1# BCM95350RG sdram board
2# Copyright (C) 2010, Broadcom Corporation. All Rights Reserved.
3# 
4# Permission to use, copy, modify, and/or distribute this software for any
5# purpose with or without fee is hereby granted, provided that the above
6# copyright notice and this permission notice appear in all copies.
7# 
8# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15# $Id: bcm95350rg_rev3.txt,v 1.7 2005/03/03 20:05:11 Exp $
16boardtype=0x0456
17boardnum=${serno}
18# Board revision 4.1
19boardrev=0x41
20boardflags=0x1758
21sromrev=2
22
23# MIPS clock frequency in MHz
24clkfreq=200
25
26# 16 MB SDR SDRAM (4 Meg x 16 x 2)
27sdram_init=0x0000
28sdram_config=0x22
29sdram_refresh=0x0
30sdram_ncdl=0
31
32# Ethernet w/Robo switch
33et0macaddr=00:90:4c:7d:${maclo}
34et0phyaddr=30
35et0mdcport=0
36
37# Bootloader variables
38dl_ram_addr=a0001000
39os_ram_addr=80001000
40os_flash_addr=bfc40000
41lan_ipaddr=192.168.1.1
42lan_netmask=255.255.255.0
43scratch=a0180000
44boot_wait=on
45reset_gpio=3
46
47# Watchdog timer in ms
48watchdog=3000
49
50# Make the d11 i/f single band
51wl0id=0x4320
52
53# 5350 802.11g parameters
54il0macaddr=00:90:4c:7e:${maclo}
55aa0=1
56ag0=255
57pa0maxpwr=80
58pa0itssit=62
59pa0b0=0x1780
60pa0b1=0xfa7a
61pa0b2=0xfea5
62opo=12
63
64# Commons wireless parameters
65ccode=0
66
67# Robo switch config (vlan0:LAN, vlan1:WAN)
68vlan0hwname=et0
69vlan0ports=1 2 3 4 5*
70vlan1hwname=et0
71vlan1ports=0 5u
72
73# Bootloader and OS glue
74landevs=vlan0 wl0
75wandevs=et0
76
77# Wireless LED GPIO mapping/behavior
78wl0gpio2=11
79
80# SES parameters
81gpio1=ses_led
82gpio2=ses_button
83