1/* 2 * pata_netcell.c - Netcell PATA driver 3 * 4 * (c) 2006 Red Hat <alan@redhat.com> 5 */ 6 7#include <linux/kernel.h> 8#include <linux/module.h> 9#include <linux/pci.h> 10#include <linux/init.h> 11#include <linux/blkdev.h> 12#include <linux/delay.h> 13#include <linux/device.h> 14#include <scsi/scsi_host.h> 15#include <linux/libata.h> 16#include <linux/ata.h> 17 18#define DRV_NAME "pata_netcell" 19#define DRV_VERSION "0.1.7" 20 21/* No PIO or DMA methods needed for this device */ 22 23static struct scsi_host_template netcell_sht = { 24 .module = THIS_MODULE, 25 .name = DRV_NAME, 26 .ioctl = ata_scsi_ioctl, 27 .queuecommand = ata_scsi_queuecmd, 28 .can_queue = ATA_DEF_QUEUE, 29 .this_id = ATA_SHT_THIS_ID, 30 .sg_tablesize = LIBATA_MAX_PRD, 31 .cmd_per_lun = ATA_SHT_CMD_PER_LUN, 32 .emulated = ATA_SHT_EMULATED, 33 .use_clustering = ATA_SHT_USE_CLUSTERING, 34 .proc_name = DRV_NAME, 35 .dma_boundary = ATA_DMA_BOUNDARY, 36 .slave_configure = ata_scsi_slave_config, 37 .slave_destroy = ata_scsi_slave_destroy, 38 /* Use standard CHS mapping rules */ 39 .bios_param = ata_std_bios_param, 40}; 41 42static const struct ata_port_operations netcell_ops = { 43 .port_disable = ata_port_disable, 44 45 /* Task file is PCI ATA format, use helpers */ 46 .tf_load = ata_tf_load, 47 .tf_read = ata_tf_read, 48 .check_status = ata_check_status, 49 .exec_command = ata_exec_command, 50 .dev_select = ata_std_dev_select, 51 52 .freeze = ata_bmdma_freeze, 53 .thaw = ata_bmdma_thaw, 54 .error_handler = ata_bmdma_error_handler, 55 .post_internal_cmd = ata_bmdma_post_internal_cmd, 56 .cable_detect = ata_cable_80wire, 57 58 /* BMDMA handling is PCI ATA format, use helpers */ 59 .bmdma_setup = ata_bmdma_setup, 60 .bmdma_start = ata_bmdma_start, 61 .bmdma_stop = ata_bmdma_stop, 62 .bmdma_status = ata_bmdma_status, 63 .qc_prep = ata_qc_prep, 64 .qc_issue = ata_qc_issue_prot, 65 .data_xfer = ata_data_xfer, 66 67 /* IRQ-related hooks */ 68 .irq_handler = ata_interrupt, 69 .irq_clear = ata_bmdma_irq_clear, 70 .irq_on = ata_irq_on, 71 .irq_ack = ata_irq_ack, 72 73 /* Generic PATA PCI ATA helpers */ 74 .port_start = ata_port_start, 75}; 76 77 78/** 79 * netcell_init_one - Register Netcell ATA PCI device with kernel services 80 * @pdev: PCI device to register 81 * @ent: Entry in netcell_pci_tbl matching with @pdev 82 * 83 * Called from kernel PCI layer. 84 * 85 * LOCKING: 86 * Inherited from PCI layer (may sleep). 87 * 88 * RETURNS: 89 * Zero on success, or -ERRNO value. 90 */ 91 92static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) 93{ 94 static int printed_version; 95 static const struct ata_port_info info = { 96 .sht = &netcell_sht, 97 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, 98 /* Actually we don't really care about these as the 99 firmware deals with it */ 100 .pio_mask = 0x1f, /* pio0-4 */ 101 .mwdma_mask = 0x07, /* mwdma0-2 */ 102 .udma_mask = 0x3f, /* UDMA 133 */ 103 .port_ops = &netcell_ops, 104 }; 105 const struct ata_port_info *port_info[] = { &info, NULL }; 106 107 if (!printed_version++) 108 dev_printk(KERN_DEBUG, &pdev->dev, 109 "version " DRV_VERSION "\n"); 110 111 /* Any chip specific setup/optimisation/messages here */ 112 ata_pci_clear_simplex(pdev); 113 114 /* And let the library code do the work */ 115 return ata_pci_init_one(pdev, port_info); 116} 117 118static const struct pci_device_id netcell_pci_tbl[] = { 119 { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), }, 120 121 { } /* terminate list */ 122}; 123 124static struct pci_driver netcell_pci_driver = { 125 .name = DRV_NAME, 126 .id_table = netcell_pci_tbl, 127 .probe = netcell_init_one, 128 .remove = ata_pci_remove_one, 129#ifdef CONFIG_PM 130 .suspend = ata_pci_device_suspend, 131 .resume = ata_pci_device_resume, 132#endif 133}; 134 135static int __init netcell_init(void) 136{ 137 return pci_register_driver(&netcell_pci_driver); 138} 139 140static void __exit netcell_exit(void) 141{ 142 pci_unregister_driver(&netcell_pci_driver); 143} 144 145module_init(netcell_init); 146module_exit(netcell_exit); 147 148MODULE_AUTHOR("Alan Cox"); 149MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); 150MODULE_LICENSE("GPL"); 151MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); 152MODULE_VERSION(DRV_VERSION); 153