_fini __uClibc_main __deregister_frame_info __register_frame_info _Jv_RegisterClasses memset strlen memcpy free stderr fprintf wl_cmd_usage cntry_names strcasecmp atoi miniopt_init miniopt strcmp wc_cmd_check wl_cmds wl_seq_batch_in_client strcpy memmove fwrite strncmp strncpy putchar strchr strtol wl_ether_atoe strspn wf_chspec_aton strcspn strstr sprintf wl_hexdump __ctype_b memcmp wl_format_ssid wf_chspec_ntoa wl_ether_etoa dump_rateset wlu_av0 fputc wl_cmds_usage strncasecmp malloc strcat wl_get wlu_get bcm_brev_str wl_printint wlu_iovar_get wlu_iovar_getint wlu_var_getbuf_med fputs stdout wlu_var_getbuf_sm wlu_var_getbuf wf_chspec_ctlchan cca_per_chan_summary cca_analyze fopen fclose bcm_crypto_algo_name wl_set wlu_set bcm_next_tlv wlu_iovar_set wlu_iovar_setint wl_varint time srand wlu_var_setbuf strtok wl_iptoa wl_atoip toupper fread ferror feof fflush ffs wl_int wl_seq_start wl_seq_stop kill signal wait ctrlc_handler def_handler fork g_child_pid getpid exit perror __errno_location fgets strsep socket wl_check stdin remote_type process_args wl_option defined_debug g_rem_ifname wl_varcmd wl_printlasterror rwl_os_type remote_vista_cmds rwl_shell_cmd_proc wlu_init g_rwl_servIP g_rwl_servport rwl_usage g_rwl_buf_mac wl_ioctl rwl_setinformation_fe rwl_queryinformation_fe bcm_ctype bcm_strtoul snprintf __ctype_tolower g_sig_ctrlc remote_CDC_rx remote_CDC_rx_hdr remote_CDC_tx rwl_swap_header rwl_shell_createproc rwl_shell_killproc bufmac_wlu usleep libgcc_s.so.1 _DYNAMIC_LINKING __RLD_MAP libc.so.0 _GLOBAL_OFFSET_TABLE_ _ftext _fdata _gp _edata __bss_start _fbss _end GLIBC_2.0
Low High Medium Incorrect version of TSPEC struct: expected %d; got %d TSPEC arg length too short: expected %d; got %d REJECTED UNKNOWN PENDING ACCEPTED TID %d %s tsinfo 0x%02x 0x%02x 0x%02x AC[%d] : Trigger enabled AC[%d] : Delivery enabled AC[%d] : Trig & Delv enabled AC [%d] : Legacy Power save fixed size nom_msdu_size %d %s max_msdu_size %d min_srv_interval %d max_srv_interval %d inactivity_interval %d suspension_interval %d srv_start_time %d min_data_rate %d mean_data_rate %d peak_data_rate %d max_burst_size %d delay_bound %d min_phy_rate %d surplus_bw %d medium_time %d %2d.%-2d %u MCS SET : [ %d bsscfg: Sorry, your driver has smfs_version %d but this program supports only version %d. Frame type: %s Ignored Count: %d Malformed Count: %d Successful/Failed Count: %s %d Count: %d %s %s %s %s -1 5.5 cfg configuration %s: could not parse "%s" as an integer for the configuartion index -a -i error: expected interface name after option %s -d -u -x -h --help --clientbatch --es Too few arguments wl cac_delts ver a b c where ver is the tspec version where a is byte[0] of tsinfo (bits 0-7) where b is byte[1] of tsinfo (bits 8-15) where c is byte[2] of tsinfo (bits 16-23) wl cac_addts ver dtoken tid dir psb up a b c d e ... where ver is the structure version where dtoken is the dialog token [range 1-255] where tid is the tspec identifier [range 0-7] where dir is direction [uplink | downlink | bi-directional] where psb is power save mode [legacy|U-APSD] where up is user priority [range 0-7] where a is the nominal MSDU size where b is bool for fixed size msdu [ 0 and 1] where c is the maximum MSDU size where d is the minimum service interval where e is the maximum service interval where f is the inactivity interval where g is the suspension interval where h is the minimum data rate where i is the mean data rate where j is the peak data rate where k is the max burst size where l is the delay bound where m is the surplus bandwidth [fixed point notation] 0X Mask invalid format. Needs to start with 0x Mask invalid format. Needs to be of even length %s: %2d.%-2d %s: CCK OFDM MCS 20MHz MCS 40MHz CCK CCK CDD 1x2 CCK CDD 1x3 Legacy OFDM Legacy OFDM 20MHz SISO MCS 0-7 20MHz SISO MCS 0-7 40MHz SISO Legacy OFDM 20MHz CDD MCS 0-7 20MHz 1 Tx MCS 0-7 20MHz 2 Tx MCS 0-7 20MHz 3 Tx MCS 8-15 20MHz 2 Tx MCS 8-15 20MHz 3 Tx MCS 16-23 20MHz 3 Tx Legacy OFDM 40MHz SISO Legacy OFDM 40MHz CDD MCS 0-7 40MHz 1 Tx MCS 0-7 40MHz 2 Tx MCS 0-7 40MHz 3 Tx MCS 8-15 40MHz 2 Tx MCS 8-15 40MHz 3 Tx MCS 16-23 40MHz 3 Tx MCS 32 20UL CCK 20UL CCK CDD 1x2 20UL CCK CDD 1x3 20UL Legacy OFDM 20UL Legacy OFDM CDD MCS 0-7 20UL 1 Tx MCS 0-7 20UL 2 Tx MCS 0-7 20UL 3 Tx MCS 8-15 20UL 2 Tx MCS 8-15 20UL 3 Tx MCS 16-23 20UL 3 Tx MCS 0-7 20MHz CDD MCS 0-7 20MHz STBC MCS 8-15 20MHz SDM MCS 0-7 40MHz CDD MCS 0-7 40MHz STBC MCS 8-15 40MHz SDM [ .5 (b) %d%s%s Could not parse "%s" as a regulatory revision in the country string "%s" Could not parse a 2-3 char country code in the country string "%s" -- wl_scan: missing " = " in long param "%s" wl_scan: missing value after " = " in long param "%s" wl_scan: only single char options, error on param "%s" wl_scan: missing value parameter after "%s" ssid ssid <%s> exceeds %d scan_type active passive prohibit scan_type value should be "active" or "passive", but got "%s" bss_type infra ibss adhoc any bss_type value should be "bss", "ibss", or "any", but got "%s" bssid could not parse "%s" as an ethernet MAC address nprobes could not parse "%s" as an int for value nprobes could not parse "%s" as an int for active dwell time could not parse "%s" as an int for passive dwell time could not parse "%s" as an int for home channel dwell time channels could not parse channel number starting at substring "%s" in list: %s , too many channels (more than %d) in channel list: %s ssid count %d exceeds max of %d additional ssids exceed params_size error parsing channel list arg wl_parse_assoc_params: missing " = " in long param "%s" wl_parse_assoc_params: missing value after " = " in long param "%s" wl_parse_assoc_params: only single char options, error on param "%s" wl_parse_assoc_params: missing value parameter after "%s" could not parse as an ethernet MAC address string "%s" before ',' or ' ' is too long could not parse chanspec starting at "%s" in list: %s too many chanspecs (more than %d) in chanspec list: %s error parsing chanspec list arg Bad value: %s %04d: %02x IE header truncated: ID: 0x%02X IE data truncated: ID: 0x%02X Len: %d ID: 0x%02X Len: %d Data: Data: <missing %d bytes> \x%02X %u.%u.%u.%u %02X auto %d Kbps %d%s Mbps WPA WPA2 %s/NONE %s/WEP40 %s/TKIP %s/AES %s/WEP104 %s/0x%x 0x%02x%02x%02x/0x%02x RSN: WPA: multicast cipher: WEP64 WEP128 TKIP AES-OCB AES-CCMP RSN Unknown-%s(#%d) Unknown-%02X:%02X:%02X(#%d) unicast ciphers(%d): NONE WEP64 WEP128 TKIP AES-OCB AES-CCMP WPA-Unknown-%s(#%d) AKM Suites(%d): None WPA WPA-PSK Unknown-%s(#%d) Unknown-%02X:%02X:%02X(#%d) Capabilities(0x%04x): No %sPre-Auth, %sPairwise, %d PTK Replay Ctr%s %d GTK Replay Ctr%s No %s Capabilities advertised SSID: "%s" Managed Ad Hoc <unknown> Mode: %s RSSI: %d dBm SNR: %d dB noise: %d dBm Flags: FromBcn Cached RSSI on-channel Channel: %s BSSID: %s Capability: ESS IBSS Pollable PollReq WEP ShortPre PBCC Agility ShortSlot CCK-OFDM Supported Rates: 802.11N Capable: 2.4 Chanspec: %sGHz channel %d %dMHz (0x%x) Control channel: %d 802.11N Capabilities: 40Mhz SGI20 SGI40 Supported MCS : [ Usage: %s [-a|i <adapter>] [-h] [-d|u|x] <command> [arguments] -h this message and command descriptions -h [cmd] command description for cmd -a, -i adapter name or number -d output format signed integer -u output format unsigned integer -x output format hexdecimal ccm ocb notx XX Failed to allocate buffer of %d bytes IOCTL GET command %d is not supported in batching mode Usage: %s antenna_index[0-3] nphy_rssiant nphy_rssiant ant%d = %d Usage: %s testindex[1-4] diag diag test %d failed(error code %d) diag test %d passed rm_rep Measurement Report: token %d, length %d Basic CCA RPI Report : %s Parallel | Late Incapable Refused flags : 0x%02x (%s) flags : 0x%02x token : %4d (a) channel : %4d %s start tsf: 0x%x:%08x duration : %4d TU Error: partial report element, %d report bytes remain, element claims %d Basic bits: 0x%08x Carrier Fraction: %d / 255 Power <= %3d: %3d %3d < Power <= %3d: %3d < Power : Report : %d <unknown> vendorid 0x%x deviceid 0x%x radiorev 0x%x chipnum 0x%x chiprev 0x%x chippackage 0x%x corerev 0x%x boardid 0x%x boardvendor 0x%x boardrev %s driverrev 0x%x ucoderev 0x%x bus 0x%x phytype 0x%x phyrev 0x%x anarev 0x%x ERROR: no valid ether addr provided sta_info ERROR: unknown driver station info version %d STA %s: rateset idle %d seconds in network %d seconds AUTHENTICATED ASSOCIATED AUTHORIZED state:%s%s%s BRCM ABCAP WME PS APSD_BE APSD_BK APSD_VI APSD_VO N_CAP flags 0x%x:%s%s%s%s%s%s%s%s%s tx pkts: %d tx failures: %d rx ucast pkts: %d rx mcast/bcast pkts: %d rate of last tx pkt: %d kbps rate of last rx pkt: %d kbps rx decrypt succeeds: %d rx decrypt failures: %d Usage: %s [channel | All ] per_chan_info Invalid Channel Not supported in current locale Channel %d A Band B Band , RADAR Sensitive , Restricted , Passive , Temporarily Out of Service for %d minutes set: error parsing value "%s" as an integer PAPD EPS TABLE: %d-j%d %d+j%d wowl_status Status of last wakeup: flags:0x%x Wake-on-Loss-of-Beacons enabled Wake-on-Magic frame enabled Wake-on-Net pattern enabled Wake-on-Deauth enabled Retrograde TSF enabled Test-mode enabled TPC: APs link margin:%d STAs link margin:%d bcmerrorstr %s: Error getting the last error %s: %s cur_mcsset -m parsing "%s", too many rates specified, max is %d rates unable to convert the rate parameter "%s" unable to convert trailing characters "%s" in the rate parameter "%s" empty legacy rateset not supported cur_rateset parsing "%s", too many mcs rates specified, max is %d rates unable to convert the mcs parameter "%s" set: missing arguments set: error parsing value "%s" as an integer for set of "%s" sample_collect Expect SampleData Header type %d, receive type %d Header sync word mismatch (0x%08x) Failed write file-header to file %d sample_data Error reading back sample collected data Expect SampleData type %d, receive type %d Done retrieving sample data Error writing %d bytes to file, rc %d! Wrote %d bytes Ignoring arguments for %s curppr Current channel: %s BSS channel: %s Power/Rate Dump (in 1/2dB): Channel %d 20MHz: CCK %2d %2d %2d %2d CCK CDD 1x2 %2d %2d %2d %2d CCK CDD 1x3 %2d %2d %2d %2d OFDM %2d %2d %2d %2d %2d %2d %2d %2d OFDM-CDD %2d %2d %2d %2d %2d %2d %2d %2d MCS-SISO MCS-CDD MCS STBC MCS 8~15 1 Nsts 1 Tx 1 Nsts 2 Tx 1 Nsts 3 Tx 2 Nsts 2 Tx 2 Nsts 3 Tx 3 Nsts 3 Tx %s %2d %2d %2d %2d %2d %2d %2d %2d 40MHz: MCS32 %2d 20 in 40MHz: Incorrect version of delta stats struct: expected %d; got %d %s %d txframe txbyte txretrans txfail rxframe rxbyte rx1mbps rx2mbps rx5mbps5 rx6mbps rx9mbps rx11mbps rx12mbps rx18mbps rx24mbps rx36mbps rx48mbps rx54mbps Incorrect version of counters struct: expected %d; got %d Displayed values may be incorrect txerror rxerror txprshort txdmawar txnobuf txnoassoc txchit txcmiss txcongest reset txserr txphyerr txphycrs tbtt d11_txfrag %d d11_txmulti %d d11_txretry %d d11_txretrie %d d11_txrts %d d11_txnocts %d d11_txnoack %d d11_txfrmsnt %d rxcrc rxnobuf rxnondata rxbadds rxbadcm rxdup rxfragerr rxrunt rxgiant rxnoscb rxbadproto rxbadsrcmac d11_rxfrag %d d11_rxmulti %d d11_rxundec %d rxctl rxbadda rxfilter rxuflo: txallfrm txrtsfrm txctsfrm txackfrm txdnlfrm txbcnfrm txtplunfl txfunfl: tkipmicfaill tkipicverr tkipcntrmsr tkipreplay ccmpfmterr ccmpreplay ccmpundec fourwayfail wepundec wepicverr decsuccess rxundec rxfrmtoolong rxfrmtooshrt rxinvmachdr rxbadfcs rxbadplcp rxcrsglitch rxstrt rxdfrmucastmbss rxmfrmucastmbss rxcfrmucast rxrtsucast rxctsucast rxackucast rxdfrmocast rxmfrmocast rxcfrmocast rxrtsocast rxctsocast rxdfrmmcast rxmfrmmcast rxcfrmmcast rxbeaconmbss rxdfrmucastobss rxbeaconobss rxrsptmout bcntxcancl rxf0ovfl rxf1ovfl rxf2ovfl txsfovfl pmqovfl rxcgprqfrm rxcgprsqovfl txcgprsfail txcgprssuc prs_timeout rxnack frmscons txnack txglitch_nack txburst txphyerror txchanrej pktengrxducast pktengrxdmcast txmpdu_sgi rxmpdu_sgi txmpdu_stbc rxmpdu_stbc %s: tx frames: %d bytes: %d failed frames: %d failed bytes: %d rx frames: %d bytes: %d failed frames: %d failed bytes: %d foward frames: %d bytes: %d tx frames time expired: %d There is no ACS recorded current timestamp: %u (ms) Timestamp(ms) ACS Trigger Selected Channel Glitch Count CCA Count %10u %s %10d %12d %8d Feature is stopped due to noisy environment is is not non-home Interference %s detected. last interference at timestamp %d: source is %s on %s channel -csa -curband Need value following %s -c -cs -s %d: Num of seconds must be <= %d CCA: Can't get currrent chanspec Using channel %d Bogus num of seconds returned %d chan dur ibss obss interf time %-3u %4d %4u %2d%% %-6s %4u %2d%% %-6s %4u %2d%% %-6s %d Summaries: chan dur ibss obss interf num seconds %-3u %4d %4s %2d%% %-6s %4s %2d%% %-6s %4s %2d%% %-6s %d Cannot find a good channel due to: %s Recommended channel: %d get external assert logs: %d Version mismatch: version = 0x%x, expected 0x%x id: time(ms) string %d: %d %s No args provided Packets matched for filter '%d': %d Total packets discarded : %d Total packet forwarded : %d Num filters: %d Id :%d Negate :%d Type :%d Offset :%d Pattern len :%d Mask :0x %02x Pattern :0x Lost frame count %d RSSI %d Signal to noise ratio %d Rates: %.2d %d.%d Mbit/s %.2d %d Mbit/s MCS indexes: %d MCS %d tx_summed = %d tx_iph_fill = %d tx_tcp_fill = %d tx_udp_fill = %d tx_icmp_fill = %d rx_iph_good = %d rx_iph_bad = %d rx_tcp_good = %d rx_tcp_bad = %d rx_udp_good = %d rx_udp_bad = %d rx_icmp_good = %d rx_icmp_bad = %d tx_tcp_errinj = %d tx_udp_errinj = %d tx_icmp_errinj = %d rx_tcp_errinj = %d rx_udp_errinj = %d rx_icmp_errinj = %d Cannot set toe stats, use 'wl toe_stats_clear' to clear the counters host_ip_entries = %d host_ip_overflow = %d arp_table_entries = %d arp_table_overflow = %d host_request = %d host_reply = %d host_service = %d peer_request = %d peer_request_drop = %d peer_reply = %d peer_reply_drop = %d peer_service = %d Cannot set arp stats, use 'wl arp_stats_clear' to clear the counters wl cac_delts_ea ver 0xaa 0xbb 0xcc xx:xx:xx:xx:xx:xx where 0xaa is byte[0] of tsinfo (bits 0-7) where 0xbb is byte[1] of tsinfo (bits 8-15) where 0xcc is byte[2] of tsinfo (bits 16-23) where xx:xx:xx:xx:xx:xx is mac address ) MAC address must be specified Malformed MAC address parameter wl cac_tspec 0xaa 0xbb 0xcc xx:xx:xx:xx:xx:xx tsinfo 0x%02X 0x%02X 0x%02X TID %d User Prio %d Direction %d This command can only be executed on the STA wl cac_tspec 0xaa 0xbb 0xcc vndr_ie Total IEs %d IE index = %d ----------------- Pkt Flg = 0x%x Length = %d OUI = %02x:%02x:%02x Error %d getting IOVar nvget: missing arguments nvget error: extra arg "%s" nvram_get nvdump error: extra arg "%s" nvram_dump Unknown dfs state %d. state %s time elapsed %dms radar channel cleared by dfs channel spec %d channel %d not supported on this chip rssi[%d] %d get: missing arguments get: error, extra arg "%s" SROM OTP Unrecognized source %d Unable to get remote endpoint's hwaddr Unable to get local endpoint's WPA role supplicant authenticator Local endpoing's WPA role: %s List of DPT connections: %s: status 0x%x rx %d tx %d rssi %d sample_collect.dat -f -t crs crs_deassert good_fcs bad_fcs bad_plcp crs_glitch gpio -b -g -e --agc --filter -v Failed to allocate dump buffer of %d bytes wb Problem opening file %s Receive: good packet %d, bad packet %d, othercast good packet %d Transmit: good packet %d, bad packet %d %c a b ? %s %s %d mW (%d.%d dBm) CCK %d OFDM %d txinstpwr Last B phy CCK est. power: %2d.%d dBm Last B phy OFDM est. power: %2d.%d dBm Last A phy est. power: %2d.%d dBm eirp Current channel: %s User Target: %2d.%-2d dBm Regulatory Local Max: %2d.%-2d dBm Regulatory Local Constraint: %2d.%-2d dB Yes, channel is EIRP No, channel is Conducted Antgain used in Channel Max: %s Hardware Power Control: HW PWRCTL On HW PWRCTL Off Regulatory Channel Max: %2d.%-2d dBm SROM antgain: 2G: %d.%d dB, 5G: %d.%d dB Min of Reg & Local Limits: CCK: %d.%d OFDM: Last B phy CCK est. power: %2d.%-2d dBm Last B phy OFDM est. power: %2d.%-2d dBm Srom limit B/G: Last B phy target power: Last A phy est. power: %2d.%-2d dBm Srom limit A: OFDM: Last A phy target power: On Off HW SW Power Control: %s, %s BSS Local Max: %2d.%-2d dBm BSS Local Constraint: %2d.%-2d dB User Target: %2d.%-2d dBm SROM antgain: 2G: %d.%d dB, 5G: %d.%d dB Regulatory Limits: Board Limits: Power Target: Last est. power: %d.%d Last est. power: %d.%d dBm Last CCK est. power: %d.%d dBm Maximum Power Target among all rates: Rate index with Maximum Power Target: %d Last adjusted est. power : Key index %d out of range. Should be positive. Key %d TSC: 0x%04x:%08x wsec Could not query wsec status. %3d: <empty> %3d - %3d: <empty> (default) %3d: %-17s Key %d: %s No key present soft len %d, data 0x (%.*s) Sorry, your driver has bss_info_version %d but this program supports only version %d. Not associated. Last associated with iscanresults wl_get_iscan buflen 0 iscanresults incomplete iscanresults complete iscanresults pending iscanresults aborted iscanresults returned unknown status %d missing country abbrev invalid country abbrev: %s missing band unsupported band: %s wl_dump_chanspecs %s: could not parse "%s" as an int for band %s: invalid band %d %s: could not parse "%s" as an int for bandwidth %s: invalid bandwidth %d %s: please provide country abbrev %s: you need to set a band, '-b <5|2>' %s: you need to set a bandwidth, '-w <20|40>' %s (0x%04x) wlc_get noise failed with retcode:%d monitor_lq_status wlc_get lq_status failed with retcode:%d Stats collection currently disabled['wl monitor_lq 1' to enable statistics collection] rss: %d, %d, %d snr: %d, %d, %d %d.%d RC%d.%d ver bcmerror Error %d on query of driver dump pmkid entries : %d PMKID[%d]: %s = set cmd ignored Assoc req: len 0x%x capab 0x%x listen 0x%x reassoc bssid %s assoc_req_ies assoc req IEs: 0x%02x Assoc resp: status 0x%x aid 0x%x assoc_resp_ies assoc resp IEs: 0x%02x mbss16 mbss4 Byte count %d is odd srom[%03d]: 0x%04x dump: error on query of WLC_DUMP dump: error on query of dump list Version mismatch, please upgrade Invalid byte count %d, must be even Count %d too large cisdump Failed cisdump request: %d Built-in default External SPROM Internal OTP Unknown? Source: %d (%s) Maximum length: %d bytes Byte %3d: Wrote %d bytes to %s malloc(%d) failed, free %d batched commands and exit batching mode batching %dth command %d calling add_one_batched_cmd() at non-command-batching mode, weird rrm_nbr_req ssid too long pkt_filter_add Polarity not provided Filter type not provided Offset not provided Bitmask not provided Pattern not provided Mask and pattern not the same size Period (msec) :%d Length :%d Packet :0x keep_alive Network packet not provided add del clr wowl_pattern Starting offset not provided Mask not provided Pattern value not provided #of patterns :%d Pattern %d: Offset :%d Masksize :%d Mask :0x PatternSize:%d Pattern :0x wowl_pkt Dest of the packet needs to be provided bcast ff:ff:ff:ff:ff:ff ucast EA of ucast dest of the packet needs to be provided type - magic/net needs to be provided magic net pattern not provided %s: AP only wme_maxbw_params WME bandwidth limit: %s: bandwidth limit %d be bk vi vo Unknown access category: %s wme_dp Discard oldest first: BE=%d BK=%d VI=%d VO=%d %s: Invalid parameter %s: STA only wme_qosinfo Max SP Length = %d, APSD: BE=%d BK=%d VI=%d VO=%d ap Can't work with AP parameters on STA wme_ac_sta wme_ac_ap for STA advertised for STA for AP AC Parameters %s Warning: AC params out of order %s: raw: ACI 0x%x ECW 0x%x TXOP 0x%x dec: aci %d acm %d aifsn %d ecwmin %d ecwmax %d txop 0x%x eff: CWmin %d CWmax %d TXop %dusec acm on acm value must be 1|0 aifsn aifsn %d out of range (%d-%d) ecwmax ecwmax %d out of range (%d-%d) ecwmin ecwmin %d out of range (%d-%d) txop txop %d out of range (%d-%d) unexpected param %s wme_tx_params WME TX params: %s: short %d. sfb %d. long %d. lfb %d. max %d Unknown access class: %s sfb lfb max_rate max Unknown parameter: %s Value for %s must be < %d b/g join_pref Pref RSSI <%d extra bytes in pref data> Pref BAND: len = %d <band pref data truncated> 0x%x AUTO (no preference) 0x%x 5 GHz 0x%x 2.4 GHz 0x%x Use ASSOC_PREFER value Pref WPA: len = %d <WPA pref data truncated> %d ACP Specs %s-NONE U: M: Any <expected %d more specs, %d bytes> <%d extra bytes> RSSI Delta for Pref BAND: len = %d <rssi delta pref data truncated> RSSI boost %ddb Pref 0x%x: len = %d rm_req wl_rm_request %s: could not parse "%s" as an int for the token %s: could not parse "%s" as an int for channel %s: could not parse "%s" as an int for duration basic cca rpi %s: could not parse "%s" as a measurement type %s: no measurement requests specified nvset nvset: missing arguments nvset error: extra arg "%s"; format is name=value (no spaces around '=') nvset error: no '=' in "%s", format is name=value (no spaces around '=') get returned error 0x%x set returned error 0x%x seq_stop calling seq_stop when it's already out of batching mode no command batched seq_start failed to send seq_start seq_list failed to send seq_list failed to send seq_stop calling seq_start() when it's already in batching mode txpwrindex for core{0...3}: %d %d %d %d HTPHY must specify 3 core txpwrindex NPHY must specify 2 core txpwrindex scb_probe timeout:%d sec, activity_time:%d sec, nprobes:%d mfp_reassoc mfp_auth mfp_assoc mfp_deauth mfp_disassoc mfp_sha256 mfp tsf 0x%08X 0x%08X %s: %s: error parsing "%s" as an integer dngl_wd wd: on exptime: %dsec wd: off clear wowl_wakeind PCI Indication set MAC Indication set MAGIC packet received Packet received with Netpattern Disassociation/Deauth received Retrograde TSF detected Beacons Lost Test Mode Broadcast/Mcast frame received Unicast frame received No wakeup indication set txcore offsets qdBm: %d %d %d %d txchain C3C2C1C0: fixed 0x%04X %s invalid %d args UTX 0x%02x Invaild UTX parameter: %s URX 0x%02x Invaild URX parameter: %s DTX 0x%02x Invaild DTX parameter: %s DRX 0x%02x Invaild DRX parameter: %s Set rifs mode advertisement error %d Set frameburst error %d Set rifs error %d wl_rxiqest %s: could not parse "%s" as an int for gain-correction (0, 1) %s: invalid gain-correction select %d (0,1) %s: could not parse "%s" as an int for lpf-hpc override select (0, 1) %s: invalid lpf-hpc override select %d (0,1) %s: could not parse "%s" as an int for resolution (0, 1) %s: invalid resolution select %d (0,1) %s: could not parse "%s" as an int for the sample count %s: sample count too large %d(10 <= x <= 16) %s: could not parse "%s" as an int for antenna (0, 1, 3) %s: invalid antenna select %d -%d.%ddBm %d.%ddBm %ddBm %ddBm %ddBm %ddBm %ddBm %s (0x%x) invalid chanspec (0x%x) %d (0x%x) qtxpower (Override ON) %d.%d dBm = %d mw. %s TxPower is %d qdbm, %d.%d dbm, %d mW Override is %s -o -q smfstats wpa_auth 0x%x Disabled %s is not a valid WPA auth mode Inavlid user argument. Values may be a bitvector or list of names from the set. 0x%04x %s CHANIM mode: disabled. CHANIM mode: detect only. CHANIM mode: detect + act. wl_chanspec %s: could not parse "%s" as an int for the channel %s: invalid channel %d %s: could not parse "%s" as an int for ctl sideband %s: invalid ctl sideband %d %s: you need to set a channel, '-c <ch>' %s: you need to set a ctl sideband, '-s <-1|0|1>' Chanspec set to 0x%x fixed mcs only mcs index %d stf mode %d %s legacy rate %d%s Mbps stf mode %d %s wl_nrate %s: could not parse "%s" as a rate value %s: cannot use -r and -m %s: could not parse "%s" as an int for mcs %s: could not parse "%s" as an int for stf mode %s: can use -w only with -m %s: you need to set a legacy or mcs rate a_%s bg_%s phymsglevel 0x%x Bits >32 are not supported on this driver version msg values may be a list of numbers or names from the following set. Use a + or - prefix to make an incremental change. 0x%04x %s , %s all Bad Args: at least one rate must be marked Basic Error setting variable %s Error getting variable %s gpioout gpiocontrol 0x%x gpioout 0x%x gpioouten 0x%x down iscan_s iscan_c unknown iscan command: %s --duration= Error allocating %d bytes for scan params iscan escan escanabort unknown escan command: %s CCK %s: %2d 2.4GHz : %2d 5GHz (lower) : %2d 5GHz (middle): %2d 5GHz (high) : %2d 5GHz (upper) : %2d error: missing arguments unable to allocate frame mfp_sa_query only 4 led supported TRUE FALSE led%d, blink_sync is %s illegal command! Usage: ledbh [led#] [behavior#] wl_ledbh: fail to get. code %x wl_ledbh: fail to set wl_ledbh: fail to get led %d behavior %d wl mimo_ss_stf: bad stf mode. wl mimo_ss_stf: wrong -b option, "-b a" or "-b b" -w Invalid channel %d Too many channels (max 14) With option '-c' specified, a channel list is required %d %d %d %d %d %d %d Too few/many arguments (require %d, got %d) passive dwell not in range %d active dwell not in range %d Width Trigger Scan Interval not in range %d Width Channel Transition Delay Factor not in range %d Passive Total per Channel not in range %d Active Total per Channel not in range %d Activity Threshold not in range %d Enable/disable value not provided pkteng_stop tx rx pkteng pkteng_start txwithack async sync rxwithack Invalid command name %s Missing ag0 Missing ag1 wl_antgain: fail to set wl_antgain: fail to get antgain ag0=%x ag1=%x Missing maxp2ga0 Missing maxp2ga1 Missing maxp5ga0 Missing maxp5ga1 Missing maxp5gla0 Missing maxp5gla1 Missing maxp5gha0 Missing maxp5gha1 maxpower wl_phy_maxpower: fail to set wl_phy_maxpower: fail to get maxpower maxp2ga0=%x maxp2ga1=%x maxp5ga0=%x maxp5ga1=%x maxp5gla0=%x maxp5gla1=%x maxp5gha0=%x maxp5gha1=%x tssipos2g extpagain2g pdetrange2g triso2g antswctl2g wl_phy_fem: fail to set fem2g fem2g set tssipos5g extpagain5g pdetrange5g triso5g antswctl5g wl_phy_fem: fail to set fem5g fem5g set wl_phy_fem: fail to get fem2g tssipos2g=0x%x extpagain2g=0x%x pdetrange2g=0x%x triso2g=0x%x antswctl2g=0x%x wl_phy_fem: fail to get fem5g tssipos5g=0x%x extpagain5g=0x%x pdetrange5g=0x%x triso5g=0x%x antswctl5g=0x%x cck2gpo ofdm2gpo ofdm5glpo ofdm5gpo ofdm5ghpo wl_phy_povars: fail to set phy %x band %x err %d cck2gpo=0x%x ofdm2gpo=0x%x ofdm5glpo=0x%x ofdm5gpo=0x%x ofdm5ghpo=0x%x %s=0x%x wl_phy_pavars: fail to set phy %x band %x chain %d err %d 0x%x(%d) %d %d %d %d %d %d lpphy_txlocc Total %d host addresses toe_ol arp_ol txfifo_sz fifo %d size %d txcore enabled bitmap (Nsts {4..1}) 0x%02x 0x%02x 0x%02x 0x%02x txcore mask OFDM 0x%02x CCK 0x%02x wl_txcore %s: could not parse "%s" as an int for streams %s: Nsts > %d %s: could not parse "%s" as an int for stf core %s: %1d-stream core cannot be zero %s: OFDM core cannot be zero %s: CCK core cannot be zero %s: require to set both -s x -c y cac_addts cac_delts unknown command uplink downlink bi-directional legacy U-APSD Setting min_phy_rate to 0x%x Invalid packet flag 0x%x (%d) IE length is %d, should be <= %d IE length is %d, should be >= %d Invalid OUI length %d Data bytes should be specified for IE of length %d Please specify all the data bytes for this IE Ignoring data bytes for IE of length %d memory alloc failure Error parsing OUI arg Error parsing data arg lifetime Lifetime for access class '%s' is %dms error: missing count error: missing channel Error: bad parameters "%s" Wrong syntax => dev offset [val] Incorrect version of RADAR_ARGS struct: expected %d; got %d version %d npulses %d ncontig %d min_pw %d max_pw %d thresh0 0x%x thresh1 0x%x blank 0x%x fmdemodcfg 0x%x npulses_lp %d min_pw_lp %d max_pw_lp %d min_fm_lp %d max_span_lp %d min_deltat %d max_deltat %d autocorr 0x%x st_level_time 0x%x t2_min %d fra_pulse_err %d npulses_fra %d npulses_stg2 %d npulses_stg3 %d percal_mask 0x%x quant %d min_burst_intv_lp %d max_burst_intv_lp %d nskip_rst_lp %d max_pw_tol %d feature_mask 0x%x Name must be less than 32 characters dpt_fname passphrase must be between %d and %d characters long dpt_pmk wl_actframe: unable to allocate frame actframe create modify delete error: invalid mode string error: missing ea error: could not parse MAC address %s dpt_endpoint remove error: missing mode value dpt_deny error: missing address ampdu_send_delba ampdu_send_addba ampdu_rr_retry_limit_tid AMPDU regular rate retry limit for tid %d: %d ampdu_retry_limit_tid AMPDU retry limit for tid %d: %d ampdu_tid AMPDU for tid %d: %d %d %d ampdu_activate_test ie tag:0x%x ie len:0x%x ie data: country ie len is odd(%d), padding by 1 octet Error allocating %d bytes country ie tpc error: unknown measurement type %s error: missing target address wds_wpa_role Unable to set local endpoint's WPA role Invalid WPA role %s. %u:authenticator, %u:supplicant, %u:auto Local endpoint's WPA role: %s Too many arguments (%d) for command %s %s (%s/%d) %s No country set %s () %s Supported countries: country code and long name %s %s Argument "%s" could not be parsed as a country name, country code, or country code and regulatory revision. Argument 1 "%s" could not be parsed as a country code, or country code and regulatory revision. Argument "%s" had a revision. Arg 2 must be a country name or country code without a revision Argument 2 "%s" could not be parsed as a country name or country code Driver does not support full country spec interface, only a country name or code may be sepcified Interference override NONE, all mitigation disabled. (mode 0) Interference override enabled. Non-wireless LAN Interference mitigation is enabled. (mode 1) Interference override enabled. Wireless LAN Interference mitigation is enabled. (mode 2) Interference override enabled. Interference mitigation is enabled and not active. (mode 3) not active, and noise reduction is enabled. (mode 4) Interference override disabled. All interference mitigation is disabled. (mode 0) Wireless LAN Interference mitigation is enabled. (mode 2) Auto Wireless LAN Interference mitigation is enabled and rb %s: No such file or directory error %d reading %s File %s too large File %s looks like an nvserial file, use nvotpw nvserial File %s is not an nvserial file File %s has an odd length (%d) raw Writing %d bytes from %s file %s to otp ... Error %d writing %s to otp Programming %s... error reading %s Committing image to flash... Done Successfully downloaded %d bytes *** UPGRADE FAILED! *** (status %ld) unrecognized band value %d Problem parsing MAC address "%s". tx %s bb/radio/ctl1 %d/%d/%d manual SSID Current %s: "%s" SSID arg "%s" must be 32 chars or less Setting %s: "%s" Error allocating %d bytes for assoc params wepkey wep Invalid key index %d specified imode %s %s: expected argument after "infra" keyword but command line ended. ad-hoc managed %s %s: unrecongnized parameter "%s" after "infra" keyword amode open openshared wpanone wpapsk wpa2 wpa2psk %s %s: unable to parse parameter "%s" Need to specify at least one parameter insufficient arguments wsec test_type may be a number or name from the following set: rmwep wsec_key addwep No key specified Key %d is primary No primary key set STA MAC must be specified Malformed STA MAC parameter Loose interpretation of 11h spec - may join non 11h AP. Strict interpretation of 11h spec - may not join non 11h AP. 802.11d mode Loose interpretation of 11h+d spec - may join non-11h APs invalid value 0x%x no arguments to wl_reassoc could not parse %s as an Ethernet MAC address could not parse reassociation parameters 0x%04x debug unknown Scan in progress. current scan channel %d No scan in progress. current mac channel %d target channel %d Warning: Basic rate attribute ignored for "%s" command msglevel 0x%x%08x Msg bits >32 take only numerical input in hex Invalid entry for msglevel 0x%x00000000 %s rdvar wrvar cisconvert cis_source RAW manf productname manfid prodid macaddr Argument does not look like a MAC address: %s ccode rssismf2g rssismc2g rssisav2g bxa2g rssismf5g rssismc5g rssisav5g bxa5g uuid buffer size %d bytes: 0x%.02x Nothing to write! cisvar Bad variable name: %s Variable %s does not exist in sromrev %d %s=%s %s=%d %s=%u wrvar missing value to write for variable %s Bad value: %s for variable %s Error %d writing the srom srclear srcrc error parsing value "%s" as an integer for byte count File %s is too large File %s is %d bytes but lacks a REV4/ signature File %s is %d bytes, not %d or %d or %d bytes srcrc only takes one arg %s is not an integer Byte offset (%d) is odd or negative Data extends past %d bytes Writing srom. ioctl %d, iolen %d, sroff %d, len %d band option "all" is for set only, not get %s is 0x%04x(%d) radioreg syn tx0 tx1 rx0 rx1 cr1 cr2 cr0 54g LRS 54g Legacy B 54g Auto 54g Only 54g Performance %s (%d) gonly perf lrs --preview cisupdate hex string must contain an even number of digits cisupdate invalid hex digit(s) in %s cisupdate failed to read cis: %d cisupdate offset %d plus update len %d exceeds CIS len %d cisupdate: OTP update incompatible: update[%d](0x%02x)->cis[%d](0x%02x) ciswrite offset %d data %s cislen %d cisupdate cis write failed: %d len %d sizeof(cish) %d total %d ciswrite failed: %d get version information cmds generate a short list of available commands reinitialize and mark adapter up (operational) reset and mark adapter down (disabled) mark adapter down but do not reset hardware(disabled) On dualband cards, cards must be bandlocked before use. clk set board clock state. return error for set_clk attempt if the driver is not down 0: clock off 1: clock on restart Restart driver. Driver must already be down. reboot Reboot platform Set the radio on or off. "on" or "off" Give suboption "list" to list various suboptions Clears first 'len' bytes of the srom, len in decimal or hex Usage: srclear <len> srdump print contents of SPROM to stdout srwrite Write the srom: srwrite byteoffset value Get the CRC for input binary file Write specified <file> to the SDIO CIS source (either SROM or OTP) cisupdate Write a hex byte stream to specified byte offset to the CIS source (either SROM or OTP) --preview option allows you to review the update without committing it <byte offset> <hex byte stream> [--preview] Display the content of the SDIO CIS source -b <file> -- also write raw bytes to <file> <len> -- optional count of bytes to display (must be even) Display which source is used for the SDIO CIS Print CIS tuple for given name=value pair Read a named variable to the srom Write a named variable to the srom nvram_source Display which source is used for nvram print nvram variables to stdout set an nvram variable name=value (no spaces around '=') nvget get the value of an nvram variable revinfo get hardware revision information customvar1 print the value of customvar1 in hex format set driver console debugging message bitvector type 'wl msglevel ?' for values set phy debugging message bitvector type 'wl phymsglevel ?' for values PM set driver power management mode: 0: CAM (constantly awake) 1: PS (power-save) 2: FAST PS mode wake set driver power-save mode sleep state: 0: core-managed 1: awake promisc set promiscuous mode ethernet address reception 0 - disable 1 - enable monitor set monitor mode 0 - disable 1 - enable active monitor mode (interface still operates) frag Deprecated. Use fragthresh. rts Deprecated. Use rtsthresh. cwmin Set the cwmin. (integer [1, 255]) cwmax Set the cwmax. (integer [256, 2047]) srl Set the short retry limit. (integer [1, 255]) lrl Set the long retry limit. (integer [1, 255]) force a fixed rate: valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54) valid values for 802.11b are (1, 2, 5.5, 11) valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54) -1 (default) means automatically determine the best rate mrate force a fixed multicast rate: valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54) valid values for 802.11b are (1, 2, 5.5, 11) valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54) -1 (default) means automatically determine the best rate a_rate force a fixed rate for the A PHY: valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54) -1 (default) means automatically determine the best rate a_mrate force a fixed multicast rate for the A PHY: valid values for 802.11a are (6, 9, 12, 18, 24, 36, 48, 54) -1 (default) means automatically determine the best rate bg_rate force a fixed rate for the B/G PHY: valid values for 802.11b are (1, 2, 5.5, 11) valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54) -1 (default) means automatically determine the best rate bg_mrate force a fixed multicast rate for the B/G PHY: valid values for 802.11b are (1, 2, 5.5, 11) valid values for 802.11g are (1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54) -1 (default) means automatically determine the best rate Set Infrastructure mode: 0 (IBSS) or 1 (Infra BSS) Set AP mode: 0 (STA) or 1 (AP) Get the BSSID value, error if STA and not associated bssmax get number of BSSes Set the channel: valid channels for 802.11b/g (2.4GHz band) are 1 through 14 valid channels for 802.11a (5 GHz band) are: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 184, 188, 192, 196, 200, 204, 208, 212, 216 Get the current mcs set Get all the valid chanspecs (default: all within current locale): -b band (5(a) or 2(b/g)) -w bandwidth, 10,20 or 40 [-c country_abbrev] Set <channel>[a,b][n][u,l] channel number (0-224) band a=5G, b=2G, default to 2G if channel <= 14 bandwidth, n=10, none for 20 & 40 ctl sideband, l=lower, u=upper OR Set channel with legacy format: -c channel number (0-224) -b band (5(a) or 2(b/g)) -w bandwidth, 10,20 or 40 -s ctl sideband, -1=lower, 0=none, 1=upper dfs_channel_forced Set <channel>[a,b][n][u,l] channel number (0-224) band a=5G, b=2G, default to 2G if channel <= 14 bandwidth, n=10, non for 20 & 40 ctl sideband, l=lower, u=upper tssi Get the tssi value from radio txpwr Set tx power in milliwatts. Range [1, 84]. txpwr1 Set tx power in in various units. Choose one of (default: dbm): -d dbm units -q quarter dbm units -m milliwatt units Can be combined with: -o turn on override to disable regulatory and other limitations Use wl txpwr -1 to restore defaults txpathpwr Turn the tx path power on or off on 2050 radios txpwrlimit Return current tx power limit powerindex Set the transmit power for A band(0-63). -1 - default value atten Set the transmit attenuation for B band. Args: bb radio txctl1. auto to revert to automatic control manual to supspend automatic control phyreg Get/Set a phy register: offset [ value ] [ band ] Get/Set a radio register: offset [ value ] [ band/core ] HTPHY: Get a radio register: wl radioreg [ offset ] [ cr0/cr1/cr2 ] Set a radio register: wl radioreg [ offset ] [ value ] [ cr0/cr1/cr2/all ] ucflags Get/Set ucode flags 1, 2, 3(16 bits each) offset [ value ] [ band ] shmem Get/Set a shared memory location: offset [ value ] [band ] macreg Get/Set any mac registers(include IHR and SB): macreg offset size[2,4] [ value ] [ band ] ucantdiv Enable/disable ucode antenna diversity (1/0 or on/off) Set any GPIO pins to any value. Use with caution as GPIOs would be assigned to chipcommon Usage: gpiomask gpioval devpath print device path pllreset set the pll to reset value Usage: wl pllreset pcieserdesreg g/set SERDES registers: dev offset [val] actiate enable/disable per-tid ampdu; usage: wl ampdu_tid <tid> [0/1] Set per-tid ampdu retry limit; usage: wl ampdu_retry_limit_tid <tid> [0~31] Set per-tid ampdu regular rate retry limit; usage: wl ampdu_rr_retry_limit_tid <tid> [0~31] send addba to specified ea-tid; usage: wl ampdu_send_addba <tid> <ea> send delba to specified ea-tid; usage: wl ampdu_send_delba <tid> <ea> ampdu_clear_dump clear ampdu counters adds/removes ea to dpt deny list usage: wl dpt_deny <add,remove> <ea> creates/updates/deletes dpt endpoint for ea usage: wl dpt_endpoint <create, update, delete> <ea> sets DPT pre-shared key sets/gets DPT friendly name dpt_list gets status of all dpt peers Send a Vendor specific Action frame to a channel usage: wl actframe <Dest Mac Addr> <data> channel dwell-time <BSSID> antdiv Set antenna diversity for rx 0 - force use of antenna 0 1 - force use of antenna 1 3 - automatic selection of antenna diversity txant Set the transmit antenna 0 - force use of antenna 0 1 - force use of antenna 1 3 - use the RX antenna selection that was in force during the most recently received good PLCP header plcphdr Set the plcp header. "long" or "auto" or "debug" phytype Get phy type rateparam set driver rate selection tunables arg 1: tunable id arg 2: tunable value wepstatus Set or Get WEP status wepstatus [on|off] primary_key Set or get index of primary key Set an encryption key. The key must be 5, 13 or 16 bytes long, or 10, 26, 32, or 64 hex digits long. The encryption algorithm is automatically selected based on the key size. keytype is accepted only when key length is 16 bytes/32 hex digits and specifies whether AES-OCB or AES-CCM encryption is used. Default is ccm. WAPI is selected if key len is 32 and arguments contain wapi. addwep <keyindex> <keydata> [ocb | ccm | wapi] [notx] [xx:xx:xx:xx:xx:xx] Remove the encryption key at the specified key index. keys Prints a list of the current WEP keys tsc Print Tx Sequence Couter for key at specified key index. wsec_test Generate wsec errors wsec_test <test_type> <keyindex|xx:xx:xx:xx:xx:xx> type 'wl wsec_test ?' for test_types tkip_countermeasures Enable or disable TKIP countermeasures (TKIP-enabled AP only) 0 - disable 1 - enable wsec_restrict Drop unencrypted packets if WSEC is enabled 0 - disable 1 - enable eap restrict traffic to 802.1X packets until 802.1X authorization succeeds 0 - disable 1 - enable cur_etheraddr Get/set the current hw address perm_etheraddr Get the permanent address from NVRAM authorize restrict traffic to 802.1X packets until 802.1X authorization succeeds deauthorize do not restrict traffic to 802.1X packets until 802.1X authorization succeeds deauthenticate deauthenticate a STA from the AP with optional reason code (AP ONLY) wireless security bit vector 1 - WEP enabled 2 - TKIP enabled 4 - AES enabled 8 - WSEC in software 0x80 - FIPS enabled 0x100 - WAPI enabled set/get 802.11 authentication type. 0 = OpenSystem, 1= SharedKey, 2=Open/Shared Bitvector of WPA authorization modes: 1 WPA-NONE 2 WPA-802.1X/WPA-Professional 4 WPA-PSK/WPA-Personal 64 WPA2-802.1X/WPA2-Professional 128 WPA2-PSK/WPA2-Personal 0 disable WPA wpa_cap set/get 802.11i RSN capabilities set_pmk Set passphrase for PMK in driver-resident supplicant. scan Initiate a scan. Default to an active scan across all channels for any SSID. Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated). Options: -s S, --ssid=S SSIDs to scan -t ST, --scan_type=ST [active|passive|prohibit] scan type --bss_type=BT [bss/infra|ibss/adhoc] bss type to scan -b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx -n N, --nprobes=N number of probes per scanned channel -a N, --active=N dwell time per channel for active scanning -p N, --passive=N dwell time per channel for passive scanning -h N, --home=N dwell time for the home channel between channel scans -c L, --channels=L comma or space separated list of channels to scan Initiate an incremental scan. Default to an active scan across all channels for any SSID. Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated). Options: -s S, --ssid=S SSIDs to scan -t ST, --scan_type=ST [active|passive|prohibit] scan type --bss_type=BT [bss/infra|ibss/adhoc] bss type to scan -b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx -n N, --nprobes=N number of probes per scanned channel -a N, --active=N dwell time per channel for active scanning -p N, --passive=N dwell time per channel for passive scanning -h N, --home=N dwell time for the home channel between channel scans -c L, --channels=L comma or space separated list of channels to scan Continue an incremental scan. Default to an active scan across all channels for any SSID. Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated). Options: -s S, --ssid=S SSIDs to scan -t ST, --scan_type=ST [active|passive|prohibit] scan type --bss_type=BT [bss/infra|ibss/adhoc] bss type to scan -b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx -n N, --nprobes=N number of probes per scanned channel -a N, --active=N dwell time per channel for active scanning -p N, --passive=N dwell time per channel for passive scanning -h N, --home=N dwell time for the home channel between channel scans -c L, --channels=L comma or space separated list of channels to scan scancache_clear clear the scan cache Start an escan. Default to an active scan across all channels for any SSID. Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated). Options: -s S, --ssid=S SSIDs to scan -t ST, --scan_type=ST [active|passive|prohibit] scan type --bss_type=BT [bss/infra|ibss/adhoc] bss type to scan -b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx -n N, --nprobes=N number of probes per scanned channel -a N, --active=N dwell time per channel for active scanning -p N, --passive=N dwell time per channel for passive scanning -h N, --home=N dwell time for the home channel between channel scans -c L, --channels=L comma or space separated list of channels to scan Abort an escan. Default to an active scan across all channels for any SSID. Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated). Options: -s S, --ssid=S SSIDs to scan -t ST, --scan_type=ST [active|passive|prohibit] scan type --bss_type=BT [bss/infra|ibss/adhoc] bss type to scan -b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx -n N, --nprobes=N number of probes per scanned channel -a N, --active=N dwell time per channel for active scanning -p N, --passive=N dwell time per channel for passive scanning -h N, --home=N dwell time for the home channel between channel scans -c L, --channels=L comma or space separated list of channels to scan Puts scan engine into passive mode regulatory Get/Set regulatory domain mode (802.11d). Driver must be down. spect Get/Set 802.11h Spectrum Management mode. 0 - Off 1 - Loose interpretation of 11h spec - may join non-11h APs 2 - Strict interpretation of 11h spec - may not join non-11h APs 3 - Disable 11h and enable 11d 4 - Loose interpretation of 11h+d spec - may join non-11h APs scanabort Abort a scan. scanresults Return results from last scan. Return results from last iscan. Specify a buflen (max 8188) to artificially limit the size of the results buffer. iscanresults [buflen] Print information about current network association. (also known as "status") Print information about current network association. (also known as "assoc") Disassociate from the current BSS/IBSS. chanlist Deprecated. Use channels. Return valid channels for the current settings. channels_in_country Return valid channels for the country specified. Arg 1 is the country abbreviation Arg 2 is the band(a or b) curpower Return current tx power settings. -q (quiet): estimated power only. Return current tx power per rate offset. Return tx power based on instant TSSI scansuppress Suppress all scans for testing. 0 - allow scans 1 - suppress scans evm Start an EVM test on the given channel, or stop EVM test. Arg 1 is channel number 1-14, or "off" or 0 to stop the test. Arg 2 is optional rate (1, 2, 5.5 or 11) Returns or sets the supported and basic rateset, (b) indicates basic With no args, returns the rateset. Args are rateset "default" | "all" | <arbitrary rateset> -m <arbitrary mcsset> default - driver defaults all - all rates are basic rates arbitrary rateset - list of rates arbitrary mcsset - list of mcs rates octets, each bit representing corresponding mcs List of rates are in Mbps and each rate is optionally followed by "(b)" or "b" for a Basic rate. Example: 1(b) 2b 5.5 11 At least one rate must be Basic for a legal rateset. roam_trigger Get or Set the roam trigger RSSI threshold: Get: roam_trigger [a|b] Set: roam_trigger <integer> [a|b|all] integer - 0: default 1: optimize bandwidth 2: optimize distance [-1, -99]: dBm trigger value roam_delta Set the roam candidate qualification delta. roam_delta [integer [, a/b]] roam_scan_period Set the roam candidate qualification delta. (integer) suprates Returns or sets the 11g override for the supported rateset With no args, returns the rateset. Args are a list of rates, or 0 or -1 to specify an empty rateset to clear the override. List of rates are in Mbps, example: 1 2 5.5 11 scan_channel_time Get/Set scan channel time scan_unassoc_time Get/Set unassociated scan channel dwell time scan_home_time Get/Set scan home channel dwell time scan_passive_time Get/Set passive scan channel dwell time scan_nprobes Get/Set scan parameter for number of probes to use per channel scanned prb_resp_timeout Get/Set probe response timeout channel_qa Get last channel quality measurment channel_qa_start Start a channel quality measurment Select Country Code for driver operational region For simple country setting: wl country <country> Where <country> is either a long name or country code from ISO 3166; for example "Germany" or "DE" For a specific built-in country definition: wl country <built-in> [<advertised-country>] Where <built-in> is a country country code followed by '/' and regulatory revision number. For example, "US/3". And where <advertised-country> is either a long name or country code from ISO 3166. If <advertised-country> is omitted, it will be the same as the built-in country code. Use 'wl country list [band(a or b)]' for the list of supported countries country_ie_override To set/get country ie autocountry_default Select Country Code for use with Auto Contry Discovery join Join a specified network SSID. Usage: join <ssid> [key <0-3>:xxxxx] [imode bss|ibss] [amode open|shared|openshared|wpa|wpapsk|wpa2|wpa2psk|wpanone] [options] Options: -b MAC, --bssid=MAC BSSID (xx:xx:xx:xx:xx:xx) to scan and join -c CL, --chanspecs=CL chanspecs (comma or space separated list) Set or get a configuration's SSID. wl ssid [-C num]|[--cfg=num] [<ssid>] If the configuration index 'num' is not given, configuraion #0 is assumed and setting will initiate an assoication attempt if in infrastructure mode, or join/creation of an IBSS if in IBSS mode, or creation of a BSS if in AP mode. Set or get the list of source MAC address matches. wl mac xx:xx:xx:xx:xx:xx [xx:xx:xx:xx:xx:xx ...] To Clear the list: wl mac none macmode Set the mode of the MAC list. 0 - Disable MAC address matching. 1 - Deny association to stations on the MAC list. 2 - Allow association to stations on the MAC list. Set or get the list of WDS member MAC addresses. Set using a space separated list of MAC addresses. wl wds xx:xx:xx:xx:xx:xx [xx:xx:xx:xx:xx:xx ...] lazywds Set or get "lazy" WDS mode (dynamically grant WDS membership to anyone). noise Get noise (moving average) right after tx in dBm fqacurcy Manufacturing test: set frequency accuracy mode. freqacuracy syntax is: fqacurcy <channel> Arg is channel number 1-14, or 0 to stop the test. crsuprs Manufacturing test: set carrier suppression mode. carriersuprs syntax is: crsuprs <channel> Arg is channel number 1-14, or 0 to stop the test. longtrain Manufacturing test: set longtraining mode. longtrain syntax is: longtrain <channel> Arg is A band channel number or 0 to stop the test. Returns or sets the current band auto - auto switch between available bands (default) a - force use of 802.11a band b - force use of 802.11b band Return the list of available 802.11 bands phylist Return the list of available phytypes shortslot Get current 11g Short Slot Timing mode. (0=long, 1=short) shortslot_override Get/Set 11g Short Slot Timing mode override. (-1=auto, 0=long, 1=short) shortslot_restrict Get/Set AP Restriction on associations for 11g Short Slot Timing capable STAs. 0 - Do not restrict association based on ShortSlot capability 1 - Restrict association to STAs with ShortSlot capability ignore_bcns AP only (G mode): Check for beacons without NONERP element(0=Examine beacons, 1=Ignore beacons) pktcnt Get the summary of good and bad packets. upgrade Upgrade the firmware on an embedded device gmode Set the 54g Mode (LegacyB|Auto||GOnly|BDeferred|Performance|LRS) gmode_protection Get G protection mode. (0=disabled, 1=enabled) gmode_protection_control Get/Set 11g protection mode control alg.(0=always off, 1=monitor local association, 2=monitor overlapping BSS) gmode_protection_override Get/Set 11g protection mode override. (-1=auto, 0=disable, 1=enable) protection_control Get/Set protection mode control alg.(0=always off, 1=monitor local association, 2=monitor overlapping BSS) legacy_erp Get/Set 11g legacy ERP inclusion (0=disable, 1=enable) scb_timeout AP only: inactivity timeout value for authenticated stas assoclist AP only: Get the list of associated MAC addresses. isup Get driver operational state (0=down, 1=up) rssi Get the current RSSI val, for an AP you must specify the mac addr of the STA rssi_event Set parameters associated with RSSI event notification usage: wl rssi_event <rate_limit> <rssi_levels> rate_limit: Number of events posted to application will be limited to 1 per this rate limit. Set to 0 to disable rate limit. rssi_levels: Variable number of RSSI levels (maximum 8) in increasing order (e.g. -85 -70 -60). An event will be posted each time the RSSI of received beacons/packets crosses a level. fasttimer Deprecated. Use fast_timer. slowtimer Deprecated. Use slow_timer. glacialtimer Deprecated. Use glacial_timer. radar Enable/Disable radar radarargs Get/Set Radar parameters in order as version, npulses, ncontig, min_pw, max_pw, thresh0, thresh1, blank, fmdemodcfg, npulses_lp, min_pw_lp, max_pw_lp, min_fm_lp, max_span_lp, min_deltat, max_deltat, autocorr, st_level_time, t2_min, fra_pulse_err, npulses_fra, npulses_stg2, npulses_stg3, percal_mask, quant, min_burst_intv_lp, max_burst_intv_lp, nskip_rst_lp, max_pw_tol, feature_mask radarargs40 Get/Set Radar parameters for 40Mhz channel in order as version, npulses, ncontig, min_pw, max_pw, thresh0, thresh1, blank, fmdemodcfg, npulses_lp, min_pw_lp, max_pw_lp, min_fm_lp, max_span_lp, min_deltat, max_deltat, autocorr, st_level_time, t2_min, fra_pulse_err, npulses_fra, npulses_stg2, npulses_stg3, percal_mask, quant, min_burst_intv_lp, max_burst_intv_lp, nskip_rst_lp, max_pw_tol, feature_mask radarthrs Set Radar threshold for both 20 & 40MHz BW: order as thresh0_20_lo, thresh1_20_lo, thresh0_40_lo, thresh1_40_lo thresh0_20_hi, thresh1_20_hi, thresh0_40_hi, thresh1_40_hi dfs_status Get dfs status interference Get/Set interference mitigation mode. Choices are: 0 = none 1 = non wlan 2 = wlan manual 3 = wlan automatic 4 = wlan automatic with noise reduction interference_override Get/Set interference mitigation override. Choices are: 0 = no interference mitigation 1 = non wlan 2 = wlan manual 3 = wlan automatic 4 = wlan automatic with noise reduction -1 = remove override, override disabled frameburst Disable/Enable frameburst mode pwr_percent Get/Set power output percentage toe Enable/Disable tcpip offload feature Get/Set tcpip offload components toe_stats Display checksum offload statistics toe_stats_clear Clear checksum offload statistics arpoe Enable/Disable arp agent offload feature Get/Set arp offload components arp_peerage Get/Set age of the arp entry in minutes arp_table_clear Clear arp cache arp_hostip Add a host-ip address or display them arp_hostip_clear Clear all host-ip addresses arp_stats Display ARP offload statistics arp_stats_clear Clear ARP offload statistics wet Get/Set wireless ethernet bridging mode bi Get/Set the beacon period (bi=beacon interval) dtim Get/Set DTIM wds_remote_mac Get WDS link remote endpoint's MAC address wds_wpa_role_old Get WDS link local endpoint's WPA role (old) Get/Set WDS link local endpoint's WPA role authe_sta_list Get authenticated sta mac address list autho_sta_list Get authorized sta mac address list measure_req Send an 802.11h measurement request. Usage: wl measure_req <type> <target MAC addr> Measurement types are: TPC, Basic, CCA, RPI Target MAC addr format is xx:xx:xx:xx:xx:xx quiet Send an 802.11h quiet command. Usage: wl quiet <TBTTs until start>, <duration (in TUs)>, <offset (in TUs)> csa Send an 802.11h channel switch anouncement with chanspec: <mode> <count> <channel>[a,b][n][u,l] mode (0 or 1) count (0-254) channel number (0-224) band a=5G, b=2G bandwidth n=10, non for 20 & 40 ctl sideband, l=lower, u=upper, default no ctl sideband constraint Send an 802.11h Power Constraint IE Usage: wl constraint 1-255 db Request a radio measurement of type basic, cca, or rpi specify a series of measurement types each followed by options. example: wl rm_req cca -c 1 -d 50 cca -c 6 cca -c 11 Options: -t n numeric token id for measurement set or measurement -c n channel -d n duration in TUs (1024 us) -p parallel flag, measurement starts at the same time as previous Each measurement specified uses the same channel and duration as the previous unless a new channel or duration is specified. Get current radio measurement report Set/Get join target preferences. assoc_pref Set/Get association preference. Usage: wl assoc_pref [auto|a|b|g] wme Set WME (Wireless Multimedia Extensions) mode (0=off, 1=on, -1=auto) wme_ac wl wme_ac ap|sta [be|bk|vi|vo [ecwmax|ecwmin|txop|aifsn|acm <value>] ...] wme_apsd Set APSD (Automatic Power Save Delivery) mode on AP (0=off, 1=on) wme_apsd_sta Set APSD parameters on STA. Driver must be down. Usage: wl wme_apsd_sta <max_sp_len> <be> <bk> <vi> <vo> <max_sp_len>: number of frames per USP: 0 (all), 2, 4, or 6 <xx>: value 0 to disable, 1 to enable U-APSD per AC Set AC queue discard policy. Usage: wl wme_dp <be> <bk> <vi> <vo> <xx>: value 0 for newest-first, 1 for oldest-first wme_counters print WMM stats wme_clear_counters clear WMM counters wl wme_tx_params [be|bk|vi|vo [short|sfb|long|lfb|max_rate <value>] ...] wl wme_maxbw_params [be|bk|vi|vo <value> ....] Set Lifetime parameter (milliseconds) for each ac. wl lifetime be|bk|vi|vo [<value>] reinit Reinitialize device wl sta_info <xx:xx:xx:xx:xx:xx> driver capabilities malloc_dump Deprecated. Folded under 'wl dump malloc channel info add_ie Add a vendor proprietary IE to 802.11 management packets Usage: wl add_ie <pktflag> length OUI hexdata <pktflag>: Bit 0 - Beacons Bit 1 - Probe Rsp Bit 2 - Assoc/Reassoc Rsp Bit 3 - Auth Rsp Bit 4 - Probe Req Bit 5 - Assoc/Reassoc Req Example: wl add_ie 3 10 00:90:4C 0101050c121a03 to add this IE to beacons and probe responses del_ie Delete a vendor proprietary IE from 802.11 management packets Usage: wl del_ie <pktflag> length OUI hexdata <pktflag>: Bit 0 - Beacons Bit 1 - Probe Rsp Bit 2 - Assoc/Reassoc Rsp Bit 3 - Auth Rsp Bit 4 - Probe Req Bit 5 - Assoc/Reassoc Req Example: wl del_ie 3 10 00:90:4C 0101050c121a03 list_ie Dump the list of vendor proprietary IEs rand Get a 2-byte Random Number from the MAC's PRNG Usage: wl rand otpw Write an srom image to on-chip otp Usage: wl otpw file nvotpw Write nvram to on-chip otp Usage: wl nvotpw file errorstring freqtrack Set Frequency Tracking Mode (0=Auto, 1=On, 2=OFF) eventing set/get 128-bit hex filter bitmask for MAC event reporting up to application layer event_msgs set/get 128-bit hex filter bitmask for MAC event reporting via packet indications Return driver counter values delta_stats_interval set/get the delta statistics interval in seconds (0 to disable) delta_stats get the delta statistics for the last interval assoc_info Returns the assoc req and resp information [STA only] autochannel auto channel selection: 1 to issue a channel scanning; 2 to set chanspec based on the channel scan result; without argument to only show the chanspec selected; ssid must set to null before this process, RF must be up csscantimer auto channel scan timer in minutes (0 to disable) closed hides the network from active scans, 0 or 1. 0 is open, 1 is hide pmkid_info Returns the pmkid table abminrate get/set afterburner minimum rate threshold set/get BSS enabled status: up/down closednet set/get BSS closed network attribute ap_isolate set/get AP isolation eap_restrict set/get EAP restriction diag testindex(1-interrupt, 2-loopback, 3-memory, 4-led); precede by 'wl down' and follow by 'wl up' reset_d11cnts reset 802.11 MIB counters staname get/set station name: Maximum name length is 15 bytes apname get AP name otpdump Dump raw otp otpstat Dump OTP status -r legacy rate (CCK, OFDM)-m mcs index-s stf mode (0=SISO,1=CDD,2=STBC(not supported),3=SDM)-w Override mcs only to support STA's with/without STBC capability mimo_txbw get/set mimo txbw (2=20Mhz(lower), 3=20Mhz upper, 4=40Mhz, 5=40Mhz dup<mcs32 only) add TSPEC, error if STA is not associated or WME is not enabled arg: TSPEC parameter input list delete TSPEC, error if STA is not associated or WME is not enabled arg: TSINFO for the target tspec cac_delts_ea delete TSPEC, error if STA is not associated or WME is not enabled arg1: Desired TSINFO for the target tspec arg2: Desired MAC address cac_tslist Get the list of TSINFO in driver eg. 'wl cac_tslist' get a list of TSINFO cac_tslist_ea Get the list of TSINFO for given STA in driver eg. 'wl cac_tslist_ea ea' get a list of TSINFO cac_tspec Get specific TSPEC with matching TSINFO eg. 'wl cac_tspec 0xaa 0xbb 0xcc' where 0xaa 0xbb & 0xcc are TSINFO octets cac_tspec_ea Get specific TSPEC for given STA with matching TSINFO eg. 'wl cac_tspec 0xaa 0xbb 0xcc xx:xx:xx:xx:xx:xx' where 0xaa 0xbb & 0xcc are TSINFO octets and xx is mac address phy_txpwrindex usage: (set) phy_txpwrindex core0_idx core1_idx core2_idx core3_idx (get) phy_txpwrindex, return format: core0_idx core1_idx core2_idx core3_idxSet/Get txpwrindex phy_test_tssi wl phy_test_tssi val phy_test_tssi_offs wl phy_test_tssi_offs val phy_rssiant wl phy_rssiant antindex(0-3) phy_rssi_ant Get RSSI per antenna (only gives RSSI of current antenna for SISO PHY) print papd eps table; Usage: wl lpphy_papdepstbl rifs set/get the rifs status; usage: wl rifs <1/0> (On/Off) rifs_advert set/get the rifs mode advertisement status; usage: wl rifs_advert <-1/0> (Auto/Off) phy_rxiqest Get phy RX IQ noise in dBm: -s # of samples (2^n) -a antenna select, 0,1 or 3 -r resolution select, 0 (coarse) or 1 (fine) -f lpf hpc override select, 0 (hpc unchanged) or 1 (overridden to lowest value) -g gain-correction select, 0 (disable) or 1 (enable) phy_txiqcc usage: phy_txiqcc [a b] Set/get the iqcc a, b values phy_txlocc usage: phy_txlocc [di dq ei eq fi fq] Set/get locc di dq ei eq fi fq values phytable usage: wl phytable table_id offset width_of_table_element [table_element] Set/get table element of a table with the given ID at the given offset Note that table width supplied should be 8 or 16 or 32 table ID, table offset can not be negative pavars Set/get temp PA parameters usage: wl down wl pavars pa2gw0a0=0x1 pa2gw1a0=0x2 pa2gw2a0=0x3 ... wl pavars wl up override the PA parameters after driver attach(srom read), before diver up These override values will be propogated to HW when driver goes up PA parameters in one band range (2g, 5gl, 5g, 5gh) must all present if one of them is specified in the command, otherwise it will be filled with 0 povars Set/get temp power offset usage: wl down wl povars cck2gpo=0x1 ofdm2gpo=0x2 mcs2gpo=0x3 ... wl povars wl up override the power offset after driver attach(srom read), before diver up These override values will be propogated to HW when driver goes up power offsets in one band range (2g, 5gl, 5g, 5gh) must all present if one of them is specified in the command, otherwise it will be filled with 0 cck(2g only), ofdm, and mcs(0-7) for NPHY are supported fem Set temp fem2g/5g value usage: wl fem (tssipos2g=0x1 extpagain2g=0x2 pdetrange2g=0x1 triso2g=0x1 antswctl2g=0) (tssipos5g=0x1 extpagain5g=0x2 pdetrange5g=0x1 triso5g=0x1 antswctl5g=0) Set temp ag0/1 value usage: wl antgain ag0=0x1 ag1=0x2 Set temp maxp2g(5g)a0(a1) value usage: wl maxpower maxp2ga0=0x1 maxp2ga1=0x2 maxp5ga0=0xff maxp5ga1=0xff maxp5gla0=0x3 maxp5gla1=0x4 maxp5gha0=0x5 maxp5gha1=0x6 phy_antsel get/set antenna configuration set: -1(AUTO), 0xAB(fixed antenna selection) where A and B is the antenna numbers used for RF chain 1 and 0 respectively query: <utx>[AUTO] <urx>[AUTO] <dtx>[AUTO] <drx>[AUTO] where utx = TX unicast antenna configuration urx = RX unicast antenna configuration dtx = TX default (non-unicast) antenna configuration drx = RX default (non-unicast) antenna configuration txcore Usage: wl txcore -k <CCK core mask> -o <OFDM core mask> -s <1..4> -c <core bitmap> -k CCK core mask -o OFDM core mask -s # of space-time-streams -c active core (bitmask) to be used when transmitting frames txcore_override Usage: wl txcore_override get the user override of txcore txchain_pwr_offset Usage: wl txchain_pwr_offset [qdBm offsets] Get/Set the current offsets for each core in qdBm (quarter dBm) Optional parameters HTPHY/(NPHY with NREV >= 7) are: -f File name to dump the sample buffer (default "sample_collect.dat") -t Trigger condition (default now) now, good_fcs, bad_fcs, bad_plcp, crs, crs_glitch, crs_deassert -b PreTrigger duration in us (default 10) -a PostTrigger duration in us (default 10) -m Sample collect mode (default 1) HTPHY: 0=adc, 1..3=adc+rssi, 4=gpio NPHY: 1=Dual-Core adc[9:2], 2=Core0 adc[9:0], 3=Core1 adc[9:0], gpio=gpio -g GPIO mux select (default 0) use only for gpio mode -d Downsample enable (default 0) use only for HTPHY -e BeDeaf enable (default 0) -i Timeout in units of 10us (default 1000) Optional parameters (NPHY with NREV < 7) are: -f File name to dump the sample buffer (binary format, default "sample_collect.dat") -u Sample collect duration in us (default 60) -c Cores to do sample collect, only if BW=40MHz (default both) For (NREV < 7), the NPHY buffer returned has the format: In 20MHz [(uint16)num_bytes, <I(core0), Q(core0), I(core1), Q(core1)>] In 40MHz [(uint16)num_bytes(core0), <I(core0), Q(core0)>, (uint16)num_bytes(core1), <I(core1), Q(core1)>] set/get the txfifo size; usage: wl txfifo_sz <fifonum> <size_in_bytes> rate_histo Get rate hostrogram start packet engine tx usage: wl pkteng_start <xx:xx:xx:xx:xx:xx> <tx|txwithack> [(async)|sync] [ipg] [len] [nframes] [src] start packet engine rx usage: wl pkteng_start <xx:xx:xx:xx:xx:xx> <rx|rxwithack> [(async)|sync] [rxframes] [rxtimeout] sync: synchronous mode ipg: inter packet gap in us len: packet length nframes: number of frames; 0 indicates continuous tx test src: source mac address rxframes: number of receive frames (sync mode only) rxtimeout: maximum timout in msec (sync mode only) stop packet engine; usage: wl pkteng_stop <tx|rx> pkteng_stats packet engine stats; usage: wl pkteng_stats wowl Enable/disable WOWL events 0 - Clear all events Bit 0 - Wakeup on Magic Packet Bit 1 - Wakeup on NetPattern (use 'wl wowl_pattern' to configure pattern) Bit 2 - Wakeup on loss-of-link due to Disassociation/Deauth Bit 3 - Wakeup on retrograde tsf Bit 4 - Wakeup on loss of beacon (use 'wl wowl_bcn_loss' to configure time) wowl_bcn_loss Set #of seconds of beacon loss for wakeup event usage: wowl_pattern [ [clr | [[ add | del ] offset mask value ]]] No options -- lists existing pattern list add -- Adds the pattern to the list del -- Removes a pattern from the list clr -- Clear current list offset -- Starting offset for the pattern mask -- Mask to be used for pattern. Bit i of mask => byte i of the pattern value -- Value of the pattern usage: wowl_wakeind [clear] Shows last system wakeup event indications from PCI and D11 cores clear - Clear the indications usage: wowl_status [clear] Shows last system wakeup setting Send a wakeup frame to wakup a sleeping STA in WAKE mode Usage: wl wowl_pkt <len> <dst ea | bcast | ucast <STA ea>>[ magic [<STA ea>] | net <offset> <pattern>] e.g. To send bcast magic frame -- wl wowl_pkt 102 bcast magic 00:90:4c:AA:BB:CC To send ucast magic frame -- wl wowl_pkt 102 ucast 00:90:4c:aa:bb:cc magic To send a frame with L2 unicast - wl wowl_pkt 102 00:90:4c:aa:bb:cc net 0 0x00904caabbcc NOTE: offset for netpattern frame starts from "Dest EA" of ethernet frame.So dest ea will be used only when offset is >= 6 wme_apsd_trigger Set Periodic APSD Trigger Frame Timer timeout in ms (0=off) wme_autotrigger Enable/Disable sending of APSD Trigger frame when all ac are delivery enabled Initiate a (re)association request. Usage: wl reassoc <bssid> [options] Options: -c CL, --chanspecs=CL chanspecs (comma or space separated list) send_nulldata Sed a null frame to the specified hw address btc_params g/set BT Coex parameters btc_flags g/set BT Coex flags obss_scan_params set/get Overlapping BSS scan parameters Usage: wl obss_scan a b c d e ...; where a-Passive Dwell, {5-1000TU}, default = 100 b-Active Dwell, {10-1000TU}, default = 20 c-Width Trigger Scan Interval, {10-900sec}, default = 300 d-Passive Total per Channel, {200-10000TU}, default = 200 e-Active Total per Channel, {20-1000TU}, default = 20 f-Channel Transition Delay Factor, {5-100}, default = 5 g-Activity Threshold, {0-100%}, default = 25 Send specified "keep-alive" packet periodically. Usage: wl keep_alive <period> <packet> period: Re-transmission period in milli-seconds. 0 to disable packet transmits. packet: Hex packet contents to transmit. The packet contents should include the entire ethernet packet (ethernet header, IP header, UDP header, and UDP payload) specified in network byte order. e.g. Send keep alive packet every 30 seconds: wl keep_alive 30000 0x0014a54b164f000f66f45b7e08004500001e000040004011c52a0a8830700a88302513c413c4000a00000a0d srchmem g/set ucode srch engine memory Install a packet filter. Usage: wl pkt_filter_add <id> <polarity> <type> <offset> <bitmask> <pattern> id: Integer. User specified id. type: 0 (Pattern matching filter). offset: Integer. Offset within received packets to start matching. polarity: Set to 1 to negate match result. 0 is default. bitmask: Hex bitmask that indicates which bits of 'pattern' to match. Must be same size as 'pattern'. Bit 0 of bitmask corresponds to bit 0 of pattern, etc. If bit N of bitmask is 0, then do *not* match bit N of the pattern with the received payload. If bit N of bitmask is 1, then perform match. pattern: Hex pattern to match. pkt_filter_clear_stats Clear packet filter statistic counter values. Usage: wl pkt_filter_clear_stats <id> pkt_filter_enable Enable/disable a packet filter. Usage: wl pkt_filter_enable <id> <0|1> pkt_filter_list List installed packet filters. Usage: wl pkt_filter_list [val] val: 0 (disabled filters) 1 (enabled filters) pkt_filter_mode Set packet filter match action. Usage: wl pkt_filter_mode <value> value: 1 - Forward packet on match, discard on non-match (default). 0 - Discard packet on match, forward on non-match. pkt_filter_delete Uninstall a packet filter. Usage: wl pkt_filter_delete <id> pkt_filter_stats Retrieve packet filter statistic counter values. Usage: wl pkt_filter_stats <id> Initiates command batching sequence. Subsequent IOCTLs will be queued until seq_stop is received. Defines the end of command batching sequence. Queued IOCTLs will be executed. seq_delay Driver should spin for the indicated amount of time. It is only valid within the context of batched commands. seq_error_index Used to retrieve the index (starting at 1) of the command that failed within a batch bmac_reboot Reboot BMAC txmcsset get Transmit MCS rateset for 11N device rxmcsset get Receive MCS rateset for 11N device mimo_ss_stf get/set SS STF mode. Usage: wl mimo_ss_stf <value> <-b a | b> value: 0 - SISO; 1 - CDD -b(band): a - 5G; b - 2.4G get external assert logs Usage: wl assertlog assert_type set/get the asset_bypass flag; usage: wl assert_type <1/0> (On/Off) ledbh set/get led behavior Usage: wl ledbh [0-3] [0-15] obss_coex_action send OBSS 20/40 Coexistence Mangement Action Frame Usage: wl obss_coex_action -i <1/0> -w <1/0> -c <channel list> -i: 40MHz intolerate bit; -w: 20MHz width Req bit; -c: channel list, 1 - 14 At least one option must be provided chanim_state get channel interference state Usage: wl chanim_state channel Valid channels: 1 - 14 returns: 0 - Acceptable; 1 - Severe chanim_mode get/set channel interference measure (chanim) mode Usage: wl chanim_mode <value> value: 0 - disabled; 1 - detection only; 2 - detection and avoidance led_blink_sync set/get led_blink_sync Usage: wl led_blink_sync [0-3] [0/1] cca_get_stats Usage: wl cca_stats [-c channel] [-s num seconds][-a] -c channel: Optional. specify channel. 0 = All channels. Default = current channel -s num_seconds: Optional. Default = 10, Max = 60 -i: list individual measurements in addition to the averages -curband: Only recommend channels on current band itfr_get_stats get interference source information itfr_enab get/set STA interference detection mode(STA only) 0 - disable 1 - enable maual detection 2 - enable auto detection itfr_detect issue an interference detection request get/clear selected management frame (smf) stats wl smfstats [-C num]|[--cfg=num] [auth]|[assoc]|[reassoc]|[clear] clear - to clear the stats manfinfo show chip package info in OTP send 11k neighbor report measurement request Usage: wl 11k_nbr_req <da> [ssid] pm_dur Retrieve accumulated PM duration information (GET) or clear accumulator (SET) Usage: wl pm_dur <any-number-to-clear> mpc_dur Retrieve accumulated MPC duration information in ms (GET) or clear accumulator (SET) Usage: wl mpc_dur <any-number-to-clear> chanim_acs_record get the auto channel scan record. Usage: wl acs_record enable or disable dongle watchdog timer Usage: wl dngl_wd <on/off>(to turn on\off) <exptime in sec> set/get tsf register Usage: wl tsf [<high> <low>] tpc_mode Enable/disable AP TPC. Usage: wl tpc_mode <mode> 0 - disable, 1 - BSS power control, 2 - AP power control, 3 - Both (1) and (2) tpc_period Set AP TPC periodicity in secs. Usage: wl tpc_period <secs> tpc_lm Get current link margins. mfp_config Config PMF capability usage: wl mfp 0/disable, 1/capable, 2/requred Config SHA256 capability usage: wl sha256 0/disable, 1/enable Send a sa query req/resp to a peer usage: wl mfp_sa_query flag action id send bogus disassoc Usage: wl mfp_disassoc send bogus deauth Usage: wl mfp_dedauth send assoc Usage: wl mfp_assoc send auth Usage: wl mfp_auth send reassoc Usage: wl mfp_reassoc monitor_lq Start/Stop monitoring link quality metrics - RSSI and SNR Usage: wl monitor_lq <0: turn off / 1: turn on Returns averaged link quality metrics - RSSI and SNR values Set probing parameters for inactive clients. <timout in seconds> <activity_time in seconds> <max number of probes> rpmt rpmt <pm1-to> <pm0-to> spatial_policy set/get spatial_policy Usage: wl spatial_policy <-1: auto / 0: turn off / 1: turn on> to control individual band/sub-band use wl spatial_policy a b c d e where a is 2.4G band setting where b is 5G lower band setting where c is 5G middle band setting where d is 5G high band setting where e is 5G upper band setting ratetbl_ppr Usage: For get: wl ratetbl_ppr For set: wl ratetbl_ppr <rate> <ppr> var unrecognized name, type -h for help AFGHANISTAN AF ALBANIA AL ALGERIA DZ AMERICAN SAMOA AS ANDORRA AD ANGOLA AO ANGUILLA AI ANTARCTICA AQ ANTIGUA AND BARBUDA AG ARGENTINA ARMENIA AM ARUBA AW ASCENSION ISLAND AUSTRALIA AU AUSTRIA AZERBAIJAN AZ BAHAMAS BS BAHRAIN BH BANGLADESH BD BARBADOS BB BELARUS BY BELGIUM BE BELIZE BZ BENIN BJ BERMUDA BM BHUTAN BT BOLIVIA BO BOSNIA AND HERZEGOVINA BA BOTSWANA BW BOUVET ISLAND BV BRAZIL BR BRITISH INDIAN OCEAN TERRITORY IO BRUNEI DARUSSALAM BN BULGARIA BG BURKINA FASO BF BURUNDI BI CAMBODIA KH CAMEROON CM CANADA CAPE VERDE CV CAYMAN ISLANDS KY CENTRAL AFRICAN REPUBLIC CF CHAD TD CHILE CL CN CHRISTMAS ISLAND CX CLIPPERTON ISLAND CP COCOS (KEELING) ISLANDS CC COLOMBIA COMOROS KM CONGO CG CONGO, THE DEMOCRATIC REPUBLIC OF THE CD COOK ISLANDS CK COSTA RICA CR COTE D'IVOIRE CI CROATIA HR CUBA CU CYPRUS CY CZECH REPUBLIC CZ DENMARK DK DJIBOUTI DJ DOMINICA DM DOMINICAN REPUBLIC DO ECUADOR EC EGYPT EG EL SALVADOR SV EQUATORIAL GUINEA GQ ERITREA ER ESTONIA EE ETHIOPIA ET FALKLAND ISLANDS (MALVINAS) FK FAROE ISLANDS FIJI FJ FINLAND FI FRANCE FR FRENCH GUIANA GF FRENCH POLYNESIA PF FRENCH SOUTHERN TERRITORIES TF GABON GA GAMBIA GM GEORGIA GE GERMANY GHANA GH GIBRALTAR GI GREECE GR GREENLAND GL GRENADA GD GUADELOUPE GP GUAM GU GUATEMALA GT GUERNSEY GG GUINEA GN GUINEA-BISSAU GW GUYANA GY HAITI HT HEARD ISLAND AND MCDONALD ISLANDS HM HOLY SEE (VATICAN CITY STATE) VA HONDURAS HN HONG KONG HK HUNGARY HU ICELAND IS INDIA IN INDONESIA ID IRAN, ISLAMIC REPUBLIC OF IR IRAQ IQ IRELAND IE ISRAEL ITALY JAMAICA JM JAPAN JP JERSEY JE JORDAN JO KAZAKHSTAN KZ KENYA KE KIRIBATI KI KOREA, DEMOCRATIC PEOPLE'S REPUBLIC OF KP KOREA, REPUBLIC OF KR KUWAIT KW KYRGYZSTAN KG LAO PEOPLE'S DEMOCRATIC REPUBLIC LATVIA LV LEBANON LB LESOTHO LIBERIA LR LIBYAN ARAB JAMAHIRIYA LY LIECHTENSTEIN LI LITHUANIA LT LUXEMBOURG MACAO MO MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF MK MADAGASCAR MG MALAWI MW MALAYSIA MY MALDIVES MV MALI ML MALTA MT MAN, ISLE OF MARSHALL ISLANDS MH MARTINIQUE MQ MAURITANIA MR MAURITIUS MU MAYOTTE YT MEXICO MX MICRONESIA, FEDERATED STATES OF FM MOLDOVA, REPUBLIC OF MD MONACO MC MONGOLIA MN MONTENEGRO ME MONTSERRAT MS MOROCCO MOZAMBIQUE MZ MYANMAR MM NAMIBIA NAURU NR NEPAL NP NETHERLANDS NL NETHERLANDS ANTILLES NEW CALEDONIA NC NEW ZEALAND NZ NICARAGUA NI NIGER NE NIGERIA NG NIUE NU NORFOLK ISLAND NF NORTHERN MARIANA ISLANDS MP NORWAY OMAN PAKISTAN PK PALAU PW PALESTINIAN TERRITORY, OCCUPIED PS PANAMA PA PAPUA NEW GUINEA PG PARAGUAY PY PERU PHILIPPINES PH PITCAIRN PN POLAND PL PORTUGAL PT PUERTO RICO PR QATAR QA REUNION RE ROMANIA RUSSIAN FEDERATION RU RWANDA RW SAINT HELENA SAINT KITTS AND NEVIS KN SAINT LUCIA LC SAINT PIERRE AND MIQUELON SAINT VINCENT AND THE GRENADINES VC SAMOA WS SAN MARINO SM SAO TOME AND PRINCIPE ST SAUDI ARABIA SA SENEGAL SN SERBIA RS SEYCHELLES SC SIERRA LEONE SL SINGAPORE SG SLOVAKIA SK SLOVENIA SI SOLOMON ISLANDS SB SOMALIA SO SOUTH AFRICA ZA SOUTH GEORGIA AND THE SOUTH SANDWICH ISLANDS GS SPAIN SRI LANKA LK SUDAN SURINAME SR SVALBARD AND JAN MAYEN SJ SWAZILAND SZ SWEDEN SWITZERLAND CH SYRIAN ARAB REPUBLIC SY TAIWAN, PROVINCE OF CHINA TW TAJIKISTAN TJ TANZANIA, UNITED REPUBLIC OF TZ THAILAND TH TIMOR-LESTE (EAST TIMOR) TL TOGO TG TOKELAU TK TONGA TO TRINIDAD AND TOBAGO TT TRISTAN DA CUNHA TUNISIA TN TURKEY TR TURKMENISTAN TM TURKS AND CAICOS ISLANDS TC TUVALU TV UGANDA UG UKRAINE UA UNITED ARAB EMIRATES AE UNITED KINGDOM GB UNITED STATES UNITED STATES MINOR OUTLYING ISLANDS UM URUGUAY UY UZBEKISTAN UZ VANUATU VU VENEZUELA VE VIET NAM VN VIRGIN ISLANDS, BRITISH VG VIRGIN ISLANDS, U.S. VI WALLIS AND FUTUNA WF WESTERN SAHARA EH YEMEN YE YUGOSLAVIA YU ZAMBIA ZM ZIMBABWE ZW RADAR CHANNELS RDR ALL CHANNELS ALL None IOCTL CHANIM TIMER BTA disassoc_tx disassoc_rx deauth_tx deauth_rx Status_code Reason_code wireless phone wireless video camera microwave oven wireless baby monitor bluetooth device wireless video camera or baby monitor bluetooth or baby monitor video camera or phone unidentified No error Preferred band Dwell Duration too low Channel prefs Interference too high Only 1 channel inoput mcs2gpo0 mcs2gpo1 mcs2gpo2 mcs2gpo3 mcs2gpo4 mcs2gpo5 mcs2gpo6 mcs2gpo7 mcs5glpo0 mcs5glpo1 mcs5glpo2 mcs5glpo3 mcs5glpo4 mcs5glpo5 mcs5glpo6 mcs5glpo7 mcs5gpo0 mcs5gpo1 mcs5gpo2 mcs5gpo3 mcs5gpo4 mcs5gpo5 mcs5gpo6 mcs5gpo7 mcs5ghpo0 mcs5ghpo1 mcs5ghpo2 mcs5ghpo3 mcs5ghpo4 mcs5ghpo5 mcs5ghpo6 mcs5ghpo7 pa2gw0a0 pa2gw1a0 pa2gw2a0 pa2gw0a1 pa2gw1a1 pa2gw2a1 pa2gw0a2 pa2gw1a2 pa2gw2a2 pa5glw0a0 pa5glw1a0 pa5glw2a0 pa5glw0a1 pa5glw1a1 pa5glw2a1 pa5glw0a2 pa5glw1a2 pa5glw2a2 pa5gw0a0 pa5gw1a0 pa5gw2a0 pa5gw0a1 pa5gw1a1 pa5gw2a1 pa5gw0a2 pa5gw1a2 pa5gw2a2 pa5ghw0a0 pa5ghw1a0 pa5ghw2a0 pa5ghw0a1 pa5ghw1a1 pa5ghw2a1 pa5ghw0a2 pa5ghw1a2 pa5ghw2a2 pa0b0 pa0b1 pa0b2 pa1lob0 pa1lob1 pa1lob2 pa1b0 pa1b1 pa1b2 pa1hib0 pa1hib1 pa1hib2 tx_csum_ol rx_csum_ol agent snoop host_auto_reply peer_auto_reply IDLE PRE-ISM Channel Availability Check(CAC) In-Service Monitoring(ISM) Channel Switching Announcement(CSA) POST-ISM Channel Availability Check PRE-ISM Ouf Of Channels(OOC) POST-ISM Out Of Channels(OOC) WPA-NONE WPA-802.1x WPA-PSK WPA2-802.1x WPA2-PSK disabled mic_error icv_error act_error disassoc_error deauth_error err trace inform tmp cal thermal prhdrs prpkt inf oid as prusr ps dual wsec_dump log nrssi loft mpc apsta dfs ba cac amsdu ampdu ffpld dpt coex rtdc proto chanim itfr devid boardrev boardflags boardflags2 boardtype boardnum regrev ledbh0 ledbh1 ledbh2 ledbh3 pa0b0 pa0b1 pa0itssit pa0maxpwr aa2g aa5g ag2 pa1b0 pa1b1 pa1lob0 pa1lob1 pa1hib0 pa1hib1 pa1itssit pa1maxpwr pa1lomaxpwr pa1himaxpwr tri2g tri5g tri5gl rxpo2g rxpo5g rxchain antswitch txpid2ga0 txpid2ga1 txpid2ga2 txpid2ga3 txpid5ga0 txpid5ga1 txpid5ga2 txpid5ga3 txpid5gla0 txpid5gla1 txpid5gla2 txpid5gla3 txpid5gha0 txpid5gha1 txpid5gha2 txpid5gha3 il0macaddr et1macaddr leddc tempthresh tempoffset rawtempsense measpower tempsense_slope tempcorrx tempsense_option freqoffset_corr iqcal_swp_dis hw_iqcal_en elna2g elna5g phycal_tempdelta temps_period temps_hysteresis measpower1 measpower2 mcs2gpo0 mcs2gpo1 mcs2gpo2 mcs2gpo3 mcs2gpo4 mcs2gpo5 mcs2gpo6 mcs2gpo7 mcs5gpo0 mcs5gpo1 mcs5gpo2 mcs5gpo3 mcs5gpo4 mcs5gpo5 mcs5gpo6 mcs5gpo7 mcs5glpo0 mcs5glpo1 mcs5glpo2 mcs5glpo3 mcs5glpo4 mcs5glpo5 mcs5glpo6 mcs5glpo7 mcs5ghpo0 mcs5ghpo1 mcs5ghpo2 mcs5ghpo3 mcs5ghpo4 mcs5ghpo5 mcs5ghpo6 mcs5ghpo7 cddpo stbcpo bw40po bwduppo cckbw202gpo cckbw20ul2gpo legofdmbw202gpo legofdmbw20ul2gpo legofdmbw205glpo legofdmbw20ul5glpo legofdmbw205gmpo legofdmbw20ul5gmpo legofdmbw205ghpo legofdmbw20ul5ghpo mcsbw202gpo mcsbw20ul2gpo mcsbw402gpo mcsbw205glpo mcsbw20ul5glpo mcsbw405glpo mcsbw205gmpo mcsbw20ul5gmpo mcsbw405gmpo mcsbw205ghpo mcsbw20ul5ghpo mcsbw405ghpo mcs32po legofdm40duppo pcieingress_war rxgainerr2ga0 rxgainerr2ga1 rxgainerr2ga2 rxgainerr5gla0 rxgainerr5gla1 rxgainerr5gla2 rxgainerr5gma0 rxgainerr5gma1 rxgainerr5gma2 rxgainerr5gha0 rxgainerr5gha1 rxgainerr5gha2 rxgainerr5gua0 rxgainerr5gua1 rxgainerr5gua2 maxp2ga itt2ga itt5ga pa2gw0a pa2gw1a pa2gw2a pa2gw3a maxp5ga maxp5gha maxp5gla pa5gw0a pa5gw1a pa5gw2a pa5gw3a pa5glw0a pa5glw1a pa5glw2a pa5glw3a pa5ghw0a pa5ghw1a pa5ghw2a pa5ghw3a smanf sproductname 2manfid 2prodid 1sromrev 2vendid 2devid 2chiprev 2subvendid 2subdevid 2boardrev 2pa0b0 2pa0b1 2pa0b2 1pa0itssit 1pa0maxpwr 1opo 1aa2g 1aa5g 1aa0 1aa1 1ag0 1ag1 1ag2 1ag3 4boardflags 4boardflags2 1ledbh0 1ledbh1 1ledbh2 1ledbh3 2ccode 1cctl 2cckpo 4ofdmpo 2rdlid 0rssismf2g 0rssismc2g 0rssisav2g 0bxa2g 0rssismf5g 0rssismc5g 0rssisav5g 0bxa5g 4xtalfreq 1tri2g 1tri5gl 1tri5g 1tri5gh 1rxpo2g 1rxpo5g 2boardnum 6macaddr 2rdlsn 2boardtype 2leddc 1rdlndis 1txchain 1rxchain 2antswitch 1regrev 0antswctl2g, 0triso2g, 0pdetrange2g, 0extpagain2g, 0tssipos2g0antswctl5g, 0triso5g, 0pdetrange5g, 0extpagain5g, 0tssipos5g 1maxp2ga0 1itt2ga0 2pa2gw0a0 2pa2gw1a0 2pa2gw2a0 1maxp5ga0 1itt5ga0 1maxp5gha0 1maxp5gla0 2pa5gw0a0 2pa5gw1a0 2pa5gw2a0 2pa5glw0a0 2pa5glw1a0 2pa5glw2a0 2pa5ghw0a0 2pa5ghw1a0 2pa5ghw2a0 1maxp2ga1 1itt2ga1 2pa2gw0a1 2pa2gw1a1 2pa2gw2a1 1maxp5ga1 1itt5ga1 1maxp5gha1 1maxp5gla1 2pa5gw0a1 2pa5gw1a1 2pa5gw2a1 2pa5glw0a1 2pa5glw1a1 2pa5glw2a1 2pa5ghw0a1 2pa5ghw1a1 2pa5ghw2a1 2cck2gpo 4ofdm2gpo 4ofdm5gpo 4ofdm5glpo 4ofdm5ghpo 2mcs2gpo0 2mcs2gpo1 2mcs2gpo2 2mcs2gpo3 2mcs2gpo4 2mcs2gpo5 2mcs2gpo6 2mcs2gpo7 2mcs5gpo0 2mcs5gpo1 2mcs5gpo2 2mcs5gpo3 2mcs5gpo4 2mcs5gpo5 2mcs5gpo6 2mcs5gpo7 2mcs5glpo0 2mcs5glpo1 2mcs5glpo2 2mcs5glpo3 2mcs5glpo4 2mcs5glpo5 2mcs5glpo6 2mcs5glpo7 2mcs5ghpo0 2mcs5ghpo1 2mcs5ghpo2 2mcs5ghpo3 2mcs5ghpo4 2mcs5ghpo5 2mcs5ghpo6 2mcs5ghpo7 1cckdigfilttype 2cddpo 2stbcpo 2bw40po 2bwduppo 1rdlrwu 1wpsgpio 1wpsled 1usbfs 4customvar1 4ofdm5gpo 4ofdm5glpo 4ofdm5ghpo 2usbepnum 2cckbw202gpo 2cckbw20ul2gpo 4legofdmbw202gpo 4legofdmbw20ul2gp 4legofdmbw205glpo 4legofdmbw20ul5glpo 4legofdmbw205gmpo 4legofdmbw20ul5gmpo 4legofdmbw205ghpo 4legofdmbw20ul5ghpo 4mcsbw202gpo 4mcsbw20ul2gpo 4mcsbw402gpo 4mcsbw205glpo 4mcsbw20ul5glpo 4mcsbw405glpo 4mcsbw205gmpo 4mcsbw20ul5gmpo 4mcsbw405gmpo 4mcsbw205ghpo 4mcsbw20ul5ghpo 4mcsbw405ghpo 2mcs32po 2legofdm40duppo 1tempthresh 1periodhyst 16uuid P j j j j pj g 4m m l l l l P } L} L} L} L} } L} x} } L} L} } L} L} L} L} L} L} L} L} L} } L} x} L} L} L} } L} x} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} L} } L} x} l @ d 8 d 8 \ 0 h H ( | H @ 4 ( , ` 0 b b b b b b Authentication_Request Association_Request Reassociation_Request Disassociation_Request_TX Disassociation_Request_RX Deauthentication_Request_TX Deauthentication_Request_RX AC_BE AC_BK AC_VI AC_VO K " $ 'a) +m.-1 4-7r: = AwE I M RsW \ b g n t { | ` x l q v { $ < ( P , d 0 x 4 8 < @ d | h l p t x | 0 D q 8 L ` t socket wl_get_dev_type wl /proc/net/dev > exit Give shell command Interface name change not allowed within --interactive %s: Unrecognized command "%s", type -h for help %s : wl driver adapter not found Enter the shell command, e.g. ls(Linux) or dir(Win CE) %s: wl driver adapter not found --interactive --indongle --vista --socket --serial --dongle --wifi could not parse as an ethternet MAC address Retry again ERR %c%03x %x %d.%d.%d.%d %s: %04d: WEP1 AES_CCM AES_OCB_MSDU AES_OCB_MPDU NALGUNDEF ((((( AAAAAA BBBBBB K " $ 'a) +m.-1 4-7r: = AwE I M RsW \ b g n t { | ` x 0 w,a Q m jp5 c d 2 y +L | ~ - d jHq A } mQ V l kdz b e O\ l cc= n;^ iL A` rqg <G K k 5l B @ l 2u\ E Y= 0 &: Q Q a !# V ( _ $ |o/ LhX a =-f A v q * q 3 x4 j-=m ld \c Qkkbal 0e N b l{ W eP | bI- | eL Xa M Q :t 0 A J =m j iC n4F g ` s- D 3_L | <q P A ' % hW o f a ^ )" = Y .;\ l t9G w & s c ;d >jm Zjz ' }D h i]Wb ge q6l knv + Zz J go C ` ~ 8R O g gW ?K6 H + L J 6`z A ` U g n1y iF a f o%6 hR w G "/& U ; ( Z + j \ 1 , [ d & c ju m ?6 g r W J z + {8 |! B hn [& w owG Z pj ; f\ e i b kaE l x T N 9a&g ` MGiI wn>Jj Z f @ ; 7S  G 0 0 S $ 6 )W T g #.zf Ja h] +o*7 Z - # 2$F W6e tH Z l ~ 3 " V,G u>d @ R d v ! 0 &g v4D UJ X n | 1 w.f T<E B P f t B S a p 2' 6L ^ h z R C q ` ( 7:& D V ` r c r @ Q"% 40 N \ j x s b P A 5*$ 8 F T b p , > @ R+ :dN _vm | $ 6 H ;Z* ^lO }~l . < B) 8P fo ~tL ] & 4 9J( X nn \|M ( : DJ [Vi x` r/ > 2 ZLK y^h h ?z. * 8 Fk zTH Yb- <p " 0 {Nj X\I =j, x N% kJ o ! c- F )g B  1Z 5 { ^ R 9w V s= G ,b C f( j $O n K v8 S <r W [0 ~_ z 4 \ y7 X 3} ? q Tu ;P #m H i' L @ e + D/ aU p > Q: t 6x ] |2 Y * d A` .E I l" M &h %02x:%02x:%02x:%02x:%02x:%02x %d%s%s%s Usage: wl/dhd [--linuxdut/linux] [--debug] [--serial port no] [--ReadTimeout n] [--interactive] [--clientbatch] --linuxdut/linux removes the WLC_OID_BASE when sending the IOCTL command --debug prints out tx packets sending down the serial line, and other debug info --serial enables the remoteWL serial port number --interactive enables using WL in interactive mode --clientbatch enables command batchinng on the client, the default is batching on driver Usage: wl/dhd --dongle <Device Name> <command> <Device Name> COM1/COM2 (WinXP) or /dev/ttyS0 or /dev/ttyS1 (Linux) <command> - wl, shell or dhd command Depending on the client you are using(wl or dhd) shell command usage: sh <command> Usage: wl/dhd --socket <IP ADDRESS> <PORT> <IPADDRESS> IP address of server machine <PORT> Port no of server Usage: wl/dhd --wifi <MAC Address> <command> <MAC Address> MAC Address rem_ptr->msg.len=%d rem_ptr->data_len=%d data_len is:%d No of frames=%d Malloc failed for serial fragmented framelocal result Total bytes=%d Frame (Reverse):%d query_info_fe: Reading CDC header failed query_info_fe: Send command failed query_info_fe: Reading CDC header failed query_info_fe: needed size(%d) > actualsize(%ld) query_info_fe: No results! rwl_setinformation_fe: Unknown remote_type:%d rwl_queryinformation_fe: Unknownremote_type %d Mem alloc fails for shell cmd buffer shell_info_fe: Send command failed kill shell_info_fe: Receiving CDC header failed Mem alloc fails for shell response buffer shell_info_fe: No results! shell_info_fe:Receiving CDC header failed sup_wpa legacylink xlist remote_CDC_rx: remote data len (%d) > msg len (%d) Unknown Transport Type remote_CDC_tx: data_len (%d) > buf_len (%d) %s: missing " = " in long param "%s" %s: missing value after " = " in long param "%s" %s: only single char options, error on param "%s" %s: missing value parameter after "%s"
XGI D x A \D \D @ \D D rC \D 6D rC ]D PbD B @]D ]D (nC ]D $^D rC ,^D \^D rC d^D oD (C % & t^D TwD A ^D XD xVC P ^D $_D l A O ,_D P_D xVC P X_D XD xVC O _D \D $yC _D _D sC _D D A `D VD ,B XaD VD ?C aD VD ?C O aD VD ?C O P aD aD @TA bD D LA 4bD (D A TbD bD TKA bD D TKA bD bD X @ b bD bD lSA bD LVD 4C cD T5D NB pcD cD (nC U V cD dD (nC W X (dD ldD (nC tdD dD (nC k l dD $eD @7@ ,eD HeD @7@ LeD heD (nC peD eD (nC eD eD (nC eD eD (nC ! " eD ,gD JB ,fD 4gD JB <gD LhD 2C ThD hD 2C hD iD 2C iD |jD 2C jD C (nC lkD 8#D (nC u v kD C C kD kD A lD D -C lD C @ 4mD x D ` A LmD D @?B mD oD @?B 4oD oD fA oD pD /B pD 8pD 1B @pD 4qD (nC @qD pqD 0fA |qD qD (nC qD qD B qD |rD HdC ^ _ rD lZD HdC ` a rD sD HdC sD sD HdC sD tD _C e f tD |tD (nC c d tD 6D WB tD 4uD $ A <uD PuD B \uD uD L B uD ID B uD HD | B uD HD P B vD PHD $ B \vD <HD B vD (HD B wD HwD B \wD HD B twD GD B wD $GD B xD FD | B 8xD TxD VA `xD TGD B xD xD (nC ? @ yD yD (nC = > yD LzD d+C # $ TzD zD (nC ' zD zD 'C ) zD zD IB {D 0{D | C <{D SD C - \{D SD @ C - ,}D d}D A , l}D }D ~A }D }D C }D P~D (nC h~D ~D tpC Q R ~D D (nC w x D |D 4VB D D 4VB D D [C y D 8 D [C z D D D C D @ D h C D 1D tpC D 1D 8B D D tpC D D C D D p&C 2 D 6D ]B D 6D ]B D x D B D H7D `B D P7D `B l D ( C (nC 0 1 8 D \ D (nC . / h D D !C D D B D D A 3 D ` D A D +D L A D D L A D +D rC 4 8 D ` D @7@ l D C d A D D A D < D <jA H D C 8 @ D D gA D D (nC s t D < D l C < @ D C RB G H D D h\C 6 7 D D h\C 8 9 D ` D (nC : ; t D D 0C D D (nC D D (nC D D (nC $ D L D (nC ` D D (nC D D (nC D D (nC D D D rC X D D P B S T | D D B D 4 D B H D D | C D C C D C B E F D t D (nC i j | D D B { | $ D D (nC D D (nC D L D (nC \ X D D (nC ] D D (nC J D D x B D D cA D D dbA D D (nC D X D (nC l D D (nC D D (nC D D `A D 4 D ( B < D h D 4kC m n p D D (nC D D (nC D D (nC D D (nC D h D (nC o p t D D (nC D D B D 4 D (nC < D h D ` A  p D D 0 B D l D @7@ x D D @7@ D D @7@ D D (nC D D B D D B D L D B X D D MA D $ D B 4 D D B 8 7 D D (nC D D (nC D D ,B D @D x B H D l D -A x D D B D D ,B D @D x B D $ D ,B 0 D X D B h D x D 4 B D D B D D @5A D D B D 8 D (nC < D d D (nC K L h D D (nC M N D D [C D D UA D ID 8 B 0 D \ D dA l D D dA D D B D D B D D B D D (nC D 'D A P D P C 0 @ < D &D A d D D A D D ,B D $ D $ A , D x D ,B D D A D "D A D 0 D A @ D P D B d D D%D A x D $"D A D DD L B D L D rC T D d C H @ h D D SA D D @7@ D C 4 @ D D ( B D x D B D D LHA D D GA D P D ( B X D D ( B D C SA D D ,B D D B $ D x D B D t D 4 @ D D ,B D P D T @ \ D D x A D D *B D D (nC D D (nC C D D H D | A T D l D 2C x D D ZB D D tpC D D tpC D D tpC 0 D C ( @ H D D B D D B D D B $ D 0 D 0 @ 8 D H D 0 @ P D p D DB ` D D ,B D HBD < B ` D TBD < B D , D :A < D D EA D D @A 0 D D BA D D =A D D h B D D @ D D @ D D < @ D D OA D D @ h D D #B D D !B D < D d$B H D P D B \ D D 0 B D D H B D D T B D D B D D B D <D d B P D <D | B D 0 D B < D D B D D B D D B D C $XA 3 D @D B D D D +A P D ;D B d D d;D B ` D D <+A D D ,B D D ,B 0 D h D A ` D @,D B D C @ D D <!D X A D D ,B D D ,B D +D \$C 5 L D D 4VB D $ D B 0 D L D B X D l D vB D 4 D A < D L D A T D P D 4 A t D D ,B D l D t~B D D 'A D H D ,B X D D ,B 0 D p D %A D ,*D h B D )D A < D D ,B D D ,B D p D B | D D RA D D ,RA D D oB D D x$A t D D ,B D D mB D 0 D LsB D D 0 D < @ @ D D d=B D D mB D ` D jB p D D < A D D A D ( D ,B 4 D D B D 1D T5B D t D SA D 4 D A D D ,B D p E ,B x E E A E ,D ( B H E +D B E E ,B E t E ,B E E @ E E ` B E +D 4 B 8 E (8D `hB x E +D t B E +D B E +D B E +D 4 B < E +D t B \ E E .B E D @ A E @+D $ B 4 E E 8 A E E eB E P E \dB \ E E ,B E E E E E E E E E E E E E $ E 0 E 4 E @ E D E X E \ E H E h E p E t E | E E D E E E x E E E E E E E E E E E E E E E E E E E $ E , E 0 E 8 E < E D E H E ` E d E p E t E E E E E E E E E E E E E E E E E E E @ E ( E 4 E 8 E H E L E h E l E t E x E E E E E E E E E E E H E E E E E E E $ E 4 E 8 E D E H E X E \ E d E h E p E t E | E E E E E E E E E E E E E E E E E E E E E $ E , E 0 E < E @ E \ E ` E D p E x E | E E E E E E E E E E E E E E E E E 0 E E E E $ E ( E 0 E 4 E @ E D E L E P E \ E ` E h E l E x E | E E E E E E E E E E E E E E E E E , E 0 E 8 E < E D E H E P E T E ` E d E E E E E E E E E P E E E E E E E E E E E E E E E E 0 E 4 E H E L E T E X E d E h E E E E E E E d E E E E E E E E E E E E E E < E @ E L E P E X E \ E h E l E x E | E E E E E E E E E E E E E E E E E E E $ E ( E @ E D E L E P E \ E ` E l E p E | E E E E E E E E E E E E E E E E E E E E E E E E ( E , E 4 E 8 E @ E D E T E X E t E x E ( E E 0 E E E E E E E E E E E E E E X E E E E E $ E , E 0 E < E @ E L E P E X E \ E d E h E h E p E E E E E E E E E E E cD E E E E E , E 0 E H E L E \ E ` E h E l E t E x E E E E E E E E E E E E E E E E E 0 E 4 E C < E H E L E BD T E ` E d E | E E E E @E E E E E E E E E E E E $ E ( E D E H E P E T E \ E ` E h E l E E E #D E E E E E E E E E E E E E E E E $ E 4 E 8 E x E H E p E t E | E E E E E E E E E E E E E E E E E E ( E , E 8 E < E D E H E T E X E h E l E | E E , E 8 E @ E H E X E E E E E E pD E D E E E E E E E D E E @ E ,gD +D E E E pD E \ D E @ @ D E $ E ( E 0 E \ D D @ 8 E < E D E H E 4 D L E P E X E @` E h E D D l E t E | E E E E D EE @ D D EE D +D FE | D I
GCC: (GNU) 3.3.2 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 4.2.3 GCC: (GNU) 3.3.2
.shstrtab .interp .reginfo .dynamic .hash .dynsym .dynstr .gnu.version .gnu.version_r .init .text .MIPS.stubs .fini .rodata .eh_frame .ctors .dtors .jcr .data.rel.ro .data .rld_map .got .sdata .sbss .bss .comment .mdebug.abi32 .pdr

Indexes created Thu Sep 05 20:28:34 MDT 2024