_drv_remove,
272	.shutdown = usb_hcd_platform_shutdown,
273	/*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
274	/*.resume       = ehci_hcd_au1xxx_drv_resume, */
275	.driver = {
276		.name = "au1xxx-ehci",
277		.bus = &platform_bus_type
278	}
279};
280