1/* ssl/ssl.h */ 2/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) 3 * All rights reserved. 4 * 5 * This package is an SSL implementation written 6 * by Eric Young (eay@cryptsoft.com). 7 * The implementation was written so as to conform with Netscapes SSL. 8 * 9 * This library is free for commercial and non-commercial use as long as 10 * the following conditions are aheared to. The following conditions 11 * apply to all code found in this distribution, be it the RC4, RSA, 12 * lhash, DES, etc., code; not just the SSL code. The SSL documentation 13 * included with this distribution is covered by the same copyright terms 14 * except that the holder is Tim Hudson (tjh@cryptsoft.com). 15 * 16 * Copyright remains Eric Young's, and as such any Copyright notices in 17 * the code are not to be removed. 18 * If this package is used in a product, Eric Young should be given attribution 19 * as the author of the parts of the library used. 20 * This can be in the form of a textual message at program startup or 21 * in documentation (online or textual) provided with the package. 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions 25 * are met: 26 * 1. Redistributions of source code must retain the copyright 27 * notice, this list of conditions and the following disclaimer. 28 * 2. Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in the 30 * documentation and/or other materials provided with the distribution. 31 * 3. All advertising materials mentioning features or use of this software 32 * must display the following acknowledgement: 33 * "This product includes cryptographic software written by 34 * Eric Young (eay@cryptsoft.com)" 35 * The word 'cryptographic' can be left out if the rouines from the library 36 * being used are not cryptographic related :-). 37 * 4. If you include any Windows specific code (or a derivative thereof) from 38 * the apps directory (application code) you must include an acknowledgement: 39 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" 40 * 41 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND 42 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 43 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 44 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 45 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 46 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 47 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 49 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 50 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 51 * SUCH DAMAGE. 52 * 53 * The licence and distribution terms for any publically available version or 54 * derivative of this code cannot be changed. i.e. this code cannot simply be 55 * copied and put under another distribution licence 56 * [including the GNU Public Licence.] 57 */ 58/* ==================================================================== 59 * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. 60 * 61 * Redistribution and use in source and binary forms, with or without 62 * modification, are permitted provided that the following conditions 63 * are met: 64 * 65 * 1. Redistributions of source code must retain the above copyright 66 * notice, this list of conditions and the following disclaimer. 67 * 68 * 2. Redistributions in binary form must reproduce the above copyright 69 * notice, this list of conditions and the following disclaimer in 70 * the documentation and/or other materials provided with the 71 * distribution. 72 * 73 * 3. All advertising materials mentioning features or use of this 74 * software must display the following acknowledgment: 75 * "This product includes software developed by the OpenSSL Project 76 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 77 * 78 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to 79 * endorse or promote products derived from this software without 80 * prior written permission. For written permission, please contact 81 * openssl-core@openssl.org. 82 * 83 * 5. Products derived from this software may not be called "OpenSSL" 84 * nor may "OpenSSL" appear in their names without prior written 85 * permission of the OpenSSL Project. 86 * 87 * 6. Redistributions of any form whatsoever must retain the following 88 * acknowledgment: 89 * "This product includes software developed by the OpenSSL Project 90 * for use in the OpenSSL Toolkit (http://www.openssl.org/)" 91 * 92 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY 93 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 94 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 95 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR 96 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 97 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 98 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 99 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 101 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 102 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 103 * OF THE POSSIBILITY OF SUCH DAMAGE. 104 * ==================================================================== 105 * 106 * This product includes cryptographic software written by Eric Young 107 * (eay@cryptsoft.com). This product includes software written by Tim 108 * Hudson (tjh@cryptsoft.com). 109 * 110 */ 111/* ==================================================================== 112 * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. 113 * 114 * Redistribution and use in source and binary forms, with or without 115 * modification, are permitted provided that the following conditions 116 * are met: 117 * 118 * 1. Redistributions of source code must retain the above copyright 119 * notice, this list of conditions and the following disclaimer. 120 * 121 * 2. Redistributions in binary form must reproduce the above copyright 122 * notice, this list of conditions and the following disclaimer in 123 * the documentation and/or other materials provided with the 124 * distribution. 125 * 126 * 3. All advertising materials mentioning features or use of this 127 * software must display the following acknowledgment: 128 * "This product includes software developed by the OpenSSL Project 129 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 130 * 131 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to 132 * endorse or promote products derived from this software without 133 * prior written permission. For written permission, please contact 134 * openssl-core@openssl.org. 135 * 136 * 5. Products derived from this software may not be called "OpenSSL" 137 * nor may "OpenSSL" appear in their names without prior written 138 * permission of the OpenSSL Project. 139 * 140 * 6. Redistributions of any form whatsoever must retain the following 141 * acknowledgment: 142 * "This product includes software developed by the OpenSSL Project 143 * for use in the OpenSSL Toolkit (http://www.openssl.org/)" 144 * 145 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY 146 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 147 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 148 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR 149 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 150 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 151 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 152 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 153 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 154 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 155 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 156 * OF THE POSSIBILITY OF SUCH DAMAGE. 157 * ==================================================================== 158 * 159 * This product includes cryptographic software written by Eric Young 160 * (eay@cryptsoft.com). This product includes software written by Tim 161 * Hudson (tjh@cryptsoft.com). 162 * 163 */ 164 165#ifndef HEADER_SSL_H 166#define HEADER_SSL_H 167 168#include <openssl/e_os2.h> 169 170#ifndef OPENSSL_NO_COMP 171#include <openssl/comp.h> 172#endif 173#ifndef OPENSSL_NO_BIO 174#include <openssl/bio.h> 175#endif 176#ifndef OPENSSL_NO_X509 177#include <openssl/x509.h> 178#endif 179#include <openssl/kssl.h> 180#include <openssl/safestack.h> 181#include <openssl/symhacks.h> 182 183#ifdef __cplusplus 184extern "C" { 185#endif 186 187/* SSLeay version number for ASN.1 encoding of the session information */ 188/* Version 0 - initial version 189 * Version 1 - added the optional peer certificate 190 */ 191#define SSL_SESSION_ASN1_VERSION 0x0001 192 193/* text strings for the ciphers */ 194#define SSL_TXT_NULL_WITH_MD5 SSL2_TXT_NULL_WITH_MD5 195#define SSL_TXT_RC4_128_WITH_MD5 SSL2_TXT_RC4_128_WITH_MD5 196#define SSL_TXT_RC4_128_EXPORT40_WITH_MD5 SSL2_TXT_RC4_128_EXPORT40_WITH_MD5 197#define SSL_TXT_RC2_128_CBC_WITH_MD5 SSL2_TXT_RC2_128_CBC_WITH_MD5 198#define SSL_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 SSL2_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 199#define SSL_TXT_IDEA_128_CBC_WITH_MD5 SSL2_TXT_IDEA_128_CBC_WITH_MD5 200#define SSL_TXT_DES_64_CBC_WITH_MD5 SSL2_TXT_DES_64_CBC_WITH_MD5 201#define SSL_TXT_DES_64_CBC_WITH_SHA SSL2_TXT_DES_64_CBC_WITH_SHA 202#define SSL_TXT_DES_192_EDE3_CBC_WITH_MD5 SSL2_TXT_DES_192_EDE3_CBC_WITH_MD5 203#define SSL_TXT_DES_192_EDE3_CBC_WITH_SHA SSL2_TXT_DES_192_EDE3_CBC_WITH_SHA 204 205/* VRS Additional Kerberos5 entries 206 */ 207#define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA 208#define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA 209#define SSL_TXT_KRB5_RC4_128_SHA SSL3_TXT_KRB5_RC4_128_SHA 210#define SSL_TXT_KRB5_IDEA_128_CBC_SHA SSL3_TXT_KRB5_IDEA_128_CBC_SHA 211#define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 212#define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 213#define SSL_TXT_KRB5_RC4_128_MD5 SSL3_TXT_KRB5_RC4_128_MD5 214#define SSL_TXT_KRB5_IDEA_128_CBC_MD5 SSL3_TXT_KRB5_IDEA_128_CBC_MD5 215 216#define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA 217#define SSL_TXT_KRB5_RC2_40_CBC_SHA SSL3_TXT_KRB5_RC2_40_CBC_SHA 218#define SSL_TXT_KRB5_RC4_40_SHA SSL3_TXT_KRB5_RC4_40_SHA 219#define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 220#define SSL_TXT_KRB5_RC2_40_CBC_MD5 SSL3_TXT_KRB5_RC2_40_CBC_MD5 221#define SSL_TXT_KRB5_RC4_40_MD5 SSL3_TXT_KRB5_RC4_40_MD5 222 223#define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA 224#define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 225#define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA 226#define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 227#define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA 228#define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 229#define SSL_MAX_KRB5_PRINCIPAL_LENGTH 256 230 231#define SSL_MAX_SSL_SESSION_ID_LENGTH 32 232#define SSL_MAX_SID_CTX_LENGTH 32 233 234#define SSL_MIN_RSA_MODULUS_LENGTH_IN_BYTES (512/8) 235#define SSL_MAX_KEY_ARG_LENGTH 8 236#define SSL_MAX_MASTER_KEY_LENGTH 48 237 238/* These are used to specify which ciphers to use and not to use */ 239#define SSL_TXT_LOW "LOW" 240#define SSL_TXT_MEDIUM "MEDIUM" 241#define SSL_TXT_HIGH "HIGH" 242#define SSL_TXT_FIPS "FIPS" 243#define SSL_TXT_kFZA "kFZA" 244#define SSL_TXT_aFZA "aFZA" 245#define SSL_TXT_eFZA "eFZA" 246#define SSL_TXT_FZA "FZA" 247 248#define SSL_TXT_aNULL "aNULL" 249#define SSL_TXT_eNULL "eNULL" 250#define SSL_TXT_NULL "NULL" 251 252#define SSL_TXT_kKRB5 "kKRB5" 253#define SSL_TXT_aKRB5 "aKRB5" 254#define SSL_TXT_KRB5 "KRB5" 255 256#define SSL_TXT_kRSA "kRSA" 257#define SSL_TXT_kDHr "kDHr" 258#define SSL_TXT_kDHd "kDHd" 259#define SSL_TXT_kEDH "kEDH" 260#define SSL_TXT_aRSA "aRSA" 261#define SSL_TXT_aDSS "aDSS" 262#define SSL_TXT_aDH "aDH" 263#define SSL_TXT_DSS "DSS" 264#define SSL_TXT_DH "DH" 265#define SSL_TXT_EDH "EDH" 266#define SSL_TXT_ADH "ADH" 267#define SSL_TXT_RSA "RSA" 268#define SSL_TXT_DES "DES" 269#define SSL_TXT_3DES "3DES" 270#define SSL_TXT_RC4 "RC4" 271#define SSL_TXT_RC2 "RC2" 272#define SSL_TXT_IDEA "IDEA" 273#define SSL_TXT_AES "AES" 274#define SSL_TXT_MD5 "MD5" 275#define SSL_TXT_SHA1 "SHA1" 276#define SSL_TXT_SHA "SHA" 277#define SSL_TXT_EXP "EXP" 278#define SSL_TXT_EXPORT "EXPORT" 279#define SSL_TXT_EXP40 "EXPORT40" 280#define SSL_TXT_EXP56 "EXPORT56" 281#define SSL_TXT_SSLV2 "SSLv2" 282#define SSL_TXT_SSLV3 "SSLv3" 283#define SSL_TXT_TLSV1 "TLSv1" 284#define SSL_TXT_ALL "ALL" 285 286/* 287 * COMPLEMENTOF* definitions. These identifiers are used to (de-select) 288 * ciphers normally not being used. 289 * Example: "RC4" will activate all ciphers using RC4 including ciphers 290 * without authentication, which would normally disabled by DEFAULT (due 291 * the "!ADH" being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT" 292 * will make sure that it is also disabled in the specific selection. 293 * COMPLEMENTOF* identifiers are portable between version, as adjustments 294 * to the default cipher setup will also be included here. 295 * 296 * COMPLEMENTOFDEFAULT does not experience the same special treatment that 297 * DEFAULT gets, as only selection is being done and no sorting as needed 298 * for DEFAULT. 299 */ 300#define SSL_TXT_CMPALL "COMPLEMENTOFALL" 301#define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT" 302 303/* The following cipher list is used by default. 304 * It also is substituted when an application-defined cipher list string 305 * starts with 'DEFAULT'. */ 306#define SSL_DEFAULT_CIPHER_LIST "ALL:!ADH:+RC4:@STRENGTH" /* low priority for RC4 */ 307 308/* Used in SSL_set_shutdown()/SSL_get_shutdown(); */ 309#define SSL_SENT_SHUTDOWN 1 310#define SSL_RECEIVED_SHUTDOWN 2 311 312#ifdef __cplusplus 313} 314#endif 315 316#include <openssl/crypto.h> 317#include <openssl/lhash.h> 318#include <openssl/buffer.h> 319#include <openssl/pem.h> 320 321#ifdef __cplusplus 322extern "C" { 323#endif 324 325#if (defined(OPENSSL_NO_RSA) || defined(OPENSSL_NO_MD5)) && !defined(OPENSSL_NO_SSL2) 326#define OPENSSL_NO_SSL2 327#endif 328 329#define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1 330#define SSL_FILETYPE_PEM X509_FILETYPE_PEM 331 332/* This is needed to stop compilers complaining about the 333 * 'struct ssl_st *' function parameters used to prototype callbacks 334 * in SSL_CTX. */ 335typedef struct ssl_st *ssl_crock_st; 336 337/* used to hold info on the particular ciphers used */ 338typedef struct ssl_cipher_st 339 { 340 int valid; 341 const char *name; /* text name */ 342 unsigned long id; /* id, 4 bytes, first is version */ 343 unsigned long algorithms; /* what ciphers are used */ 344 unsigned long algo_strength; /* strength and export flags */ 345 unsigned long algorithm2; /* Extra flags */ 346 int strength_bits; /* Number of bits really used */ 347 int alg_bits; /* Number of bits for algorithm */ 348 unsigned long mask; /* used for matching */ 349 unsigned long mask_strength; /* also used for matching */ 350 } SSL_CIPHER; 351 352DECLARE_STACK_OF(SSL_CIPHER) 353 354typedef struct ssl_st SSL; 355typedef struct ssl_ctx_st SSL_CTX; 356 357/* Used to hold functions for SSLv2 or SSLv3/TLSv1 functions */ 358typedef struct ssl_method_st 359 { 360 int version; 361 int (*ssl_new)(SSL *s); 362 void (*ssl_clear)(SSL *s); 363 void (*ssl_free)(SSL *s); 364 int (*ssl_accept)(SSL *s); 365 int (*ssl_connect)(SSL *s); 366 int (*ssl_read)(SSL *s,void *buf,int len); 367 int (*ssl_peek)(SSL *s,void *buf,int len); 368 int (*ssl_write)(SSL *s,const void *buf,int len); 369 int (*ssl_shutdown)(SSL *s); 370 int (*ssl_renegotiate)(SSL *s); 371 int (*ssl_renegotiate_check)(SSL *s); 372 long (*ssl_ctrl)(SSL *s,int cmd,long larg,void *parg); 373 long (*ssl_ctx_ctrl)(SSL_CTX *ctx,int cmd,long larg,void *parg); 374 SSL_CIPHER *(*get_cipher_by_char)(const unsigned char *ptr); 375 int (*put_cipher_by_char)(const SSL_CIPHER *cipher,unsigned char *ptr); 376 int (*ssl_pending)(SSL *s); 377 int (*num_ciphers)(void); 378 SSL_CIPHER *(*get_cipher)(unsigned ncipher); 379 struct ssl_method_st *(*get_ssl_method)(int version); 380 long (*get_timeout)(void); 381 struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */ 382 int (*ssl_version)(); 383 long (*ssl_callback_ctrl)(SSL *s, int cb_id, void (*fp)()); 384 long (*ssl_ctx_callback_ctrl)(SSL_CTX *s, int cb_id, void (*fp)()); 385 } SSL_METHOD; 386 387/* Lets make this into an ASN.1 type structure as follows 388 * SSL_SESSION_ID ::= SEQUENCE { 389 * version INTEGER, -- structure version number 390 * SSLversion INTEGER, -- SSL version number 391 * Cipher OCTET_STRING, -- the 3 byte cipher ID 392 * Session_ID OCTET_STRING, -- the Session ID 393 * Master_key OCTET_STRING, -- the master key 394 * KRB5_principal OCTET_STRING -- optional Kerberos principal 395 * Key_Arg [ 0 ] IMPLICIT OCTET_STRING, -- the optional Key argument 396 * Time [ 1 ] EXPLICIT INTEGER, -- optional Start Time 397 * Timeout [ 2 ] EXPLICIT INTEGER, -- optional Timeout ins seconds 398 * Peer [ 3 ] EXPLICIT X509, -- optional Peer Certificate 399 * Session_ID_context [ 4 ] EXPLICIT OCTET_STRING, -- the Session ID context 400 * Verify_result [ 5 ] EXPLICIT INTEGER -- X509_V_... code for `Peer' 401 * Compression [6] IMPLICIT ASN1_OBJECT -- compression OID XXXXX 402 * } 403 * Look in ssl/ssl_asn1.c for more details 404 * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-). 405 */ 406typedef struct ssl_session_st 407 { 408 int ssl_version; /* what ssl version session info is 409 * being kept in here? */ 410 411 /* only really used in SSLv2 */ 412 unsigned int key_arg_length; 413 unsigned char key_arg[SSL_MAX_KEY_ARG_LENGTH]; 414 int master_key_length; 415 unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; 416 /* session_id - valid? */ 417 unsigned int session_id_length; 418 unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; 419 /* this is used to determine whether the session is being reused in 420 * the appropriate context. It is up to the application to set this, 421 * via SSL_new */ 422 unsigned int sid_ctx_length; 423 unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; 424 425#ifndef OPENSSL_NO_KRB5 426 unsigned int krb5_client_princ_len; 427 unsigned char krb5_client_princ[SSL_MAX_KRB5_PRINCIPAL_LENGTH]; 428#endif /* OPENSSL_NO_KRB5 */ 429 430 int not_resumable; 431 432 /* The cert is the certificate used to establish this connection */ 433 struct sess_cert_st /* SESS_CERT */ *sess_cert; 434 435 /* This is the cert for the other end. 436 * On clients, it will be the same as sess_cert->peer_key->x509 437 * (the latter is not enough as sess_cert is not retained 438 * in the external representation of sessions, see ssl_asn1.c). */ 439 X509 *peer; 440 /* when app_verify_callback accepts a session where the peer's certificate 441 * is not ok, we must remember the error for session reuse: */ 442 long verify_result; /* only for servers */ 443 444 int references; 445 long timeout; 446 long time; 447 448 int compress_meth; /* Need to lookup the method */ 449 450 SSL_CIPHER *cipher; 451 unsigned long cipher_id; /* when ASN.1 loaded, this 452 * needs to be used to load 453 * the 'cipher' structure */ 454 455 STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */ 456 457 CRYPTO_EX_DATA ex_data; /* application specific data */ 458 459 /* These are used to make removal of session-ids more 460 * efficient and to implement a maximum cache size. */ 461 struct ssl_session_st *prev,*next; 462 } SSL_SESSION; 463 464 465#define SSL_OP_MICROSOFT_SESS_ID_BUG 0x00000001L 466#define SSL_OP_NETSCAPE_CHALLENGE_BUG 0x00000002L 467#define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0x00000008L 468#define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0x00000010L 469#define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0x00000020L 470#define SSL_OP_MSIE_SSLV2_RSA_PADDING 0x00000040L 471#define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0x00000080L 472#define SSL_OP_TLS_D5_BUG 0x00000100L 473#define SSL_OP_TLS_BLOCK_PADDING_BUG 0x00000200L 474 475/* Disable SSL 3.0/TLS 1.0 CBC vulnerability workaround that was added 476 * in OpenSSL 0.9.6d. Usually (depending on the application protocol) 477 * the workaround is not needed. Unfortunately some broken SSL/TLS 478 * implementations cannot handle it at all, which is why we include 479 * it in SSL_OP_ALL. */ 480#define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0x00000800L /* added in 0.9.6e */ 481 482/* SSL_OP_ALL: various bug workarounds that should be rather harmless. 483 * This used to be 0x000FFFFFL before 0.9.7. */ 484#define SSL_OP_ALL 0x00000FFFL 485 486/* As server, disallow session resumption on renegotiation */ 487#define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0x00010000L 488/* If set, always create a new key when using tmp_dh parameters */ 489#define SSL_OP_SINGLE_DH_USE 0x00100000L 490/* Set to always use the tmp_rsa key when doing RSA operations, 491 * even when this violates protocol specs */ 492#define SSL_OP_EPHEMERAL_RSA 0x00200000L 493/* Set on servers to choose the cipher according to the server's 494 * preferences */ 495#define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L 496/* If set, a server will allow a client to issue a SSLv3.0 version number 497 * as latest version supported in the premaster secret, even when TLSv1.0 498 * (version 3.1) was announced in the client hello. Normally this is 499 * forbidden to prevent version rollback attacks. */ 500#define SSL_OP_TLS_ROLLBACK_BUG 0x00800000L 501 502#define SSL_OP_NO_SSLv2 0x01000000L 503#define SSL_OP_NO_SSLv3 0x02000000L 504#define SSL_OP_NO_TLSv1 0x04000000L 505 506/* The next flag deliberately changes the ciphertest, this is a check 507 * for the PKCS#1 attack */ 508#define SSL_OP_PKCS1_CHECK_1 0x08000000L 509#define SSL_OP_PKCS1_CHECK_2 0x10000000L 510#define SSL_OP_NETSCAPE_CA_DN_BUG 0x20000000L 511#define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0x40000000L 512 513 514/* Allow SSL_write(..., n) to return r with 0 < r < n (i.e. report success 515 * when just a single record has been written): */ 516#define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L 517/* Make it possible to retry SSL_write() with changed buffer location 518 * (buffer contents must stay the same!); this is not the default to avoid 519 * the misconception that non-blocking SSL_write() behaves like 520 * non-blocking write(): */ 521#define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L 522/* Never bother the application with retries if the transport 523 * is blocking: */ 524#define SSL_MODE_AUTO_RETRY 0x00000004L 525/* Don't attempt to automatically build certificate chain */ 526#define SSL_MODE_NO_AUTO_CHAIN 0x00000008L 527 528 529/* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value, 530 * they cannot be used to clear bits. */ 531 532#define SSL_CTX_set_options(ctx,op) \ 533 SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,(op),NULL) 534#define SSL_CTX_get_options(ctx) \ 535 SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,0,NULL) 536#define SSL_set_options(ssl,op) \ 537 SSL_ctrl((ssl),SSL_CTRL_OPTIONS,(op),NULL) 538#define SSL_get_options(ssl) \ 539 SSL_ctrl((ssl),SSL_CTRL_OPTIONS,0,NULL) 540 541#define SSL_CTX_set_mode(ctx,op) \ 542 SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL) 543#define SSL_CTX_get_mode(ctx) \ 544 SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,0,NULL) 545#define SSL_set_mode(ssl,op) \ 546 SSL_ctrl((ssl),SSL_CTRL_MODE,(op),NULL) 547#define SSL_get_mode(ssl) \ 548 SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL) 549 550 551void SSL_CTX_set_msg_callback(SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); 552void SSL_set_msg_callback(SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); 553#define SSL_CTX_set_msg_callback_arg(ctx, arg) SSL_CTX_ctrl((ctx), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) 554#define SSL_set_msg_callback_arg(ssl, arg) SSL_ctrl((ssl), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) 555 556 557 558#if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32) 559#define SSL_MAX_CERT_LIST_DEFAULT 1024*30 /* 30k max cert list :-) */ 560#else 561#define SSL_MAX_CERT_LIST_DEFAULT 1024*100 /* 100k max cert list :-) */ 562#endif 563 564#define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024*20) 565 566/* This callback type is used inside SSL_CTX, SSL, and in the functions that set 567 * them. It is used to override the generation of SSL/TLS session IDs in a 568 * server. Return value should be zero on an error, non-zero to proceed. Also, 569 * callbacks should themselves check if the id they generate is unique otherwise 570 * the SSL handshake will fail with an error - callbacks can do this using the 571 * 'ssl' value they're passed by; 572 * SSL_has_matching_session_id(ssl, id, *id_len) 573 * The length value passed in is set at the maximum size the session ID can be. 574 * In SSLv2 this is 16 bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback 575 * can alter this length to be less if desired, but under SSLv2 session IDs are 576 * supposed to be fixed at 16 bytes so the id will be padded after the callback 577 * returns in this case. It is also an error for the callback to set the size to 578 * zero. */ 579typedef int (*GEN_SESSION_CB)(const SSL *ssl, unsigned char *id, 580 unsigned int *id_len); 581 582typedef struct ssl_comp_st 583 { 584 int id; 585 char *name; 586#ifndef OPENSSL_NO_COMP 587 COMP_METHOD *method; 588#else 589 char *method; 590#endif 591 } SSL_COMP; 592 593DECLARE_STACK_OF(SSL_COMP) 594 595struct ssl_ctx_st 596 { 597 SSL_METHOD *method; 598 599 STACK_OF(SSL_CIPHER) *cipher_list; 600 /* same as above but sorted for lookup */ 601 STACK_OF(SSL_CIPHER) *cipher_list_by_id; 602 603 struct x509_store_st /* X509_STORE */ *cert_store; 604 struct lhash_st /* LHASH */ *sessions; /* a set of SSL_SESSIONs */ 605 /* Most session-ids that will be cached, default is 606 * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */ 607 unsigned long session_cache_size; 608 struct ssl_session_st *session_cache_head; 609 struct ssl_session_st *session_cache_tail; 610 611 /* This can have one of 2 values, ored together, 612 * SSL_SESS_CACHE_CLIENT, 613 * SSL_SESS_CACHE_SERVER, 614 * Default is SSL_SESSION_CACHE_SERVER, which means only 615 * SSL_accept which cache SSL_SESSIONS. */ 616 int session_cache_mode; 617 618 /* If timeout is not 0, it is the default timeout value set 619 * when SSL_new() is called. This has been put in to make 620 * life easier to set things up */ 621 long session_timeout; 622 623 /* If this callback is not null, it will be called each 624 * time a session id is added to the cache. If this function 625 * returns 1, it means that the callback will do a 626 * SSL_SESSION_free() when it has finished using it. Otherwise, 627 * on 0, it means the callback has finished with it. 628 * If remove_session_cb is not null, it will be called when 629 * a session-id is removed from the cache. After the call, 630 * OpenSSL will SSL_SESSION_free() it. */ 631 int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess); 632 void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess); 633 SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl, 634 unsigned char *data,int len,int *copy); 635 636 struct 637 { 638 int sess_connect; /* SSL new conn - started */ 639 int sess_connect_renegotiate;/* SSL reneg - requested */ 640 int sess_connect_good; /* SSL new conne/reneg - finished */ 641 int sess_accept; /* SSL new accept - started */ 642 int sess_accept_renegotiate;/* SSL reneg - requested */ 643 int sess_accept_good; /* SSL accept/reneg - finished */ 644 int sess_miss; /* session lookup misses */ 645 int sess_timeout; /* reuse attempt on timeouted session */ 646 int sess_cache_full; /* session removed due to full cache */ 647 int sess_hit; /* session reuse actually done */ 648 int sess_cb_hit; /* session-id that was not 649 * in the cache was 650 * passed back via the callback. This 651 * indicates that the application is 652 * supplying session-id's from other 653 * processes - spooky :-) */ 654 } stats; 655 656 int references; 657 658 /* if defined, these override the X509_verify_cert() calls */ 659 int (*app_verify_callback)(X509_STORE_CTX *, void *); 660 void *app_verify_arg; 661 /* before OpenSSL 0.9.7, 'app_verify_arg' was ignored 662 * ('app_verify_callback' was called with just one argument) */ 663 664 /* Default password callback. */ 665 pem_password_cb *default_passwd_callback; 666 667 /* Default password callback user data. */ 668 void *default_passwd_callback_userdata; 669 670 /* get client cert callback */ 671 int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey); 672 673 CRYPTO_EX_DATA ex_data; 674 675 const EVP_MD *rsa_md5;/* For SSLv2 - name is 'ssl2-md5' */ 676 const EVP_MD *md5; /* For SSLv3/TLSv1 'ssl3-md5' */ 677 const EVP_MD *sha1; /* For SSLv3/TLSv1 'ssl3->sha1' */ 678 679 STACK_OF(X509) *extra_certs; 680 STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ 681 682 683 /* Default values used when no per-SSL value is defined follow */ 684 685 void (*info_callback)(const SSL *ssl,int type,int val); /* used if SSL's info_callback is NULL */ 686 687 /* what we put in client cert requests */ 688 STACK_OF(X509_NAME) *client_CA; 689 690 691 /* Default values to use in SSL structures follow (these are copied by SSL_new) */ 692 693 unsigned long options; 694 unsigned long mode; 695 long max_cert_list; 696 697 struct cert_st /* CERT */ *cert; 698 int read_ahead; 699 700 /* callback that allows applications to peek at protocol messages */ 701 void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); 702 void *msg_callback_arg; 703 704 int verify_mode; 705 int verify_depth; 706 unsigned int sid_ctx_length; 707 unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; 708 int (*default_verify_callback)(int ok,X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */ 709 710 /* Default generate session ID callback. */ 711 GEN_SESSION_CB generate_session_id; 712 713 int purpose; /* Purpose setting */ 714 int trust; /* Trust setting */ 715 716 int quiet_shutdown; 717 }; 718 719#define SSL_SESS_CACHE_OFF 0x0000 720#define SSL_SESS_CACHE_CLIENT 0x0001 721#define SSL_SESS_CACHE_SERVER 0x0002 722#define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT|SSL_SESS_CACHE_SERVER) 723#define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080 724/* enough comments already ... see SSL_CTX_set_session_cache_mode(3) */ 725#define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100 726#define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200 727#define SSL_SESS_CACHE_NO_INTERNAL \ 728 (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP|SSL_SESS_CACHE_NO_INTERNAL_STORE) 729 730 struct lhash_st *SSL_CTX_sessions(SSL_CTX *ctx); 731#define SSL_CTX_sess_number(ctx) \ 732 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_NUMBER,0,NULL) 733#define SSL_CTX_sess_connect(ctx) \ 734 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT,0,NULL) 735#define SSL_CTX_sess_connect_good(ctx) \ 736 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_GOOD,0,NULL) 737#define SSL_CTX_sess_connect_renegotiate(ctx) \ 738 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_RENEGOTIATE,0,NULL) 739#define SSL_CTX_sess_accept(ctx) \ 740 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT,0,NULL) 741#define SSL_CTX_sess_accept_renegotiate(ctx) \ 742 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_RENEGOTIATE,0,NULL) 743#define SSL_CTX_sess_accept_good(ctx) \ 744 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_GOOD,0,NULL) 745#define SSL_CTX_sess_hits(ctx) \ 746 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_HIT,0,NULL) 747#define SSL_CTX_sess_cb_hits(ctx) \ 748 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CB_HIT,0,NULL) 749#define SSL_CTX_sess_misses(ctx) \ 750 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_MISSES,0,NULL) 751#define SSL_CTX_sess_timeouts(ctx) \ 752 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_TIMEOUTS,0,NULL) 753#define SSL_CTX_sess_cache_full(ctx) \ 754 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CACHE_FULL,0,NULL) 755 756#define SSL_CTX_sess_set_new_cb(ctx,cb) ((ctx)->new_session_cb=(cb)) 757#define SSL_CTX_sess_get_new_cb(ctx) ((ctx)->new_session_cb) 758#define SSL_CTX_sess_set_remove_cb(ctx,cb) ((ctx)->remove_session_cb=(cb)) 759#define SSL_CTX_sess_get_remove_cb(ctx) ((ctx)->remove_session_cb) 760#define SSL_CTX_sess_set_get_cb(ctx,cb) ((ctx)->get_session_cb=(cb)) 761#define SSL_CTX_sess_get_get_cb(ctx) ((ctx)->get_session_cb) 762#define SSL_CTX_set_info_callback(ctx,cb) ((ctx)->info_callback=(cb)) 763#define SSL_CTX_get_info_callback(ctx) ((ctx)->info_callback) 764#define SSL_CTX_set_client_cert_cb(ctx,cb) ((ctx)->client_cert_cb=(cb)) 765#define SSL_CTX_get_client_cert_cb(ctx) ((ctx)->client_cert_cb) 766 767#define SSL_NOTHING 1 768#define SSL_WRITING 2 769#define SSL_READING 3 770#define SSL_X509_LOOKUP 4 771 772/* These will only be used when doing non-blocking IO */ 773#define SSL_want_nothing(s) (SSL_want(s) == SSL_NOTHING) 774#define SSL_want_read(s) (SSL_want(s) == SSL_READING) 775#define SSL_want_write(s) (SSL_want(s) == SSL_WRITING) 776#define SSL_want_x509_lookup(s) (SSL_want(s) == SSL_X509_LOOKUP) 777 778struct ssl_st 779 { 780 /* protocol version 781 * (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION) 782 */ 783 int version; 784 int type; /* SSL_ST_CONNECT or SSL_ST_ACCEPT */ 785 786 SSL_METHOD *method; /* SSLv3 */ 787 788 /* There are 2 BIO's even though they are normally both the 789 * same. This is so data can be read and written to different 790 * handlers */ 791 792#ifndef OPENSSL_NO_BIO 793 BIO *rbio; /* used by SSL_read */ 794 BIO *wbio; /* used by SSL_write */ 795 BIO *bbio; /* used during session-id reuse to concatenate 796 * messages */ 797#else 798 char *rbio; /* used by SSL_read */ 799 char *wbio; /* used by SSL_write */ 800 char *bbio; 801#endif 802 /* This holds a variable that indicates what we were doing 803 * when a 0 or -1 is returned. This is needed for 804 * non-blocking IO so we know what request needs re-doing when 805 * in SSL_accept or SSL_connect */ 806 int rwstate; 807 808 /* true when we are actually in SSL_accept() or SSL_connect() */ 809 int in_handshake; 810 int (*handshake_func)(); 811 812 /* Imagine that here's a boolean member "init" that is 813 * switched as soon as SSL_set_{accept/connect}_state 814 * is called for the first time, so that "state" and 815 * "handshake_func" are properly initialized. But as 816 * handshake_func is == 0 until then, we use this 817 * test instead of an "init" member. 818 */ 819 820 int server; /* are we the server side? - mostly used by SSL_clear*/ 821 822 int new_session;/* 1 if we are to use a new session. 823 * 2 if we are a server and are inside a handshake 824 * (i.e. not just sending a HelloRequest) 825 * NB: For servers, the 'new' session may actually be a previously 826 * cached session or even the previous session unless 827 * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */ 828 int quiet_shutdown;/* don't send shutdown packets */ 829 int shutdown; /* we have shut things down, 0x01 sent, 0x02 830 * for received */ 831 int state; /* where we are */ 832 int rstate; /* where we are when reading */ 833 834 BUF_MEM *init_buf; /* buffer used during init */ 835 void *init_msg; /* pointer to handshake message body, set by ssl3_get_message() */ 836 int init_num; /* amount read/written */ 837 int init_off; /* amount read/written */ 838 839 /* used internally to point at a raw packet */ 840 unsigned char *packet; 841 unsigned int packet_length; 842 843 struct ssl2_state_st *s2; /* SSLv2 variables */ 844 struct ssl3_state_st *s3; /* SSLv3 variables */ 845 846 int read_ahead; /* Read as many input bytes as possible 847 * (for non-blocking reads) */ 848 849 /* callback that allows applications to peek at protocol messages */ 850 void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); 851 void *msg_callback_arg; 852 853 int hit; /* reusing a previous session */ 854 855 int purpose; /* Purpose setting */ 856 int trust; /* Trust setting */ 857 858 /* crypto */ 859 STACK_OF(SSL_CIPHER) *cipher_list; 860 STACK_OF(SSL_CIPHER) *cipher_list_by_id; 861 862 /* These are the ones being used, the ones in SSL_SESSION are 863 * the ones to be 'copied' into these ones */ 864 865 EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */ 866 const EVP_MD *read_hash; /* used for mac generation */ 867#ifndef OPENSSL_NO_COMP 868 COMP_CTX *expand; /* uncompress */ 869#else 870 char *expand; 871#endif 872 873 EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ 874 const EVP_MD *write_hash; /* used for mac generation */ 875#ifndef OPENSSL_NO_COMP 876 COMP_CTX *compress; /* compression */ 877#else 878 char *compress; 879#endif 880 881 /* session info */ 882 883 /* client cert? */ 884 /* This is used to hold the server certificate used */ 885 struct cert_st /* CERT */ *cert; 886 887 /* the session_id_context is used to ensure sessions are only reused 888 * in the appropriate context */ 889 unsigned int sid_ctx_length; 890 unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; 891 892 /* This can also be in the session once a session is established */ 893 SSL_SESSION *session; 894 895 /* Default generate session ID callback. */ 896 GEN_SESSION_CB generate_session_id; 897 898 /* Used in SSL2 and SSL3 */ 899 int verify_mode; /* 0 don't care about verify failure. 900 * 1 fail if verify fails */ 901 int verify_depth; 902 int (*verify_callback)(int ok,X509_STORE_CTX *ctx); /* fail if callback returns 0 */ 903 904 void (*info_callback)(const SSL *ssl,int type,int val); /* optional informational callback */ 905 906 int error; /* error bytes to be written */ 907 int error_code; /* actual code */ 908 909#ifndef OPENSSL_NO_KRB5 910 KSSL_CTX *kssl_ctx; /* Kerberos 5 context */ 911#endif /* OPENSSL_NO_KRB5 */ 912 913 SSL_CTX *ctx; 914 /* set this flag to 1 and a sleep(1) is put into all SSL_read() 915 * and SSL_write() calls, good for nbio debuging :-) */ 916 int debug; 917 918 /* extra application data */ 919 long verify_result; 920 CRYPTO_EX_DATA ex_data; 921 922 /* for server side, keep the list of CA_dn we can use */ 923 STACK_OF(X509_NAME) *client_CA; 924 925 int references; 926 unsigned long options; /* protocol behaviour */ 927 unsigned long mode; /* API behaviour */ 928 long max_cert_list; 929 int first_packet; 930 int client_version; /* what was passed, used for 931 * SSLv3/TLS rollback check */ 932 }; 933 934#ifdef __cplusplus 935} 936#endif 937 938#include <openssl/ssl2.h> 939#include <openssl/ssl3.h> 940#include <openssl/tls1.h> /* This is mostly sslv3 with a few tweaks */ 941#include <openssl/ssl23.h> 942 943#ifdef __cplusplus 944extern "C" { 945#endif 946 947/* compatibility */ 948#define SSL_set_app_data(s,arg) (SSL_set_ex_data(s,0,(char *)arg)) 949#define SSL_get_app_data(s) (SSL_get_ex_data(s,0)) 950#define SSL_SESSION_set_app_data(s,a) (SSL_SESSION_set_ex_data(s,0,(char *)a)) 951#define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s,0)) 952#define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx,0)) 953#define SSL_CTX_set_app_data(ctx,arg) (SSL_CTX_set_ex_data(ctx,0,(char *)arg)) 954 955/* The following are the possible values for ssl->state are are 956 * used to indicate where we are up to in the SSL connection establishment. 957 * The macros that follow are about the only things you should need to use 958 * and even then, only when using non-blocking IO. 959 * It can also be useful to work out where you were when the connection 960 * failed */ 961 962#define SSL_ST_CONNECT 0x1000 963#define SSL_ST_ACCEPT 0x2000 964#define SSL_ST_MASK 0x0FFF 965#define SSL_ST_INIT (SSL_ST_CONNECT|SSL_ST_ACCEPT) 966#define SSL_ST_BEFORE 0x4000 967#define SSL_ST_OK 0x03 968#define SSL_ST_RENEGOTIATE (0x04|SSL_ST_INIT) 969 970#define SSL_CB_LOOP 0x01 971#define SSL_CB_EXIT 0x02 972#define SSL_CB_READ 0x04 973#define SSL_CB_WRITE 0x08 974#define SSL_CB_ALERT 0x4000 /* used in callback */ 975#define SSL_CB_READ_ALERT (SSL_CB_ALERT|SSL_CB_READ) 976#define SSL_CB_WRITE_ALERT (SSL_CB_ALERT|SSL_CB_WRITE) 977#define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT|SSL_CB_LOOP) 978#define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT|SSL_CB_EXIT) 979#define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT|SSL_CB_LOOP) 980#define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT|SSL_CB_EXIT) 981#define SSL_CB_HANDSHAKE_START 0x10 982#define SSL_CB_HANDSHAKE_DONE 0x20 983 984/* Is the SSL_connection established? */ 985#define SSL_get_state(a) SSL_state(a) 986#define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK) 987#define SSL_in_init(a) (SSL_state(a)&SSL_ST_INIT) 988#define SSL_in_before(a) (SSL_state(a)&SSL_ST_BEFORE) 989#define SSL_in_connect_init(a) (SSL_state(a)&SSL_ST_CONNECT) 990#define SSL_in_accept_init(a) (SSL_state(a)&SSL_ST_ACCEPT) 991 992/* The following 2 states are kept in ssl->rstate when reads fail, 993 * you should not need these */ 994#define SSL_ST_READ_HEADER 0xF0 995#define SSL_ST_READ_BODY 0xF1 996#define SSL_ST_READ_DONE 0xF2 997 998/* Obtain latest Finished message 999 * -- that we sent (SSL_get_finished) 1000 * -- that we expected from peer (SSL_get_peer_finished). 1001 * Returns length (0 == no Finished so far), copies up to 'count' bytes. */ 1002size_t SSL_get_finished(SSL *s, void *buf, size_t count); 1003size_t SSL_get_peer_finished(SSL *s, void *buf, size_t count); 1004 1005/* use either SSL_VERIFY_NONE or SSL_VERIFY_PEER, the last 2 options 1006 * are 'ored' with SSL_VERIFY_PEER if they are desired */ 1007#define SSL_VERIFY_NONE 0x00 1008#define SSL_VERIFY_PEER 0x01 1009#define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02 1010#define SSL_VERIFY_CLIENT_ONCE 0x04 1011 1012#define OpenSSL_add_ssl_algorithms() SSL_library_init() 1013#define SSLeay_add_ssl_algorithms() SSL_library_init() 1014 1015/* this is for backward compatibility */ 1016#if 0 /* NEW_SSLEAY */ 1017#define SSL_CTX_set_default_verify(a,b,c) SSL_CTX_set_verify(a,b,c) 1018#define SSL_set_pref_cipher(c,n) SSL_set_cipher_list(c,n) 1019#define SSL_add_session(a,b) SSL_CTX_add_session((a),(b)) 1020#define SSL_remove_session(a,b) SSL_CTX_remove_session((a),(b)) 1021#define SSL_flush_sessions(a,b) SSL_CTX_flush_sessions((a),(b)) 1022#endif 1023/* More backward compatibility */ 1024#define SSL_get_cipher(s) \ 1025 SSL_CIPHER_get_name(SSL_get_current_cipher(s)) 1026#define SSL_get_cipher_bits(s,np) \ 1027 SSL_CIPHER_get_bits(SSL_get_current_cipher(s),np) 1028#define SSL_get_cipher_version(s) \ 1029 SSL_CIPHER_get_version(SSL_get_current_cipher(s)) 1030#define SSL_get_cipher_name(s) \ 1031 SSL_CIPHER_get_name(SSL_get_current_cipher(s)) 1032#define SSL_get_time(a) SSL_SESSION_get_time(a) 1033#define SSL_set_time(a,b) SSL_SESSION_set_time((a),(b)) 1034#define SSL_get_timeout(a) SSL_SESSION_get_timeout(a) 1035#define SSL_set_timeout(a,b) SSL_SESSION_set_timeout((a),(b)) 1036 1037#if 1 /*SSLEAY_MACROS*/ 1038#define d2i_SSL_SESSION_bio(bp,s_id) (SSL_SESSION *)ASN1_d2i_bio( \ 1039 (char *(*)())SSL_SESSION_new,(char *(*)())d2i_SSL_SESSION, \ 1040 (bp),(unsigned char **)(s_id)) 1041#define i2d_SSL_SESSION_bio(bp,s_id) ASN1_i2d_bio(i2d_SSL_SESSION, \ 1042 bp,(unsigned char *)s_id) 1043#define PEM_read_SSL_SESSION(fp,x,cb,u) (SSL_SESSION *)PEM_ASN1_read( \ 1044 (char *(*)())d2i_SSL_SESSION,PEM_STRING_SSL_SESSION,fp,(char **)x,cb,u) 1045#define PEM_read_bio_SSL_SESSION(bp,x,cb,u) (SSL_SESSION *)PEM_ASN1_read_bio( \ 1046 (char *(*)())d2i_SSL_SESSION,PEM_STRING_SSL_SESSION,bp,(char **)x,cb,u) 1047#define PEM_write_SSL_SESSION(fp,x) \ 1048 PEM_ASN1_write((int (*)())i2d_SSL_SESSION, \ 1049 PEM_STRING_SSL_SESSION,fp, (char *)x, NULL,NULL,0,NULL,NULL) 1050#define PEM_write_bio_SSL_SESSION(bp,x) \ 1051 PEM_ASN1_write_bio((int (*)())i2d_SSL_SESSION, \ 1052 PEM_STRING_SSL_SESSION,bp, (char *)x, NULL,NULL,0,NULL,NULL) 1053#endif 1054 1055#define SSL_AD_REASON_OFFSET 1000 1056/* These alert types are for SSLv3 and TLSv1 */ 1057#define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY 1058#define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE /* fatal */ 1059#define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC /* fatal */ 1060#define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED 1061#define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW 1062#define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE/* fatal */ 1063#define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE/* fatal */ 1064#define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not for TLS */ 1065#define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE 1066#define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE 1067#define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED 1068#define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED 1069#define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN 1070#define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER /* fatal */ 1071#define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA /* fatal */ 1072#define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED /* fatal */ 1073#define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR /* fatal */ 1074#define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR 1075#define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION/* fatal */ 1076#define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION /* fatal */ 1077#define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY/* fatal */ 1078#define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR /* fatal */ 1079#define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED 1080#define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION 1081 1082#define SSL_ERROR_NONE 0 1083#define SSL_ERROR_SSL 1 1084#define SSL_ERROR_WANT_READ 2 1085#define SSL_ERROR_WANT_WRITE 3 1086#define SSL_ERROR_WANT_X509_LOOKUP 4 1087#define SSL_ERROR_SYSCALL 5 /* look at error stack/return value/errno */ 1088#define SSL_ERROR_ZERO_RETURN 6 1089#define SSL_ERROR_WANT_CONNECT 7 1090#define SSL_ERROR_WANT_ACCEPT 8 1091 1092#define SSL_CTRL_NEED_TMP_RSA 1 1093#define SSL_CTRL_SET_TMP_RSA 2 1094#define SSL_CTRL_SET_TMP_DH 3 1095#define SSL_CTRL_SET_TMP_RSA_CB 4 1096#define SSL_CTRL_SET_TMP_DH_CB 5 1097 1098#define SSL_CTRL_GET_SESSION_REUSED 6 1099#define SSL_CTRL_GET_CLIENT_CERT_REQUEST 7 1100#define SSL_CTRL_GET_NUM_RENEGOTIATIONS 8 1101#define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS 9 1102#define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS 10 1103#define SSL_CTRL_GET_FLAGS 11 1104#define SSL_CTRL_EXTRA_CHAIN_CERT 12 1105 1106#define SSL_CTRL_SET_MSG_CALLBACK 13 1107#define SSL_CTRL_SET_MSG_CALLBACK_ARG 14 1108 1109/* Stats */ 1110#define SSL_CTRL_SESS_NUMBER 20 1111#define SSL_CTRL_SESS_CONNECT 21 1112#define SSL_CTRL_SESS_CONNECT_GOOD 22 1113#define SSL_CTRL_SESS_CONNECT_RENEGOTIATE 23 1114#define SSL_CTRL_SESS_ACCEPT 24 1115#define SSL_CTRL_SESS_ACCEPT_GOOD 25 1116#define SSL_CTRL_SESS_ACCEPT_RENEGOTIATE 26 1117#define SSL_CTRL_SESS_HIT 27 1118#define SSL_CTRL_SESS_CB_HIT 28 1119#define SSL_CTRL_SESS_MISSES 29 1120#define SSL_CTRL_SESS_TIMEOUTS 30 1121#define SSL_CTRL_SESS_CACHE_FULL 31 1122#define SSL_CTRL_OPTIONS 32 1123#define SSL_CTRL_MODE 33 1124 1125#define SSL_CTRL_GET_READ_AHEAD 40 1126#define SSL_CTRL_SET_READ_AHEAD 41 1127#define SSL_CTRL_SET_SESS_CACHE_SIZE 42 1128#define SSL_CTRL_GET_SESS_CACHE_SIZE 43 1129#define SSL_CTRL_SET_SESS_CACHE_MODE 44 1130#define SSL_CTRL_GET_SESS_CACHE_MODE 45 1131 1132#define SSL_CTRL_GET_MAX_CERT_LIST 50 1133#define SSL_CTRL_SET_MAX_CERT_LIST 51 1134 1135#define SSL_session_reused(ssl) \ 1136 SSL_ctrl((ssl),SSL_CTRL_GET_SESSION_REUSED,0,NULL) 1137#define SSL_num_renegotiations(ssl) \ 1138 SSL_ctrl((ssl),SSL_CTRL_GET_NUM_RENEGOTIATIONS,0,NULL) 1139#define SSL_clear_num_renegotiations(ssl) \ 1140 SSL_ctrl((ssl),SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS,0,NULL) 1141#define SSL_total_renegotiations(ssl) \ 1142 SSL_ctrl((ssl),SSL_CTRL_GET_TOTAL_RENEGOTIATIONS,0,NULL) 1143 1144#define SSL_CTX_need_tmp_RSA(ctx) \ 1145 SSL_CTX_ctrl(ctx,SSL_CTRL_NEED_TMP_RSA,0,NULL) 1146#define SSL_CTX_set_tmp_rsa(ctx,rsa) \ 1147 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) 1148#define SSL_CTX_set_tmp_dh(ctx,dh) \ 1149 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_DH,0,(char *)dh) 1150 1151#define SSL_need_tmp_RSA(ssl) \ 1152 SSL_ctrl(ssl,SSL_CTRL_NEED_TMP_RSA,0,NULL) 1153#define SSL_set_tmp_rsa(ssl,rsa) \ 1154 SSL_ctrl(ssl,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) 1155#define SSL_set_tmp_dh(ssl,dh) \ 1156 SSL_ctrl(ssl,SSL_CTRL_SET_TMP_DH,0,(char *)dh) 1157 1158#define SSL_CTX_add_extra_chain_cert(ctx,x509) \ 1159 SSL_CTX_ctrl(ctx,SSL_CTRL_EXTRA_CHAIN_CERT,0,(char *)x509) 1160 1161#ifndef OPENSSL_NO_BIO 1162BIO_METHOD *BIO_f_ssl(void); 1163BIO *BIO_new_ssl(SSL_CTX *ctx,int client); 1164BIO *BIO_new_ssl_connect(SSL_CTX *ctx); 1165BIO *BIO_new_buffer_ssl_connect(SSL_CTX *ctx); 1166int BIO_ssl_copy_session_id(BIO *to,BIO *from); 1167void BIO_ssl_shutdown(BIO *ssl_bio); 1168 1169#endif 1170 1171int SSL_CTX_set_cipher_list(SSL_CTX *,const char *str); 1172SSL_CTX *SSL_CTX_new(SSL_METHOD *meth); 1173void SSL_CTX_free(SSL_CTX *); 1174long SSL_CTX_set_timeout(SSL_CTX *ctx,long t); 1175long SSL_CTX_get_timeout(SSL_CTX *ctx); 1176X509_STORE *SSL_CTX_get_cert_store(SSL_CTX *); 1177void SSL_CTX_set_cert_store(SSL_CTX *,X509_STORE *); 1178int SSL_want(SSL *s); 1179int SSL_clear(SSL *s); 1180 1181void SSL_CTX_flush_sessions(SSL_CTX *ctx,long tm); 1182 1183SSL_CIPHER *SSL_get_current_cipher(SSL *s); 1184int SSL_CIPHER_get_bits(SSL_CIPHER *c,int *alg_bits); 1185char * SSL_CIPHER_get_version(SSL_CIPHER *c); 1186const char * SSL_CIPHER_get_name(SSL_CIPHER *c); 1187 1188int SSL_get_fd(SSL *s); 1189int SSL_get_rfd(SSL *s); 1190int SSL_get_wfd(SSL *s); 1191const char * SSL_get_cipher_list(SSL *s,int n); 1192char * SSL_get_shared_ciphers(SSL *s, char *buf, int len); 1193int SSL_get_read_ahead(SSL * s); 1194int SSL_pending(SSL *s); 1195#ifndef OPENSSL_NO_SOCK 1196int SSL_set_fd(SSL *s, int fd); 1197int SSL_set_rfd(SSL *s, int fd); 1198int SSL_set_wfd(SSL *s, int fd); 1199#endif 1200#ifndef OPENSSL_NO_BIO 1201void SSL_set_bio(SSL *s, BIO *rbio,BIO *wbio); 1202BIO * SSL_get_rbio(SSL *s); 1203BIO * SSL_get_wbio(SSL *s); 1204#endif 1205int SSL_set_cipher_list(SSL *s, const char *str); 1206void SSL_set_read_ahead(SSL *s, int yes); 1207int SSL_get_verify_mode(SSL *s); 1208int SSL_get_verify_depth(SSL *s); 1209int (*SSL_get_verify_callback(SSL *s))(int,X509_STORE_CTX *); 1210void SSL_set_verify(SSL *s, int mode, 1211 int (*callback)(int ok,X509_STORE_CTX *ctx)); 1212void SSL_set_verify_depth(SSL *s, int depth); 1213#ifndef OPENSSL_NO_RSA 1214int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa); 1215#endif 1216int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, unsigned char *d, long len); 1217int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey); 1218int SSL_use_PrivateKey_ASN1(int pk,SSL *ssl, unsigned char *d, long len); 1219int SSL_use_certificate(SSL *ssl, X509 *x); 1220int SSL_use_certificate_ASN1(SSL *ssl, unsigned char *d, int len); 1221 1222#ifndef OPENSSL_NO_STDIO 1223int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type); 1224int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type); 1225int SSL_use_certificate_file(SSL *ssl, const char *file, int type); 1226int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type); 1227int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type); 1228int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type); 1229int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* PEM type */ 1230STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file); 1231int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, 1232 const char *file); 1233#ifndef OPENSSL_SYS_VMS 1234#ifndef OPENSSL_SYS_MACINTOSH_CLASSIC /* XXXXX: Better scheme needed! [was: #ifndef MAC_OS_pre_X] */ 1235int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, 1236 const char *dir); 1237#endif 1238#endif 1239 1240#endif 1241 1242void SSL_load_error_strings(void ); 1243const char *SSL_state_string(const SSL *s); 1244const char *SSL_rstate_string(const SSL *s); 1245const char *SSL_state_string_long(const SSL *s); 1246const char *SSL_rstate_string_long(const SSL *s); 1247long SSL_SESSION_get_time(SSL_SESSION *s); 1248long SSL_SESSION_set_time(SSL_SESSION *s, long t); 1249long SSL_SESSION_get_timeout(SSL_SESSION *s); 1250long SSL_SESSION_set_timeout(SSL_SESSION *s, long t); 1251void SSL_copy_session_id(SSL *to,SSL *from); 1252 1253SSL_SESSION *SSL_SESSION_new(void); 1254unsigned long SSL_SESSION_hash(SSL_SESSION *a); 1255int SSL_SESSION_cmp(SSL_SESSION *a,SSL_SESSION *b); 1256#ifndef OPENSSL_NO_FP_API 1257int SSL_SESSION_print_fp(FILE *fp,SSL_SESSION *ses); 1258#endif 1259#ifndef OPENSSL_NO_BIO 1260int SSL_SESSION_print(BIO *fp,SSL_SESSION *ses); 1261#endif 1262void SSL_SESSION_free(SSL_SESSION *ses); 1263int i2d_SSL_SESSION(SSL_SESSION *in,unsigned char **pp); 1264int SSL_set_session(SSL *to, SSL_SESSION *session); 1265int SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c); 1266int SSL_CTX_remove_session(SSL_CTX *,SSL_SESSION *c); 1267int SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB); 1268int SSL_set_generate_session_id(SSL *, GEN_SESSION_CB); 1269int SSL_has_matching_session_id(const SSL *ssl, const unsigned char *id, 1270 unsigned int id_len); 1271SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a,unsigned char **pp,long length); 1272 1273#ifdef HEADER_X509_H 1274X509 * SSL_get_peer_certificate(SSL *s); 1275#endif 1276 1277STACK_OF(X509) *SSL_get_peer_cert_chain(SSL *s); 1278 1279int SSL_CTX_get_verify_mode(SSL_CTX *ctx); 1280int SSL_CTX_get_verify_depth(SSL_CTX *ctx); 1281int (*SSL_CTX_get_verify_callback(SSL_CTX *ctx))(int,X509_STORE_CTX *); 1282void SSL_CTX_set_verify(SSL_CTX *ctx,int mode, 1283 int (*callback)(int, X509_STORE_CTX *)); 1284void SSL_CTX_set_verify_depth(SSL_CTX *ctx,int depth); 1285void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb)(X509_STORE_CTX *,void *), void *arg); 1286#ifndef OPENSSL_NO_RSA 1287int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa); 1288#endif 1289int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, unsigned char *d, long len); 1290int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey); 1291int SSL_CTX_use_PrivateKey_ASN1(int pk,SSL_CTX *ctx, 1292 unsigned char *d, long len); 1293int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x); 1294int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, unsigned char *d); 1295 1296void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb); 1297void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *u); 1298 1299int SSL_CTX_check_private_key(SSL_CTX *ctx); 1300int SSL_check_private_key(SSL *ctx); 1301 1302int SSL_CTX_set_session_id_context(SSL_CTX *ctx,const unsigned char *sid_ctx, 1303 unsigned int sid_ctx_len); 1304 1305SSL * SSL_new(SSL_CTX *ctx); 1306int SSL_set_session_id_context(SSL *ssl,const unsigned char *sid_ctx, 1307 unsigned int sid_ctx_len); 1308 1309int SSL_CTX_set_purpose(SSL_CTX *s, int purpose); 1310int SSL_set_purpose(SSL *s, int purpose); 1311int SSL_CTX_set_trust(SSL_CTX *s, int trust); 1312int SSL_set_trust(SSL *s, int trust); 1313 1314void SSL_free(SSL *ssl); 1315int SSL_accept(SSL *ssl); 1316int SSL_connect(SSL *ssl); 1317int SSL_read(SSL *ssl,void *buf,int num); 1318int SSL_peek(SSL *ssl,void *buf,int num); 1319int SSL_write(SSL *ssl,const void *buf,int num); 1320long SSL_ctrl(SSL *ssl,int cmd, long larg, void *parg); 1321long SSL_callback_ctrl(SSL *, int, void (*)()); 1322long SSL_CTX_ctrl(SSL_CTX *ctx,int cmd, long larg, void *parg); 1323long SSL_CTX_callback_ctrl(SSL_CTX *, int, void (*)()); 1324 1325int SSL_get_error(SSL *s,int ret_code); 1326const char *SSL_get_version(SSL *s); 1327 1328/* This sets the 'default' SSL version that SSL_new() will create */ 1329int SSL_CTX_set_ssl_version(SSL_CTX *ctx,SSL_METHOD *meth); 1330 1331SSL_METHOD *SSLv2_method(void); /* SSLv2 */ 1332SSL_METHOD *SSLv2_server_method(void); /* SSLv2 */ 1333SSL_METHOD *SSLv2_client_method(void); /* SSLv2 */ 1334 1335SSL_METHOD *SSLv3_method(void); /* SSLv3 */ 1336SSL_METHOD *SSLv3_server_method(void); /* SSLv3 */ 1337SSL_METHOD *SSLv3_client_method(void); /* SSLv3 */ 1338 1339SSL_METHOD *SSLv23_method(void); /* SSLv3 but can rollback to v2 */ 1340SSL_METHOD *SSLv23_server_method(void); /* SSLv3 but can rollback to v2 */ 1341SSL_METHOD *SSLv23_client_method(void); /* SSLv3 but can rollback to v2 */ 1342 1343SSL_METHOD *TLSv1_method(void); /* TLSv1.0 */ 1344SSL_METHOD *TLSv1_server_method(void); /* TLSv1.0 */ 1345SSL_METHOD *TLSv1_client_method(void); /* TLSv1.0 */ 1346 1347STACK_OF(SSL_CIPHER) *SSL_get_ciphers(SSL *s); 1348 1349int SSL_do_handshake(SSL *s); 1350int SSL_renegotiate(SSL *s); 1351int SSL_renegotiate_pending(SSL *s); 1352int SSL_shutdown(SSL *s); 1353 1354SSL_METHOD *SSL_get_ssl_method(SSL *s); 1355int SSL_set_ssl_method(SSL *s,SSL_METHOD *method); 1356const char *SSL_alert_type_string_long(int value); 1357const char *SSL_alert_type_string(int value); 1358const char *SSL_alert_desc_string_long(int value); 1359const char *SSL_alert_desc_string(int value); 1360 1361void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *name_list); 1362void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list); 1363STACK_OF(X509_NAME) *SSL_get_client_CA_list(SSL *s); 1364STACK_OF(X509_NAME) *SSL_CTX_get_client_CA_list(SSL_CTX *s); 1365int SSL_add_client_CA(SSL *ssl,X509 *x); 1366int SSL_CTX_add_client_CA(SSL_CTX *ctx,X509 *x); 1367 1368void SSL_set_connect_state(SSL *s); 1369void SSL_set_accept_state(SSL *s); 1370 1371long SSL_get_default_timeout(SSL *s); 1372 1373int SSL_library_init(void ); 1374 1375char *SSL_CIPHER_description(SSL_CIPHER *,char *buf,int size); 1376STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *sk); 1377 1378SSL *SSL_dup(SSL *ssl); 1379 1380X509 *SSL_get_certificate(SSL *ssl); 1381/* EVP_PKEY */ struct evp_pkey_st *SSL_get_privatekey(SSL *ssl); 1382 1383void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx,int mode); 1384int SSL_CTX_get_quiet_shutdown(SSL_CTX *ctx); 1385void SSL_set_quiet_shutdown(SSL *ssl,int mode); 1386int SSL_get_quiet_shutdown(SSL *ssl); 1387void SSL_set_shutdown(SSL *ssl,int mode); 1388int SSL_get_shutdown(SSL *ssl); 1389int SSL_version(SSL *ssl); 1390int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx); 1391int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *CAfile, 1392 const char *CApath); 1393#define SSL_get0_session SSL_get_session /* just peek at pointer */ 1394SSL_SESSION *SSL_get_session(SSL *ssl); 1395SSL_SESSION *SSL_get1_session(SSL *ssl); /* obtain a reference count */ 1396SSL_CTX *SSL_get_SSL_CTX(SSL *ssl); 1397void SSL_set_info_callback(SSL *ssl, 1398 void (*cb)(const SSL *ssl,int type,int val)); 1399void (*SSL_get_info_callback(SSL *ssl))(const SSL *ssl,int type,int val); 1400int SSL_state(SSL *ssl); 1401 1402void SSL_set_verify_result(SSL *ssl,long v); 1403long SSL_get_verify_result(SSL *ssl); 1404 1405int SSL_set_ex_data(SSL *ssl,int idx,void *data); 1406void *SSL_get_ex_data(SSL *ssl,int idx); 1407int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, 1408 CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); 1409 1410int SSL_SESSION_set_ex_data(SSL_SESSION *ss,int idx,void *data); 1411void *SSL_SESSION_get_ex_data(SSL_SESSION *ss,int idx); 1412int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, 1413 CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); 1414 1415int SSL_CTX_set_ex_data(SSL_CTX *ssl,int idx,void *data); 1416void *SSL_CTX_get_ex_data(SSL_CTX *ssl,int idx); 1417int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, 1418 CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); 1419 1420int SSL_get_ex_data_X509_STORE_CTX_idx(void ); 1421 1422#define SSL_CTX_sess_set_cache_size(ctx,t) \ 1423 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_SIZE,t,NULL) 1424#define SSL_CTX_sess_get_cache_size(ctx) \ 1425 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_SIZE,0,NULL) 1426#define SSL_CTX_set_session_cache_mode(ctx,m) \ 1427 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_MODE,m,NULL) 1428#define SSL_CTX_get_session_cache_mode(ctx) \ 1429 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_MODE,0,NULL) 1430 1431#define SSL_CTX_get_default_read_ahead(ctx) SSL_CTX_get_read_ahead(ctx) 1432#define SSL_CTX_set_default_read_ahead(ctx,m) SSL_CTX_set_read_ahead(ctx,m) 1433#define SSL_CTX_get_read_ahead(ctx) \ 1434 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_READ_AHEAD,0,NULL) 1435#define SSL_CTX_set_read_ahead(ctx,m) \ 1436 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,m,NULL) 1437#define SSL_CTX_get_max_cert_list(ctx) \ 1438 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) 1439#define SSL_CTX_set_max_cert_list(ctx,m) \ 1440 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) 1441#define SSL_get_max_cert_list(ssl) \ 1442 SSL_ctrl(ssl,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) 1443#define SSL_set_max_cert_list(ssl,m) \ 1444 SSL_ctrl(ssl,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) 1445 1446 /* NB: the keylength is only applicable when is_export is true */ 1447#ifndef OPENSSL_NO_RSA 1448void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx, 1449 RSA *(*cb)(SSL *ssl,int is_export, 1450 int keylength)); 1451 1452void SSL_set_tmp_rsa_callback(SSL *ssl, 1453 RSA *(*cb)(SSL *ssl,int is_export, 1454 int keylength)); 1455#endif 1456#ifndef OPENSSL_NO_DH 1457void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx, 1458 DH *(*dh)(SSL *ssl,int is_export, 1459 int keylength)); 1460void SSL_set_tmp_dh_callback(SSL *ssl, 1461 DH *(*dh)(SSL *ssl,int is_export, 1462 int keylength)); 1463#endif 1464 1465#ifndef OPENSSL_NO_COMP 1466int SSL_COMP_add_compression_method(int id,COMP_METHOD *cm); 1467#else 1468int SSL_COMP_add_compression_method(int id,char *cm); 1469#endif 1470 1471/* BEGIN ERROR CODES */ 1472/* The following lines are auto generated by the script mkerr.pl. Any changes 1473 * made after this point may be overwritten when the script is next run. 1474 */ 1475void ERR_load_SSL_strings(void); 1476 1477/* Error codes for the SSL functions. */ 1478 1479/* Function codes. */ 1480#define SSL_F_CLIENT_CERTIFICATE 100 1481#define SSL_F_CLIENT_FINISHED 238 1482#define SSL_F_CLIENT_HELLO 101 1483#define SSL_F_CLIENT_MASTER_KEY 102 1484#define SSL_F_D2I_SSL_SESSION 103 1485#define SSL_F_DO_SSL3_WRITE 104 1486#define SSL_F_GET_CLIENT_FINISHED 105 1487#define SSL_F_GET_CLIENT_HELLO 106 1488#define SSL_F_GET_CLIENT_MASTER_KEY 107 1489#define SSL_F_GET_SERVER_FINISHED 108 1490#define SSL_F_GET_SERVER_HELLO 109 1491#define SSL_F_GET_SERVER_VERIFY 110 1492#define SSL_F_I2D_SSL_SESSION 111 1493#define SSL_F_READ_N 112 1494#define SSL_F_REQUEST_CERTIFICATE 113 1495#define SSL_F_SERVER_FINISH 239 1496#define SSL_F_SERVER_HELLO 114 1497#define SSL_F_SERVER_VERIFY 240 1498#define SSL_F_SSL23_ACCEPT 115 1499#define SSL_F_SSL23_CLIENT_HELLO 116 1500#define SSL_F_SSL23_CONNECT 117 1501#define SSL_F_SSL23_GET_CLIENT_HELLO 118 1502#define SSL_F_SSL23_GET_SERVER_HELLO 119 1503#define SSL_F_SSL23_PEEK 237 1504#define SSL_F_SSL23_READ 120 1505#define SSL_F_SSL23_WRITE 121 1506#define SSL_F_SSL2_ACCEPT 122 1507#define SSL_F_SSL2_CONNECT 123 1508#define SSL_F_SSL2_ENC_INIT 124 1509#define SSL_F_SSL2_GENERATE_KEY_MATERIAL 241 1510#define SSL_F_SSL2_PEEK 234 1511#define SSL_F_SSL2_READ 125 1512#define SSL_F_SSL2_READ_INTERNAL 236 1513#define SSL_F_SSL2_SET_CERTIFICATE 126 1514#define SSL_F_SSL2_WRITE 127 1515#define SSL_F_SSL3_ACCEPT 128 1516#define SSL_F_SSL3_CALLBACK_CTRL 233 1517#define SSL_F_SSL3_CHANGE_CIPHER_STATE 129 1518#define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM 130 1519#define SSL_F_SSL3_CLIENT_HELLO 131 1520#define SSL_F_SSL3_CONNECT 132 1521#define SSL_F_SSL3_CTRL 213 1522#define SSL_F_SSL3_CTX_CTRL 133 1523#define SSL_F_SSL3_ENC 134 1524#define SSL_F_SSL3_GENERATE_KEY_BLOCK 238 1525#define SSL_F_SSL3_GET_CERTIFICATE_REQUEST 135 1526#define SSL_F_SSL3_GET_CERT_VERIFY 136 1527#define SSL_F_SSL3_GET_CLIENT_CERTIFICATE 137 1528#define SSL_F_SSL3_GET_CLIENT_HELLO 138 1529#define SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE 139 1530#define SSL_F_SSL3_GET_FINISHED 140 1531#define SSL_F_SSL3_GET_KEY_EXCHANGE 141 1532#define SSL_F_SSL3_GET_MESSAGE 142 1533#define SSL_F_SSL3_GET_RECORD 143 1534#define SSL_F_SSL3_GET_SERVER_CERTIFICATE 144 1535#define SSL_F_SSL3_GET_SERVER_DONE 145 1536#define SSL_F_SSL3_GET_SERVER_HELLO 146 1537#define SSL_F_SSL3_OUTPUT_CERT_CHAIN 147 1538#define SSL_F_SSL3_PEEK 235 1539#define SSL_F_SSL3_READ_BYTES 148 1540#define SSL_F_SSL3_READ_N 149 1541#define SSL_F_SSL3_SEND_CERTIFICATE_REQUEST 150 1542#define SSL_F_SSL3_SEND_CLIENT_CERTIFICATE 151 1543#define SSL_F_SSL3_SEND_CLIENT_KEY_EXCHANGE 152 1544#define SSL_F_SSL3_SEND_CLIENT_VERIFY 153 1545#define SSL_F_SSL3_SEND_SERVER_CERTIFICATE 154 1546#define SSL_F_SSL3_SEND_SERVER_HELLO 242 1547#define SSL_F_SSL3_SEND_SERVER_KEY_EXCHANGE 155 1548#define SSL_F_SSL3_SETUP_BUFFERS 156 1549#define SSL_F_SSL3_SETUP_KEY_BLOCK 157 1550#define SSL_F_SSL3_WRITE_BYTES 158 1551#define SSL_F_SSL3_WRITE_PENDING 159 1552#define SSL_F_SSL_ADD_DIR_CERT_SUBJECTS_TO_STACK 215 1553#define SSL_F_SSL_ADD_FILE_CERT_SUBJECTS_TO_STACK 216 1554#define SSL_F_SSL_BAD_METHOD 160 1555#define SSL_F_SSL_BYTES_TO_CIPHER_LIST 161 1556#define SSL_F_SSL_CERT_DUP 221 1557#define SSL_F_SSL_CERT_INST 222 1558#define SSL_F_SSL_CERT_INSTANTIATE 214 1559#define SSL_F_SSL_CERT_NEW 162 1560#define SSL_F_SSL_CHECK_PRIVATE_KEY 163 1561#define SSL_F_SSL_CIPHER_PROCESS_RULESTR 230 1562#define SSL_F_SSL_CIPHER_STRENGTH_SORT 231 1563#define SSL_F_SSL_CLEAR 164 1564#define SSL_F_SSL_COMP_ADD_COMPRESSION_METHOD 165 1565#define SSL_F_SSL_CREATE_CIPHER_LIST 166 1566#define SSL_F_SSL_CTRL 232 1567#define SSL_F_SSL_CTX_CHECK_PRIVATE_KEY 168 1568#define SSL_F_SSL_CTX_NEW 169 1569#define SSL_F_SSL_CTX_SET_PURPOSE 226 1570#define SSL_F_SSL_CTX_SET_SESSION_ID_CONTEXT 219 1571#define SSL_F_SSL_CTX_SET_SSL_VERSION 170 1572#define SSL_F_SSL_CTX_SET_TRUST 229 1573#define SSL_F_SSL_CTX_USE_CERTIFICATE 171 1574#define SSL_F_SSL_CTX_USE_CERTIFICATE_ASN1 172 1575#define SSL_F_SSL_CTX_USE_CERTIFICATE_CHAIN_FILE 220 1576#define SSL_F_SSL_CTX_USE_CERTIFICATE_FILE 173 1577#define SSL_F_SSL_CTX_USE_PRIVATEKEY 174 1578#define SSL_F_SSL_CTX_USE_PRIVATEKEY_ASN1 175 1579#define SSL_F_SSL_CTX_USE_PRIVATEKEY_FILE 176 1580#define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY 177 1581#define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_ASN1 178 1582#define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_FILE 179 1583#define SSL_F_SSL_DO_HANDSHAKE 180 1584#define SSL_F_SSL_GET_NEW_SESSION 181 1585#define SSL_F_SSL_GET_PREV_SESSION 217 1586#define SSL_F_SSL_GET_SERVER_SEND_CERT 182 1587#define SSL_F_SSL_GET_SIGN_PKEY 183 1588#define SSL_F_SSL_INIT_WBIO_BUFFER 184 1589#define SSL_F_SSL_LOAD_CLIENT_CA_FILE 185 1590#define SSL_F_SSL_NEW 186 1591#define SSL_F_SSL_READ 223 1592#define SSL_F_SSL_RSA_PRIVATE_DECRYPT 187 1593#define SSL_F_SSL_RSA_PUBLIC_ENCRYPT 188 1594#define SSL_F_SSL_SESSION_NEW 189 1595#define SSL_F_SSL_SESSION_PRINT_FP 190 1596#define SSL_F_SSL_SESS_CERT_NEW 225 1597#define SSL_F_SSL_SET_CERT 191 1598#define SSL_F_SSL_SET_FD 192 1599#define SSL_F_SSL_SET_PKEY 193 1600#define SSL_F_SSL_SET_PURPOSE 227 1601#define SSL_F_SSL_SET_RFD 194 1602#define SSL_F_SSL_SET_SESSION 195 1603#define SSL_F_SSL_SET_SESSION_ID_CONTEXT 218 1604#define SSL_F_SSL_SET_TRUST 228 1605#define SSL_F_SSL_SET_WFD 196 1606#define SSL_F_SSL_SHUTDOWN 224 1607#define SSL_F_SSL_UNDEFINED_FUNCTION 197 1608#define SSL_F_SSL_USE_CERTIFICATE 198 1609#define SSL_F_SSL_USE_CERTIFICATE_ASN1 199 1610#define SSL_F_SSL_USE_CERTIFICATE_FILE 200 1611#define SSL_F_SSL_USE_PRIVATEKEY 201 1612#define SSL_F_SSL_USE_PRIVATEKEY_ASN1 202 1613#define SSL_F_SSL_USE_PRIVATEKEY_FILE 203 1614#define SSL_F_SSL_USE_RSAPRIVATEKEY 204 1615#define SSL_F_SSL_USE_RSAPRIVATEKEY_ASN1 205 1616#define SSL_F_SSL_USE_RSAPRIVATEKEY_FILE 206 1617#define SSL_F_SSL_VERIFY_CERT_CHAIN 207 1618#define SSL_F_SSL_WRITE 208 1619#define SSL_F_TLS1_CHANGE_CIPHER_STATE 209 1620#define SSL_F_TLS1_ENC 210 1621#define SSL_F_TLS1_SETUP_KEY_BLOCK 211 1622#define SSL_F_WRITE_PENDING 212 1623 1624/* Reason codes. */ 1625#define SSL_R_APP_DATA_IN_HANDSHAKE 100 1626#define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 272 1627#define SSL_R_BAD_ALERT_RECORD 101 1628#define SSL_R_BAD_AUTHENTICATION_TYPE 102 1629#define SSL_R_BAD_CHANGE_CIPHER_SPEC 103 1630#define SSL_R_BAD_CHECKSUM 104 1631#define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 106 1632#define SSL_R_BAD_DECOMPRESSION 107 1633#define SSL_R_BAD_DH_G_LENGTH 108 1634#define SSL_R_BAD_DH_PUB_KEY_LENGTH 109 1635#define SSL_R_BAD_DH_P_LENGTH 110 1636#define SSL_R_BAD_DIGEST_LENGTH 111 1637#define SSL_R_BAD_DSA_SIGNATURE 112 1638#define SSL_R_BAD_HELLO_REQUEST 105 1639#define SSL_R_BAD_LENGTH 271 1640#define SSL_R_BAD_MAC_DECODE 113 1641#define SSL_R_BAD_MESSAGE_TYPE 114 1642#define SSL_R_BAD_PACKET_LENGTH 115 1643#define SSL_R_BAD_PROTOCOL_VERSION_NUMBER 116 1644#define SSL_R_BAD_RESPONSE_ARGUMENT 117 1645#define SSL_R_BAD_RSA_DECRYPT 118 1646#define SSL_R_BAD_RSA_ENCRYPT 119 1647#define SSL_R_BAD_RSA_E_LENGTH 120 1648#define SSL_R_BAD_RSA_MODULUS_LENGTH 121 1649#define SSL_R_BAD_RSA_SIGNATURE 122 1650#define SSL_R_BAD_SIGNATURE 123 1651#define SSL_R_BAD_SSL_FILETYPE 124 1652#define SSL_R_BAD_SSL_SESSION_ID_LENGTH 125 1653#define SSL_R_BAD_STATE 126 1654#define SSL_R_BAD_WRITE_RETRY 127 1655#define SSL_R_BIO_NOT_SET 128 1656#define SSL_R_BLOCK_CIPHER_PAD_IS_WRONG 129 1657#define SSL_R_BN_LIB 130 1658#define SSL_R_CA_DN_LENGTH_MISMATCH 131 1659#define SSL_R_CA_DN_TOO_LONG 132 1660#define SSL_R_CCS_RECEIVED_EARLY 133 1661#define SSL_R_CERTIFICATE_VERIFY_FAILED 134 1662#define SSL_R_CERT_LENGTH_MISMATCH 135 1663#define SSL_R_CHALLENGE_IS_DIFFERENT 136 1664#define SSL_R_CIPHER_CODE_WRONG_LENGTH 137 1665#define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 138 1666#define SSL_R_CIPHER_TABLE_SRC_ERROR 139 1667#define SSL_R_COMPRESSED_LENGTH_TOO_LONG 140 1668#define SSL_R_COMPRESSION_FAILURE 141 1669#define SSL_R_COMPRESSION_LIBRARY_ERROR 142 1670#define SSL_R_CONNECTION_ID_IS_DIFFERENT 143 1671#define SSL_R_CONNECTION_TYPE_NOT_SET 144 1672#define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 145 1673#define SSL_R_DATA_LENGTH_TOO_LONG 146 1674#define SSL_R_DECRYPTION_FAILED 147 1675#define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 1109 1676#define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 148 1677#define SSL_R_DIGEST_CHECK_FAILED 149 1678#define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 150 1679#define SSL_R_ERROR_GENERATING_TMP_RSA_KEY 1092 1680#define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 151 1681#define SSL_R_EXCESSIVE_MESSAGE_SIZE 152 1682#define SSL_R_EXTRA_DATA_IN_MESSAGE 153 1683#define SSL_R_GOT_A_FIN_BEFORE_A_CCS 154 1684#define SSL_R_HTTPS_PROXY_REQUEST 155 1685#define SSL_R_HTTP_REQUEST 156 1686#define SSL_R_ILLEGAL_PADDING 1110 1687#define SSL_R_INVALID_CHALLENGE_LENGTH 158 1688#define SSL_R_INVALID_COMMAND 280 1689#define SSL_R_INVALID_PURPOSE 278 1690#define SSL_R_INVALID_TRUST 279 1691#define SSL_R_KEY_ARG_TOO_LONG 1112 1692#define SSL_R_KRB5 1104 1693#define SSL_R_KRB5_C_CC_PRINC 1094 1694#define SSL_R_KRB5_C_GET_CRED 1095 1695#define SSL_R_KRB5_C_INIT 1096 1696#define SSL_R_KRB5_C_MK_REQ 1097 1697#define SSL_R_KRB5_S_BAD_TICKET 1098 1698#define SSL_R_KRB5_S_INIT 1099 1699#define SSL_R_KRB5_S_RD_REQ 1108 1700#define SSL_R_KRB5_S_TKT_EXPIRED 1105 1701#define SSL_R_KRB5_S_TKT_NYV 1106 1702#define SSL_R_KRB5_S_TKT_SKEW 1107 1703#define SSL_R_LENGTH_MISMATCH 159 1704#define SSL_R_LENGTH_TOO_SHORT 160 1705#define SSL_R_LIBRARY_BUG 274 1706#define SSL_R_LIBRARY_HAS_NO_CIPHERS 161 1707#define SSL_R_MASTER_KEY_TOO_LONG 1112 1708#define SSL_R_MESSAGE_TOO_LONG 1111 1709#define SSL_R_MISSING_DH_DSA_CERT 162 1710#define SSL_R_MISSING_DH_KEY 163 1711#define SSL_R_MISSING_DH_RSA_CERT 164 1712#define SSL_R_MISSING_DSA_SIGNING_CERT 165 1713#define SSL_R_MISSING_EXPORT_TMP_DH_KEY 166 1714#define SSL_R_MISSING_EXPORT_TMP_RSA_KEY 167 1715#define SSL_R_MISSING_RSA_CERTIFICATE 168 1716#define SSL_R_MISSING_RSA_ENCRYPTING_CERT 169 1717#define SSL_R_MISSING_RSA_SIGNING_CERT 170 1718#define SSL_R_MISSING_TMP_DH_KEY 171 1719#define SSL_R_MISSING_TMP_RSA_KEY 172 1720#define SSL_R_MISSING_TMP_RSA_PKEY 173 1721#define SSL_R_MISSING_VERIFY_MESSAGE 174 1722#define SSL_R_NON_SSLV2_INITIAL_PACKET 175 1723#define SSL_R_NO_CERTIFICATES_RETURNED 176 1724#define SSL_R_NO_CERTIFICATE_ASSIGNED 177 1725#define SSL_R_NO_CERTIFICATE_RETURNED 178 1726#define SSL_R_NO_CERTIFICATE_SET 179 1727#define SSL_R_NO_CERTIFICATE_SPECIFIED 180 1728#define SSL_R_NO_CIPHERS_AVAILABLE 181 1729#define SSL_R_NO_CIPHERS_PASSED 182 1730#define SSL_R_NO_CIPHERS_SPECIFIED 183 1731#define SSL_R_NO_CIPHER_LIST 184 1732#define SSL_R_NO_CIPHER_MATCH 185 1733#define SSL_R_NO_CLIENT_CERT_RECEIVED 186 1734#define SSL_R_NO_COMPRESSION_SPECIFIED 187 1735#define SSL_R_NO_METHOD_SPECIFIED 188 1736#define SSL_R_NO_PRIVATEKEY 189 1737#define SSL_R_NO_PRIVATE_KEY_ASSIGNED 190 1738#define SSL_R_NO_PROTOCOLS_AVAILABLE 191 1739#define SSL_R_NO_PUBLICKEY 192 1740#define SSL_R_NO_SHARED_CIPHER 193 1741#define SSL_R_NO_VERIFY_CALLBACK 194 1742#define SSL_R_NULL_SSL_CTX 195 1743#define SSL_R_NULL_SSL_METHOD_PASSED 196 1744#define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 197 1745#define SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE 1115 1746#define SSL_R_PACKET_LENGTH_TOO_LONG 198 1747#define SSL_R_PATH_TOO_LONG 270 1748#define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 199 1749#define SSL_R_PEER_ERROR 200 1750#define SSL_R_PEER_ERROR_CERTIFICATE 201 1751#define SSL_R_PEER_ERROR_NO_CERTIFICATE 202 1752#define SSL_R_PEER_ERROR_NO_CIPHER 203 1753#define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 204 1754#define SSL_R_PRE_MAC_LENGTH_TOO_LONG 205 1755#define SSL_R_PROBLEMS_MAPPING_CIPHER_FUNCTIONS 206 1756#define SSL_R_PROTOCOL_IS_SHUTDOWN 207 1757#define SSL_R_PUBLIC_KEY_ENCRYPT_ERROR 208 1758#define SSL_R_PUBLIC_KEY_IS_NOT_RSA 209 1759#define SSL_R_PUBLIC_KEY_NOT_RSA 210 1760#define SSL_R_READ_BIO_NOT_SET 211 1761#define SSL_R_READ_WRONG_PACKET_TYPE 212 1762#define SSL_R_RECORD_LENGTH_MISMATCH 213 1763#define SSL_R_RECORD_TOO_LARGE 214 1764#define SSL_R_RECORD_TOO_SMALL 1093 1765#define SSL_R_REQUIRED_CIPHER_MISSING 215 1766#define SSL_R_REUSE_CERT_LENGTH_NOT_ZERO 216 1767#define SSL_R_REUSE_CERT_TYPE_NOT_ZERO 217 1768#define SSL_R_REUSE_CIPHER_LIST_NOT_ZERO 218 1769#define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 277 1770#define SSL_R_SHORT_READ 219 1771#define SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE 220 1772#define SSL_R_SSL23_DOING_SESSION_ID_REUSE 221 1773#define SSL_R_SSL2_CONNECTION_ID_TOO_LONG 1114 1774#define SSL_R_SSL3_SESSION_ID_TOO_LONG 1113 1775#define SSL_R_SSL3_SESSION_ID_TOO_SHORT 222 1776#define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042 1777#define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020 1778#define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045 1779#define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044 1780#define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046 1781#define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030 1782#define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040 1783#define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047 1784#define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041 1785#define SSL_R_SSLV3_ALERT_PEER_ERROR_CERTIFICATE 223 1786#define SSL_R_SSLV3_ALERT_PEER_ERROR_NO_CERTIFICATE 224 1787#define SSL_R_SSLV3_ALERT_PEER_ERROR_NO_CIPHER 225 1788#define SSL_R_SSLV3_ALERT_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 226 1789#define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010 1790#define SSL_R_SSLV3_ALERT_UNKNOWN_REMOTE_ERROR_TYPE 227 1791#define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043 1792#define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 228 1793#define SSL_R_SSL_HANDSHAKE_FAILURE 229 1794#define SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS 230 1795#define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 1102 1796#define SSL_R_SSL_SESSION_ID_CONFLICT 1103 1797#define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 273 1798#define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 1101 1799#define SSL_R_SSL_SESSION_ID_IS_DIFFERENT 231 1800#define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049 1801#define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050 1802#define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021 1803#define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051 1804#define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060 1805#define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071 1806#define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080 1807#define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100 1808#define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070 1809#define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022 1810#define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048 1811#define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090 1812#define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER 232 1813#define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 233 1814#define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 234 1815#define SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER 235 1816#define SSL_R_UNABLE_TO_DECODE_DH_CERTS 236 1817#define SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY 237 1818#define SSL_R_UNABLE_TO_FIND_DH_PARAMETERS 238 1819#define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 239 1820#define SSL_R_UNABLE_TO_FIND_SSL_METHOD 240 1821#define SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES 241 1822#define SSL_R_UNABLE_TO_LOAD_SSL3_MD5_ROUTINES 242 1823#define SSL_R_UNABLE_TO_LOAD_SSL3_SHA1_ROUTINES 243 1824#define SSL_R_UNEXPECTED_MESSAGE 244 1825#define SSL_R_UNEXPECTED_RECORD 245 1826#define SSL_R_UNINITIALIZED 276 1827#define SSL_R_UNKNOWN_ALERT_TYPE 246 1828#define SSL_R_UNKNOWN_CERTIFICATE_TYPE 247 1829#define SSL_R_UNKNOWN_CIPHER_RETURNED 248 1830#define SSL_R_UNKNOWN_CIPHER_TYPE 249 1831#define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 250 1832#define SSL_R_UNKNOWN_PKEY_TYPE 251 1833#define SSL_R_UNKNOWN_PROTOCOL 252 1834#define SSL_R_UNKNOWN_REMOTE_ERROR_TYPE 253 1835#define SSL_R_UNKNOWN_SSL_VERSION 254 1836#define SSL_R_UNKNOWN_STATE 255 1837#define SSL_R_UNSUPPORTED_CIPHER 256 1838#define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 257 1839#define SSL_R_UNSUPPORTED_OPTION 1091 1840#define SSL_R_UNSUPPORTED_PROTOCOL 258 1841#define SSL_R_UNSUPPORTED_SSL_VERSION 259 1842#define SSL_R_WRITE_BIO_NOT_SET 260 1843#define SSL_R_WRONG_CIPHER_RETURNED 261 1844#define SSL_R_WRONG_MESSAGE_TYPE 262 1845#define SSL_R_WRONG_NUMBER_OF_KEY_BITS 263 1846#define SSL_R_WRONG_SIGNATURE_LENGTH 264 1847#define SSL_R_WRONG_SIGNATURE_SIZE 265 1848#define SSL_R_WRONG_SSL_VERSION 266 1849#define SSL_R_WRONG_VERSION_NUMBER 267 1850#define SSL_R_X509_LIB 268 1851#define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 269 1852 1853#ifdef __cplusplus 1854} 1855#endif 1856#endif 1857