1# Makefile.in generated by automake 1.10.1 from Makefile.am.
2# etc/Makefile.  Generated from Makefile.in by configure.
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15
16
17# Makefile.am for etc/
18
19pkgdatadir = $(datadir)/netatalk
20pkglibdir = $(libdir)/netatalk
21pkgincludedir = $(includedir)/netatalk
22am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23install_sh_DATA = $(install_sh) -c -m 644
24install_sh_PROGRAM = $(install_sh) -c
25install_sh_SCRIPT = $(install_sh) -c
26INSTALL_HEADER = $(INSTALL_DATA)
27transform = $(program_transform_name)
28NORMAL_INSTALL = :
29PRE_INSTALL = :
30POST_INSTALL = :
31NORMAL_UNINSTALL = :
32PRE_UNINSTALL = :
33POST_UNINSTALL = :
34build_triplet = mipsel-uclibc-linux-gnu26
35host_triplet = mipsel-uclibc-linux-gnu
36target_triplet = mipsel-uclibc-linux-gnu26
37#am__append_1 = atalkd papd psf
38subdir = etc
39DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
40ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
41am__aclocal_m4_deps = $(top_srcdir)/macros/afs-check.m4 \
42	$(top_srcdir)/macros/cnid-backend.m4 \
43	$(top_srcdir)/macros/config-checks.m4 \
44	$(top_srcdir)/macros/cups.m4 $(top_srcdir)/macros/db3-check.m4 \
45	$(top_srcdir)/macros/grep-check.m4 \
46	$(top_srcdir)/macros/gssapi-check.m4 \
47	$(top_srcdir)/macros/iconv.m4 \
48	$(top_srcdir)/macros/largefile-check.m4 \
49	$(top_srcdir)/macros/libgcrypt.m4 \
50	$(top_srcdir)/macros/pam-check.m4 \
51	$(top_srcdir)/macros/perl-check.m4 \
52	$(top_srcdir)/macros/ps-check.m4 \
53	$(top_srcdir)/macros/quota-check.m4 \
54	$(top_srcdir)/macros/snprintf-check.m4 \
55	$(top_srcdir)/macros/srvloc.m4 \
56	$(top_srcdir)/macros/ssl-check.m4 \
57	$(top_srcdir)/macros/summary.m4 \
58	$(top_srcdir)/macros/tcp-wrappers.m4 \
59	$(top_srcdir)/macros/util.m4 $(top_srcdir)/macros/webmin.m4 \
60	$(top_srcdir)/macros/zeroconf.m4 $(top_srcdir)/configure.in
61am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
62	$(ACLOCAL_M4)
63mkinstalldirs = $(install_sh) -d
64CONFIG_HEADER = $(top_builddir)/config.h
65CONFIG_CLEAN_FILES =
66SOURCES =
67DIST_SOURCES =
68RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
69	html-recursive info-recursive install-data-recursive \
70	install-dvi-recursive install-exec-recursive \
71	install-html-recursive install-info-recursive \
72	install-pdf-recursive install-ps-recursive install-recursive \
73	installcheck-recursive installdirs-recursive pdf-recursive \
74	ps-recursive uninstall-recursive
75RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
76  distclean-recursive maintainer-clean-recursive
77ETAGS = etags
78CTAGS = ctags
79DIST_SUBDIRS = afpd cnid_dbd uams atalkd papd psf
80DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
81ACLOCAL = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.0/missing --run aclocal-1.10
82ACL_LIBS = 
83AFS_CFLAGS = 
84AFS_LIBS = 
85AMTAR = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.0/missing --run tar
86AR = mipsel-linux-linux26-ar
87AUTOCONF = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.0/missing --run autoconf
88AUTOHEADER = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.0/missing --run autoheader
89AUTOMAKE = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.0/missing --run automake-1.10
90AVAHI_CFLAGS = 
91AVAHI_LIBS = 
92AVAHI_TPOLL_CFLAGS = 
93AVAHI_TPOLL_LIBS = 
94AWK = gawk
95BDB_BIN = ${PKG_INSTALL_DIR}/usr/bin
96BDB_CFLAGS =  -I${PKG_INSTALL_DIR}/usr/include/
97BDB_LIBS =  ${PKG_INSTALL_DIR}/usr/lib/libdb-4.7.so
98BDB_PATH = ${PKG_INSTALL_DIR}/usr
99CC = mipsel-linux-uclibc-gcc
100CCDEPMODE = depmode=gcc3
101CFLAGS = -I$(top_srcdir)/include -D_U_="__attribute__((unused))" -I${PKG_INSTALL_DIR}/usr/include -I$(top_srcdir)/sys
102COMPILE_64BIT_KMODULE = 
103COMPILE_KERNEL_GCC = 
104CPP = mipsel-linux-uclibc-gcc -E
105CPPFLAGS = 
106CRYPT_LIBS = -lcrypt 
107CUPS_CFLAGS = 
108CUPS_CONFIG = 
109CUPS_LDFLAGS = 
110CUPS_LIBS = 
111CXX = mipsel-linux-uclibc-g++
112CXXCPP = mipsel-linux-uclibc-g++ -E
113CXXDEPMODE = depmode=gcc3
114CXXFLAGS = -Os -I${PKG_INSTALL_DIR}/usr/include
115CYGPATH_W = echo
116DEFAULT_CNID_SCHEME = dbd
117DEFS = -DHAVE_CONFIG_H
118DEPDIR = .deps
119DSYMUTIL = 
120ECHO = echo
121ECHO_C = 
122ECHO_N = -n
123ECHO_T = 
124EGREP = /bin/grep -E
125EXEEXT = 
126F77 = gfortran
127FFLAGS = -g -O2
128GREP = /bin/grep
129GSSAPI_CFLAGS = 
130GSSAPI_LIBS = 
131ICONV_CFLAGS = 
132ICONV_LIBS = 
133INSTALL = /usr/bin/install -c
134INSTALL_DATA = ${INSTALL} -m 644
135INSTALL_PROGRAM = ${INSTALL}
136INSTALL_SCRIPT = ${INSTALL}
137INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
138KCFLAGS = 
139KLDFLAGS = 
140KRB5_CONFIG = 
141LDFLAGS = -L${PKG_INSTALL_DIR}/usr/lib
142LIBADD_DL = -ldl
143LIBGCRYPT_CFLAGS = -I${PKG_INSTALL_DIR}/usr/include
144LIBGCRYPT_CONFIG = ${PKG_INSTALL_DIR}/usr/bin/libgcrypt-config
145LIBGCRYPT_LIBS = -L${PKG_INSTALL_DIR}/usr/lib ${PKG_INSTALL_DIR}/usr/lib/libgcrypt.so ${PKG_INSTALL_DIR}/usr/lib/libgpg-error.so
146LIBOBJS =  ${LIBOBJDIR}memcmp$U.o
147LIBS = -lpthread  -L$(top_srcdir)/libatalk
148LIBTOOL = $(SHELL) $(top_builddir)/libtool
149LN_S = ln -s
150LTLIBOBJS =  ${LIBOBJDIR}memcmp$U.lo
151MAINT = #
152MAKEINFO = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.0/missing --run makeinfo
153MKDIR_P = /bin/mkdir -p
154NETATALK_VERSION = 2.2.0
155NMEDIT = 
156OBJEXT = o
157OVERWRITE_CONFIG = no
158PACKAGE = netatalk
159PACKAGE_BUGREPORT = 
160PACKAGE_NAME = 
161PACKAGE_STRING = 
162PACKAGE_TARNAME = 
163PACKAGE_VERSION = 
164PAMDIR = /
165PAM_ACCOUNT = system-auth
166PAM_AUTH = system-auth
167PAM_CFLAGS = 
168PAM_DIRECTIVE = include
169PAM_LIBS = 
170PAM_PASSWORD = system-auth
171PAM_SESSION = system-auth
172PATH_SEPARATOR = :
173PERL = /usr/bin/perl
174PKGCONFDIR = /etc/netatalk
175PKG_CONFIG = /usr/bin/pkg-config
176PS = /bin/ps
177PTHREAD_LIBS = -lpthread
178QUOTA_LIBS = 
179RANLIB = mipsel-linux-linux26-ranlib
180SED = /bin/sed
181SERVERTEXT = /etc/netatalk/msg
182SET_MAKE = 
183SHELL = /bin/sh
184SLP_CFLAGS = 
185SLP_LIBS = 
186SPOOLDIR = /var/spool/netatalk
187SSL_CFLAGS =  -I${PKG_INSTALL_DIR}/usr/include -I${PKG_INSTALL_DIR}/usr/include/openssl
188SSL_LIBS =  -L${PKG_INSTALL_DIR}/usr/lib -L${PKG_INSTALL_DIR}/usr -lcrypto
189STRIP = mipsel-linux-linux26-strip
190UAMS_PATH = /usr/lib/uams
191VERSION = 2.2.0
192WEBMIN_PASS = 
193WEBMIN_PATH = 
194WEBMIN_PORT = 
195WEBMIN_USER = 
196WEBMIN_VERSION = 
197WRAP_LIBS = 
198ZEROCONF_CFLAGS = 
199ZEROCONF_LIBS = 
200abs_builddir = ${TIMEMACHINE_PATH}/netatalk-2.2.0/etc
201abs_srcdir = ${TIMEMACHINE_PATH}/netatalk-2.2.0/etc
202abs_top_builddir = ${TIMEMACHINE_PATH}/netatalk-2.2.0
203abs_top_srcdir = ${TIMEMACHINE_PATH}/netatalk-2.2.0
204ac_ct_CC = 
205ac_ct_CXX = 
206ac_ct_F77 = gfortran
207am__include = include
208am__leading_dot = .
209am__quote = 
210am__tar = ${AMTAR} chof - "$$tardir"
211am__untar = ${AMTAR} xf -
212bindir = ${exec_prefix}/bin
213build = mipsel-uclibc-linux-gnu26
214build_alias = mipsel-uclibc-linux-gnu26
215build_cpu = mipsel
216build_os = linux-gnu26
217build_vendor = uclibc
218builddir = .
219compiled_backends =  dbd last tdb
220datadir = /usr/share
221datarootdir = ${prefix}/share
222docdir = ${datarootdir}/doc/${PACKAGE}
223dvidir = ${docdir}
224exec_prefix = /usr
225host = mipsel-uclibc-linux-gnu
226host_alias = mipsel-uclibc-linux
227host_cpu = mipsel
228host_os = linux-gnu
229host_vendor = uclibc
230htmldir = ${docdir}
231includedir = ${prefix}/include
232infodir = /usr/info
233install_sh = $(SHELL) ${TIMEMACHINE_PATH}/netatalk-2.2.0/install-sh
234libdir = ${PKG_INSTALL_DIR}/usr
235libexecdir = ${PKG_INSTALL_DIR}/usr/lib
236localedir = ${datarootdir}/locale
237localstatedir = /var
238mandir = /usr/man
239mkdir_p = /bin/mkdir -p
240oldincludedir = /usr/include
241pdfdir = ${docdir}
242prefix = /usr
243program_transform_name = s&$$&&;s&^&&
244psdir = ${docdir}
245sbindir = ${exec_prefix}/sbin
246sharedstatedir = ${prefix}/com
247srcdir = .
248sysconfdir = /etc
249target = mipsel-uclibc-linux-gnu26
250target_alias = mipsel-uclibc-linux-gnu26
251target_cpu = mipsel
252target_os = linux-gnu26
253target_vendor = uclibc
254top_builddir = ..
255top_srcdir = ..
256SUBDIRS = afpd cnid_dbd uams $(am__append_1)
257all: all-recursive
258
259.SUFFIXES:
260$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
261	@for dep in $?; do \
262	  case '$(am__configure_deps)' in \
263	    *$$dep*) \
264	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
265		&& exit 0; \
266	      exit 1;; \
267	  esac; \
268	done; \
269	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  etc/Makefile'; \
270	cd $(top_srcdir) && \
271	  $(AUTOMAKE) --foreign  etc/Makefile
272.PRECIOUS: Makefile
273Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
274	@case '$?' in \
275	  *config.status*) \
276	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
277	  *) \
278	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
279	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
280	esac;
281
282$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
283	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
284
285$(top_srcdir)/configure: # $(am__configure_deps)
286	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
287$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
288	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
289
290mostlyclean-libtool:
291	-rm -f *.lo
292
293clean-libtool:
294	-rm -rf .libs _libs
295
296# This directory's subdirectories are mostly independent; you can cd
297# into them and run `make' without going through this Makefile.
298# To change the values of `make' variables: instead of editing Makefiles,
299# (1) if the variable is set in `config.status', edit `config.status'
300#     (which will cause the Makefiles to be regenerated when you run `make');
301# (2) otherwise, pass the desired values on the `make' command line.
302$(RECURSIVE_TARGETS):
303	@failcom='exit 1'; \
304	for f in x $$MAKEFLAGS; do \
305	  case $$f in \
306	    *=* | --[!k]*);; \
307	    *k*) failcom='fail=yes';; \
308	  esac; \
309	done; \
310	dot_seen=no; \
311	target=`echo $@ | sed s/-recursive//`; \
312	list='$(SUBDIRS)'; for subdir in $$list; do \
313	  echo "Making $$target in $$subdir"; \
314	  if test "$$subdir" = "."; then \
315	    dot_seen=yes; \
316	    local_target="$$target-am"; \
317	  else \
318	    local_target="$$target"; \
319	  fi; \
320	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
321	  || eval $$failcom; \
322	done; \
323	if test "$$dot_seen" = "no"; then \
324	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
325	fi; test -z "$$fail"
326
327$(RECURSIVE_CLEAN_TARGETS):
328	@failcom='exit 1'; \
329	for f in x $$MAKEFLAGS; do \
330	  case $$f in \
331	    *=* | --[!k]*);; \
332	    *k*) failcom='fail=yes';; \
333	  esac; \
334	done; \
335	dot_seen=no; \
336	case "$@" in \
337	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
338	  *) list='$(SUBDIRS)' ;; \
339	esac; \
340	rev=''; for subdir in $$list; do \
341	  if test "$$subdir" = "."; then :; else \
342	    rev="$$subdir $$rev"; \
343	  fi; \
344	done; \
345	rev="$$rev ."; \
346	target=`echo $@ | sed s/-recursive//`; \
347	for subdir in $$rev; do \
348	  echo "Making $$target in $$subdir"; \
349	  if test "$$subdir" = "."; then \
350	    local_target="$$target-am"; \
351	  else \
352	    local_target="$$target"; \
353	  fi; \
354	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
355	  || eval $$failcom; \
356	done && test -z "$$fail"
357tags-recursive:
358	list='$(SUBDIRS)'; for subdir in $$list; do \
359	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
360	done
361ctags-recursive:
362	list='$(SUBDIRS)'; for subdir in $$list; do \
363	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
364	done
365
366ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
367	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
368	unique=`for i in $$list; do \
369	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
370	  done | \
371	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
372	      END { if (nonempty) { for (i in files) print i; }; }'`; \
373	mkid -fID $$unique
374tags: TAGS
375
376TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
377		$(TAGS_FILES) $(LISP)
378	tags=; \
379	here=`pwd`; \
380	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
381	  include_option=--etags-include; \
382	  empty_fix=.; \
383	else \
384	  include_option=--include; \
385	  empty_fix=; \
386	fi; \
387	list='$(SUBDIRS)'; for subdir in $$list; do \
388	  if test "$$subdir" = .; then :; else \
389	    test ! -f $$subdir/TAGS || \
390	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
391	  fi; \
392	done; \
393	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
394	unique=`for i in $$list; do \
395	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
396	  done | \
397	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
398	      END { if (nonempty) { for (i in files) print i; }; }'`; \
399	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
400	  test -n "$$unique" || unique=$$empty_fix; \
401	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
402	    $$tags $$unique; \
403	fi
404ctags: CTAGS
405CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
406		$(TAGS_FILES) $(LISP)
407	tags=; \
408	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
409	unique=`for i in $$list; do \
410	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
411	  done | \
412	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
413	      END { if (nonempty) { for (i in files) print i; }; }'`; \
414	test -z "$(CTAGS_ARGS)$$tags$$unique" \
415	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
416	     $$tags $$unique
417
418GTAGS:
419	here=`$(am__cd) $(top_builddir) && pwd` \
420	  && cd $(top_srcdir) \
421	  && gtags -i $(GTAGS_ARGS) $$here
422
423distclean-tags:
424	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
425
426distdir: $(DISTFILES)
427	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
428	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
429	list='$(DISTFILES)'; \
430	  dist_files=`for file in $$list; do echo $$file; done | \
431	  sed -e "s|^$$srcdirstrip/||;t" \
432	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
433	case $$dist_files in \
434	  */*) $(MKDIR_P) `echo "$$dist_files" | \
435			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
436			   sort -u` ;; \
437	esac; \
438	for file in $$dist_files; do \
439	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
440	  if test -d $$d/$$file; then \
441	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
442	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
443	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
444	    fi; \
445	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
446	  else \
447	    test -f $(distdir)/$$file \
448	    || cp -p $$d/$$file $(distdir)/$$file \
449	    || exit 1; \
450	  fi; \
451	done
452	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
453	  if test "$$subdir" = .; then :; else \
454	    test -d "$(distdir)/$$subdir" \
455	    || $(MKDIR_P) "$(distdir)/$$subdir" \
456	    || exit 1; \
457	    distdir=`$(am__cd) $(distdir) && pwd`; \
458	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
459	    (cd $$subdir && \
460	      $(MAKE) $(AM_MAKEFLAGS) \
461	        top_distdir="$$top_distdir" \
462	        distdir="$$distdir/$$subdir" \
463		am__remove_distdir=: \
464		am__skip_length_check=: \
465	        distdir) \
466	      || exit 1; \
467	  fi; \
468	done
469check-am: all-am
470check: check-recursive
471all-am: Makefile
472installdirs: installdirs-recursive
473installdirs-am:
474install: install-recursive
475install-exec: install-exec-recursive
476install-data: install-data-recursive
477uninstall: uninstall-recursive
478
479install-am: all-am
480	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
481
482installcheck: installcheck-recursive
483install-strip:
484	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
485	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
486	  `test -z '$(STRIP)' || \
487	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
488mostlyclean-generic:
489
490clean-generic:
491
492distclean-generic:
493	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
494
495maintainer-clean-generic:
496	@echo "This command is intended for maintainers to use"
497	@echo "it deletes files that may require special tools to rebuild."
498clean: clean-recursive
499
500clean-am: clean-generic clean-libtool mostlyclean-am
501
502distclean: distclean-recursive
503	-rm -f Makefile
504distclean-am: clean-am distclean-generic distclean-tags
505
506dvi: dvi-recursive
507
508dvi-am:
509
510html: html-recursive
511
512info: info-recursive
513
514info-am:
515
516install-data-am:
517
518install-dvi: install-dvi-recursive
519
520install-exec-am:
521
522install-html: install-html-recursive
523
524install-info: install-info-recursive
525
526install-man:
527
528install-pdf: install-pdf-recursive
529
530install-ps: install-ps-recursive
531
532installcheck-am:
533
534maintainer-clean: maintainer-clean-recursive
535	-rm -f Makefile
536maintainer-clean-am: distclean-am maintainer-clean-generic
537
538mostlyclean: mostlyclean-recursive
539
540mostlyclean-am: mostlyclean-generic mostlyclean-libtool
541
542pdf: pdf-recursive
543
544pdf-am:
545
546ps: ps-recursive
547
548ps-am:
549
550uninstall-am:
551
552.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
553	install-strip
554
555.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
556	all all-am check check-am clean clean-generic clean-libtool \
557	ctags ctags-recursive distclean distclean-generic \
558	distclean-libtool distclean-tags distdir dvi dvi-am html \
559	html-am info info-am install install-am install-data \
560	install-data-am install-dvi install-dvi-am install-exec \
561	install-exec-am install-html install-html-am install-info \
562	install-info-am install-man install-pdf install-pdf-am \
563	install-ps install-ps-am install-strip installcheck \
564	installcheck-am installdirs installdirs-am maintainer-clean \
565	maintainer-clean-generic mostlyclean mostlyclean-generic \
566	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
567	uninstall uninstall-am
568
569# Tell versions [3.59,3.63) of GNU make to not export all variables.
570# Otherwise a system limit (for SysV at least) may be exceeded.
571.NOEXPORT:
572