1/*
2 * Linux ARCnet driver - COM20020 chipset support
3 *
4 * Written 1997 by David Woodhouse.
5 * Written 1994-1999 by Avery Pennarun.
6 * Written 1999 by Martin Mares <mj@ucw.cz>.
7 * Derived from skeleton.c by Donald Becker.
8 *
9 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
10 *  for sponsoring the further development of this driver.
11 *
12 * **********************
13 *
14 * The original copyright of skeleton.c was as follows:
15 *
16 * skeleton.c Written 1993 by Donald Becker.
17 * Copyright 1993 United States Government as represented by the
18 * Director, National Security Agency.  This software may only be used
19 * and distributed according to the terms of the GNU General Public License as
20 * modified by SRC, incorporated herein by reference.
21 *
22 * **********************
23 *
24 * For more details, see drivers/net/arcnet.c
25 *
26 * **********************
27 */
28#include <linux/module.h>
29#include <linux/kernel.h>
30#include <linux/types.h>
31#include <linux/ioport.h>
32#include <linux/slab.h>
33#include <linux/errno.h>
34#include <linux/delay.h>
35#include <linux/netdevice.h>
36#include <linux/init.h>
37#include <linux/arcdevice.h>
38#include <linux/com20020.h>
39
40#include <asm/io.h>
41
42#define VERSION "arcnet: COM20020 chipset support (by David Woodhouse et al.)\n"
43
44static char *clockrates[] =
45{"10 Mb/s", "Reserved", "5 Mb/s",
46 "2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s",
47 "156.25 Kb/s", "Reserved", "Reserved", "Reserved"};
48
49static void com20020_command(struct net_device *dev, int command);
50static int com20020_status(struct net_device *dev);
51static void com20020_setmask(struct net_device *dev, int mask);
52static int com20020_reset(struct net_device *dev, int really_reset);
53static void com20020_copy_to_card(struct net_device *dev, int bufnum,
54				  int offset, void *buf, int count);
55static void com20020_copy_from_card(struct net_device *dev, int bufnum,
56				    int offset, void *buf, int count);
57static void com20020_set_mc_list(struct net_device *dev);
58static void com20020_close(struct net_device *);
59
60static void com20020_copy_from_card(struct net_device *dev, int bufnum,
61				    int offset, void *buf, int count)
62{
63	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
64
65	/* set up the address register */
66	outb((ofs >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
67	outb(ofs & 0xff, _ADDR_LO);
68
69	/* copy the data */
70	TIME("insb", count, insb(_MEMDATA, buf, count));
71}
72
73
74static void com20020_copy_to_card(struct net_device *dev, int bufnum,
75				  int offset, void *buf, int count)
76{
77	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
78
79	/* set up the address register */
80	outb((ofs >> 8) | AUTOINCflag, _ADDR_HI);
81	outb(ofs & 0xff, _ADDR_LO);
82
83	/* copy the data */
84	TIME("outsb", count, outsb(_MEMDATA, buf, count));
85}
86
87
88/* Reset the card and check some basic stuff during the detection stage. */
89int com20020_check(struct net_device *dev)
90{
91	int ioaddr = dev->base_addr, status;
92	struct arcnet_local *lp = dev->priv;
93
94	ARCRESET0;
95	mdelay(RESETtime);
96
97	lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
98	lp->setup2 = (lp->clockm << 4) | 8;
99
100	/* CHECK: should we do this for SOHARD cards ? */
101	/* Enable P1Mode for backplane mode */
102	lp->setup = lp->setup | P1MODE;
103
104	SET_SUBADR(SUB_SETUP1);
105	outb(lp->setup, _XREG);
106
107	if (lp->clockm != 0)
108	{
109		SET_SUBADR(SUB_SETUP2);
110		outb(lp->setup2, _XREG);
111
112		/* must now write the magic "restart operation" command */
113		mdelay(1);
114		outb(0x18, _COMMAND);
115	}
116
117	lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
118	/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
119	SETCONF;
120	outb(0x42, ioaddr + BUS_ALIGN*7);
121
122	status = ASTATUS();
123
124	if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
125		BUGMSG(D_NORMAL, "status invalid (%Xh).\n", status);
126		return -ENODEV;
127	}
128	BUGMSG(D_INIT_REASONS, "status after reset: %X\n", status);
129
130	/* Enable TX */
131	outb(0x39, _CONFIG);
132	outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
133
134	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
135
136	status = ASTATUS();
137	BUGMSG(D_INIT_REASONS, "status after reset acknowledged: %X\n",
138	       status);
139
140	/* Read first location of memory */
141	outb(0 | RDDATAflag | AUTOINCflag, _ADDR_HI);
142	outb(0, _ADDR_LO);
143
144	if ((status = inb(_MEMDATA)) != TESTvalue) {
145		BUGMSG(D_NORMAL, "Signature byte not found (%02Xh != D1h).\n",
146		       status);
147		return -ENODEV;
148	}
149	return 0;
150}
151
152/* Set up the struct net_device associated with this card.  Called after
153 * probing succeeds.
154 */
155int com20020_found(struct net_device *dev, int shared)
156{
157	struct arcnet_local *lp;
158	int ioaddr = dev->base_addr;
159
160	/* Initialize the rest of the device structure. */
161
162	lp = dev->priv;
163
164	lp->hw.owner = THIS_MODULE;
165	lp->hw.command = com20020_command;
166	lp->hw.status = com20020_status;
167	lp->hw.intmask = com20020_setmask;
168	lp->hw.reset = com20020_reset;
169	lp->hw.copy_to_card = com20020_copy_to_card;
170	lp->hw.copy_from_card = com20020_copy_from_card;
171	lp->hw.close = com20020_close;
172
173	dev->set_multicast_list = com20020_set_mc_list;
174
175	if (!dev->dev_addr[0])
176		dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8);
177
178	SET_SUBADR(SUB_SETUP1);
179	outb(lp->setup, _XREG);
180
181	if (lp->card_flags & ARC_CAN_10MBIT)
182	{
183		SET_SUBADR(SUB_SETUP2);
184		outb(lp->setup2, _XREG);
185
186		/* must now write the magic "restart operation" command */
187		mdelay(1);
188		outb(0x18, _COMMAND);
189	}
190
191	lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1;
192	/* Default 0x38 + register: Node ID */
193	SETCONF;
194	outb(dev->dev_addr[0], _XREG);
195
196	/* reserve the irq */
197	if (request_irq(dev->irq, &arcnet_interrupt, shared,
198			"arcnet (COM20020)", dev)) {
199		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
200		return -ENODEV;
201	}
202
203	dev->base_addr = ioaddr;
204
205	BUGMSG(D_NORMAL, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
206	       lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
207
208	if (lp->backplane)
209		BUGMSG(D_NORMAL, "Using backplane mode.\n");
210
211	if (lp->timeout != 3)
212		BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout);
213
214	BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n",
215	       lp->setup >> 1,
216	       clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
217
218	if (register_netdev(dev)) {
219		free_irq(dev->irq, dev);
220		return -EIO;
221	}
222	return 0;
223}
224
225
226/*
227 * Do a hardware reset on the card, and set up necessary registers.
228 *
229 * This should be called as little as possible, because it disrupts the
230 * token on the network (causes a RECON) and requires a significant delay.
231 *
232 * However, it does make sure the card is in a defined state.
233 */
234static int com20020_reset(struct net_device *dev, int really_reset)
235{
236	struct arcnet_local *lp = dev->priv;
237	u_int ioaddr = dev->base_addr;
238	u_char inbyte;
239
240	BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
241		__FILE__,__LINE__,__FUNCTION__,dev,lp,dev->name);
242	BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
243	       dev->name, ASTATUS());
244
245	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
246	lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
247	/* power-up defaults */
248	SETCONF;
249	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
250
251	if (really_reset) {
252		/* reset the card */
253		ARCRESET;
254		mdelay(RESETtime * 2);	/* COM20020 seems to be slower sometimes */
255	}
256	/* clear flags & end reset */
257	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
258	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
259
260	/* verify that the ARCnet signature byte is present */
261	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
262
263	com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
264	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
265	if (inbyte != TESTvalue) {
266		BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
267		BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
268		return 1;
269	}
270	/* enable extended (512-byte) packets */
271	ACOMMAND(CONFIGcmd | EXTconf);
272	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
273
274	/* done!  return success. */
275	return 0;
276}
277
278
279static void com20020_setmask(struct net_device *dev, int mask)
280{
281	u_int ioaddr = dev->base_addr;
282	BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
283	AINTMASK(mask);
284}
285
286
287static void com20020_command(struct net_device *dev, int cmd)
288{
289	u_int ioaddr = dev->base_addr;
290	ACOMMAND(cmd);
291}
292
293
294static int com20020_status(struct net_device *dev)
295{
296	u_int ioaddr = dev->base_addr;
297
298	return ASTATUS() + (ADIAGSTATUS()<<8);
299}
300
301static void com20020_close(struct net_device *dev)
302{
303	struct arcnet_local *lp = dev->priv;
304	int ioaddr = dev->base_addr;
305
306	/* disable transmitter */
307	lp->config &= ~TXENcfg;
308	SETCONF;
309}
310
311static void com20020_set_mc_list(struct net_device *dev)
312{
313	struct arcnet_local *lp = dev->priv;
314	int ioaddr = dev->base_addr;
315
316	if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {	/* Enable promiscuous mode */
317		if (!(lp->setup & PROMISCset))
318			BUGMSG(D_NORMAL, "Setting promiscuous flag...\n");
319		SET_SUBADR(SUB_SETUP1);
320		lp->setup |= PROMISCset;
321		outb(lp->setup, _XREG);
322	} else
323		/* Disable promiscuous mode, use normal mode */
324	{
325		if ((lp->setup & PROMISCset))
326			BUGMSG(D_NORMAL, "Resetting promiscuous flag...\n");
327		SET_SUBADR(SUB_SETUP1);
328		lp->setup &= ~PROMISCset;
329		outb(lp->setup, _XREG);
330	}
331}
332
333#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \
334	defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || defined(CONFIG_ARCNET_COM20020_CS_MODULE)
335EXPORT_SYMBOL(com20020_check);
336EXPORT_SYMBOL(com20020_found);
337#endif
338
339MODULE_LICENSE("GPL");
340
341#ifdef MODULE
342
343int init_module(void)
344{
345	BUGLVL(D_NORMAL) printk(VERSION);
346	return 0;
347}
348
349void cleanup_module(void)
350{
351}
352
353#endif				/* MODULE */
354