1To configure the Crystal CS423x sound chip and activate its DSP functions,
2modules may be loaded in this order:
3  
4	modprobe sound
5	insmod ad1848
6	insmod uart401
7	insmod cs4232 io=* irq=* dma=* dma2=*
8  
9This is the meaning of the parameters:
10  
11	io--I/O address of the Windows Sound System (normally 0x534)
12	irq--IRQ of this device
13	dma and dma2--DMA channels (DMA2 may be 0)
14  
15On some cards, the board attempts to do non-PnP setup, and fails.  If you
16have problems, use Linux' PnP facilities. 
17  
18To get MIDI facilities add
19  
20	insmod opl3 io=*
21  
22where "io" is the I/O address of the OPL3 synthesizer. This will be shown
23in /proc/sys/pnp and is normally 0x388.
24