1 /* 2 Driver for Philips tda1004xh OFDM Frontend 3 4 (c) 2004 Andrew de Quincey 5 6 This program is free software; you can redistribute it and/or modify 7 it under the terms of the GNU General Public License as published by 8 the Free Software Foundation; either version 2 of the License, or 9 (at your option) any later version. 10 11 This program is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 15 GNU General Public License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with this program; if not, write to the Free Software 19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 20 21 */ 22 23#ifndef TDA1004X_H 24#define TDA1004X_H 25 26#include <linux/dvb/frontend.h> 27#include <linux/firmware.h> 28 29enum tda10046_xtal { 30 TDA10046_XTAL_4M, 31 TDA10046_XTAL_16M, 32}; 33 34enum tda10046_agc { 35 TDA10046_AGC_DEFAULT, /* original configuration */ 36 TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */ 37 TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */ 38 TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */ 39}; 40 41/* Many (hybrid) boards use GPIO 1 and 3 42 GPIO1 analog - dvb switch 43 GPIO3 firmware eeprom address switch 44*/ 45enum tda10046_gpio { 46 TDA10046_GPTRI = 0x00, /* All GPIOs tristate */ 47 TDA10046_GP00 = 0x40, /* GPIO3=0, GPIO1=0 */ 48 TDA10046_GP01 = 0x42, /* GPIO3=0, GPIO1=1 */ 49 TDA10046_GP10 = 0x48, /* GPIO3=1, GPIO1=0 */ 50 TDA10046_GP11 = 0x4a, /* GPIO3=1, GPIO1=1 */ 51 TDA10046_GP00_I = 0x80, /* GPIO3=0, GPIO1=0, invert in sleep mode*/ 52 TDA10046_GP01_I = 0x82, /* GPIO3=0, GPIO1=1, invert in sleep mode */ 53 TDA10046_GP10_I = 0x88, /* GPIO3=1, GPIO1=0, invert in sleep mode */ 54 TDA10046_GP11_I = 0x8a, /* GPIO3=1, GPIO1=1, invert in sleep mode */ 55}; 56 57enum tda10046_if { 58 TDA10046_FREQ_3617, /* original config, 36,166 MHZ */ 59 TDA10046_FREQ_3613, /* 36,13 MHZ */ 60 TDA10046_FREQ_045, /* low IF, 4.0, 4.5, or 5.0 MHZ */ 61 TDA10046_FREQ_052, /* low IF, 5.1667 MHZ for tda9889 */ 62}; 63 64enum tda10046_tsout { 65 TDA10046_TS_PARALLEL = 0x00, /* parallel transport stream, default */ 66 TDA10046_TS_SERIAL = 0x01, /* serial transport stream */ 67}; 68 69struct tda1004x_config 70{ 71 /* the demodulator's i2c address */ 72 u8 demod_address; 73 74 /* does the "inversion" need inverted? */ 75 u8 invert; 76 77 /* Does the OCLK signal need inverted? */ 78 u8 invert_oclk; 79 80 /* parallel or serial transport stream */ 81 enum tda10046_tsout ts_mode; 82 83 /* Xtal frequency, 4 or 16MHz*/ 84 enum tda10046_xtal xtal_freq; 85 86 /* IF frequency */ 87 enum tda10046_if if_freq; 88 89 /* AGC configuration */ 90 enum tda10046_agc agc_config; 91 92 /* setting of GPIO1 and 3 */ 93 enum tda10046_gpio gpio_config; 94 95 /* slave address and configuration of the tuner */ 96 u8 tuner_address; 97 u8 tuner_config; 98 u8 antenna_switch; 99 100 /* if the board uses another I2c Bridge (tda8290), its address */ 101 u8 i2c_gate; 102 103 /* request firmware for device */ 104 int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); 105}; 106 107enum tda1004x_demod { 108 TDA1004X_DEMOD_TDA10045, 109 TDA1004X_DEMOD_TDA10046, 110}; 111 112struct tda1004x_state { 113 struct i2c_adapter* i2c; 114 const struct tda1004x_config* config; 115 struct dvb_frontend frontend; 116 117 /* private demod data */ 118 enum tda1004x_demod demod_type; 119}; 120 121#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && \ 122 defined(MODULE)) 123extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, 124 struct i2c_adapter* i2c); 125 126extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, 127 struct i2c_adapter* i2c); 128#else 129static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, 130 struct i2c_adapter* i2c) 131{ 132 printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); 133 return NULL; 134} 135static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, 136 struct i2c_adapter* i2c) 137{ 138 printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); 139 return NULL; 140} 141#endif // CONFIG_DVB_TDA1004X 142 143static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) { 144 int r = 0; 145 u8 buf[] = {reg, val}; 146 if (fe->ops.write) 147 r = fe->ops.write(fe, buf, 2); 148 return r; 149} 150 151#endif // TDA1004X_H 152