1/* -*- mode: c; c-basic-offset: 8 -*- */
2
3/* NCR Dual 700 MCA SCSI Driver
4 *
5 * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
6**-----------------------------------------------------------------------------
7**
8**  This program is free software; you can redistribute it and/or modify
9**  it under the terms of the GNU General Public License as published by
10**  the Free Software Foundation; either version 2 of the License, or
11**  (at your option) any later version.
12**
13**  This program is distributed in the hope that it will be useful,
14**  but WITHOUT ANY WARRANTY; without even the implied warranty of
15**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16**  GNU General Public License for more details.
17**
18**  You should have received a copy of the GNU General Public License
19**  along with this program; if not, write to the Free Software
20**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21**
22**-----------------------------------------------------------------------------
23 */
24
25/* Notes:
26 *
27 * Most of the work is done in the chip specific module, 53c700.o
28 *
29 * TODO List:
30 *
31 * 1. Extract the SCSI ID from the voyager CMOS table (necessary to
32 *    support multi-host environments.
33 *
34 * */
35
36
37/* CHANGELOG
38 *
39 * Version 2.2
40 *
41 * Added mca_set_adapter_name().
42 *
43 * Version 2.1
44 *
45 * Modularise the driver into a Board piece (this file) and a chip
46 * piece 53c700.[ch] and 53c700.scr, added module options.  You can
47 * now specify the scsi id by the parameters
48 *
49 * NCR_D700=slot:<n> [siop:<n>] id:<n> ....
50 *
51 * They need to be comma separated if compiled into the kernel
52 *
53 * Version 2.0
54 *
55 * Initial implementation of TCQ (Tag Command Queueing).  TCQ is full
56 * featured and uses the clock algorithm to keep track of outstanding
57 * tags and guard against individual tag starvation.  Also fixed a bug
58 * in all of the 1.x versions where the D700_data_residue() function
59 * was returning results off by 32 bytes (and thus causing the same 32
60 * bytes to be written twice corrupting the data block).  It turns out
61 * the 53c700 only has a 6 bit DBC and DFIFO registers not 7 bit ones
62 * like the 53c710 (The 710 is the only data manual still available,
63 * which I'd been using to program the 700).
64 *
65 * Version 1.2
66 *
67 * Much improved message handling engine
68 *
69 * Version 1.1
70 *
71 * Add code to handle selection reasonably correctly.  By the time we
72 * get the selection interrupt, we've already responded, but drop off the
73 * bus and hope the selector will go away.
74 *
75 * Version 1.0:
76 *
77 *   Initial release.  Fully functional except for procfs and tag
78 * command queueing.  Has only been tested on cards with 53c700-66
79 * chips and only single ended. Features are
80 *
81 * 1. Synchronous data transfers to offset 8 (limit of 700-66) and
82 *    100ns (10MHz) limit of SCSI-2
83 *
84 * 2. Disconnection and reselection
85 *
86 * Testing:
87 *
88 *  I've only really tested this with the 700-66 chip, but have done
89 * soak tests in multi-device environments to verify that
90 * disconnections and reselections are being processed correctly.
91 * */
92
93#define NCR_D700_VERSION "2.2"
94
95#include <linux/blkdev.h>
96#include <linux/interrupt.h>
97#include <linux/kernel.h>
98#include <linux/module.h>
99#include <linux/mca.h>
100#include <linux/interrupt.h>
101#include <asm/io.h>
102#include <scsi/scsi_host.h>
103#include <scsi/scsi_device.h>
104#include <scsi/scsi_transport.h>
105#include <scsi/scsi_transport_spi.h>
106
107#include "53c700.h"
108#include "NCR_D700.h"
109
110static char *NCR_D700;		/* command line from insmod */
111
112MODULE_AUTHOR("James Bottomley");
113MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
114MODULE_LICENSE("GPL");
115module_param(NCR_D700, charp, 0);
116
117static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
118	{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };
119
120#ifdef MODULE
121#define ARG_SEP ' '
122#else
123#define ARG_SEP ','
124#endif
125
126static int __init
127param_setup(char *string)
128{
129	char *pos = string, *next;
130	int slot = -1, siop = -1;
131
132	while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
133		int val = (int)simple_strtoul(++next, NULL, 0);
134
135		if(!strncmp(pos, "slot:", 5))
136			slot = val;
137		else if(!strncmp(pos, "siop:", 5))
138			siop = val;
139		else if(!strncmp(pos, "id:", 3)) {
140			if(slot == -1) {
141				printk(KERN_WARNING "NCR D700: Must specify slot for id parameter\n");
142			} else if(slot > MCA_MAX_SLOT_NR) {
143				printk(KERN_WARNING "NCR D700: Illegal slot %d for id %d\n", slot, val);
144			} else {
145				if(siop != 0 && siop != 1) {
146					id_array[slot*2] = val;
147					id_array[slot*2 + 1] =val;
148				} else {
149					id_array[slot*2 + siop] = val;
150				}
151			}
152		}
153		if((pos = strchr(pos, ARG_SEP)) != NULL)
154			pos++;
155	}
156	return 1;
157}
158
159/* Host template.  The 53c700 routine NCR_700_detect will
160 * fill in all of the missing routines */
161static struct scsi_host_template NCR_D700_driver_template = {
162	.module			= THIS_MODULE,
163	.name			= "NCR Dual 700 MCA",
164	.proc_name		= "NCR_D700",
165	.this_id		= 7,
166};
167
168/* We needs this helper because we have two hosts per struct device */
169struct NCR_D700_private {
170	struct device		*dev;
171	struct Scsi_Host	*hosts[2];
172	char			name[30];
173	char			pad;
174};
175
176static int __devinit
177NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
178		   int slot, u32 region, int differential)
179{
180	struct NCR_700_Host_Parameters *hostdata;
181	struct Scsi_Host *host;
182	int ret;
183
184	hostdata = kmalloc(sizeof(*hostdata), GFP_KERNEL);
185	if (!hostdata) {
186		printk(KERN_ERR "NCR D700: SIOP%d: Failed to allocate host"
187		       "data, detatching\n", siop);
188		return -ENOMEM;
189	}
190	memset(hostdata, 0, sizeof(*hostdata));
191
192	if (!request_region(region, 64, "NCR_D700")) {
193		printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n",
194				region);
195		ret = -ENODEV;
196		goto region_failed;
197	}
198
199	/* Fill in the three required pieces of hostdata */
200	hostdata->base = ioport_map(region, 64);
201	hostdata->differential = (((1<<siop) & differential) != 0);
202	hostdata->clock = NCR_D700_CLOCK_MHZ;
203	hostdata->burst_length = 8;
204
205	/* and register the siop */
206	host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);
207	if (!host) {
208		ret = -ENOMEM;
209		goto detect_failed;
210	}
211
212	p->hosts[siop] = host;
213	host->this_id = id_array[slot * 2 + siop];
214	host->irq = irq;
215	host->base = region;
216	scsi_scan_host(host);
217
218	return 0;
219
220 detect_failed:
221	release_region(region, 64);
222 region_failed:
223	kfree(hostdata);
224
225	return ret;
226}
227
228static int
229NCR_D700_intr(int irq, void *data)
230{
231	struct NCR_D700_private *p = (struct NCR_D700_private *)data;
232	int i, found = 0;
233
234	for (i = 0; i < 2; i++)
235		if (p->hosts[i] &&
236		    NCR_700_intr(irq, p->hosts[i]) == IRQ_HANDLED)
237			found++;
238
239	return found ? IRQ_HANDLED : IRQ_NONE;
240}
241
242/* Detect a D700 card.  Note, because of the setup --- the chips are
243 * essentially connectecd to the MCA bus independently, it is easier
244 * to set them up as two separate host adapters, rather than one
245 * adapter with two channels */
246static int __devinit
247NCR_D700_probe(struct device *dev)
248{
249	struct NCR_D700_private *p;
250	int differential;
251	static int banner = 1;
252	struct mca_device *mca_dev = to_mca_device(dev);
253	int slot = mca_dev->slot;
254	int found = 0;
255	int irq, i;
256	int pos3j, pos3k, pos3a, pos3b, pos4;
257	__u32 base_addr, offset_addr;
258
259	/* enable board interrupt */
260	pos4 = mca_device_read_pos(mca_dev, 4);
261	pos4 |= 0x4;
262	mca_device_write_pos(mca_dev, 4, pos4);
263
264	mca_device_write_pos(mca_dev, 6, 9);
265	pos3j = mca_device_read_pos(mca_dev, 3);
266	mca_device_write_pos(mca_dev, 6, 10);
267	pos3k = mca_device_read_pos(mca_dev, 3);
268	mca_device_write_pos(mca_dev, 6, 0);
269	pos3a = mca_device_read_pos(mca_dev, 3);
270	mca_device_write_pos(mca_dev, 6, 1);
271	pos3b = mca_device_read_pos(mca_dev, 3);
272
273	base_addr = ((pos3j << 8) | pos3k) & 0xfffffff0;
274	offset_addr = ((pos3a << 8) | pos3b) & 0xffffff70;
275
276	irq = (pos4 & 0x3) + 11;
277	if(irq >= 13)
278		irq++;
279	if(banner) {
280		printk(KERN_NOTICE "NCR D700: Driver Version " NCR_D700_VERSION "\n"
281		       "NCR D700:  Copyright (c) 2001 by James.Bottomley@HansenPartnership.com\n"
282		       "NCR D700:\n");
283		banner = 0;
284	}
285	/* now do the bus related transforms */
286	irq = mca_device_transform_irq(mca_dev, irq);
287	base_addr = mca_device_transform_ioport(mca_dev, base_addr);
288	offset_addr = mca_device_transform_ioport(mca_dev, offset_addr);
289
290	printk(KERN_NOTICE "NCR D700: found in slot %d  irq = %d  I/O base = 0x%x\n", slot, irq, offset_addr);
291
292	/*outb(BOARD_RESET, base_addr);*/
293
294	/* clear any pending interrupts */
295	(void)inb(base_addr + 0x08);
296	/* get modctl, used later for setting diff bits */
297	switch(differential = (inb(base_addr + 0x08) >> 6)) {
298	case 0x00:
299		/* only SIOP1 differential */
300		differential = 0x02;
301		break;
302	case 0x01:
303		/* Both SIOPs differential */
304		differential = 0x03;
305		break;
306	case 0x03:
307		/* No SIOPs differential */
308		differential = 0x00;
309		break;
310	default:
311		printk(KERN_ERR "D700: UNEXPECTED DIFFERENTIAL RESULT 0x%02x\n",
312		       differential);
313		differential = 0x00;
314		break;
315	}
316
317	p = kmalloc(sizeof(*p), GFP_KERNEL);
318	if (!p)
319		return -ENOMEM;
320	memset(p, '\0', sizeof(*p));
321	p->dev = dev;
322	snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id);
323	if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) {
324		printk(KERN_ERR "D700: request_irq failed\n");
325		kfree(p);
326		return -EBUSY;
327	}
328	/* plumb in both 700 chips */
329	for (i = 0; i < 2; i++) {
330		int err;
331
332		if ((err = NCR_D700_probe_one(p, i, irq, slot,
333					      offset_addr + (0x80 * i),
334					      differential)) != 0)
335			printk("D700: SIOP%d: probe failed, error = %d\n",
336			       i, err);
337		else
338			found++;
339	}
340
341	if (!found) {
342		kfree(p);
343		return -ENODEV;
344	}
345
346	mca_device_set_claim(mca_dev, 1);
347	mca_device_set_name(mca_dev, "NCR_D700");
348	dev_set_drvdata(dev, p);
349	return 0;
350}
351
352static void __devexit
353NCR_D700_remove_one(struct Scsi_Host *host)
354{
355	scsi_remove_host(host);
356	NCR_700_release(host);
357	kfree((struct NCR_700_Host_Parameters *)host->hostdata[0]);
358	free_irq(host->irq, host);
359	release_region(host->base, 64);
360}
361
362static int __devexit
363NCR_D700_remove(struct device *dev)
364{
365	struct NCR_D700_private *p = dev_get_drvdata(dev);
366	int i;
367
368	for (i = 0; i < 2; i++)
369		NCR_D700_remove_one(p->hosts[i]);
370
371	kfree(p);
372	return 0;
373}
374
375static short NCR_D700_id_table[] = { NCR_D700_MCA_ID, 0 };
376
377static struct mca_driver NCR_D700_driver = {
378	.id_table = NCR_D700_id_table,
379	.driver = {
380		.name		= "NCR_D700",
381		.bus		= &mca_bus_type,
382		.probe		= NCR_D700_probe,
383		.remove		= __devexit_p(NCR_D700_remove),
384	},
385};
386
387static int __init NCR_D700_init(void)
388{
389#ifdef MODULE
390	if (NCR_D700)
391		param_setup(NCR_D700);
392#endif
393
394	return mca_register_driver(&NCR_D700_driver);
395}
396
397static void __exit NCR_D700_exit(void)
398{
399	mca_unregister_driver(&NCR_D700_driver);
400}
401
402module_init(NCR_D700_init);
403module_exit(NCR_D700_exit);
404
405__setup("NCR_D700=", param_setup);
406