1/* 2 * lm80.c - From lm_sensors, Linux kernel modules for hardware 3 * monitoring 4 * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> 5 * and Philip Edelbrock <phil@netroedge.com> 6 * 7 * Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24#include <linux/module.h> 25#include <linux/init.h> 26#include <linux/slab.h> 27#include <linux/jiffies.h> 28#include <linux/i2c.h> 29#include <linux/hwmon.h> 30#include <linux/err.h> 31#include <linux/mutex.h> 32 33/* Addresses to scan */ 34static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 35 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; 36 37/* Insmod parameters */ 38I2C_CLIENT_INSMOD_1(lm80); 39 40/* Many LM80 constants specified below */ 41 42/* The LM80 registers */ 43#define LM80_REG_IN_MAX(nr) (0x2a + (nr) * 2) 44#define LM80_REG_IN_MIN(nr) (0x2b + (nr) * 2) 45#define LM80_REG_IN(nr) (0x20 + (nr)) 46 47#define LM80_REG_FAN1 0x28 48#define LM80_REG_FAN2 0x29 49#define LM80_REG_FAN_MIN(nr) (0x3b + (nr)) 50 51#define LM80_REG_TEMP 0x27 52#define LM80_REG_TEMP_HOT_MAX 0x38 53#define LM80_REG_TEMP_HOT_HYST 0x39 54#define LM80_REG_TEMP_OS_MAX 0x3a 55#define LM80_REG_TEMP_OS_HYST 0x3b 56 57#define LM80_REG_CONFIG 0x00 58#define LM80_REG_ALARM1 0x01 59#define LM80_REG_ALARM2 0x02 60#define LM80_REG_MASK1 0x03 61#define LM80_REG_MASK2 0x04 62#define LM80_REG_FANDIV 0x05 63#define LM80_REG_RES 0x06 64 65 66/* Conversions. Rounding and limit checking is only done on the TO_REG 67 variants. Note that you should be a bit careful with which arguments 68 these macros are called: arguments may be evaluated more than once. 69 Fixing this is just not worth it. */ 70 71#define IN_TO_REG(val) (SENSORS_LIMIT(((val)+5)/10,0,255)) 72#define IN_FROM_REG(val) ((val)*10) 73 74static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div) 75{ 76 if (rpm == 0) 77 return 255; 78 rpm = SENSORS_LIMIT(rpm, 1, 1000000); 79 return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254); 80} 81 82#define FAN_FROM_REG(val,div) ((val)==0?-1:\ 83 (val)==255?0:1350000/((div)*(val))) 84 85static inline long TEMP_FROM_REG(u16 temp) 86{ 87 long res; 88 89 temp >>= 4; 90 if (temp < 0x0800) 91 res = 625 * (long) temp; 92 else 93 res = ((long) temp - 0x01000) * 625; 94 95 return res / 10; 96} 97 98#define TEMP_LIMIT_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) 99 100#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val)<0?\ 101 ((val)-500)/1000:((val)+500)/1000,0,255) 102 103#define DIV_FROM_REG(val) (1 << (val)) 104 105/* 106 * Client data (each client gets its own) 107 */ 108 109struct lm80_data { 110 struct i2c_client client; 111 struct class_device *class_dev; 112 struct mutex update_lock; 113 char valid; /* !=0 if following fields are valid */ 114 unsigned long last_updated; /* In jiffies */ 115 116 u8 in[7]; /* Register value */ 117 u8 in_max[7]; /* Register value */ 118 u8 in_min[7]; /* Register value */ 119 u8 fan[2]; /* Register value */ 120 u8 fan_min[2]; /* Register value */ 121 u8 fan_div[2]; /* Register encoding, shifted right */ 122 u16 temp; /* Register values, shifted right */ 123 u8 temp_hot_max; /* Register value */ 124 u8 temp_hot_hyst; /* Register value */ 125 u8 temp_os_max; /* Register value */ 126 u8 temp_os_hyst; /* Register value */ 127 u16 alarms; /* Register encoding, combined */ 128}; 129 130/* 131 * Functions declaration 132 */ 133 134static int lm80_attach_adapter(struct i2c_adapter *adapter); 135static int lm80_detect(struct i2c_adapter *adapter, int address, int kind); 136static void lm80_init_client(struct i2c_client *client); 137static int lm80_detach_client(struct i2c_client *client); 138static struct lm80_data *lm80_update_device(struct device *dev); 139static int lm80_read_value(struct i2c_client *client, u8 reg); 140static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); 141 142/* 143 * Driver data (common to all clients) 144 */ 145 146static struct i2c_driver lm80_driver = { 147 .driver = { 148 .name = "lm80", 149 }, 150 .id = I2C_DRIVERID_LM80, 151 .attach_adapter = lm80_attach_adapter, 152 .detach_client = lm80_detach_client, 153}; 154 155/* 156 * Sysfs stuff 157 */ 158 159#define show_in(suffix, value) \ 160static ssize_t show_in_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ 161{ \ 162 struct lm80_data *data = lm80_update_device(dev); \ 163 return sprintf(buf, "%d\n", IN_FROM_REG(data->value)); \ 164} 165show_in(min0, in_min[0]); 166show_in(min1, in_min[1]); 167show_in(min2, in_min[2]); 168show_in(min3, in_min[3]); 169show_in(min4, in_min[4]); 170show_in(min5, in_min[5]); 171show_in(min6, in_min[6]); 172show_in(max0, in_max[0]); 173show_in(max1, in_max[1]); 174show_in(max2, in_max[2]); 175show_in(max3, in_max[3]); 176show_in(max4, in_max[4]); 177show_in(max5, in_max[5]); 178show_in(max6, in_max[6]); 179show_in(input0, in[0]); 180show_in(input1, in[1]); 181show_in(input2, in[2]); 182show_in(input3, in[3]); 183show_in(input4, in[4]); 184show_in(input5, in[5]); 185show_in(input6, in[6]); 186 187#define set_in(suffix, value, reg) \ 188static ssize_t set_in_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ 189 size_t count) \ 190{ \ 191 struct i2c_client *client = to_i2c_client(dev); \ 192 struct lm80_data *data = i2c_get_clientdata(client); \ 193 long val = simple_strtol(buf, NULL, 10); \ 194 \ 195 mutex_lock(&data->update_lock);\ 196 data->value = IN_TO_REG(val); \ 197 lm80_write_value(client, reg, data->value); \ 198 mutex_unlock(&data->update_lock);\ 199 return count; \ 200} 201set_in(min0, in_min[0], LM80_REG_IN_MIN(0)); 202set_in(min1, in_min[1], LM80_REG_IN_MIN(1)); 203set_in(min2, in_min[2], LM80_REG_IN_MIN(2)); 204set_in(min3, in_min[3], LM80_REG_IN_MIN(3)); 205set_in(min4, in_min[4], LM80_REG_IN_MIN(4)); 206set_in(min5, in_min[5], LM80_REG_IN_MIN(5)); 207set_in(min6, in_min[6], LM80_REG_IN_MIN(6)); 208set_in(max0, in_max[0], LM80_REG_IN_MAX(0)); 209set_in(max1, in_max[1], LM80_REG_IN_MAX(1)); 210set_in(max2, in_max[2], LM80_REG_IN_MAX(2)); 211set_in(max3, in_max[3], LM80_REG_IN_MAX(3)); 212set_in(max4, in_max[4], LM80_REG_IN_MAX(4)); 213set_in(max5, in_max[5], LM80_REG_IN_MAX(5)); 214set_in(max6, in_max[6], LM80_REG_IN_MAX(6)); 215 216#define show_fan(suffix, value, div) \ 217static ssize_t show_fan_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ 218{ \ 219 struct lm80_data *data = lm80_update_device(dev); \ 220 return sprintf(buf, "%d\n", FAN_FROM_REG(data->value, \ 221 DIV_FROM_REG(data->div))); \ 222} 223show_fan(min1, fan_min[0], fan_div[0]); 224show_fan(min2, fan_min[1], fan_div[1]); 225show_fan(input1, fan[0], fan_div[0]); 226show_fan(input2, fan[1], fan_div[1]); 227 228#define show_fan_div(suffix, value) \ 229static ssize_t show_fan_div##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ 230{ \ 231 struct lm80_data *data = lm80_update_device(dev); \ 232 return sprintf(buf, "%d\n", DIV_FROM_REG(data->value)); \ 233} 234show_fan_div(1, fan_div[0]); 235show_fan_div(2, fan_div[1]); 236 237#define set_fan(suffix, value, reg, div) \ 238static ssize_t set_fan_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ 239 size_t count) \ 240{ \ 241 struct i2c_client *client = to_i2c_client(dev); \ 242 struct lm80_data *data = i2c_get_clientdata(client); \ 243 long val = simple_strtoul(buf, NULL, 10); \ 244 \ 245 mutex_lock(&data->update_lock);\ 246 data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \ 247 lm80_write_value(client, reg, data->value); \ 248 mutex_unlock(&data->update_lock);\ 249 return count; \ 250} 251set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]); 252set_fan(min2, fan_min[1], LM80_REG_FAN_MIN(2), fan_div[1]); 253 254/* Note: we save and restore the fan minimum here, because its value is 255 determined in part by the fan divisor. This follows the principle of 256 least surprise; the user doesn't expect the fan minimum to change just 257 because the divisor changed. */ 258static ssize_t set_fan_div(struct device *dev, const char *buf, 259 size_t count, int nr) 260{ 261 struct i2c_client *client = to_i2c_client(dev); 262 struct lm80_data *data = i2c_get_clientdata(client); 263 unsigned long min, val = simple_strtoul(buf, NULL, 10); 264 u8 reg; 265 266 /* Save fan_min */ 267 mutex_lock(&data->update_lock); 268 min = FAN_FROM_REG(data->fan_min[nr], 269 DIV_FROM_REG(data->fan_div[nr])); 270 271 switch (val) { 272 case 1: data->fan_div[nr] = 0; break; 273 case 2: data->fan_div[nr] = 1; break; 274 case 4: data->fan_div[nr] = 2; break; 275 case 8: data->fan_div[nr] = 3; break; 276 default: 277 dev_err(&client->dev, "fan_div value %ld not " 278 "supported. Choose one of 1, 2, 4 or 8!\n", val); 279 mutex_unlock(&data->update_lock); 280 return -EINVAL; 281 } 282 283 reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1)))) 284 | (data->fan_div[nr] << (2 * (nr + 1))); 285 lm80_write_value(client, LM80_REG_FANDIV, reg); 286 287 /* Restore fan_min */ 288 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); 289 lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]); 290 mutex_unlock(&data->update_lock); 291 292 return count; 293} 294 295#define set_fan_div(number) \ 296static ssize_t set_fan_div##number(struct device *dev, struct device_attribute *attr, const char *buf, \ 297 size_t count) \ 298{ \ 299 return set_fan_div(dev, buf, count, number - 1); \ 300} 301set_fan_div(1); 302set_fan_div(2); 303 304static ssize_t show_temp_input1(struct device *dev, struct device_attribute *attr, char *buf) 305{ 306 struct lm80_data *data = lm80_update_device(dev); 307 return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp)); 308} 309 310#define show_temp(suffix, value) \ 311static ssize_t show_temp_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ 312{ \ 313 struct lm80_data *data = lm80_update_device(dev); \ 314 return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \ 315} 316show_temp(hot_max, temp_hot_max); 317show_temp(hot_hyst, temp_hot_hyst); 318show_temp(os_max, temp_os_max); 319show_temp(os_hyst, temp_os_hyst); 320 321#define set_temp(suffix, value, reg) \ 322static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ 323 size_t count) \ 324{ \ 325 struct i2c_client *client = to_i2c_client(dev); \ 326 struct lm80_data *data = i2c_get_clientdata(client); \ 327 long val = simple_strtoul(buf, NULL, 10); \ 328 \ 329 mutex_lock(&data->update_lock); \ 330 data->value = TEMP_LIMIT_TO_REG(val); \ 331 lm80_write_value(client, reg, data->value); \ 332 mutex_unlock(&data->update_lock); \ 333 return count; \ 334} 335set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX); 336set_temp(hot_hyst, temp_hot_hyst, LM80_REG_TEMP_HOT_HYST); 337set_temp(os_max, temp_os_max, LM80_REG_TEMP_OS_MAX); 338set_temp(os_hyst, temp_os_hyst, LM80_REG_TEMP_OS_HYST); 339 340static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) 341{ 342 struct lm80_data *data = lm80_update_device(dev); 343 return sprintf(buf, "%u\n", data->alarms); 344} 345 346static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0); 347static DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min1, set_in_min1); 348static DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min2, set_in_min2); 349static DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min3, set_in_min3); 350static DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min4, set_in_min4); 351static DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min5, set_in_min5); 352static DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min6, set_in_min6); 353static DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max0, set_in_max0); 354static DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max1, set_in_max1); 355static DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max2, set_in_max2); 356static DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max3, set_in_max3); 357static DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max4, set_in_max4); 358static DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max5, set_in_max5); 359static DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max6, set_in_max6); 360static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL); 361static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL); 362static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL); 363static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL); 364static DEVICE_ATTR(in4_input, S_IRUGO, show_in_input4, NULL); 365static DEVICE_ATTR(in5_input, S_IRUGO, show_in_input5, NULL); 366static DEVICE_ATTR(in6_input, S_IRUGO, show_in_input6, NULL); 367static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min1, 368 set_fan_min1); 369static DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min2, 370 set_fan_min2); 371static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL); 372static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL); 373static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div1, set_fan_div1); 374static DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div2, set_fan_div2); 375static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); 376static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max, 377 set_temp_hot_max); 378static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst, 379 set_temp_hot_hyst); 380static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max, 381 set_temp_os_max); 382static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst, 383 set_temp_os_hyst); 384static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); 385 386/* 387 * Real code 388 */ 389 390static int lm80_attach_adapter(struct i2c_adapter *adapter) 391{ 392 if (!(adapter->class & I2C_CLASS_HWMON)) 393 return 0; 394 return i2c_probe(adapter, &addr_data, lm80_detect); 395} 396 397static struct attribute *lm80_attributes[] = { 398 &dev_attr_in0_min.attr, 399 &dev_attr_in1_min.attr, 400 &dev_attr_in2_min.attr, 401 &dev_attr_in3_min.attr, 402 &dev_attr_in4_min.attr, 403 &dev_attr_in5_min.attr, 404 &dev_attr_in6_min.attr, 405 &dev_attr_in0_max.attr, 406 &dev_attr_in1_max.attr, 407 &dev_attr_in2_max.attr, 408 &dev_attr_in3_max.attr, 409 &dev_attr_in4_max.attr, 410 &dev_attr_in5_max.attr, 411 &dev_attr_in6_max.attr, 412 &dev_attr_in0_input.attr, 413 &dev_attr_in1_input.attr, 414 &dev_attr_in2_input.attr, 415 &dev_attr_in3_input.attr, 416 &dev_attr_in4_input.attr, 417 &dev_attr_in5_input.attr, 418 &dev_attr_in6_input.attr, 419 &dev_attr_fan1_min.attr, 420 &dev_attr_fan2_min.attr, 421 &dev_attr_fan1_input.attr, 422 &dev_attr_fan2_input.attr, 423 &dev_attr_fan1_div.attr, 424 &dev_attr_fan2_div.attr, 425 &dev_attr_temp1_input.attr, 426 &dev_attr_temp1_max.attr, 427 &dev_attr_temp1_max_hyst.attr, 428 &dev_attr_temp1_crit.attr, 429 &dev_attr_temp1_crit_hyst.attr, 430 &dev_attr_alarms.attr, 431 432 NULL 433}; 434 435static const struct attribute_group lm80_group = { 436 .attrs = lm80_attributes, 437}; 438 439static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) 440{ 441 int i, cur; 442 struct i2c_client *new_client; 443 struct lm80_data *data; 444 int err = 0; 445 const char *name; 446 447 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 448 goto exit; 449 450 /* OK. For now, we presume we have a valid client. We now create the 451 client structure, even though we cannot fill it completely yet. 452 But it allows us to access lm80_{read,write}_value. */ 453 if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) { 454 err = -ENOMEM; 455 goto exit; 456 } 457 458 new_client = &data->client; 459 i2c_set_clientdata(new_client, data); 460 new_client->addr = address; 461 new_client->adapter = adapter; 462 new_client->driver = &lm80_driver; 463 new_client->flags = 0; 464 465 /* Now, we do the remaining detection. It is lousy. */ 466 if (lm80_read_value(new_client, LM80_REG_ALARM2) & 0xc0) 467 goto error_free; 468 for (i = 0x2a; i <= 0x3d; i++) { 469 cur = i2c_smbus_read_byte_data(new_client, i); 470 if ((i2c_smbus_read_byte_data(new_client, i + 0x40) != cur) 471 || (i2c_smbus_read_byte_data(new_client, i + 0x80) != cur) 472 || (i2c_smbus_read_byte_data(new_client, i + 0xc0) != cur)) 473 goto error_free; 474 } 475 476 /* Determine the chip type - only one kind supported! */ 477 kind = lm80; 478 name = "lm80"; 479 480 /* Fill in the remaining client fields and put it into the global list */ 481 strlcpy(new_client->name, name, I2C_NAME_SIZE); 482 data->valid = 0; 483 mutex_init(&data->update_lock); 484 485 /* Tell the I2C layer a new client has arrived */ 486 if ((err = i2c_attach_client(new_client))) 487 goto error_free; 488 489 /* Initialize the LM80 chip */ 490 lm80_init_client(new_client); 491 492 /* A few vars need to be filled upon startup */ 493 data->fan_min[0] = lm80_read_value(new_client, LM80_REG_FAN_MIN(1)); 494 data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2)); 495 496 /* Register sysfs hooks */ 497 if ((err = sysfs_create_group(&new_client->dev.kobj, &lm80_group))) 498 goto error_detach; 499 500 data->class_dev = hwmon_device_register(&new_client->dev); 501 if (IS_ERR(data->class_dev)) { 502 err = PTR_ERR(data->class_dev); 503 goto error_remove; 504 } 505 506 return 0; 507 508error_remove: 509 sysfs_remove_group(&new_client->dev.kobj, &lm80_group); 510error_detach: 511 i2c_detach_client(new_client); 512error_free: 513 kfree(data); 514exit: 515 return err; 516} 517 518static int lm80_detach_client(struct i2c_client *client) 519{ 520 struct lm80_data *data = i2c_get_clientdata(client); 521 int err; 522 523 hwmon_device_unregister(data->class_dev); 524 sysfs_remove_group(&client->dev.kobj, &lm80_group); 525 if ((err = i2c_detach_client(client))) 526 return err; 527 528 kfree(data); 529 return 0; 530} 531 532static int lm80_read_value(struct i2c_client *client, u8 reg) 533{ 534 return i2c_smbus_read_byte_data(client, reg); 535} 536 537static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value) 538{ 539 return i2c_smbus_write_byte_data(client, reg, value); 540} 541 542/* Called when we have found a new LM80. */ 543static void lm80_init_client(struct i2c_client *client) 544{ 545 /* Reset all except Watchdog values and last conversion values 546 This sets fan-divs to 2, among others. This makes most other 547 initializations unnecessary */ 548 lm80_write_value(client, LM80_REG_CONFIG, 0x80); 549 /* Set 11-bit temperature resolution */ 550 lm80_write_value(client, LM80_REG_RES, 0x08); 551 552 /* Start monitoring */ 553 lm80_write_value(client, LM80_REG_CONFIG, 0x01); 554} 555 556static struct lm80_data *lm80_update_device(struct device *dev) 557{ 558 struct i2c_client *client = to_i2c_client(dev); 559 struct lm80_data *data = i2c_get_clientdata(client); 560 int i; 561 562 mutex_lock(&data->update_lock); 563 564 if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { 565 dev_dbg(&client->dev, "Starting lm80 update\n"); 566 for (i = 0; i <= 6; i++) { 567 data->in[i] = 568 lm80_read_value(client, LM80_REG_IN(i)); 569 data->in_min[i] = 570 lm80_read_value(client, LM80_REG_IN_MIN(i)); 571 data->in_max[i] = 572 lm80_read_value(client, LM80_REG_IN_MAX(i)); 573 } 574 data->fan[0] = lm80_read_value(client, LM80_REG_FAN1); 575 data->fan_min[0] = 576 lm80_read_value(client, LM80_REG_FAN_MIN(1)); 577 data->fan[1] = lm80_read_value(client, LM80_REG_FAN2); 578 data->fan_min[1] = 579 lm80_read_value(client, LM80_REG_FAN_MIN(2)); 580 581 data->temp = 582 (lm80_read_value(client, LM80_REG_TEMP) << 8) | 583 (lm80_read_value(client, LM80_REG_RES) & 0xf0); 584 data->temp_os_max = 585 lm80_read_value(client, LM80_REG_TEMP_OS_MAX); 586 data->temp_os_hyst = 587 lm80_read_value(client, LM80_REG_TEMP_OS_HYST); 588 data->temp_hot_max = 589 lm80_read_value(client, LM80_REG_TEMP_HOT_MAX); 590 data->temp_hot_hyst = 591 lm80_read_value(client, LM80_REG_TEMP_HOT_HYST); 592 593 i = lm80_read_value(client, LM80_REG_FANDIV); 594 data->fan_div[0] = (i >> 2) & 0x03; 595 data->fan_div[1] = (i >> 4) & 0x03; 596 data->alarms = lm80_read_value(client, LM80_REG_ALARM1) + 597 (lm80_read_value(client, LM80_REG_ALARM2) << 8); 598 data->last_updated = jiffies; 599 data->valid = 1; 600 } 601 602 mutex_unlock(&data->update_lock); 603 604 return data; 605} 606 607static int __init sensors_lm80_init(void) 608{ 609 return i2c_add_driver(&lm80_driver); 610} 611 612static void __exit sensors_lm80_exit(void) 613{ 614 i2c_del_driver(&lm80_driver); 615} 616 617MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " 618 "Philip Edelbrock <phil@netroedge.com>"); 619MODULE_DESCRIPTION("LM80 driver"); 620MODULE_LICENSE("GPL"); 621 622module_init(sensors_lm80_init); 623module_exit(sensors_lm80_exit); 624