1/* enternow_pci.c,v 0.99 2001/10/02 2 * 3 * enternow_pci.c Card-specific routines for 4 * Formula-n enter:now ISDN PCI ab 5 * Gerdes AG Power ISDN PCI 6 * Woerltronic SA 16 PCI 7 * (based on HiSax driver by Karsten Keil) 8 * 9 * Author Christoph Ersfeld <info@formula-n.de> 10 * Formula-n Europe AG (www.formula-n.com) 11 * previously Gerdes AG 12 * 13 * 14 * This file is (c) under GNU PUBLIC LICENSE 15 * 16 * Notes: 17 * This driver interfaces to netjet.c which performs B-channel 18 * processing. 19 * 20 * Version 0.99 is the first release of this driver and there are 21 * certainly a few bugs. 22 * It isn't testet on linux 2.4 yet, so consider this code to be 23 * beta. 24 * 25 * Please don't report me any malfunction without sending 26 * (compressed) debug-logs. 27 * It would be nearly impossible to retrace it. 28 * 29 * Log D-channel-processing as follows: 30 * 31 * 1. Load hisax with card-specific parameters, this example ist for 32 * Formula-n enter:now ISDN PCI and compatible 33 * (f.e. Gerdes Power ISDN PCI) 34 * 35 * modprobe hisax type=41 protocol=2 id=gerdes 36 * 37 * if you chose an other value for id, you need to modify the 38 * code below, too. 39 * 40 * 2. set debug-level 41 * 42 * hisaxctrl gerdes 1 0x3ff 43 * hisaxctrl gerdes 11 0x4f 44 * cat /dev/isdnctrl >> ~/log & 45 * 46 * Please take also a look into /var/log/messages if there is 47 * anything importand concerning HISAX. 48 * 49 * 50 * Credits: 51 * Programming the driver for Formula-n enter:now ISDN PCI and 52 * necessary the driver for the used Amd 7930 D-channel-controller 53 * was spnsored by Formula-n Europe AG. 54 * Thanks to Karsten Keil and Petr Novak, who gave me support in 55 * Hisax-specific questions. 56 * I want so say special thanks to Carl-Friedrich Braun, who had to 57 * answer a lot of questions about generally ISDN and about handling 58 * of the Amd-Chip. 59 * 60 */ 61 62 63#include "hisax.h" 64#include "isac.h" 65#include "isdnl1.h" 66#include "amd7930_fn.h" 67#include <linux/interrupt.h> 68#include <linux/ppp_defs.h> 69#include <linux/pci.h> 70#include <linux/init.h> 71#include "netjet.h" 72 73 74 75static const char *enternow_pci_rev = "$Revision: 1.1.1.1 $"; 76 77 78/* f�r PowerISDN PCI */ 79#define TJ_AMD_IRQ 0x20 80#define TJ_LED1 0x40 81#define TJ_LED2 0x80 82 83 84/* Das Fenster zum AMD... 85 * Ab Adresse hw.njet.base + TJ_AMD_PORT werden vom AMD jeweils 8 Bit in 86 * den TigerJet i/o-Raum gemappt 87 * -> 0x01 des AMD bei hw.njet.base + 0C4 */ 88#define TJ_AMD_PORT 0xC0 89 90 91 92/* *************************** I/O-Interface functions ************************************* */ 93 94 95/* cs->readisac, macro rByteAMD */ 96static unsigned char 97ReadByteAmd7930(struct IsdnCardState *cs, unsigned char offset) 98{ 99 /* direktes Register */ 100 if(offset < 8) 101 return (inb(cs->hw.njet.isac + 4*offset)); 102 103 /* indirektes Register */ 104 else { 105 outb(offset, cs->hw.njet.isac + 4*AMD_CR); 106 return(inb(cs->hw.njet.isac + 4*AMD_DR)); 107 } 108} 109 110/* cs->writeisac, macro wByteAMD */ 111static void 112WriteByteAmd7930(struct IsdnCardState *cs, unsigned char offset, unsigned char value) 113{ 114 /* direktes Register */ 115 if(offset < 8) 116 outb(value, cs->hw.njet.isac + 4*offset); 117 118 /* indirektes Register */ 119 else { 120 outb(offset, cs->hw.njet.isac + 4*AMD_CR); 121 outb(value, cs->hw.njet.isac + 4*AMD_DR); 122 } 123} 124 125 126static void 127enpci_setIrqMask(struct IsdnCardState *cs, unsigned char val) { 128 if (!val) 129 outb(0x00, cs->hw.njet.base+NETJET_IRQMASK1); 130 else 131 outb(TJ_AMD_IRQ, cs->hw.njet.base+NETJET_IRQMASK1); 132} 133 134 135static unsigned char dummyrr(struct IsdnCardState *cs, int chan, unsigned char off) 136{ 137 return(5); 138} 139 140static void dummywr(struct IsdnCardState *cs, int chan, unsigned char off, unsigned char value) 141{ 142 143} 144 145 146/* ******************************************************************************** */ 147 148 149static void 150reset_enpci(struct IsdnCardState *cs) 151{ 152 if (cs->debug & L1_DEB_ISAC) 153 debugl1(cs, "enter:now PCI: reset"); 154 155 /* Reset on, (also for AMD) */ 156 cs->hw.njet.ctrl_reg = 0x07; 157 outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL); 158 mdelay(20); 159 /* Reset off */ 160 cs->hw.njet.ctrl_reg = 0x30; 161 outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL); 162 /* 20ms delay */ 163 mdelay(20); 164 cs->hw.njet.auxd = 0; // LED-status 165 cs->hw.njet.dmactrl = 0; 166 outb(~TJ_AMD_IRQ, cs->hw.njet.base + NETJET_AUXCTRL); 167 outb(TJ_AMD_IRQ, cs->hw.njet.base + NETJET_IRQMASK1); 168 outb(cs->hw.njet.auxd, cs->hw.njet.auxa); // LED off 169} 170 171 172static int 173enpci_card_msg(struct IsdnCardState *cs, int mt, void *arg) 174{ 175 u_long flags; 176 unsigned char *chan; 177 178 if (cs->debug & L1_DEB_ISAC) 179 debugl1(cs, "enter:now PCI: card_msg: 0x%04X", mt); 180 181 switch (mt) { 182 case CARD_RESET: 183 spin_lock_irqsave(&cs->lock, flags); 184 reset_enpci(cs); 185 Amd7930_init(cs); 186 spin_unlock_irqrestore(&cs->lock, flags); 187 break; 188 case CARD_RELEASE: 189 release_io_netjet(cs); 190 break; 191 case CARD_INIT: 192 reset_enpci(cs); 193 inittiger(cs); 194 /* irq must be on here */ 195 Amd7930_init(cs); 196 break; 197 case CARD_TEST: 198 break; 199 case MDL_ASSIGN: 200 /* TEI assigned, LED1 on */ 201 cs->hw.njet.auxd = TJ_AMD_IRQ << 1; 202 outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA); 203 break; 204 case MDL_REMOVE: 205 /* TEI removed, LEDs off */ 206 cs->hw.njet.auxd = 0; 207 outb(0x00, cs->hw.njet.base + NETJET_AUXDATA); 208 break; 209 case MDL_BC_ASSIGN: 210 /* activate B-channel */ 211 chan = (unsigned char *)arg; 212 213 if (cs->debug & L1_DEB_ISAC) 214 debugl1(cs, "enter:now PCI: assign phys. BC %d in AMD LMR1", *chan); 215 216 cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 | (*chan + 1)), "MDL_BC_ASSIGN"); 217 /* at least one b-channel in use, LED 2 on */ 218 cs->hw.njet.auxd |= TJ_AMD_IRQ << 2; 219 outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA); 220 break; 221 case MDL_BC_RELEASE: 222 /* deactivate B-channel */ 223 chan = (unsigned char *)arg; 224 225 if (cs->debug & L1_DEB_ISAC) 226 debugl1(cs, "enter:now PCI: release phys. BC %d in Amd LMR1", *chan); 227 228 cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 & ~(*chan + 1)), "MDL_BC_RELEASE"); 229 /* no b-channel active -> LED2 off */ 230 if (!(cs->dc.amd7930.lmr1 & 3)) { 231 cs->hw.njet.auxd &= ~(TJ_AMD_IRQ << 2); 232 outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA); 233 } 234 break; 235 default: 236 break; 237 238 } 239 return(0); 240} 241 242static irqreturn_t 243enpci_interrupt(int intno, void *dev_id) 244{ 245 struct IsdnCardState *cs = dev_id; 246 unsigned char s0val, s1val, ir; 247 u_long flags; 248 249 spin_lock_irqsave(&cs->lock, flags); 250 s1val = inb(cs->hw.njet.base + NETJET_IRQSTAT1); 251 252 /* AMD threw an interrupt */ 253 if (!(s1val & TJ_AMD_IRQ)) { 254 /* read and clear interrupt-register */ 255 ir = ReadByteAmd7930(cs, 0x00); 256 Amd7930_interrupt(cs, ir); 257 s1val = 1; 258 } else 259 s1val = 0; 260 s0val = inb(cs->hw.njet.base + NETJET_IRQSTAT0); 261 if ((s0val | s1val)==0) { // shared IRQ 262 spin_unlock_irqrestore(&cs->lock, flags); 263 return IRQ_NONE; 264 } 265 if (s0val) 266 outb(s0val, cs->hw.njet.base + NETJET_IRQSTAT0); 267 268 /* DMA-Interrupt: B-channel-stuff */ 269 /* set bits in sval to indicate which page is free */ 270 if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) < 271 inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ)) 272 /* the 2nd write page is free */ 273 s0val = 0x08; 274 else /* the 1st write page is free */ 275 s0val = 0x04; 276 if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) < 277 inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ)) 278 /* the 2nd read page is free */ 279 s0val = s0val | 0x02; 280 else /* the 1st read page is free */ 281 s0val = s0val | 0x01; 282 if (s0val != cs->hw.njet.last_is0) /* we have a DMA interrupt */ 283 { 284 if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) { 285 spin_unlock_irqrestore(&cs->lock, flags); 286 return IRQ_HANDLED; 287 } 288 cs->hw.njet.irqstat0 = s0val; 289 if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) != 290 (cs->hw.njet.last_is0 & NETJET_IRQM0_READ)) 291 /* we have a read dma int */ 292 read_tiger(cs); 293 if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) != 294 (cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE)) 295 /* we have a write dma int */ 296 write_tiger(cs); 297 test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags); 298 } 299 spin_unlock_irqrestore(&cs->lock, flags); 300 return IRQ_HANDLED; 301} 302 303 304static struct pci_dev *dev_netjet __devinitdata = NULL; 305 306/* called by config.c */ 307int __devinit 308setup_enternow_pci(struct IsdnCard *card) 309{ 310 int bytecnt; 311 struct IsdnCardState *cs = card->cs; 312 char tmp[64]; 313 314#ifdef CONFIG_PCI 315#ifdef __BIG_ENDIAN 316#error "not running on big endian machines now" 317#endif 318 strcpy(tmp, enternow_pci_rev); 319 printk(KERN_INFO "HiSax: Formula-n Europe AG enter:now ISDN PCI driver Rev. %s\n", HiSax_getrev(tmp)); 320 if (cs->typ != ISDN_CTYPE_ENTERNOW) 321 return(0); 322 test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags); 323 324 for ( ;; ) 325 { 326 if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, 327 PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { 328 if (pci_enable_device(dev_netjet)) 329 return(0); 330 cs->irq = dev_netjet->irq; 331 if (!cs->irq) { 332 printk(KERN_WARNING "enter:now PCI: No IRQ for PCI card found\n"); 333 return(0); 334 } 335 cs->hw.njet.base = pci_resource_start(dev_netjet, 0); 336 if (!cs->hw.njet.base) { 337 printk(KERN_WARNING "enter:now PCI: No IO-Adr for PCI card found\n"); 338 return(0); 339 } 340 /* checks Sub-Vendor ID because system crashes with Traverse-Card */ 341 if ((dev_netjet->subsystem_vendor != 0x55) || 342 (dev_netjet->subsystem_device != 0x02)) { 343 printk(KERN_WARNING "enter:now: You tried to load this driver with an incompatible TigerJet-card\n"); 344 printk(KERN_WARNING "Use type=20 for Traverse NetJet PCI Card.\n"); 345 return(0); 346 } 347 } else { 348 printk(KERN_WARNING "enter:now PCI: No PCI card found\n"); 349 return(0); 350 } 351 352 cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA; 353 cs->hw.njet.isac = cs->hw.njet.base + 0xC0; // Fenster zum AMD 354 355 /* Reset an */ 356 cs->hw.njet.ctrl_reg = 0x07; // ge�ndert von 0xff 357 outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL); 358 /* 20 ms Pause */ 359 mdelay(20); 360 361 cs->hw.njet.ctrl_reg = 0x30; /* Reset Off and status read clear */ 362 outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL); 363 mdelay(10); 364 365 cs->hw.njet.auxd = 0x00; // war 0xc0 366 cs->hw.njet.dmactrl = 0; 367 368 outb(~TJ_AMD_IRQ, cs->hw.njet.base + NETJET_AUXCTRL); 369 outb(TJ_AMD_IRQ, cs->hw.njet.base + NETJET_IRQMASK1); 370 outb(cs->hw.njet.auxd, cs->hw.njet.auxa); 371 372 break; 373 } 374#else 375 376 printk(KERN_WARNING "enter:now PCI: NO_PCI_BIOS\n"); 377 printk(KERN_WARNING "enter:now PCI: unable to config Formula-n enter:now ISDN PCI ab\n"); 378 return (0); 379 380#endif /* CONFIG_PCI */ 381 382 bytecnt = 256; 383 384 printk(KERN_INFO 385 "enter:now PCI: PCI card configured at 0x%lx IRQ %d\n", 386 cs->hw.njet.base, cs->irq); 387 if (!request_region(cs->hw.njet.base, bytecnt, "Fn_ISDN")) { 388 printk(KERN_WARNING 389 "HiSax: %s config port %lx-%lx already in use\n", 390 CardType[card->typ], 391 cs->hw.njet.base, 392 cs->hw.njet.base + bytecnt); 393 return (0); 394 } 395 setup_Amd7930(cs); 396 cs->hw.njet.last_is0 = 0; 397 /* macro rByteAMD */ 398 cs->readisac = &ReadByteAmd7930; 399 /* macro wByteAMD */ 400 cs->writeisac = &WriteByteAmd7930; 401 cs->dc.amd7930.setIrqMask = &enpci_setIrqMask; 402 403 cs->BC_Read_Reg = &dummyrr; 404 cs->BC_Write_Reg = &dummywr; 405 cs->BC_Send_Data = &netjet_fill_dma; 406 cs->cardmsg = &enpci_card_msg; 407 cs->irq_func = &enpci_interrupt; 408 cs->irq_flags |= IRQF_SHARED; 409 410 return (1); 411} 412