1/*
2   3w-9xxx.h -- 3ware 9000 Storage Controller device driver for Linux.
3
4   Written By: Adam Radford <linuxraid@amcc.com>
5   Modifications By: Tom Couch <linuxraid@amcc.com>
6
7   Copyright (C) 2004-2006 Applied Micro Circuits Corporation.
8
9   This program is free software; you can redistribute it and/or modify
10   it under the terms of the GNU General Public License as published by
11   the Free Software Foundation; version 2 of the License.
12
13   This program is distributed in the hope that it will be useful,
14   but WITHOUT ANY WARRANTY; without even the implied warranty of
15   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16   GNU General Public License for more details.
17
18   NO WARRANTY
19   THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
20   CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
21   LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
22   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
23   solely responsible for determining the appropriateness of using and
24   distributing the Program and assumes all risks associated with its
25   exercise of rights under this Agreement, including but not limited to
26   the risks and costs of program errors, damage to or loss of data,
27   programs or equipment, and unavailability or interruption of operations.
28
29   DISCLAIMER OF LIABILITY
30   NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
31   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32   DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
33   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
34   TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
35   USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
36   HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
37
38   You should have received a copy of the GNU General Public License
39   along with this program; if not, write to the Free Software
40   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
41
42   Bugs/Comments/Suggestions should be mailed to:
43   linuxraid@amcc.com
44
45   For more information, goto:
46   http://www.amcc.com
47*/
48
49#ifndef _3W_9XXX_H
50#define _3W_9XXX_H
51
52/* AEN string type */
53typedef struct TAG_twa_message_type {
54  unsigned int   code;
55  char*          text;
56} twa_message_type;
57
58/* AEN strings */
59static twa_message_type twa_aen_table[] = {
60	{0x0000, "AEN queue empty"},
61	{0x0001, "Controller reset occurred"},
62	{0x0002, "Degraded unit detected"},
63	{0x0003, "Controller error occured"},
64	{0x0004, "Background rebuild failed"},
65	{0x0005, "Background rebuild done"},
66	{0x0006, "Incomplete unit detected"},
67	{0x0007, "Background initialize done"},
68	{0x0008, "Unclean shutdown detected"},
69	{0x0009, "Drive timeout detected"},
70	{0x000A, "Drive error detected"},
71	{0x000B, "Rebuild started"},
72	{0x000C, "Background initialize started"},
73	{0x000D, "Entire logical unit was deleted"},
74	{0x000E, "Background initialize failed"},
75	{0x000F, "SMART attribute exceeded threshold"},
76	{0x0010, "Power supply reported AC under range"},
77	{0x0011, "Power supply reported DC out of range"},
78	{0x0012, "Power supply reported a malfunction"},
79	{0x0013, "Power supply predicted malfunction"},
80	{0x0014, "Battery charge is below threshold"},
81	{0x0015, "Fan speed is below threshold"},
82	{0x0016, "Temperature sensor is above threshold"},
83	{0x0017, "Power supply was removed"},
84	{0x0018, "Power supply was inserted"},
85	{0x0019, "Drive was removed from a bay"},
86	{0x001A, "Drive was inserted into a bay"},
87	{0x001B, "Drive bay cover door was opened"},
88	{0x001C, "Drive bay cover door was closed"},
89	{0x001D, "Product case was opened"},
90	{0x0020, "Prepare for shutdown (power-off)"},
91	{0x0021, "Downgrade UDMA mode to lower speed"},
92	{0x0022, "Upgrade UDMA mode to higher speed"},
93	{0x0023, "Sector repair completed"},
94	{0x0024, "Sbuf memory test failed"},
95	{0x0025, "Error flushing cached write data to array"},
96	{0x0026, "Drive reported data ECC error"},
97	{0x0027, "DCB has checksum error"},
98	{0x0028, "DCB version is unsupported"},
99	{0x0029, "Background verify started"},
100	{0x002A, "Background verify failed"},
101	{0x002B, "Background verify done"},
102	{0x002C, "Bad sector overwritten during rebuild"},
103	{0x002D, "Background rebuild error on source drive"},
104	{0x002E, "Replace failed because replacement drive too small"},
105	{0x002F, "Verify failed because array was never initialized"},
106	{0x0030, "Unsupported ATA drive"},
107	{0x0031, "Synchronize host/controller time"},
108	{0x0032, "Spare capacity is inadequate for some units"},
109	{0x0033, "Background migration started"},
110	{0x0034, "Background migration failed"},
111	{0x0035, "Background migration done"},
112	{0x0036, "Verify detected and fixed data/parity mismatch"},
113	{0x0037, "SO-DIMM incompatible"},
114	{0x0038, "SO-DIMM not detected"},
115	{0x0039, "Corrected Sbuf ECC error"},
116	{0x003A, "Drive power on reset detected"},
117	{0x003B, "Background rebuild paused"},
118	{0x003C, "Background initialize paused"},
119	{0x003D, "Background verify paused"},
120	{0x003E, "Background migration paused"},
121	{0x003F, "Corrupt flash file system detected"},
122	{0x0040, "Flash file system repaired"},
123	{0x0041, "Unit number assignments were lost"},
124	{0x0042, "Error during read of primary DCB"},
125	{0x0043, "Latent error found in backup DCB"},
126	{0x00FC, "Recovered/finished array membership update"},
127	{0x00FD, "Handler lockup"},
128	{0x00FE, "Retrying PCI transfer"},
129	{0x00FF, "AEN queue is full"},
130	{0xFFFFFFFF, (char*) 0}
131};
132
133/* AEN severity table */
134static char *twa_aen_severity_table[] =
135{
136	"None", "ERROR", "WARNING", "INFO", "DEBUG", (char*) 0
137};
138
139/* Error strings */
140static twa_message_type twa_error_table[] = {
141	{0x0100, "SGL entry contains zero data"},
142	{0x0101, "Invalid command opcode"},
143	{0x0102, "SGL entry has unaligned address"},
144	{0x0103, "SGL size does not match command"},
145	{0x0104, "SGL entry has illegal length"},
146	{0x0105, "Command packet is not aligned"},
147	{0x0106, "Invalid request ID"},
148	{0x0107, "Duplicate request ID"},
149	{0x0108, "ID not locked"},
150	{0x0109, "LBA out of range"},
151	{0x010A, "Logical unit not supported"},
152	{0x010B, "Parameter table does not exist"},
153	{0x010C, "Parameter index does not exist"},
154	{0x010D, "Invalid field in CDB"},
155	{0x010E, "Specified port has invalid drive"},
156	{0x010F, "Parameter item size mismatch"},
157	{0x0110, "Failed memory allocation"},
158	{0x0111, "Memory request too large"},
159	{0x0112, "Out of memory segments"},
160	{0x0113, "Invalid address to deallocate"},
161	{0x0114, "Out of memory"},
162	{0x0115, "Out of heap"},
163	{0x0120, "Double degrade"},
164	{0x0121, "Drive not degraded"},
165	{0x0122, "Reconstruct error"},
166	{0x0123, "Replace not accepted"},
167	{0x0124, "Replace drive capacity too small"},
168	{0x0125, "Sector count not allowed"},
169	{0x0126, "No spares left"},
170	{0x0127, "Reconstruct error"},
171	{0x0128, "Unit is offline"},
172	{0x0129, "Cannot update status to DCB"},
173	{0x0130, "Invalid stripe handle"},
174	{0x0131, "Handle that was not locked"},
175	{0x0132, "Handle that was not empty"},
176	{0x0133, "Handle has different owner"},
177	{0x0140, "IPR has parent"},
178	{0x0150, "Illegal Pbuf address alignment"},
179	{0x0151, "Illegal Pbuf transfer length"},
180	{0x0152, "Illegal Sbuf address alignment"},
181	{0x0153, "Illegal Sbuf transfer length"},
182	{0x0160, "Command packet too large"},
183	{0x0161, "SGL exceeds maximum length"},
184	{0x0162, "SGL has too many entries"},
185	{0x0170, "Insufficient resources for rebuilder"},
186	{0x0171, "Verify error (data != parity)"},
187	{0x0180, "Requested segment not in directory of this DCB"},
188	{0x0181, "DCB segment has unsupported version"},
189	{0x0182, "DCB segment has checksum error"},
190	{0x0183, "DCB support (settings) segment invalid"},
191	{0x0184, "DCB UDB (unit descriptor block) segment invalid"},
192	{0x0185, "DCB GUID (globally unique identifier) segment invalid"},
193	{0x01A0, "Could not clear Sbuf"},
194	{0x01C0, "Flash identify failed"},
195	{0x01C1, "Flash out of bounds"},
196	{0x01C2, "Flash verify error"},
197	{0x01C3, "Flash file object not found"},
198	{0x01C4, "Flash file already present"},
199	{0x01C5, "Flash file system full"},
200	{0x01C6, "Flash file not present"},
201	{0x01C7, "Flash file size error"},
202	{0x01C8, "Bad flash file checksum"},
203	{0x01CA, "Corrupt flash file system detected"},
204	{0x01D0, "Invalid field in parameter list"},
205	{0x01D1, "Parameter list length error"},
206	{0x01D2, "Parameter item is not changeable"},
207	{0x01D3, "Parameter item is not saveable"},
208	{0x0200, "UDMA CRC error"},
209	{0x0201, "Internal CRC error"},
210	{0x0202, "Data ECC error"},
211	{0x0203, "ADP level 1 error"},
212	{0x0204, "Port timeout"},
213	{0x0205, "Drive power on reset"},
214	{0x0206, "ADP level 2 error"},
215	{0x0207, "Soft reset failed"},
216	{0x0208, "Drive not ready"},
217	{0x0209, "Unclassified port error"},
218	{0x020A, "Drive aborted command"},
219	{0x0210, "Internal CRC error"},
220	{0x0211, "PCI abort error"},
221	{0x0212, "PCI parity error"},
222	{0x0213, "Port handler error"},
223	{0x0214, "Token interrupt count error"},
224	{0x0215, "Timeout waiting for PCI transfer"},
225	{0x0216, "Corrected buffer ECC"},
226	{0x0217, "Uncorrected buffer ECC"},
227	{0x0230, "Unsupported command during flash recovery"},
228	{0x0231, "Next image buffer expected"},
229	{0x0232, "Binary image architecture incompatible"},
230	{0x0233, "Binary image has no signature"},
231	{0x0234, "Binary image has bad checksum"},
232	{0x0235, "Image downloaded overflowed buffer"},
233	{0x0240, "I2C device not found"},
234	{0x0241, "I2C transaction aborted"},
235	{0x0242, "SO-DIMM parameter(s) incompatible using defaults"},
236	{0x0243, "SO-DIMM unsupported"},
237	{0x0248, "SPI transfer status error"},
238	{0x0249, "SPI transfer timeout error"},
239	{0x0250, "Invalid unit descriptor size in CreateUnit"},
240	{0x0251, "Unit descriptor size exceeds data buffer in CreateUnit"},
241	{0x0252, "Invalid value in CreateUnit descriptor"},
242	{0x0253, "Inadequate disk space to support descriptor in CreateUnit"},
243	{0x0254, "Unable to create data channel for this unit descriptor"},
244	{0x0255, "CreateUnit descriptor specifies a drive already in use"},
245	{0x0256, "Unable to write configuration to all disks during CreateUnit"},
246	{0x0257, "CreateUnit does not support this descriptor version"},
247	{0x0258, "Invalid subunit for RAID 0 or 5 in CreateUnit"},
248	{0x0259, "Too many descriptors in CreateUnit"},
249	{0x025A, "Invalid configuration specified in CreateUnit descriptor"},
250	{0x025B, "Invalid LBA offset specified in CreateUnit descriptor"},
251	{0x025C, "Invalid stripelet size specified in CreateUnit descriptor"},
252	{0x0260, "SMART attribute exceeded threshold"},
253	{0xFFFFFFFF, (char*) 0}
254};
255
256/* Control register bit definitions */
257#define TW_CONTROL_CLEAR_HOST_INTERRUPT	       0x00080000
258#define TW_CONTROL_CLEAR_ATTENTION_INTERRUPT   0x00040000
259#define TW_CONTROL_MASK_COMMAND_INTERRUPT      0x00020000
260#define TW_CONTROL_MASK_RESPONSE_INTERRUPT     0x00010000
261#define TW_CONTROL_UNMASK_COMMAND_INTERRUPT    0x00008000
262#define TW_CONTROL_UNMASK_RESPONSE_INTERRUPT   0x00004000
263#define TW_CONTROL_CLEAR_ERROR_STATUS	       0x00000200
264#define TW_CONTROL_ISSUE_SOFT_RESET	       0x00000100
265#define TW_CONTROL_ENABLE_INTERRUPTS	       0x00000080
266#define TW_CONTROL_DISABLE_INTERRUPTS	       0x00000040
267#define TW_CONTROL_ISSUE_HOST_INTERRUPT	       0x00000020
268#define TW_CONTROL_CLEAR_PARITY_ERROR          0x00800000
269#define TW_CONTROL_CLEAR_QUEUE_ERROR           0x00400000
270#define TW_CONTROL_CLEAR_PCI_ABORT             0x00100000
271
272/* Status register bit definitions */
273#define TW_STATUS_MAJOR_VERSION_MASK	       0xF0000000
274#define TW_STATUS_MINOR_VERSION_MASK	       0x0F000000
275#define TW_STATUS_PCI_PARITY_ERROR	       0x00800000
276#define TW_STATUS_QUEUE_ERROR		       0x00400000
277#define TW_STATUS_MICROCONTROLLER_ERROR	       0x00200000
278#define TW_STATUS_PCI_ABORT		       0x00100000
279#define TW_STATUS_HOST_INTERRUPT	       0x00080000
280#define TW_STATUS_ATTENTION_INTERRUPT	       0x00040000
281#define TW_STATUS_COMMAND_INTERRUPT	       0x00020000
282#define TW_STATUS_RESPONSE_INTERRUPT	       0x00010000
283#define TW_STATUS_COMMAND_QUEUE_FULL	       0x00008000
284#define TW_STATUS_RESPONSE_QUEUE_EMPTY	       0x00004000
285#define TW_STATUS_MICROCONTROLLER_READY	       0x00002000
286#define TW_STATUS_COMMAND_QUEUE_EMPTY	       0x00001000
287#define TW_STATUS_EXPECTED_BITS		       0x00002000
288#define TW_STATUS_UNEXPECTED_BITS	       0x00F00000
289#define TW_STATUS_VALID_INTERRUPT              0x00DF0000
290
291/* PCI related defines */
292#define TW_PCI_CLEAR_PARITY_ERRORS 0xc100
293#define TW_PCI_CLEAR_PCI_ABORT     0x2000
294
295/* Command packet opcodes used by the driver */
296#define TW_OP_INIT_CONNECTION 0x1
297#define TW_OP_GET_PARAM	      0x12
298#define TW_OP_SET_PARAM	      0x13
299#define TW_OP_EXECUTE_SCSI    0x10
300#define TW_OP_DOWNLOAD_FIRMWARE 0x16
301#define TW_OP_RESET             0x1C
302
303/* Asynchronous Event Notification (AEN) codes used by the driver */
304#define TW_AEN_QUEUE_EMPTY       0x0000
305#define TW_AEN_SOFT_RESET        0x0001
306#define TW_AEN_SYNC_TIME_WITH_HOST 0x031
307#define TW_AEN_SEVERITY_ERROR    0x1
308#define TW_AEN_SEVERITY_DEBUG    0x4
309#define TW_AEN_NOT_RETRIEVED 0x1
310#define TW_AEN_RETRIEVED 0x2
311
312/* Command state defines */
313#define TW_S_INITIAL   0x1  /* Initial state */
314#define TW_S_STARTED   0x2  /* Id in use */
315#define TW_S_POSTED    0x4  /* Posted to the controller */
316#define TW_S_PENDING   0x8  /* Waiting to be posted in isr */
317#define TW_S_COMPLETED 0x10 /* Completed by isr */
318#define TW_S_FINISHED  0x20 /* I/O completely done */
319
320/* Compatibility defines */
321#define TW_9000_ARCH_ID 0x5
322#define TW_CURRENT_DRIVER_SRL 30
323#define TW_CURRENT_DRIVER_BUILD 80
324#define TW_CURRENT_DRIVER_BRANCH 0
325
326/* Phase defines */
327#define TW_PHASE_INITIAL 0
328#define TW_PHASE_SINGLE  1
329#define TW_PHASE_SGLIST  2
330
331/* Misc defines */
332#define TW_9550SX_DRAIN_COMPLETED	      0xFFFF
333#define TW_SECTOR_SIZE                        512
334#define TW_ALIGNMENT_9000                     4  /* 4 bytes */
335#define TW_ALIGNMENT_9000_SGL                 0x3
336#define TW_MAX_UNITS			      16
337#define TW_MAX_UNITS_9650SE		      32
338#define TW_INIT_MESSAGE_CREDITS		      0x100
339#define TW_INIT_COMMAND_PACKET_SIZE	      0x3
340#define TW_INIT_COMMAND_PACKET_SIZE_EXTENDED  0x6
341#define TW_EXTENDED_INIT_CONNECT	      0x2
342#define TW_BUNDLED_FW_SAFE_TO_FLASH	      0x4
343#define TW_CTLR_FW_RECOMMENDS_FLASH	      0x8
344#define TW_CTLR_FW_COMPATIBLE		      0x2
345#define TW_BASE_FW_SRL			      24
346#define TW_BASE_FW_BRANCH		      0
347#define TW_BASE_FW_BUILD		      1
348#define TW_FW_SRL_LUNS_SUPPORTED              28
349#define TW_Q_LENGTH			      256
350#define TW_Q_START			      0
351#define TW_MAX_SLOT			      32
352#define TW_MAX_RESET_TRIES		      2
353#define TW_MAX_CMDS_PER_LUN		      254
354#define TW_MAX_RESPONSE_DRAIN		      256
355#define TW_MAX_AEN_DRAIN		      40
356#define TW_IN_RESET                           2
357#define TW_IN_ATTENTION_LOOP		      4
358#define TW_MAX_SECTORS                        256
359#define TW_AEN_WAIT_TIME                      1000
360#define TW_IOCTL_WAIT_TIME                    (1 * HZ) /* 1 second */
361#define TW_MAX_CDB_LEN                        16
362#define TW_ISR_DONT_COMPLETE                  2
363#define TW_ISR_DONT_RESULT                    3
364#define TW_IOCTL_CHRDEV_TIMEOUT               60 /* 60 seconds */
365#define TW_IOCTL_CHRDEV_FREE                  -1
366#define TW_COMMAND_OFFSET                     128 /* 128 bytes */
367#define TW_VERSION_TABLE                      0x0402
368#define TW_TIMEKEEP_TABLE		      0x040A
369#define TW_INFORMATION_TABLE		      0x0403
370#define TW_PARAM_FWVER			      3
371#define TW_PARAM_FWVER_LENGTH		      16
372#define TW_PARAM_BIOSVER		      4
373#define TW_PARAM_BIOSVER_LENGTH		      16
374#define TW_PARAM_PORTCOUNT		      3
375#define TW_PARAM_PORTCOUNT_LENGTH	      1
376#define TW_MIN_SGL_LENGTH                     0x200 /* 512 bytes */
377#define TW_MAX_SENSE_LENGTH                   256
378#define TW_EVENT_SOURCE_AEN                   0x1000
379#define TW_EVENT_SOURCE_COMMAND               0x1001
380#define TW_EVENT_SOURCE_PCHIP                 0x1002
381#define TW_EVENT_SOURCE_DRIVER                0x1003
382#define TW_IOCTL_GET_COMPATIBILITY_INFO	      0x101
383#define TW_IOCTL_GET_LAST_EVENT               0x102
384#define TW_IOCTL_GET_FIRST_EVENT              0x103
385#define TW_IOCTL_GET_NEXT_EVENT               0x104
386#define TW_IOCTL_GET_PREVIOUS_EVENT           0x105
387#define TW_IOCTL_GET_LOCK                     0x106
388#define TW_IOCTL_RELEASE_LOCK                 0x107
389#define TW_IOCTL_FIRMWARE_PASS_THROUGH        0x108
390#define TW_IOCTL_ERROR_STATUS_NOT_LOCKED      0x1001 // Not locked
391#define TW_IOCTL_ERROR_STATUS_LOCKED          0x1002 // Already locked
392#define TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS  0x1003 // No more events
393#define TW_IOCTL_ERROR_STATUS_AEN_CLOBBER     0x1004 // AEN clobber occurred
394#define TW_IOCTL_ERROR_OS_EFAULT	      -EFAULT // Bad address
395#define TW_IOCTL_ERROR_OS_EINTR		      -EINTR  // Interrupted system call
396#define TW_IOCTL_ERROR_OS_EINVAL	      -EINVAL // Invalid argument
397#define TW_IOCTL_ERROR_OS_ENOMEM	      -ENOMEM // Out of memory
398#define TW_IOCTL_ERROR_OS_ERESTARTSYS	      -ERESTARTSYS // Restart system call
399#define TW_IOCTL_ERROR_OS_EIO		      -EIO // I/O error
400#define TW_IOCTL_ERROR_OS_ENOTTY	      -ENOTTY // Not a typewriter
401#define TW_IOCTL_ERROR_OS_ENODEV	      -ENODEV // No such device
402#define TW_ALLOCATION_LENGTH		      128
403#define TW_SENSE_DATA_LENGTH		      18
404#define TW_STATUS_CHECK_CONDITION	      2
405#define TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED   0x10a
406#define TW_ERROR_UNIT_OFFLINE                 0x128
407#define TW_MESSAGE_SOURCE_CONTROLLER_ERROR    3
408#define TW_MESSAGE_SOURCE_CONTROLLER_EVENT    4
409#define TW_MESSAGE_SOURCE_LINUX_DRIVER        6
410#define TW_DRIVER TW_MESSAGE_SOURCE_LINUX_DRIVER
411#define TW_MESSAGE_SOURCE_LINUX_OS            9
412#define TW_OS TW_MESSAGE_SOURCE_LINUX_OS
413#ifndef PCI_DEVICE_ID_3WARE_9000
414#define PCI_DEVICE_ID_3WARE_9000 0x1002
415#endif
416#ifndef PCI_DEVICE_ID_3WARE_9550SX
417#define PCI_DEVICE_ID_3WARE_9550SX 0x1003
418#endif
419#ifndef PCI_DEVICE_ID_3WARE_9650SE
420#define PCI_DEVICE_ID_3WARE_9650SE 0x1004
421#endif
422
423/* Bitmask macros to eliminate bitfields */
424
425/* opcode: 5, reserved: 3 */
426#define TW_OPRES_IN(x,y) ((x << 5) | (y & 0x1f))
427#define TW_OP_OUT(x) (x & 0x1f)
428
429/* opcode: 5, sgloffset: 3 */
430#define TW_OPSGL_IN(x,y) ((x << 5) | (y & 0x1f))
431#define TW_SGL_OUT(x) ((x >> 5) & 0x7)
432
433/* severity: 3, reserved: 5 */
434#define TW_SEV_OUT(x) (x & 0x7)
435
436/* reserved_1: 4, response_id: 8, reserved_2: 20 */
437#define TW_RESID_OUT(x) ((x >> 4) & 0xff)
438
439/* request_id: 12, lun: 4 */
440#define TW_REQ_LUN_IN(lun, request_id) (((lun << 12) & 0xf000) | (request_id & 0xfff))
441#define TW_LUN_OUT(lun) ((lun >> 12) & 0xf)
442
443/* Macros */
444#define TW_CONTROL_REG_ADDR(x) (x->base_addr)
445#define TW_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0x4)
446#define TW_COMMAND_QUEUE_REG_ADDR(x) (sizeof(dma_addr_t) > 4 ? ((unsigned char __iomem *)x->base_addr + 0x20) : ((unsigned char __iomem *)x->base_addr + 0x8))
447#define TW_COMMAND_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x20)
448#define TW_RESPONSE_QUEUE_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0xC)
449#define TW_RESPONSE_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x30)
450#define TW_CLEAR_ALL_INTERRUPTS(x) (writel(TW_STATUS_VALID_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
451#define TW_CLEAR_ATTENTION_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
452#define TW_CLEAR_HOST_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_HOST_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
453#define TW_DISABLE_INTERRUPTS(x) (writel(TW_CONTROL_DISABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x)))
454#define TW_ENABLE_AND_CLEAR_INTERRUPTS(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT | TW_CONTROL_UNMASK_RESPONSE_INTERRUPT | TW_CONTROL_ENABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x)))
455#define TW_MASK_COMMAND_INTERRUPT(x) (writel(TW_CONTROL_MASK_COMMAND_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
456#define TW_UNMASK_COMMAND_INTERRUPT(x) (writel(TW_CONTROL_UNMASK_COMMAND_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
457#define TW_SOFT_RESET(x) (writel(TW_CONTROL_ISSUE_SOFT_RESET | \
458			TW_CONTROL_CLEAR_HOST_INTERRUPT | \
459			TW_CONTROL_CLEAR_ATTENTION_INTERRUPT | \
460			TW_CONTROL_MASK_COMMAND_INTERRUPT | \
461			TW_CONTROL_MASK_RESPONSE_INTERRUPT | \
462			TW_CONTROL_CLEAR_ERROR_STATUS | \
463			TW_CONTROL_DISABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x)))
464#define TW_PRINTK(h,a,b,c) { \
465if (h) \
466printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \
467else \
468printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \
469}
470#define TW_MAX_LUNS(srl) (srl < TW_FW_SRL_LUNS_SUPPORTED ? 1 : 16)
471#define TW_COMMAND_SIZE (sizeof(dma_addr_t) > 4 ? 5 : 4)
472#define TW_APACHE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 72 : 109)
473#define TW_ESCALADE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 41 : 62)
474#define TW_PADDING_LENGTH (sizeof(dma_addr_t) > 4 ? 8 : 0)
475#define TW_CPU_TO_SGL(x) (sizeof(dma_addr_t) > 4 ? cpu_to_le64(x) : cpu_to_le32(x))
476
477#pragma pack(1)
478
479/* Scatter Gather List Entry */
480typedef struct TAG_TW_SG_Entry {
481	dma_addr_t address;
482	u32 length;
483} TW_SG_Entry;
484
485/* Command Packet */
486typedef struct TW_Command {
487	unsigned char opcode__sgloffset;
488	unsigned char size;
489	unsigned char request_id;
490	unsigned char unit__hostid;
491	/* Second DWORD */
492	unsigned char status;
493	unsigned char flags;
494	union {
495		unsigned short block_count;
496		unsigned short parameter_count;
497	} byte6_offset;
498	union {
499		struct {
500			u32 lba;
501			TW_SG_Entry sgl[TW_ESCALADE_MAX_SGL_LENGTH];
502			dma_addr_t padding;
503		} io;
504		struct {
505			TW_SG_Entry sgl[TW_ESCALADE_MAX_SGL_LENGTH];
506			u32 padding;
507			dma_addr_t padding2;
508		} param;
509	} byte8_offset;
510} TW_Command;
511
512/* Command Packet for 9000+ controllers */
513typedef struct TAG_TW_Command_Apache {
514	unsigned char opcode__reserved;
515	unsigned char unit;
516	unsigned short request_id__lunl;
517	unsigned char status;
518	unsigned char sgl_offset;
519	unsigned short sgl_entries__lunh;
520	unsigned char cdb[16];
521	TW_SG_Entry sg_list[TW_APACHE_MAX_SGL_LENGTH];
522	unsigned char padding[TW_PADDING_LENGTH];
523} TW_Command_Apache;
524
525/* New command packet header */
526typedef struct TAG_TW_Command_Apache_Header {
527	unsigned char sense_data[TW_SENSE_DATA_LENGTH];
528	struct {
529		char reserved[4];
530		unsigned short error;
531		unsigned char padding;
532		unsigned char severity__reserved;
533	} status_block;
534	unsigned char err_specific_desc[98];
535	struct {
536		unsigned char size_header;
537		unsigned short reserved;
538		unsigned char size_sense;
539	} header_desc;
540} TW_Command_Apache_Header;
541
542/* This struct is a union of the 2 command packets */
543typedef struct TAG_TW_Command_Full {
544	TW_Command_Apache_Header header;
545	union {
546		TW_Command oldcommand;
547		TW_Command_Apache newcommand;
548	} command;
549} TW_Command_Full;
550
551/* Initconnection structure */
552typedef struct TAG_TW_Initconnect {
553	unsigned char opcode__reserved;
554	unsigned char size;
555	unsigned char request_id;
556	unsigned char res2;
557	unsigned char status;
558	unsigned char flags;
559	unsigned short message_credits;
560	u32 features;
561	unsigned short fw_srl;
562	unsigned short fw_arch_id;
563	unsigned short fw_branch;
564	unsigned short fw_build;
565	u32 result;
566} TW_Initconnect;
567
568/* Event info structure */
569typedef struct TAG_TW_Event
570{
571	unsigned int sequence_id;
572	unsigned int time_stamp_sec;
573	unsigned short aen_code;
574	unsigned char severity;
575	unsigned char retrieved;
576	unsigned char repeat_count;
577	unsigned char parameter_len;
578	unsigned char parameter_data[98];
579} TW_Event;
580
581typedef struct TAG_TW_Ioctl_Driver_Command {
582	unsigned int control_code;
583	unsigned int status;
584	unsigned int unique_id;
585	unsigned int sequence_id;
586	unsigned int os_specific;
587	unsigned int buffer_length;
588} TW_Ioctl_Driver_Command;
589
590typedef struct TAG_TW_Ioctl_Apache {
591	TW_Ioctl_Driver_Command driver_command;
592        char padding[488];
593	TW_Command_Full firmware_command;
594	char data_buffer[1];
595} TW_Ioctl_Buf_Apache;
596
597/* Lock structure for ioctl get/release lock */
598typedef struct TAG_TW_Lock {
599	unsigned long timeout_msec;
600	unsigned long time_remaining_msec;
601	unsigned long force_flag;
602} TW_Lock;
603
604/* GetParam descriptor */
605typedef struct {
606	unsigned short	table_id;
607	unsigned short	parameter_id;
608	unsigned short	parameter_size_bytes;
609	unsigned short  actual_parameter_size_bytes;
610	unsigned char	data[1];
611} TW_Param_Apache, *PTW_Param_Apache;
612
613/* Response queue */
614typedef union TAG_TW_Response_Queue {
615	u32 response_id;
616	u32 value;
617} TW_Response_Queue;
618
619/* Compatibility information structure */
620typedef struct TAG_TW_Compatibility_Info
621{
622	char driver_version[32];
623	unsigned short working_srl;
624	unsigned short working_branch;
625	unsigned short working_build;
626	unsigned short driver_srl_high;
627	unsigned short driver_branch_high;
628	unsigned short driver_build_high;
629	unsigned short driver_srl_low;
630	unsigned short driver_branch_low;
631	unsigned short driver_build_low;
632	unsigned short fw_on_ctlr_srl;
633	unsigned short fw_on_ctlr_branch;
634	unsigned short fw_on_ctlr_build;
635} TW_Compatibility_Info;
636
637#pragma pack()
638
639typedef struct TAG_TW_Device_Extension {
640	u32                     __iomem *base_addr;
641	unsigned long	       	*generic_buffer_virt[TW_Q_LENGTH];
642	dma_addr_t	       	generic_buffer_phys[TW_Q_LENGTH];
643	TW_Command_Full	       	*command_packet_virt[TW_Q_LENGTH];
644	dma_addr_t		command_packet_phys[TW_Q_LENGTH];
645	struct pci_dev		*tw_pci_dev;
646	struct scsi_cmnd	*srb[TW_Q_LENGTH];
647	unsigned char		free_queue[TW_Q_LENGTH];
648	unsigned char		free_head;
649	unsigned char		free_tail;
650	unsigned char		pending_queue[TW_Q_LENGTH];
651	unsigned char		pending_head;
652	unsigned char		pending_tail;
653	int     		state[TW_Q_LENGTH];
654	unsigned int		posted_request_count;
655	unsigned int		max_posted_request_count;
656	unsigned int	        pending_request_count;
657	unsigned int		max_pending_request_count;
658	unsigned int		max_sgl_entries;
659	unsigned int		sgl_entries;
660	unsigned int		num_resets;
661	unsigned int		sector_count;
662	unsigned int		max_sector_count;
663	unsigned int		aen_count;
664	struct Scsi_Host	*host;
665	long			flags;
666	int			reset_print;
667	TW_Event                *event_queue[TW_Q_LENGTH];
668	unsigned char           error_index;
669	unsigned char		event_queue_wrapped;
670	unsigned int            error_sequence_id;
671	int                     ioctl_sem_lock;
672	u32                     ioctl_msec;
673	int			chrdev_request_id;
674	wait_queue_head_t	ioctl_wqueue;
675	struct mutex		ioctl_lock;
676	char			aen_clobber;
677	TW_Compatibility_Info	tw_compat_info;
678} TW_Device_Extension;
679
680#endif /* _3W_9XXX_H */
681