1/* Definitions for data structures and routines for the regular 2 expression library, version 0.12. 3 Copyright (C) 1985,89,90,91,92,93,95,96,97,98 Free Software Foundation, Inc. 4 5 This file is part of the GNU C Library. Its master source is NOT part of 6 the C library, however. The master source lives in /gd/gnu/lib. 7 8 The GNU C Library is free software; you can redistribute it and/or 9 modify it under the terms of the GNU Library General Public License as 10 published by the Free Software Foundation; either version 2 of the 11 License, or (at your option) any later version. 12 13 The GNU C Library is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 Library General Public License for more details. 17 18 You should have received a copy of the GNU Library General Public 19 License along with the GNU C Library; see the file COPYING.LIB. If not, 20 write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, 21 Boston, MA 02111-1307, USA. */ 22 23#ifndef _REGEX_H 24#define _REGEX_H 1 25 26/* Allow the use in C++ code. */ 27#ifdef __cplusplus 28extern "C" { 29#endif 30 31/* POSIX says that <sys/types.h> must be included (by the caller) before 32 <regex.h>. */ 33 34#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS 35/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it 36 should be there. */ 37# include <stddef.h> 38#endif 39 40/* The following two types have to be signed and unsigned integer type 41 wide enough to hold a value of a pointer. For most ANSI compilers 42 ptrdiff_t and size_t should be likely OK. Still size of these two 43 types is 2 for Microsoft C. Ugh... */ 44typedef long int s_reg_t; 45typedef unsigned long int active_reg_t; 46 47/* The following bits are used to determine the regexp syntax we 48 recognize. The set/not-set meanings are chosen so that Emacs syntax 49 remains the value 0. The bits are given in alphabetical order, and 50 the definitions shifted by one from the previous bit; thus, when we 51 add or remove a bit, only one other definition need change. */ 52typedef unsigned long int reg_syntax_t; 53 54/* If this bit is not set, then \ inside a bracket expression is literal. 55 If set, then such a \ quotes the following character. */ 56#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1) 57 58/* If this bit is not set, then + and ? are operators, and \+ and \? are 59 literals. 60 If set, then \+ and \? are operators and + and ? are literals. */ 61#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1) 62 63/* If this bit is set, then character classes are supported. They are: 64 [:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:], 65 [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:]. 66 If not set, then character classes are not supported. */ 67#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1) 68 69/* If this bit is set, then ^ and $ are always anchors (outside bracket 70 expressions, of course). 71 If this bit is not set, then it depends: 72 ^ is an anchor if it is at the beginning of a regular 73 expression or after an open-group or an alternation operator; 74 $ is an anchor if it is at the end of a regular expression, or 75 before a close-group or an alternation operator. 76 77 This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because 78 POSIX draft 11.2 says that * etc. in leading positions is undefined. 79 We already implemented a previous draft which made those constructs 80 invalid, though, so we haven't changed the code back. */ 81#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1) 82 83/* If this bit is set, then special characters are always special 84 regardless of where they are in the pattern. 85 If this bit is not set, then special characters are special only in 86 some contexts; otherwise they are ordinary. Specifically, 87 * + ? and intervals are only special when not after the beginning, 88 open-group, or alternation operator. */ 89#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1) 90 91/* If this bit is set, then *, +, ?, and { cannot be first in an re or 92 immediately after an alternation or begin-group operator. */ 93#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1) 94 95/* If this bit is set, then . matches newline. 96 If not set, then it doesn't. */ 97#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1) 98 99/* If this bit is set, then . doesn't match NUL. 100 If not set, then it does. */ 101#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1) 102 103/* If this bit is set, nonmatching lists [^...] do not match newline. 104 If not set, they do. */ 105#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1) 106 107/* If this bit is set, either \{...\} or {...} defines an 108 interval, depending on RE_NO_BK_BRACES. 109 If not set, \{, \}, {, and } are literals. */ 110#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1) 111 112/* If this bit is set, +, ? and | aren't recognized as operators. 113 If not set, they are. */ 114#define RE_LIMITED_OPS (RE_INTERVALS << 1) 115 116/* If this bit is set, newline is an alternation operator. 117 If not set, newline is literal. */ 118#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1) 119 120/* If this bit is set, then `{...}' defines an interval, and \{ and \} 121 are literals. 122 If not set, then `\{...\}' defines an interval. */ 123#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1) 124 125/* If this bit is set, (...) defines a group, and \( and \) are literals. 126 If not set, \(...\) defines a group, and ( and ) are literals. */ 127#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1) 128 129/* If this bit is set, then \<digit> matches <digit>. 130 If not set, then \<digit> is a back-reference. */ 131#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1) 132 133/* If this bit is set, then | is an alternation operator, and \| is literal. 134 If not set, then \| is an alternation operator, and | is literal. */ 135#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1) 136 137/* If this bit is set, then an ending range point collating higher 138 than the starting range point, as in [z-a], is invalid. 139 If not set, then when ending range point collates higher than the 140 starting range point, the range is ignored. */ 141#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1) 142 143/* If this bit is set, then an unmatched ) is ordinary. 144 If not set, then an unmatched ) is invalid. */ 145#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1) 146 147/* If this bit is set, succeed as soon as we match the whole pattern, 148 without further backtracking. */ 149#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1) 150 151/* If this bit is set, do not process the GNU regex operators. 152 If not set, then the GNU regex operators are recognized. */ 153#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1) 154 155/* If this bit is set, turn on internal regex debugging. 156 If not set, and debugging was on, turn it off. 157 This only works if regex.c is compiled -DDEBUG. 158 We define this bit always, so that all that's needed to turn on 159 debugging is to recompile regex.c; the calling code can always have 160 this bit set, and it won't affect anything in the normal case. */ 161#define RE_DEBUG (RE_NO_GNU_OPS << 1) 162 163/* This global variable defines the particular regexp syntax to use (for 164 some interfaces). When a regexp is compiled, the syntax used is 165 stored in the pattern buffer, so changing this does not affect 166 already-compiled regexps. */ 167extern reg_syntax_t re_syntax_options; 168 169/* Define combinations of the above bits for the standard possibilities. 170 (The [[[ comments delimit what gets put into the Texinfo file, so 171 don't delete them!) */ 172/* [[[begin syntaxes]]] */ 173#define RE_SYNTAX_EMACS 0 174 175#define RE_SYNTAX_AWK \ 176 (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \ 177 | RE_NO_BK_PARENS | RE_NO_BK_REFS \ 178 | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \ 179 | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \ 180 | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS) 181 182#define RE_SYNTAX_GNU_AWK \ 183 ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \ 184 & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS)) 185 186#define RE_SYNTAX_POSIX_AWK \ 187 (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \ 188 | RE_INTERVALS | RE_NO_GNU_OPS) 189 190#define RE_SYNTAX_GREP \ 191 (RE_BK_PLUS_QM | RE_CHAR_CLASSES \ 192 | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \ 193 | RE_NEWLINE_ALT) 194 195#define RE_SYNTAX_EGREP \ 196 (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \ 197 | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \ 198 | RE_NEWLINE_ALT | RE_NO_BK_PARENS \ 199 | RE_NO_BK_VBAR) 200 201#define RE_SYNTAX_POSIX_EGREP \ 202 (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES) 203 204/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */ 205#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC 206 207#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC 208 209/* Syntax bits common to both basic and extended POSIX regex syntax. */ 210#define _RE_SYNTAX_POSIX_COMMON \ 211 (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \ 212 | RE_INTERVALS | RE_NO_EMPTY_RANGES) 213 214#define RE_SYNTAX_POSIX_BASIC \ 215 (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM) 216 217/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes 218 RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this 219 isn't minimal, since other operators, such as \`, aren't disabled. */ 220#define RE_SYNTAX_POSIX_MINIMAL_BASIC \ 221 (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS) 222 223#define RE_SYNTAX_POSIX_EXTENDED \ 224 (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ 225 | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \ 226 | RE_NO_BK_PARENS | RE_NO_BK_VBAR \ 227 | RE_UNMATCHED_RIGHT_PAREN_ORD) 228 229/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INVALID_OPS 230 replaces RE_CONTEXT_INDEP_OPS and RE_NO_BK_REFS is added. */ 231#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \ 232 (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ 233 | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \ 234 | RE_NO_BK_PARENS | RE_NO_BK_REFS \ 235 | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD) 236/* [[[end syntaxes]]] */ 237 238/* Maximum number of duplicates an interval can allow. Some systems 239 (erroneously) define this in other header files, but we want our 240 value, so remove any previous define. */ 241#ifdef RE_DUP_MAX 242# undef RE_DUP_MAX 243#endif 244/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */ 245#define RE_DUP_MAX (0x7fff) 246 247 248/* POSIX `cflags' bits (i.e., information for `regcomp'). */ 249 250/* If this bit is set, then use extended regular expression syntax. 251 If not set, then use basic regular expression syntax. */ 252#define REG_EXTENDED 1 253 254/* If this bit is set, then ignore case when matching. 255 If not set, then case is significant. */ 256#define REG_ICASE (REG_EXTENDED << 1) 257 258/* If this bit is set, then anchors do not match at newline 259 characters in the string. 260 If not set, then anchors do match at newlines. */ 261#define REG_NEWLINE (REG_ICASE << 1) 262 263/* If this bit is set, then report only success or fail in regexec. 264 If not set, then returns differ between not matching and errors. */ 265#define REG_NOSUB (REG_NEWLINE << 1) 266 267 268/* POSIX `eflags' bits (i.e., information for regexec). */ 269 270/* If this bit is set, then the beginning-of-line operator doesn't match 271 the beginning of the string (presumably because it's not the 272 beginning of a line). 273 If not set, then the beginning-of-line operator does match the 274 beginning of the string. */ 275#define REG_NOTBOL 1 276 277/* Like REG_NOTBOL, except for the end-of-line. */ 278#define REG_NOTEOL (1 << 1) 279 280 281/* If any error codes are removed, changed, or added, update the 282 `re_error_msg' table in regex.c. */ 283typedef enum 284{ 285#ifdef _XOPEN_SOURCE 286 REG_ENOSYS = -1, /* This will never happen for this implementation. */ 287#endif 288 289 REG_NOERROR = 0, /* Success. */ 290 REG_NOMATCH, /* Didn't find a match (for regexec). */ 291 292 /* POSIX regcomp return error codes. (In the order listed in the 293 standard.) */ 294 REG_BADPAT, /* Invalid pattern. */ 295 REG_ECOLLATE, /* Not implemented. */ 296 REG_ECTYPE, /* Invalid character class name. */ 297 REG_EESCAPE, /* Trailing backslash. */ 298 REG_ESUBREG, /* Invalid back reference. */ 299 REG_EBRACK, /* Unmatched left bracket. */ 300 REG_EPAREN, /* Parenthesis imbalance. */ 301 REG_EBRACE, /* Unmatched \{. */ 302 REG_BADBR, /* Invalid contents of \{\}. */ 303 REG_ERANGE, /* Invalid range end. */ 304 REG_ESPACE, /* Ran out of memory. */ 305 REG_BADRPT, /* No preceding re for repetition op. */ 306 307 /* Error codes we've added. */ 308 REG_EEND, /* Premature end. */ 309 REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */ 310 REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */ 311} reg_errcode_t; 312 313/* This data structure represents a compiled pattern. Before calling 314 the pattern compiler, the fields `buffer', `allocated', `fastmap', 315 `translate', and `no_sub' can be set. After the pattern has been 316 compiled, the `re_nsub' field is available. All other fields are 317 private to the regex routines. */ 318 319#ifndef RE_TRANSLATE_TYPE 320# define RE_TRANSLATE_TYPE char * 321#endif 322 323struct re_pattern_buffer 324{ 325/* [[[begin pattern_buffer]]] */ 326 /* Space that holds the compiled pattern. It is declared as 327 `unsigned char *' because its elements are 328 sometimes used as array indexes. */ 329 unsigned char *buffer; 330 331 /* Number of bytes to which `buffer' points. */ 332 unsigned long int allocated; 333 334 /* Number of bytes actually used in `buffer'. */ 335 unsigned long int used; 336 337 /* Syntax setting with which the pattern was compiled. */ 338 reg_syntax_t syntax; 339 340 /* Pointer to a fastmap, if any, otherwise zero. re_search uses 341 the fastmap, if there is one, to skip over impossible 342 starting points for matches. */ 343 char *fastmap; 344 345 /* Either a translate table to apply to all characters before 346 comparing them, or zero for no translation. The translation 347 is applied to a pattern when it is compiled and to a string 348 when it is matched. */ 349 RE_TRANSLATE_TYPE translate; 350 351 /* Number of subexpressions found by the compiler. */ 352 size_t re_nsub; 353 354 /* Zero if this pattern cannot match the empty string, one else. 355 Well, in truth it's used only in `re_search_2', to see 356 whether or not we should use the fastmap, so we don't set 357 this absolutely perfectly; see `re_compile_fastmap' (the 358 `duplicate' case). */ 359 unsigned can_be_null : 1; 360 361 /* If REGS_UNALLOCATED, allocate space in the `regs' structure 362 for `max (RE_NREGS, re_nsub + 1)' groups. 363 If REGS_REALLOCATE, reallocate space if necessary. 364 If REGS_FIXED, use what's there. */ 365#define REGS_UNALLOCATED 0 366#define REGS_REALLOCATE 1 367#define REGS_FIXED 2 368 unsigned regs_allocated : 2; 369 370 /* Set to zero when `regex_compile' compiles a pattern; set to one 371 by `re_compile_fastmap' if it updates the fastmap. */ 372 unsigned fastmap_accurate : 1; 373 374 /* If set, `re_match_2' does not return information about 375 subexpressions. */ 376 unsigned no_sub : 1; 377 378 /* If set, a beginning-of-line anchor doesn't match at the 379 beginning of the string. */ 380 unsigned not_bol : 1; 381 382 /* Similarly for an end-of-line anchor. */ 383 unsigned not_eol : 1; 384 385 /* If true, an anchor at a newline matches. */ 386 unsigned newline_anchor : 1; 387 388/* [[[end pattern_buffer]]] */ 389}; 390 391typedef struct re_pattern_buffer regex_t; 392 393/* Type for byte offsets within the string. POSIX mandates this. */ 394typedef int regoff_t; 395 396 397/* This is the structure we store register match data in. See 398 regex.texinfo for a full description of what registers match. */ 399struct re_registers 400{ 401 unsigned num_regs; 402 regoff_t *start; 403 regoff_t *end; 404}; 405 406 407/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer, 408 `re_match_2' returns information about at least this many registers 409 the first time a `regs' structure is passed. */ 410#ifndef RE_NREGS 411# define RE_NREGS 30 412#endif 413 414 415/* POSIX specification for registers. Aside from the different names than 416 `re_registers', POSIX uses an array of structures, instead of a 417 structure of arrays. */ 418typedef struct 419{ 420 regoff_t rm_so; /* Byte offset from string's start to substring's start. */ 421 regoff_t rm_eo; /* Byte offset from string's start to substring's end. */ 422} regmatch_t; 423 424/* Declarations for routines. */ 425 426/* To avoid duplicating every routine declaration -- once with a 427 prototype (if we are ANSI), and once without (if we aren't) -- we 428 use the following macro to declare argument types. This 429 unfortunately clutters up the declarations a bit, but I think it's 430 worth it. */ 431 432#if __STDC__ 433 434# define _RE_ARGS(args) args 435 436#else /* not __STDC__ */ 437 438# define _RE_ARGS(args) () 439 440#endif /* not __STDC__ */ 441 442/* Sets the current default syntax to SYNTAX, and return the old syntax. 443 You can also simply assign to the `re_syntax_options' variable. */ 444extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax)); 445 446/* Compile the regular expression PATTERN, with length LENGTH 447 and syntax given by the global `re_syntax_options', into the buffer 448 BUFFER. Return NULL if successful, and an error string if not. */ 449extern const char *re_compile_pattern 450 _RE_ARGS ((const char *pattern, size_t length, 451 struct re_pattern_buffer *buffer)); 452 453 454/* Compile a fastmap for the compiled pattern in BUFFER; used to 455 accelerate searches. Return 0 if successful and -2 if was an 456 internal error. */ 457extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer)); 458 459 460/* Search in the string STRING (with length LENGTH) for the pattern 461 compiled into BUFFER. Start searching at position START, for RANGE 462 characters. Return the starting position of the match, -1 for no 463 match, or -2 for an internal error. Also return register 464 information in REGS (if REGS and BUFFER->no_sub are nonzero). */ 465extern int re_search 466 _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string, 467 int length, int start, int range, struct re_registers *regs)); 468 469 470/* Like `re_search', but search in the concatenation of STRING1 and 471 STRING2. Also, stop searching at index START + STOP. */ 472extern int re_search_2 473 _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1, 474 int length1, const char *string2, int length2, 475 int start, int range, struct re_registers *regs, int stop)); 476 477 478/* Like `re_search', but return how many characters in STRING the regexp 479 in BUFFER matched, starting at position START. */ 480extern int re_match 481 _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string, 482 int length, int start, struct re_registers *regs)); 483 484 485/* Relates to `re_match' as `re_search_2' relates to `re_search'. */ 486extern int re_match_2 487 _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1, 488 int length1, const char *string2, int length2, 489 int start, struct re_registers *regs, int stop)); 490 491 492/* Set REGS to hold NUM_REGS registers, storing them in STARTS and 493 ENDS. Subsequent matches using BUFFER and REGS will use this memory 494 for recording register information. STARTS and ENDS must be 495 allocated with malloc, and must each be at least `NUM_REGS * sizeof 496 (regoff_t)' bytes long. 497 498 If NUM_REGS == 0, then subsequent matches should allocate their own 499 register data. 500 501 Unless this function is called, the first search or match using 502 PATTERN_BUFFER will allocate its own register data, without 503 freeing the old data. */ 504extern void re_set_registers 505 _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs, 506 unsigned num_regs, regoff_t *starts, regoff_t *ends)); 507 508#if defined _REGEX_RE_COMP || defined _LIBC 509# ifndef _CRAY 510/* 4.2 bsd compatibility. */ 511extern char *re_comp _RE_ARGS ((const char *)); 512extern int re_exec _RE_ARGS ((const char *)); 513# endif 514#endif 515 516/* POSIX compatibility. */ 517extern int regcomp _RE_ARGS ((regex_t *__preg, const char *__pattern, 518 int __cflags)); 519 520extern int regexec _RE_ARGS ((const regex_t *__preg, 521 const char *__string, size_t __nmatch, 522 regmatch_t __pmatch[], int __eflags)); 523 524extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg, 525 char *__errbuf, size_t __errbuf_size)); 526 527extern void regfree _RE_ARGS ((regex_t *__preg)); 528 529 530#ifdef __cplusplus 531} 532#endif /* C++ */ 533 534#endif /* regex.h */ 535 536/* 537Local variables: 538make-backup-files: t 539version-control: t 540trim-versions-without-asking: nil 541End: 542*/ 543