1/* 2 * A collection of structures, addresses, and values associated with 3 * the Embedded Planet RPX6 (or RPX Super) MPC8260 board. 4 * Copied from the RPX-Classic and SBS8260 stuff. 5 * 6 * Copyright (c) 2001 Dan Malek <dan@embeddededge.com> 7 */ 8#ifdef __KERNEL__ 9#ifndef __ASM_PLATFORMS_RPX8260_H__ 10#define __ASM_PLATFORMS_RPX8260_H__ 11 12/* A Board Information structure that is given to a program when 13 * prom starts it up. 14 */ 15typedef struct bd_info { 16 unsigned int bi_memstart; /* Memory start address */ 17 unsigned int bi_memsize; /* Memory (end) size in bytes */ 18 unsigned int bi_nvsize; /* NVRAM size in bytes (can be 0) */ 19 unsigned int bi_intfreq; /* Internal Freq, in Hz */ 20 unsigned int bi_busfreq; /* Bus Freq, in MHz */ 21 unsigned int bi_cpmfreq; /* CPM Freq, in MHz */ 22 unsigned int bi_brgfreq; /* BRG Freq, in MHz */ 23 unsigned int bi_vco; /* VCO Out from PLL */ 24 unsigned int bi_baudrate; /* Default console baud rate */ 25 unsigned int bi_immr; /* IMMR when called from boot rom */ 26 unsigned char bi_enetaddr[6]; 27} bd_t; 28 29extern bd_t m8xx_board_info; 30 31/* Memory map is configured by the PROM startup. 32 * We just map a few things we need. The CSR is actually 4 byte-wide 33 * registers that can be accessed as 8-, 16-, or 32-bit values. 34 */ 35#define CPM_MAP_ADDR ((uint)0xf0000000) 36#define RPX_CSR_ADDR ((uint)0xfa000000) 37#define RPX_CSR_SIZE ((uint)(512 * 1024)) 38#define RPX_NVRTC_ADDR ((uint)0xfa080000) 39#define RPX_NVRTC_SIZE ((uint)(512 * 1024)) 40 41/* The RPX6 has 16, byte wide control/status registers. 42 * Not all are used (yet). 43 */ 44extern volatile u_char *rpx6_csr_addr; 45 46/* Things of interest in the CSR. 47*/ 48#define BCSR0_ID_MASK ((u_char)0xf0) /* Read only */ 49#define BCSR0_SWITCH_MASK ((u_char)0x0f) /* Read only */ 50#define BCSR1_XCVR_SMC1 ((u_char)0x80) 51#define BCSR1_XCVR_SMC2 ((u_char)0x40) 52#define BCSR2_FLASH_WENABLE ((u_char)0x20) 53#define BCSR2_NVRAM_ENABLE ((u_char)0x10) 54#define BCSR2_ALT_IRQ2 ((u_char)0x08) 55#define BCSR2_ALT_IRQ3 ((u_char)0x04) 56#define BCSR2_PRST ((u_char)0x02) /* Force reset */ 57#define BCSR2_ENPRST ((u_char)0x01) /* Enable POR */ 58#define BCSR3_MODCLK_MASK ((u_char)0xe0) 59#define BCSR3_ENCLKHDR ((u_char)0x10) 60#define BCSR3_LED5 ((u_char)0x04) /* 0 == on */ 61#define BCSR3_LED6 ((u_char)0x02) /* 0 == on */ 62#define BCSR3_LED7 ((u_char)0x01) /* 0 == on */ 63#define BCSR4_EN_PHY ((u_char)0x80) /* Enable PHY */ 64#define BCSR4_EN_MII ((u_char)0x40) /* Enable PHY */ 65#define BCSR4_MII_READ ((u_char)0x04) 66#define BCSR4_MII_MDC ((u_char)0x02) 67#define BCSR4_MII_MDIO ((u_char)0x01) 68#define BCSR13_FETH_IRQMASK ((u_char)0xf0) 69#define BCSR15_FETH_IRQ ((u_char)0x20) 70 71#define PHY_INTERRUPT SIU_INT_IRQ7 72 73/* For our show_cpuinfo hooks. */ 74#define CPUINFO_VENDOR "Embedded Planet" 75#define CPUINFO_MACHINE "EP8260 PowerPC" 76 77/* Warm reset vector. */ 78#define BOOTROM_RESTART_ADDR ((uint)0xfff00104) 79 80#endif /* __ASM_PLATFORMS_RPX8260_H__ */ 81#endif /* __KERNEL__ */ 82