1/* 2 * include/asm-v850/rte_cb.c -- Midas lab RTE-CB series of evaluation boards 3 * 4 * Copyright (C) 2001,02,03 NEC Electronics Corporation 5 * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> 6 * 7 * This file is subject to the terms and conditions of the GNU General 8 * Public License. See the file COPYING in the main directory of this 9 * archive for more details. 10 * 11 * Written by Miles Bader <miles@gnu.org> 12 */ 13 14#include <linux/init.h> 15#include <linux/irq.h> 16#include <linux/fs.h> 17#include <linux/module.h> 18#include <linux/kernel.h> 19 20#include <asm/machdep.h> 21#include <asm/v850e_uart.h> 22 23#include "mach.h" 24 25static void led_tick (void); 26 27/* LED access routines. */ 28extern unsigned read_leds (int pos, char *buf, int len); 29extern unsigned write_leds (int pos, const char *buf, int len); 30 31#ifdef CONFIG_RTE_CB_MULTI 32extern void multi_init (void); 33#endif 34 35 36void __init rte_cb_early_init (void) 37{ 38 v850e_intc_disable_irqs (); 39 40#ifdef CONFIG_RTE_CB_MULTI 41 multi_init (); 42#endif 43} 44 45void __init mach_setup (char **cmdline) 46{ 47#ifdef CONFIG_RTE_MB_A_PCI 48 /* Probe for Mother-A, and print a message if we find it. */ 49 *(volatile unsigned long *)MB_A_SRAM_ADDR = 0xDEADBEEF; 50 if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0xDEADBEEF) { 51 *(volatile unsigned long *)MB_A_SRAM_ADDR = 0x12345678; 52 if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0x12345678) 53 printk (KERN_INFO 54 " NEC SolutionGear/Midas lab" 55 " RTE-MOTHER-A motherboard\n"); 56 } 57#endif /* CONFIG_RTE_MB_A_PCI */ 58 59 mach_tick = led_tick; 60} 61 62void machine_restart (char *__unused) 63{ 64#ifdef CONFIG_RESET_GUARD 65 disable_reset_guard (); 66#endif 67 asm ("jmp r0"); /* Jump to the reset vector. */ 68} 69 70/* This says `HALt.' in LEDese. */ 71static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 }; 72 73void machine_halt (void) 74{ 75#ifdef CONFIG_RESET_GUARD 76 disable_reset_guard (); 77#endif 78 79 /* Ignore all interrupts. */ 80 local_irq_disable (); 81 82 /* Write a little message. */ 83 write_leds (0, halt_leds_msg, sizeof halt_leds_msg); 84 85 /* Really halt. */ 86 for (;;) 87 asm ("halt; nop; nop; nop; nop; nop"); 88} 89 90void machine_power_off (void) 91{ 92 machine_halt (); 93} 94 95 96/* Animated LED display for timer tick. */ 97 98#define TICK_UPD_FREQ 6 99static int tick_frames[][10] = { 100 { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, -1 }, 101 { 0x63, 0x5c, -1 }, 102 { 0x5c, 0x00, -1 }, 103 { 0x63, 0x00, -1 }, 104 { -1 } 105}; 106 107static void led_tick () 108{ 109 static unsigned counter = 0; 110 111 if (++counter == (HZ / TICK_UPD_FREQ)) { 112 /* Which frame we're currently displaying for each digit. */ 113 static unsigned frame_nums[LED_NUM_DIGITS] = { 0 }; 114 /* Display image. */ 115 static unsigned char image[LED_NUM_DIGITS] = { 0 }; 116 unsigned char prev_image[LED_NUM_DIGITS]; 117 int write_to_leds = 1; /* true if we should actually display */ 118 int digit; 119 120 /* We check to see if the physical LEDs contains what we last 121 wrote to them; if not, we suppress display (this is so that 122 users can write to the LEDs, and not have their output 123 overwritten). As a special case, we start writing again if 124 all the LEDs are blank, or our display image is all zeros 125 (indicating that this is the initial update, when the actual 126 LEDs might contain random data). */ 127 read_leds (0, prev_image, LED_NUM_DIGITS); 128 for (digit = 0; digit < LED_NUM_DIGITS; digit++) 129 if (image[digit] != prev_image[digit] 130 && image[digit] && prev_image[digit]) 131 { 132 write_to_leds = 0; 133 break; 134 } 135 136 /* Update display image. */ 137 for (digit = 0; 138 digit < LED_NUM_DIGITS && tick_frames[digit][0] >= 0; 139 digit++) 140 { 141 int frame = tick_frames[digit][frame_nums[digit]]; 142 if (frame < 0) { 143 image[digit] = tick_frames[digit][0]; 144 frame_nums[digit] = 1; 145 } else { 146 image[digit] = frame; 147 frame_nums[digit]++; 148 break; 149 } 150 } 151 152 if (write_to_leds) 153 /* Write the display image to the physical LEDs. */ 154 write_leds (0, image, LED_NUM_DIGITS); 155 156 counter = 0; 157 } 158} 159 160 161/* Mother-A interrupts. */ 162 163#ifdef CONFIG_RTE_GBUS_INT 164 165#define L GBUS_INT_PRIORITY_LOW 166#define M GBUS_INT_PRIORITY_MEDIUM 167#define H GBUS_INT_PRIORITY_HIGH 168 169static struct gbus_int_irq_init gbus_irq_inits[] = { 170#ifdef CONFIG_RTE_MB_A_PCI 171 { "MB_A_LAN", IRQ_MB_A_LAN, 1, 1, L }, 172 { "MB_A_PCI1", IRQ_MB_A_PCI1(0), IRQ_MB_A_PCI1_NUM, 1, L }, 173 { "MB_A_PCI2", IRQ_MB_A_PCI2(0), IRQ_MB_A_PCI2_NUM, 1, L }, 174 { "MB_A_EXT", IRQ_MB_A_EXT(0), IRQ_MB_A_EXT_NUM, 1, L }, 175 { "MB_A_USB_OC",IRQ_MB_A_USB_OC(0), IRQ_MB_A_USB_OC_NUM, 1, L }, 176 { "MB_A_PCMCIA_OC",IRQ_MB_A_PCMCIA_OC, 1, 1, L }, 177#endif 178 { 0 } 179}; 180#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1) 181 182static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS]; 183 184#endif /* CONFIG_RTE_GBUS_INT */ 185 186 187void __init rte_cb_init_irqs (void) 188{ 189#ifdef CONFIG_RTE_GBUS_INT 190 gbus_int_init_irqs (); 191 gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes); 192#endif /* CONFIG_RTE_GBUS_INT */ 193} 194