1# Makefile.in generated by automake 1.9.6 from Makefile.am.
2# include/Makefile.  Generated from Makefile.in by configure.
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005  Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15include ../../config.in
16include ../../config.mk
17
18DESTDIR=$(TARGETDIR)
19
20srcdir = .
21top_srcdir = ..
22
23pkgdatadir = $(datadir)/ntfs-3g
24pkglibdir = $(libdir)/ntfs-3g
25pkgincludedir = $(includedir)/ntfs-3g
26top_builddir = ..
27am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
28INSTALL = /usr/bin/install -c
29install_sh_DATA = $(install_sh) -c -m 644
30install_sh_PROGRAM = $(install_sh) -c
31install_sh_SCRIPT = $(install_sh) -c
32INSTALL_HEADER = $(INSTALL_DATA)
33transform = $(program_transform_name)
34NORMAL_INSTALL = :
35PRE_INSTALL = :
36POST_INSTALL = :
37NORMAL_UNINSTALL = :
38PRE_UNINSTALL = :
39POST_UNINSTALL = :
40ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
41build_triplet = mipsel-uclibc-linux-gnu26
42else
43build_triplet = mipsel-unknown-linux-uclibc
44endif
45host_triplet = mipsel-unknown-elf
46ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
47target_triplet = mipsel-uclibc-linux-gnu26
48else
49target_triplet = mipsel-unknown-linux-uclibc
50endif
51subdir = include
52DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
53ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
54am__aclocal_m4_deps = $(top_srcdir)/configure.ac
55am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
56	$(ACLOCAL_M4)
57mkinstalldirs = $(install_sh) -d
58CONFIG_HEADER = $(top_builddir)/config.h
59CONFIG_CLEAN_FILES =
60SOURCES =
61DIST_SOURCES =
62RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
63	html-recursive info-recursive install-data-recursive \
64	install-exec-recursive install-info-recursive \
65	install-recursive installcheck-recursive installdirs-recursive \
66	pdf-recursive ps-recursive uninstall-info-recursive \
67	uninstall-recursive
68ETAGS = etags
69CTAGS = ctags
70DIST_SUBDIRS = $(SUBDIRS)
71DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
72ACLOCAL = ${SHELL} /home/peter/projects/WNR3500L/Linux2.6/mainstream/bcm4718/ap/gpl/ntfs-3g-2009.3.8/missing --run aclocal-1.9
73AMDEP_FALSE = #
74AMDEP_TRUE = 
75AMTAR = ${SHELL} /home/peter/projects/WNR3500L/Linux2.6/mainstream/bcm4718/ap/gpl/ntfs-3g-2009.3.8/missing --run tar
76ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
77AR = mipsel-linux-uclibc-ar
78else
79AR = mipsel-uclibc-ar
80endif
81AUTOCONF = ${SHELL} /home/peter/projects/WNR3500L/Linux2.6/mainstream/bcm4718/ap/gpl/ntfs-3g-2009.3.8/missing --run autoconf
82AUTOHEADER = ${SHELL} /home/peter/projects/WNR3500L/Linux2.6/mainstream/bcm4718/ap/gpl/ntfs-3g-2009.3.8/missing --run autoheader
83AUTOMAKE = ${SHELL} /home/peter/projects/WNR3500L/Linux2.6/mainstream/bcm4718/ap/gpl/ntfs-3g-2009.3.8/missing --run automake-1.9
84AWK = gawk
85ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
86CC = mipsel-linux-uclibc-gcc
87else
88CC = mipsel-uclibc-gcc
89endif
90CCDEPMODE = depmode=gcc3
91CFLAGS = -g -O3 -Wall
92ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
93CPP = mipsel-linux-uclibc-gcc -E
94else
95CPP = mipsel-uclibc-gcc -E
96endif
97CPPFLAGS = 
98CXX = g++
99CXXCPP = g++ -E
100CXXDEPMODE = depmode=gcc3
101CXXFLAGS = -g -O2
102CYGPATH_W = echo
103DEFS = -DHAVE_CONFIG_H
104DEPDIR = .deps
105ECHO = echo
106ECHO_C = 
107ECHO_N = -n
108ECHO_T = 
109EGREP = /bin/grep -E
110ENABLE_MOUNT_HELPER_FALSE = #
111ENABLE_MOUNT_HELPER_TRUE = 
112EXEEXT = 
113F77 = gfortran
114FFLAGS = -g -O2
115FUSE_INTERNAL_FALSE = #
116FUSE_INTERNAL_TRUE = 
117FUSE_MODULE_CFLAGS = 
118FUSE_MODULE_LIBS = 
119GENERATE_LDSCRIPT_FALSE = 
120GENERATE_LDSCRIPT_TRUE = #
121GREP = /bin/grep
122INSTALL_DATA = ${INSTALL} -m 644
123INSTALL_LIBRARY_FALSE = #
124INSTALL_LIBRARY_TRUE = 
125INSTALL_PROGRAM = ${INSTALL}
126INSTALL_SCRIPT = ${INSTALL}
127INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
128LDCONFIG = /sbin/ldconfig
129LDFLAGS = 
130LIBFUSE_LITE_LIBS =  -lpthread
131LIBNTFS_3G_VERSION = 52
132LIBOBJS =  ${LIBOBJDIR}memcmp$U.o ${LIBOBJDIR}lstat$U.o ${LIBOBJDIR}stat$U.o
133LIBS = 
134LIBTOOL = $(SHELL) $(top_builddir)/libtool
135LN_S = ln -s
136LTLIBOBJS =  ${LIBOBJDIR}memcmp$U.lo ${LIBOBJDIR}lstat$U.lo ${LIBOBJDIR}stat$U.lo
137MAINT = #
138MAINTAINER_MODE_FALSE = 
139MAINTAINER_MODE_TRUE = #
140MAKEINFO = ${SHELL} /home/peter/projects/WNR3500L/Linux2.6/mainstream/bcm4718/ap/gpl/ntfs-3g-2009.3.8/missing --run makeinfo
141MKDIR_P = $(mkdir_p)
142MV = /bin/mv
143NTFS_DEVICE_DEFAULT_IO_OPS_FALSE = #
144NTFS_DEVICE_DEFAULT_IO_OPS_TRUE = 
145OBJEXT = o
146OUTPUT_FORMAT = 
147PACKAGE = ntfs-3g
148PACKAGE_BUGREPORT = ntfs-3g-devel@lists.sf.net
149PACKAGE_NAME = ntfs-3g
150PACKAGE_STRING = ntfs-3g 2009.3.8
151PACKAGE_TARNAME = ntfs-3g
152PACKAGE_VERSION = 2009.3.8
153PATH_SEPARATOR = :
154PKG_CONFIG = 
155RANLIB = ranlib
156REALLYSTATIC_FALSE = 
157REALLYSTATIC_TRUE = #
158RM = /bin/rm
159RUN_LDCONFIG_FALSE = #
160RUN_LDCONFIG_TRUE = 
161SED = /bin/sed
162SET_MAKE = 
163SHELL = /bin/sh
164ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
165STRIP = mipsel-linux-uclibc-strip
166else
167STRIP = mipsel-uclibc-strip
168endif
169VERSION = 2009.3.8
170WINDOWS_FALSE = 
171WINDOWS_TRUE = #
172ac_ct_CC = 
173ac_ct_CXX = g++
174ac_ct_F77 = gfortran
175am__fastdepCC_FALSE = #
176am__fastdepCC_TRUE = 
177am__fastdepCXX_FALSE = #
178am__fastdepCXX_TRUE = 
179am__include = include
180am__leading_dot = .
181am__quote = 
182am__tar = ${AMTAR} chof - "$$tardir"
183am__untar = ${AMTAR} xf -
184bindir = ${exec_prefix}/bin
185ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
186build = mipsel-uclibc-linux-gnu26
187build_alias = mipsel-uclibc-linux26
188else
189build = mipsel-unknown-linux-uclibc
190build_alias = mipsel-linux-uclibc
191endif
192build_cpu = mipsel
193ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
194build_os = linux-gnu26
195build_vendor = uclibc
196else
197build_os = linux-uclibc
198build_vendor = unknown
199endif
200datadir = ${datarootdir}
201datarootdir = ${prefix}/share
202docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
203dvidir = ${docdir}
204exec_prefix = ${prefix}
205host = mipsel-unknown-elf
206host_alias = mipsel
207host_cpu = mipsel
208host_os = elf
209host_vendor = unknown
210htmldir = ${docdir}
211includedir = ${prefix}/include
212infodir = ${datarootdir}/info
213install_sh = /home/peter/projects/WNR3500L/Linux2.6/mainstream/bcm4718/ap/gpl/ntfs-3g-2009.3.8/install-sh
214libdir = ${exec_prefix}/lib
215libexecdir = ${exec_prefix}/libexec
216localedir = ${datarootdir}/locale
217localstatedir = ${prefix}/var
218mandir = ${datarootdir}/man
219mkdir_p = mkdir -p --
220ntfs3gincludedir = $(includedir)/ntfs-3g
221oldincludedir = /usr/include
222pdfdir = ${docdir}
223pkgconfigdir = $(libdir)/pkgconfig
224#prefix = /usr/local
225prefix = $(TARGETDIR)/usr/sbin
226ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
227program_transform_name = s&^&mipsel-uclibc-linux26-&
228else
229program_transform_name = s&^&mipsel-linux-uclibc-&
230endif
231psdir = ${docdir}
232rootbindir = /bin
233rootlibdir = /lib
234rootsbindir = /sbin
235sbindir = ${exec_prefix}/sbin
236sharedstatedir = ${prefix}/com
237sysconfdir = ${prefix}/etc
238ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
239target = mipsel-uclibc-linux-gnu26
240target_alias = mipsel-uclibc-linux26
241else
242target = mipsel-unknown-linux-uclibc
243target_alias = mipsel-linux-uclibc
244endif
245target_cpu = mipsel
246ifeq ($(LINUXDIR), $(SRCBASE)/linux/linux-2.6)
247target_os = linux-gnu26
248target_vendor = uclibc
249else
250target_os = linux-uclibc
251target_vendor = unknown
252endif
253MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
254SUBDIRS = ntfs-3g fuse-lite
255all: all-recursive
256
257.SUFFIXES:
258$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
259	@for dep in $?; do \
260	  case '$(am__configure_deps)' in \
261	    *$$dep*) \
262	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
263		&& exit 0; \
264	      exit 1;; \
265	  esac; \
266	done; \
267	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  include/Makefile'; \
268	cd $(top_srcdir) && \
269	  $(AUTOMAKE) --gnu  include/Makefile
270.PRECIOUS: Makefile
271Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
272	@case '$?' in \
273	  *config.status*) \
274	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
275	  *) \
276	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
277	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
278	esac;
279
280$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
281	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
282
283$(top_srcdir)/configure: # $(am__configure_deps)
284	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
285$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
286	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
287
288mostlyclean-libtool:
289	-rm -f *.lo
290
291clean-libtool:
292	-rm -rf .libs _libs
293
294distclean-libtool:
295	-rm -f libtool
296uninstall-info-am:
297
298# This directory's subdirectories are mostly independent; you can cd
299# into them and run `make' without going through this Makefile.
300# To change the values of `make' variables: instead of editing Makefiles,
301# (1) if the variable is set in `config.status', edit `config.status'
302#     (which will cause the Makefiles to be regenerated when you run `make');
303# (2) otherwise, pass the desired values on the `make' command line.
304$(RECURSIVE_TARGETS):
305	@failcom='exit 1'; \
306	for f in x $$MAKEFLAGS; do \
307	  case $$f in \
308	    *=* | --[!k]*);; \
309	    *k*) failcom='fail=yes';; \
310	  esac; \
311	done; \
312	dot_seen=no; \
313	target=`echo $@ | sed s/-recursive//`; \
314	list='$(SUBDIRS)'; for subdir in $$list; do \
315	  echo "Making $$target in $$subdir"; \
316	  if test "$$subdir" = "."; then \
317	    dot_seen=yes; \
318	    local_target="$$target-am"; \
319	  else \
320	    local_target="$$target"; \
321	  fi; \
322	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
323	  || eval $$failcom; \
324	done; \
325	if test "$$dot_seen" = "no"; then \
326	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
327	fi; test -z "$$fail"
328
329mostlyclean-recursive clean-recursive distclean-recursive \
330maintainer-clean-recursive:
331	@failcom='exit 1'; \
332	for f in x $$MAKEFLAGS; do \
333	  case $$f in \
334	    *=* | --[!k]*);; \
335	    *k*) failcom='fail=yes';; \
336	  esac; \
337	done; \
338	dot_seen=no; \
339	case "$@" in \
340	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
341	  *) list='$(SUBDIRS)' ;; \
342	esac; \
343	rev=''; for subdir in $$list; do \
344	  if test "$$subdir" = "."; then :; else \
345	    rev="$$subdir $$rev"; \
346	  fi; \
347	done; \
348	rev="$$rev ."; \
349	target=`echo $@ | sed s/-recursive//`; \
350	for subdir in $$rev; do \
351	  echo "Making $$target in $$subdir"; \
352	  if test "$$subdir" = "."; then \
353	    local_target="$$target-am"; \
354	  else \
355	    local_target="$$target"; \
356	  fi; \
357	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
358	  || eval $$failcom; \
359	done && test -z "$$fail"
360tags-recursive:
361	list='$(SUBDIRS)'; for subdir in $$list; do \
362	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
363	done
364ctags-recursive:
365	list='$(SUBDIRS)'; for subdir in $$list; do \
366	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
367	done
368
369ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
370	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
371	unique=`for i in $$list; do \
372	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
373	  done | \
374	  $(AWK) '    { files[$$0] = 1; } \
375	       END { for (i in files) print i; }'`; \
376	mkid -fID $$unique
377tags: TAGS
378
379TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
380		$(TAGS_FILES) $(LISP)
381	tags=; \
382	here=`pwd`; \
383	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
384	  include_option=--etags-include; \
385	  empty_fix=.; \
386	else \
387	  include_option=--include; \
388	  empty_fix=; \
389	fi; \
390	list='$(SUBDIRS)'; for subdir in $$list; do \
391	  if test "$$subdir" = .; then :; else \
392	    test ! -f $$subdir/TAGS || \
393	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
394	  fi; \
395	done; \
396	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
397	unique=`for i in $$list; do \
398	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
399	  done | \
400	  $(AWK) '    { files[$$0] = 1; } \
401	       END { for (i in files) print i; }'`; \
402	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
403	  test -n "$$unique" || unique=$$empty_fix; \
404	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
405	    $$tags $$unique; \
406	fi
407ctags: CTAGS
408CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
409		$(TAGS_FILES) $(LISP)
410	tags=; \
411	here=`pwd`; \
412	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
413	unique=`for i in $$list; do \
414	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
415	  done | \
416	  $(AWK) '    { files[$$0] = 1; } \
417	       END { for (i in files) print i; }'`; \
418	test -z "$(CTAGS_ARGS)$$tags$$unique" \
419	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
420	     $$tags $$unique
421
422GTAGS:
423	here=`$(am__cd) $(top_builddir) && pwd` \
424	  && cd $(top_srcdir) \
425	  && gtags -i $(GTAGS_ARGS) $$here
426
427distclean-tags:
428	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
429
430distdir: $(DISTFILES)
431	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
432	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
433	list='$(DISTFILES)'; for file in $$list; do \
434	  case $$file in \
435	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
436	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
437	  esac; \
438	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
439	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
440	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
441	    dir="/$$dir"; \
442	    $(mkdir_p) "$(distdir)$$dir"; \
443	  else \
444	    dir=''; \
445	  fi; \
446	  if test -d $$d/$$file; then \
447	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
448	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
449	    fi; \
450	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
451	  else \
452	    test -f $(distdir)/$$file \
453	    || cp -p $$d/$$file $(distdir)/$$file \
454	    || exit 1; \
455	  fi; \
456	done
457	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
458	  if test "$$subdir" = .; then :; else \
459	    test -d "$(distdir)/$$subdir" \
460	    || $(mkdir_p) "$(distdir)/$$subdir" \
461	    || exit 1; \
462	    distdir=`$(am__cd) $(distdir) && pwd`; \
463	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
464	    (cd $$subdir && \
465	      $(MAKE) $(AM_MAKEFLAGS) \
466	        top_distdir="$$top_distdir" \
467	        distdir="$$distdir/$$subdir" \
468	        distdir) \
469	      || exit 1; \
470	  fi; \
471	done
472check-am: all-am
473check: check-recursive
474all-am: Makefile
475installdirs: installdirs-recursive
476installdirs-am:
477install: install-recursive
478install-exec: install-exec-recursive
479install-data: install-data-recursive
480uninstall: uninstall-recursive
481
482install-am: all-am
483	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
484
485installcheck: installcheck-recursive
486install-strip:
487	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
488	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
489	  `test -z '$(STRIP)' || \
490	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
491mostlyclean-generic:
492
493clean-generic:
494
495distclean-generic:
496	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
497
498maintainer-clean-generic:
499	@echo "This command is intended for maintainers to use"
500	@echo "it deletes files that may require special tools to rebuild."
501	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
502clean: clean-recursive
503
504clean-am: clean-generic clean-libtool mostlyclean-am
505
506distclean: distclean-recursive
507	-rm -f Makefile
508distclean-am: clean-am distclean-generic distclean-libtool \
509	distclean-tags
510
511dvi: dvi-recursive
512
513dvi-am:
514
515html: html-recursive
516
517info: info-recursive
518
519info-am:
520
521install-data-am:
522
523install-exec-am:
524
525install-info: install-info-recursive
526
527install-man:
528
529installcheck-am:
530
531maintainer-clean: maintainer-clean-recursive
532	-rm -f Makefile
533maintainer-clean-am: distclean-am maintainer-clean-generic
534
535mostlyclean: mostlyclean-recursive
536
537mostlyclean-am: mostlyclean-generic mostlyclean-libtool
538
539pdf: pdf-recursive
540
541pdf-am:
542
543ps: ps-recursive
544
545ps-am:
546
547uninstall-am: uninstall-info-am
548
549uninstall-info: uninstall-info-recursive
550
551.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
552	clean clean-generic clean-libtool clean-recursive ctags \
553	ctags-recursive distclean distclean-generic distclean-libtool \
554	distclean-recursive distclean-tags distdir dvi dvi-am html \
555	html-am info info-am install install-am install-data \
556	install-data-am install-exec install-exec-am install-info \
557	install-info-am install-man install-strip installcheck \
558	installcheck-am installdirs installdirs-am maintainer-clean \
559	maintainer-clean-generic maintainer-clean-recursive \
560	mostlyclean mostlyclean-generic mostlyclean-libtool \
561	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
562	uninstall uninstall-am uninstall-info-am
563
564# Tell versions [3.59,3.63) of GNU make to not export all variables.
565# Otherwise a system limit (for SysV at least) may be exceeded.
566.NOEXPORT:
567