1/* 2 * Register definitions for the m88alp01 camera interface. Offsets in bytes 3 * as given in the spec. 4 * 5 * Copyright 2006 One Laptop Per Child Association, Inc. 6 * 7 * Written by Jonathan Corbet, corbet@lwn.net. 8 * 9 * This file may be distributed under the terms of the GNU General 10 * Public License, version 2. 11 */ 12#define REG_Y0BAR 0x00 13#define REG_Y1BAR 0x04 14#define REG_Y2BAR 0x08 15/* ... */ 16 17#define REG_IMGPITCH 0x24 /* Image pitch register */ 18#define IMGP_YP_SHFT 2 /* Y pitch params */ 19#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */ 20#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */ 21#define IMGP_UVP_MASK 0x3ffc0000 22#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */ 23#define IRQ_EOF0 0x00000001 /* End of frame 0 */ 24#define IRQ_EOF1 0x00000002 /* End of frame 1 */ 25#define IRQ_EOF2 0x00000004 /* End of frame 2 */ 26#define IRQ_SOF0 0x00000008 /* Start of frame 0 */ 27#define IRQ_SOF1 0x00000010 /* Start of frame 1 */ 28#define IRQ_SOF2 0x00000020 /* Start of frame 2 */ 29#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */ 30#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */ 31#define IRQ_TWSIR 0x00020000 /* TWSI read */ 32#define IRQ_TWSIE 0x00040000 /* TWSI error */ 33#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE) 34#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2) 35#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW) 36#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */ 37#define REG_IRQSTAT 0x30 /* IRQ status / clear */ 38 39#define REG_IMGSIZE 0x34 /* Image size */ 40#define IMGSZ_V_MASK 0x1fff0000 41#define IMGSZ_V_SHIFT 16 42#define IMGSZ_H_MASK 0x00003fff 43#define REG_IMGOFFSET 0x38 /* IMage offset */ 44 45#define REG_CTRL0 0x3c /* Control 0 */ 46#define C0_ENABLE 0x00000001 /* Makes the whole thing go */ 47 48/* Mask for all the format bits */ 49#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */ 50 51/* RGB ordering */ 52#define C0_RGB4_RGBX 0x00000000 53#define C0_RGB4_XRGB 0x00000004 54#define C0_RGB4_BGRX 0x00000008 55#define C0_RGB4_XBGR 0x0000000c 56#define C0_RGB5_RGGB 0x00000000 57#define C0_RGB5_GRBG 0x00000004 58#define C0_RGB5_GBRG 0x00000008 59#define C0_RGB5_BGGR 0x0000000c 60 61/* Spec has two fields for DIN and DOUT, but they must match, so 62 combine them here. */ 63#define C0_DF_YUV 0x00000000 /* Data is YUV */ 64#define C0_DF_RGB 0x000000a0 /* ... RGB */ 65#define C0_DF_BAYER 0x00000140 /* ... Bayer */ 66/* 8-8-8 must be missing from the below - ask */ 67#define C0_RGBF_565 0x00000000 68#define C0_RGBF_444 0x00000800 69#define C0_RGB_BGR 0x00001000 /* Blue comes first */ 70#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */ 71#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */ 72#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */ 73/* Think that 420 packed must be 111 - ask */ 74#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */ 75#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ 76#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ 77#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ 78#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ 79#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ 80#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ 81#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ 82/* Bayer bits 18,19 if needed */ 83#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ 84#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ 85#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ 86#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ 87#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ 88#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ 89#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ 90 91 92#define REG_CTRL1 0x40 /* Control 1 */ 93#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ 94#define C1_ALPHA_SHFT 20 95#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ 96#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ 97#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ 98#define C1_DMAB_MASK 0x06000000 99#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ 100#define C1_PWRDWN 0x10000000 /* Power down */ 101 102#define REG_CLKCTRL 0x88 /* Clock control */ 103#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */ 104 105#define REG_GPR 0xb4 /* General purpose register. This 106 controls inputs to the power and reset 107 pins on the OV7670 used with OLPC; 108 other deployments could differ. */ 109#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */ 110#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */ 111#define GPR_C1 0x00000002 /* Control 1 value */ 112/* 113 * Control 0 is wired to reset on OLPC machines. For ov7x sensors, 114 * it is active low, for 0v6x, instead, it's active high. What 115 * fun. 116 */ 117#define GPR_C0 0x00000001 /* Control 0 value */ 118 119#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */ 120#define TWSIC0_EN 0x00000001 /* TWSI enable */ 121#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */ 122#define TWSIC0_SID 0x000003fc /* Slave ID */ 123#define TWSIC0_SID_SHIFT 2 124#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */ 125#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */ 126#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */ 127 128#define REG_TWSIC1 0xbc /* TWSI control 1 */ 129#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */ 130#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */ 131#define TWSIC1_ADDR_SHIFT 16 132#define TWSIC1_READ 0x01000000 /* Set for read op */ 133#define TWSIC1_WSTAT 0x02000000 /* Write status */ 134#define TWSIC1_RVALID 0x04000000 /* Read data valid */ 135#define TWSIC1_ERROR 0x08000000 /* Something screwed up */ 136 137 138#define REG_UBAR 0xc4 /* Upper base address register */ 139 140/* 141 * Here's the weird global control registers which are said to live 142 * way up here. 143 */ 144#define REG_GL_CSR 0x3004 /* Control/status register */ 145#define GCSR_SRS 0x00000001 /* SW Reset set */ 146#define GCSR_SRC 0x00000002 /* SW Reset clear */ 147#define GCSR_MRS 0x00000004 /* Master reset set */ 148#define GCSR_MRC 0x00000008 /* HW Reset clear */ 149#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */ 150#define REG_GL_IMASK 0x300c /* Interrupt mask register */ 151#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */ 152 153#define REG_GL_FCR 0x3038 /* GPIO functional control register */ 154#define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */ 155#define REG_GL_GPIOR 0x315c /* GPIO register */ 156#define GGPIO_OUT 0x80000 /* GPIO output */ 157#define GGPIO_VAL 0x00008 /* Output pin value */ 158 159#define REG_LEN REG_GL_IMASK + 4 160 161 162/* 163 * Useful stuff that probably belongs somewhere global. 164 */ 165#define VGA_WIDTH 640 166#define VGA_HEIGHT 480 167