1/* $Id: nj_s.c,v 1.1.1.1 2007/08/03 18:52:36 Exp $
2 *
3 * This software may be used and distributed according to the terms
4 * of the GNU General Public License, incorporated herein by reference.
5 *
6 */
7
8#include <linux/init.h>
9#include "hisax.h"
10#include "isac.h"
11#include "isdnl1.h"
12#include <linux/pci.h>
13#include <linux/interrupt.h>
14#include <linux/ppp_defs.h>
15#include "netjet.h"
16
17static const char *NETjet_S_revision = "$Revision: 1.1.1.1 $";
18
19static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off)
20{
21	return(5);
22}
23
24static void dummywr(struct IsdnCardState *cs, int chan, u_char off, u_char value)
25{
26}
27
28static irqreturn_t
29netjet_s_interrupt(int intno, void *dev_id)
30{
31	struct IsdnCardState *cs = dev_id;
32	u_char val, s1val, s0val;
33	u_long flags;
34
35	spin_lock_irqsave(&cs->lock, flags);
36	s1val = bytein(cs->hw.njet.base + NETJET_IRQSTAT1);
37	if (!(s1val & NETJET_ISACIRQ)) {
38		val = NETjet_ReadIC(cs, ISAC_ISTA);
39		if (cs->debug & L1_DEB_ISAC)
40			debugl1(cs, "tiger: i1 %x %x", s1val, val);
41		if (val) {
42			isac_interrupt(cs, val);
43			NETjet_WriteIC(cs, ISAC_MASK, 0xFF);
44			NETjet_WriteIC(cs, ISAC_MASK, 0x0);
45		}
46		s1val = 1;
47	} else
48		s1val = 0;
49	/*
50	 * read/write stat0 is better, because lower IRQ rate
51	 * Note the IRQ is on for 125 us if a condition match
52	 * thats long on modern CPU and so the IRQ is reentered
53	 * all the time.
54	 */
55	s0val = bytein(cs->hw.njet.base + NETJET_IRQSTAT0);
56	if ((s0val | s1val)==0) { // shared IRQ
57		spin_unlock_irqrestore(&cs->lock, flags);
58		return IRQ_NONE;
59	}
60	if (s0val)
61		byteout(cs->hw.njet.base + NETJET_IRQSTAT0, s0val);
62	/* start new code 13/07/00 GE */
63	/* set bits in sval to indicate which page is free */
64	if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
65		inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
66		/* the 2nd write page is free */
67		s0val = 0x08;
68	else	/* the 1st write page is free */
69		s0val = 0x04;
70	if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
71		inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
72		/* the 2nd read page is free */
73		s0val |= 0x02;
74	else	/* the 1st read page is free */
75		s0val |= 0x01;
76	if (s0val != cs->hw.njet.last_is0) /* we have a DMA interrupt */
77	{
78		if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
79			printk(KERN_WARNING "nj LOCK_ATOMIC s0val %x->%x\n",
80				cs->hw.njet.last_is0, s0val);
81			spin_unlock_irqrestore(&cs->lock, flags);
82			return IRQ_HANDLED;
83		}
84		cs->hw.njet.irqstat0 = s0val;
85		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) !=
86			(cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
87			/* we have a read dma int */
88			read_tiger(cs);
89		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
90			(cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
91			/* we have a write dma int */
92			write_tiger(cs);
93		/* end new code 13/07/00 GE */
94		test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
95	}
96	spin_unlock_irqrestore(&cs->lock, flags);
97	return IRQ_HANDLED;
98}
99
100static void
101reset_netjet_s(struct IsdnCardState *cs)
102{
103	cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
104	byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
105	mdelay(10);
106	/* now edge triggered for TJ320 GE 13/07/00 */
107	/* see comment in IRQ function */
108	if (cs->subtyp) /* TJ320 */
109		cs->hw.njet.ctrl_reg = 0x40;  /* Reset Off and status read clear */
110	else
111		cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
112	byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
113	mdelay(10);
114	cs->hw.njet.auxd = 0;
115	cs->hw.njet.dmactrl = 0;
116	byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
117	byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
118	byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
119}
120
121static int
122NETjet_S_card_msg(struct IsdnCardState *cs, int mt, void *arg)
123{
124	u_long flags;
125
126	switch (mt) {
127		case CARD_RESET:
128			spin_lock_irqsave(&cs->lock, flags);
129			reset_netjet_s(cs);
130			spin_unlock_irqrestore(&cs->lock, flags);
131			return(0);
132		case CARD_RELEASE:
133			release_io_netjet(cs);
134			return(0);
135		case CARD_INIT:
136			reset_netjet_s(cs);
137			inittiger(cs);
138			spin_lock_irqsave(&cs->lock, flags);
139			clear_pending_isac_ints(cs);
140			initisac(cs);
141			/* Reenable all IRQ */
142			cs->writeisac(cs, ISAC_MASK, 0);
143			spin_unlock_irqrestore(&cs->lock, flags);
144			return(0);
145		case CARD_TEST:
146			return(0);
147	}
148	return(0);
149}
150
151static struct pci_dev *dev_netjet __devinitdata = NULL;
152
153int __devinit
154setup_netjet_s(struct IsdnCard *card)
155{
156	int bytecnt,cfg;
157	struct IsdnCardState *cs = card->cs;
158	char tmp[64];
159
160#ifdef __BIG_ENDIAN
161#error "not running on big endian machines now"
162#endif
163	strcpy(tmp, NETjet_S_revision);
164	printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
165	if (cs->typ != ISDN_CTYPE_NETJET_S)
166		return(0);
167	test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
168
169#ifdef CONFIG_PCI
170
171	for ( ;; )
172	{
173		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
174			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
175			if (pci_enable_device(dev_netjet))
176				return(0);
177			pci_set_master(dev_netjet);
178			cs->irq = dev_netjet->irq;
179			if (!cs->irq) {
180				printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
181				return(0);
182			}
183			cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
184			if (!cs->hw.njet.base) {
185				printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
186				return(0);
187			}
188			/* the TJ300 and TJ320 must be detected, the IRQ handling is different
189			 * unfortunatly the chips use the same device ID, but the TJ320 has
190			 * the bit20 in status PCI cfg register set
191			 */
192			pci_read_config_dword(dev_netjet, 0x04, &cfg);
193			if (cfg & 0x00100000)
194				cs->subtyp = 1; /* TJ320 */
195			else
196				cs->subtyp = 0; /* TJ300 */
197			/* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
198			if ((dev_netjet->subsystem_vendor == 0x55) &&
199				(dev_netjet->subsystem_device == 0x02)) {
200				printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
201				printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
202				return(0);
203			}
204			/* end new code */
205		} else {
206			printk(KERN_WARNING "NETjet-S: No PCI card found\n");
207			return(0);
208		}
209
210		cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
211		cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
212
213		cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
214		byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
215		mdelay(10);
216
217		cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
218		byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
219		mdelay(10);
220
221		cs->hw.njet.auxd = 0xC0;
222		cs->hw.njet.dmactrl = 0;
223
224		byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
225		byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
226		byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
227
228		switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
229		{
230			case 0 :
231				break;
232
233			case 3 :
234				printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
235				continue;
236
237			default :
238				printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
239				return 0;
240                }
241                break;
242	}
243#else
244
245	printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
246	printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
247	return (0);
248
249#endif /* CONFIG_PCI */
250
251	bytecnt = 256;
252
253	printk(KERN_INFO
254		"NETjet-S: %s card configured at %#lx IRQ %d\n",
255		cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
256	if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
257		printk(KERN_WARNING
258		       "HiSax: %s config port %#lx-%#lx already in use\n",
259		       CardType[card->typ],
260		       cs->hw.njet.base,
261		       cs->hw.njet.base + bytecnt);
262		return (0);
263	}
264	cs->readisac  = &NETjet_ReadIC;
265	cs->writeisac = &NETjet_WriteIC;
266	cs->readisacfifo  = &NETjet_ReadICfifo;
267	cs->writeisacfifo = &NETjet_WriteICfifo;
268	cs->BC_Read_Reg  = &dummyrr;
269	cs->BC_Write_Reg = &dummywr;
270	cs->BC_Send_Data = &netjet_fill_dma;
271	setup_isac(cs);
272	cs->cardmsg = &NETjet_S_card_msg;
273	cs->irq_func = &netjet_s_interrupt;
274	cs->irq_flags |= IRQF_SHARED;
275	ISACVersion(cs, "NETjet-S:");
276	return (1);
277}
278