1/* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 6 * 7 * This file is licenced under the GPL. 8 */ 9 10/* 11 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to 12 * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the 13 * host controller implementation. 14 */ 15typedef __u32 __bitwise __hc32; 16typedef __u16 __bitwise __hc16; 17 18/* 19 * OHCI Endpoint Descriptor (ED) ... holds TD queue 20 * See OHCI spec, section 4.2 21 * 22 * This is a "Queue Head" for those transfers, which is why 23 * both EHCI and UHCI call similar structures a "QH". 24 */ 25struct ed { 26 /* first fields are hardware-specified */ 27 __hc32 hwINFO; /* endpoint config bitmap */ 28 /* info bits defined by hcd */ 29#define ED_DEQUEUE (1 << 27) 30 /* info bits defined by the hardware */ 31#define ED_ISO (1 << 15) 32#define ED_SKIP (1 << 14) 33#define ED_LOWSPEED (1 << 13) 34#define ED_OUT (0x01 << 11) 35#define ED_IN (0x02 << 11) 36 __hc32 hwTailP; /* tail of TD list */ 37 __hc32 hwHeadP; /* head of TD list (hc r/w) */ 38#define ED_C (0x02) /* toggle carry */ 39#define ED_H (0x01) /* halted */ 40 __hc32 hwNextED; /* next ED in list */ 41 42 /* rest are purely for the driver's use */ 43 dma_addr_t dma; /* addr of ED */ 44 struct td *dummy; /* next TD to activate */ 45 46 /* host's view of schedule */ 47 struct ed *ed_next; /* on schedule or rm_list */ 48 struct ed *ed_prev; /* for non-interrupt EDs */ 49 struct list_head td_list; /* "shadow list" of our TDs */ 50 51 /* create --> IDLE --> OPER --> ... --> IDLE --> destroy 52 * usually: OPER --> UNLINK --> (IDLE | OPER) --> ... 53 */ 54 u8 state; /* ED_{IDLE,UNLINK,OPER} */ 55#define ED_IDLE 0x00 /* NOT linked to HC */ 56#define ED_UNLINK 0x01 /* being unlinked from hc */ 57#define ED_OPER 0x02 /* IS linked to hc */ 58 59 u8 type; /* PIPE_{BULK,...} */ 60 61 /* periodic scheduling params (for intr and iso) */ 62 u8 branch; 63 u16 interval; 64 u16 load; 65 u16 last_iso; /* iso only */ 66 67 /* HC may see EDs on rm_list until next frame (frame_no == tick) */ 68 u16 tick; 69} __attribute__ ((aligned(16))); 70 71#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */ 72 73 74/* 75 * OHCI Transfer Descriptor (TD) ... one per transfer segment 76 * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt) 77 * and 4.3.2 (iso) 78 */ 79struct td { 80 /* first fields are hardware-specified */ 81 __hc32 hwINFO; /* transfer info bitmask */ 82 83 /* hwINFO bits for both general and iso tds: */ 84#define TD_CC 0xf0000000 /* condition code */ 85#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) 86//#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) 87#define TD_DI 0x00E00000 /* frames before interrupt */ 88#define TD_DI_SET(X) (((X) & 0x07)<< 21) 89 /* these two bits are available for definition/use by HCDs in both 90 * general and iso tds ... others are available for only one type 91 */ 92#define TD_DONE 0x00020000 /* retired to donelist */ 93#define TD_ISO 0x00010000 /* copy of ED_ISO */ 94 95 /* hwINFO bits for general tds: */ 96#define TD_EC 0x0C000000 /* error count */ 97#define TD_T 0x03000000 /* data toggle state */ 98#define TD_T_DATA0 0x02000000 /* DATA0 */ 99#define TD_T_DATA1 0x03000000 /* DATA1 */ 100#define TD_T_TOGGLE 0x00000000 /* uses ED_C */ 101#define TD_DP 0x00180000 /* direction/pid */ 102#define TD_DP_SETUP 0x00000000 /* SETUP pid */ 103#define TD_DP_IN 0x00100000 /* IN pid */ 104#define TD_DP_OUT 0x00080000 /* OUT pid */ 105 /* 0x00180000 rsvd */ 106#define TD_R 0x00040000 /* round: short packets OK? */ 107 108 /* (no hwINFO #defines yet for iso tds) */ 109 110 __hc32 hwCBP; /* Current Buffer Pointer (or 0) */ 111 __hc32 hwNextTD; /* Next TD Pointer */ 112 __hc32 hwBE; /* Memory Buffer End Pointer */ 113 114 /* PSW is only for ISO. Only 1 PSW entry is used, but on 115 * big-endian PPC hardware that's the second entry. 116 */ 117#define MAXPSW 2 118 __hc16 hwPSW [MAXPSW]; 119 120 /* rest are purely for the driver's use */ 121 __u8 index; 122 struct ed *ed; 123 struct td *td_hash; /* dma-->td hashtable */ 124 struct td *next_dl_td; 125 struct urb *urb; 126 127 dma_addr_t td_dma; /* addr of this TD */ 128 dma_addr_t data_dma; /* addr of data it points to */ 129 130 struct list_head td_list; /* "shadow list", TDs on same ED */ 131} __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */ 132 133#define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */ 134 135/* 136 * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW 137 */ 138#define TD_CC_NOERROR 0x00 139#define TD_CC_CRC 0x01 140#define TD_CC_BITSTUFFING 0x02 141#define TD_CC_DATATOGGLEM 0x03 142#define TD_CC_STALL 0x04 143#define TD_DEVNOTRESP 0x05 144#define TD_PIDCHECKFAIL 0x06 145#define TD_UNEXPECTEDPID 0x07 146#define TD_DATAOVERRUN 0x08 147#define TD_DATAUNDERRUN 0x09 148 /* 0x0A, 0x0B reserved for hardware */ 149#define TD_BUFFEROVERRUN 0x0C 150#define TD_BUFFERUNDERRUN 0x0D 151 /* 0x0E, 0x0F reserved for HCD */ 152#define TD_NOTACCESSED 0x0F 153 154 155/* map OHCI TD status codes (CC) to errno values */ 156static const int cc_to_error [16] = { 157 /* No Error */ 0, 158 /* CRC Error */ -EILSEQ, 159 /* Bit Stuff */ -EPROTO, 160 /* Data Togg */ -EILSEQ, 161 /* Stall */ -EPIPE, 162 /* DevNotResp */ -ETIME, 163 /* PIDCheck */ -EPROTO, 164 /* UnExpPID */ -EPROTO, 165 /* DataOver */ -EOVERFLOW, 166 /* DataUnder */ -EREMOTEIO, 167 /* (for hw) */ -EIO, 168 /* (for hw) */ -EIO, 169 /* BufferOver */ -ECOMM, 170 /* BuffUnder */ -ENOSR, 171 /* (for HCD) */ -EALREADY, 172 /* (for HCD) */ -EALREADY 173}; 174 175 176/* 177 * The HCCA (Host Controller Communications Area) is a 256 byte 178 * structure defined section 4.4.1 of the OHCI spec. The HC is 179 * told the base address of it. It must be 256-byte aligned. 180 */ 181struct ohci_hcca { 182#define NUM_INTS 32 183 __hc32 int_table [NUM_INTS]; /* periodic schedule */ 184 185 /* 186 * OHCI defines u16 frame_no, followed by u16 zero pad. 187 * Since some processors can't do 16 bit bus accesses, 188 * portable access must be a 32 bits wide. 189 */ 190 __hc32 frame_no; /* current frame number */ 191 __hc32 done_head; /* info returned for an interrupt */ 192 u8 reserved_for_hc [116]; 193 u8 what [4]; /* spec only identifies 252 bytes :) */ 194} __attribute__ ((aligned(256))); 195 196/* 197 * This is the structure of the OHCI controller's memory mapped I/O region. 198 * You must use readl() and writel() (in <asm/io.h>) to access these fields!! 199 * Layout is in section 7 (and appendix B) of the spec. 200 */ 201struct ohci_regs { 202 /* control and status registers (section 7.1) */ 203 __hc32 revision; 204 __hc32 control; 205 __hc32 cmdstatus; 206 __hc32 intrstatus; 207 __hc32 intrenable; 208 __hc32 intrdisable; 209 210 /* memory pointers (section 7.2) */ 211 __hc32 hcca; 212 __hc32 ed_periodcurrent; 213 __hc32 ed_controlhead; 214 __hc32 ed_controlcurrent; 215 __hc32 ed_bulkhead; 216 __hc32 ed_bulkcurrent; 217 __hc32 donehead; 218 219 /* frame counters (section 7.3) */ 220 __hc32 fminterval; 221 __hc32 fmremaining; 222 __hc32 fmnumber; 223 __hc32 periodicstart; 224 __hc32 lsthresh; 225 226 /* Root hub ports (section 7.4) */ 227 struct ohci_roothub_regs { 228 __hc32 a; 229 __hc32 b; 230 __hc32 status; 231#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */ 232 __hc32 portstatus [MAX_ROOT_PORTS]; 233 } roothub; 234 235 /* and optional "legacy support" registers (appendix B) at 0x0100 */ 236 237} __attribute__ ((aligned(32))); 238 239 240/* OHCI CONTROL AND STATUS REGISTER MASKS */ 241 242/* 243 * HcControl (control) register masks 244 */ 245#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ 246#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ 247#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ 248#define OHCI_CTRL_CLE (1 << 4) /* control list enable */ 249#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ 250#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ 251#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ 252#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ 253#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ 254 255/* pre-shifted values for HCFS */ 256# define OHCI_USB_RESET (0 << 6) 257# define OHCI_USB_RESUME (1 << 6) 258# define OHCI_USB_OPER (2 << 6) 259# define OHCI_USB_SUSPEND (3 << 6) 260 261/* 262 * HcCommandStatus (cmdstatus) register masks 263 */ 264#define OHCI_HCR (1 << 0) /* host controller reset */ 265#define OHCI_CLF (1 << 1) /* control list filled */ 266#define OHCI_BLF (1 << 2) /* bulk list filled */ 267#define OHCI_OCR (1 << 3) /* ownership change request */ 268#define OHCI_SOC (3 << 16) /* scheduling overrun count */ 269 270/* 271 * masks used with interrupt registers: 272 * HcInterruptStatus (intrstatus) 273 * HcInterruptEnable (intrenable) 274 * HcInterruptDisable (intrdisable) 275 */ 276#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ 277#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ 278#define OHCI_INTR_SF (1 << 2) /* start frame */ 279#define OHCI_INTR_RD (1 << 3) /* resume detect */ 280#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ 281#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ 282#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ 283#define OHCI_INTR_OC (1 << 30) /* ownership change */ 284#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ 285 286 287/* OHCI ROOT HUB REGISTER MASKS */ 288 289/* roothub.portstatus [i] bits */ 290#define RH_PS_CCS 0x00000001 /* current connect status */ 291#define RH_PS_PES 0x00000002 /* port enable status*/ 292#define RH_PS_PSS 0x00000004 /* port suspend status */ 293#define RH_PS_POCI 0x00000008 /* port over current indicator */ 294#define RH_PS_PRS 0x00000010 /* port reset status */ 295#define RH_PS_PPS 0x00000100 /* port power status */ 296#define RH_PS_LSDA 0x00000200 /* low speed device attached */ 297#define RH_PS_CSC 0x00010000 /* connect status change */ 298#define RH_PS_PESC 0x00020000 /* port enable status change */ 299#define RH_PS_PSSC 0x00040000 /* port suspend status change */ 300#define RH_PS_OCIC 0x00080000 /* over current indicator change */ 301#define RH_PS_PRSC 0x00100000 /* port reset status change */ 302 303/* roothub.status bits */ 304#define RH_HS_LPS 0x00000001 /* local power status */ 305#define RH_HS_OCI 0x00000002 /* over current indicator */ 306#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ 307#define RH_HS_LPSC 0x00010000 /* local power status change */ 308#define RH_HS_OCIC 0x00020000 /* over current indicator change */ 309#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ 310 311/* roothub.b masks */ 312#define RH_B_DR 0x0000ffff /* device removable flags */ 313#define RH_B_PPCM 0xffff0000 /* port power control mask */ 314 315/* roothub.a masks */ 316#define RH_A_NDP (0xff << 0) /* number of downstream ports */ 317#define RH_A_PSM (1 << 8) /* power switching mode */ 318#define RH_A_NPS (1 << 9) /* no power switching */ 319#define RH_A_DT (1 << 10) /* device type (mbz) */ 320#define RH_A_OCPM (1 << 11) /* over current protection mode */ 321#define RH_A_NOCP (1 << 12) /* no over current protection */ 322#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ 323 324 325/* hcd-private per-urb state */ 326typedef struct urb_priv { 327 struct ed *ed; 328 u16 length; // # tds in this request 329 u16 td_cnt; // tds already serviced 330 struct list_head pending; 331 struct td *td [0]; // all TDs in this request 332 333} urb_priv_t; 334 335#define TD_HASH_SIZE 64 /* power'o'two */ 336// sizeof (struct td) ~= 64 == 2^6 ... 337#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE) 338 339 340/* 341 * This is the full ohci controller description 342 * 343 * Note how the "proper" USB information is just 344 * a subset of what the full implementation needs. (Linus) 345 */ 346 347struct ohci_hcd { 348 spinlock_t lock; 349 350 /* 351 * I/O memory used to communicate with the HC (dma-consistent) 352 */ 353 struct ohci_regs __iomem *regs; 354 355 /* 356 * main memory used to communicate with the HC (dma-consistent). 357 * hcd adds to schedule for a live hc any time, but removals finish 358 * only at the start of the next frame. 359 */ 360 struct ohci_hcca *hcca; 361 dma_addr_t hcca_dma; 362 363 struct ed *ed_rm_list; /* to be removed */ 364 365 struct ed *ed_bulktail; /* last in bulk list */ 366 struct ed *ed_controltail; /* last in ctrl list */ 367 struct ed *periodic [NUM_INTS]; /* shadow int_table */ 368 369 /* 370 * OTG controllers and transceivers need software interaction; 371 * other external transceivers should be software-transparent 372 */ 373 struct otg_transceiver *transceiver; 374 375 /* 376 * memory management for queue data structures 377 */ 378 struct dma_pool *td_cache; 379 struct dma_pool *ed_cache; 380 struct td *td_hash [TD_HASH_SIZE]; 381 struct list_head pending; 382 383 /* 384 * driver state 385 */ 386 int num_ports; 387 int load [NUM_INTS]; 388 u32 hc_control; /* copy of hc control reg */ 389 unsigned long next_statechange; /* suspend/resume */ 390 u32 fminterval; /* saved register */ 391 unsigned autostop:1; /* rh auto stopping/stopped */ 392 393 unsigned long flags; /* for HC bugs */ 394#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */ 395#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */ 396#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */ 397#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */ 398#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ 399#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ 400 // there are also chip quirks/bugs in init logic 401 402}; 403 404/* convert between an hcd pointer and the corresponding ohci_hcd */ 405static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd) 406{ 407 return (struct ohci_hcd *) (hcd->hcd_priv); 408} 409static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci) 410{ 411 return container_of ((void *) ohci, struct usb_hcd, hcd_priv); 412} 413 414/*-------------------------------------------------------------------------*/ 415 416#ifndef DEBUG 417#define STUB_DEBUG_FILES 418#endif /* DEBUG */ 419 420#define ohci_dbg(ohci, fmt, args...) \ 421 dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 422#define ohci_err(ohci, fmt, args...) \ 423 dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 424#define ohci_info(ohci, fmt, args...) \ 425 dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 426#define ohci_warn(ohci, fmt, args...) \ 427 dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 428 429#ifdef OHCI_VERBOSE_DEBUG 430# define ohci_vdbg ohci_dbg 431#else 432# define ohci_vdbg(ohci, fmt, args...) do { } while (0) 433#endif 434 435/*-------------------------------------------------------------------------*/ 436 437/* 438 * While most USB host controllers implement their registers and 439 * in-memory communication descriptors in little-endian format, 440 * a minority (notably the IBM STB04XXX and the Motorola MPC5200 441 * processors) implement them in big endian format. 442 * 443 * In addition some more exotic implementations like the Toshiba 444 * Spider (aka SCC) cell southbridge are "mixed" endian, that is, 445 * they have a different endianness for registers vs. in-memory 446 * descriptors. 447 * 448 * This attempts to support either format at compile time without a 449 * runtime penalty, or both formats with the additional overhead 450 * of checking a flag bit. 451 * 452 * That leads to some tricky Kconfig rules howevber. There are 453 * different defaults based on some arch/ppc platforms, though 454 * the basic rules are: 455 * 456 * Controller type Kconfig options needed 457 * --------------- ---------------------- 458 * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN 459 * 460 * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_ 461 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 462 * 463 * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_ 464 * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC} 465 * 466 * (If you have a mixed endian controller, you -must- also define 467 * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building 468 * both your mixed endian and a fully big endian controller support in 469 * the same kernel image). 470 */ 471 472#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC 473#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN 474#define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC) 475#else 476#define big_endian_desc(ohci) 1 /* only big endian */ 477#endif 478#else 479#define big_endian_desc(ohci) 0 /* only little endian */ 480#endif 481 482#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 483#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN 484#define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO) 485#else 486#define big_endian_mmio(ohci) 1 /* only big endian */ 487#endif 488#else 489#define big_endian_mmio(ohci) 0 /* only little endian */ 490#endif 491 492/* 493 * Big-endian read/write functions are arch-specific. 494 * Other arches can be added if/when they're needed. 495 * 496 * REVISIT: arch/powerpc now has readl/writel_be, so the 497 * definition below can die once the STB04xxx support is 498 * finally ported over. 499 */ 500#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE) 501#define readl_be(addr) in_be32((__force unsigned *)addr) 502#define writel_be(val, addr) out_be32((__force unsigned *)addr, val) 503#endif 504 505static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, 506 __hc32 __iomem * regs) 507{ 508#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 509 return big_endian_mmio(ohci) ? 510 readl_be (regs) : 511 readl (regs); 512#else 513 return readl (regs); 514#endif 515} 516 517static inline void _ohci_writel (const struct ohci_hcd *ohci, 518 const unsigned int val, __hc32 __iomem *regs) 519{ 520#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 521 big_endian_mmio(ohci) ? 522 writel_be (val, regs) : 523 writel (val, regs); 524#else 525 writel (val, regs); 526#endif 527} 528 529#ifdef CONFIG_ARCH_LH7A404 530#define ohci_readl(o,r) (_ohci_readl(o,r),_ohci_readl(o,r)) 531#define ohci_writel(o,v,r) _ohci_writel(o,v,r) 532#else 533#define ohci_readl(o,r) _ohci_readl(o,r) 534#define ohci_writel(o,v,r) _ohci_writel(o,v,r) 535#endif 536 537 538/*-------------------------------------------------------------------------*/ 539 540/* cpu to ohci */ 541static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x) 542{ 543 return big_endian_desc(ohci) ? 544 (__force __hc16)cpu_to_be16(x) : 545 (__force __hc16)cpu_to_le16(x); 546} 547 548static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x) 549{ 550 return big_endian_desc(ohci) ? 551 cpu_to_be16p(x) : 552 cpu_to_le16p(x); 553} 554 555static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x) 556{ 557 return big_endian_desc(ohci) ? 558 (__force __hc32)cpu_to_be32(x) : 559 (__force __hc32)cpu_to_le32(x); 560} 561 562static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x) 563{ 564 return big_endian_desc(ohci) ? 565 cpu_to_be32p(x) : 566 cpu_to_le32p(x); 567} 568 569/* ohci to cpu */ 570static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x) 571{ 572 return big_endian_desc(ohci) ? 573 be16_to_cpu((__force __be16)x) : 574 le16_to_cpu((__force __le16)x); 575} 576 577static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x) 578{ 579 return big_endian_desc(ohci) ? 580 be16_to_cpup((__force __be16 *)x) : 581 le16_to_cpup((__force __le16 *)x); 582} 583 584static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x) 585{ 586 return big_endian_desc(ohci) ? 587 be32_to_cpu((__force __be32)x) : 588 le32_to_cpu((__force __le32)x); 589} 590 591static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x) 592{ 593 return big_endian_desc(ohci) ? 594 be32_to_cpup((__force __be32 *)x) : 595 le32_to_cpup((__force __le32 *)x); 596} 597 598/*-------------------------------------------------------------------------*/ 599 600 601#ifdef CONFIG_STB03xxx 602#define OHCI_BE_FRAME_NO_SHIFT 16 603#else 604#define OHCI_BE_FRAME_NO_SHIFT 0 605#endif 606 607static inline u16 ohci_frame_no(const struct ohci_hcd *ohci) 608{ 609 u32 tmp; 610 if (big_endian_desc(ohci)) { 611 tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no); 612 tmp >>= OHCI_BE_FRAME_NO_SHIFT; 613 } else 614 tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no); 615 616 return (u16)tmp; 617} 618 619static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci, 620 const struct td *td, int index) 621{ 622 return (__hc16 *)(big_endian_desc(ohci) ? 623 &td->hwPSW[index ^ 1] : &td->hwPSW[index]); 624} 625 626static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci, 627 const struct td *td, int index) 628{ 629 return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index)); 630} 631 632/*-------------------------------------------------------------------------*/ 633 634static inline void disable (struct ohci_hcd *ohci) 635{ 636 ohci_to_hcd(ohci)->state = HC_STATE_HALT; 637} 638 639#define FI 0x2edf /* 12000 bits per frame (-1) */ 640#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7)) 641#define FIT (1 << 31) 642#define LSTHRESH 0x628 /* lowspeed bit threshold */ 643 644static inline void periodic_reinit (struct ohci_hcd *ohci) 645{ 646 u32 fi = ohci->fminterval & 0x03fff; 647 u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT; 648 649 ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval, 650 &ohci->regs->fminterval); 651 ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff, 652 &ohci->regs->periodicstart); 653} 654 655#define read_roothub(hc, register, mask) ({ \ 656 u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \ 657 if (temp == -1) \ 658 disable (hc); \ 659 else if (hc->flags & OHCI_QUIRK_AMD756) \ 660 while (temp & mask) \ 661 temp = ohci_readl (hc, &hc->regs->roothub.register); \ 662 temp; }) 663 664static inline u32 roothub_a (struct ohci_hcd *hc) 665 { return read_roothub (hc, a, 0xfc0fe000); } 666static inline u32 roothub_b (struct ohci_hcd *hc) 667 { return ohci_readl (hc, &hc->regs->roothub.b); } 668static inline u32 roothub_status (struct ohci_hcd *hc) 669 { return ohci_readl (hc, &hc->regs->roothub.status); } 670static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i) 671 { return read_roothub (hc, portstatus [i], 0xffe0fce0); } 672