1# BCM94712LGR DDR board 2# Copyright (C) 2010, Broadcom Corporation. All Rights Reserved. 3# 4# Permission to use, copy, modify, and/or distribute this software for any 5# purpose with or without fee is hereby granted, provided that the above 6# copyright notice and this permission notice appear in all copies. 7# 8# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 11# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 13# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 14# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15# $Id: bcm94712lgr.txt,v 1.13 2004/09/13 21:16:44 Exp $ 16boardtype=0x0460 17boardnum=${serno} 18# Board revision 1.7 19boardrev=0x17 20boardflags=0x0758 21sromrev=2 22 23# MIPS clock frequency in MHz 24clkfreq=200 25 26# 32 MB DDR SDRAM (16 Meg x 16) 27sdram_init=0x000b 28sdram_config=0x0062 29sdram_refresh=0x0000 30sdram_ncdl=0 31 32# Ethernet w/BCM5325E switch 33et0macaddr=00:90:4c:88:${maclo} 34et0phyaddr=30 35et0mdcport=0 36 37# BCM5325E switch reset 38gpio6=robo_reset 39 40# Make the d11 i/f single band 41wl0id=0x4320 42 43# 4712 802.11g parameters 44il0macaddr=00:90:4c:89:${maclo} 45aa0=3 46ag0=2 47pa0maxpwr=76 48pa0itssit=62 49pa0b0=0x153d 50pa0b1=0xfb91 51pa0b2=0xfeb7 52opo=8 53 54# Commons wireless parameters 55cctl=0 56ccode=0 57 58# Bootlaoder variables 59dl_ram_addr=a0001000 60os_ram_addr=80001000 61os_flash_addr=bfc40000 62lan_ipaddr=192.168.1.1 63lan_netmask=255.255.255.0 64scratch=a0180000 65boot_wait=on 66reset_gpio=7 67 68# Watchdog timer in ms 69watchdog=3000 70 71# Robo switch config (vlan0:LAN, vlan1:WAN) 72vlan0ports=1 2 3 4 5* 73vlan0hwname=et0 74vlan1ports=0 5u 75vlan1hwname=et0 76 77#Bootloader and OS glue 78landevs=vlan0 wl0 79wandevs=et0 80