libnvram.so strcpy getpid memcpy perror puts system fprintf acosNvramConfig_get acosNvramConfig_invmatch strncmp acosNvramConfig_match fopen memset fclose strcmp sprintf stderr acosNvramConfig_save fwrite acosNvramConfig_set __errno_location strlen libacos_shared.so strtok_r wwan_status_match fgets sleep getPidFromName stricmp strcat strstr signal killallPPP sscanf fread set_wwan_status sys_uptime checkUSBModemReset getWAN_Type exit atoi stristr libgcc_s.so.1 abort __deregister_frame_info _Jv_RegisterClasses __register_frame_info libnat.so libpthread.so.0 _init _fini libcal.so CAL_terminating CAL_resetModem CAL_checkNtwkRegistered CAL_initModem CAL_getISP CAL_setAttach CAL_setAPN CAL_getNetworkMode CAL_selectNWMode CAL_phoneOn CAL_getModel CAL_getAllModems CAL_setPIN CAL_setOEM CAL_getRSSI CAL_getManufacturer CAL_getIMEI CAL_isLock CAL_setDebug CAL_setISP CAL_private_generic_reset CAL_getAvailableNetworks CAL_hso_retrieve_IP CAL_getPINStatus CAL_hso_disconnect CAL_setUnlock CAL_getFirmwareRevision CAL_getModemType CAL_getIMSI CAL_disconnect CAL_setPPPMode CAL_isAttached CAL_resetUSB CAL_connect libc.so.0 __uClibc_main daemon _edata __bss_start __bss_start__ __bss_end__ __end__ _end
p ` D h l t | create_gsm_chat_script wwan_probe wwan_callBackfn wwan_hso_ip_up ps | grep '%s' > /tmp/process_cald /tmp/process_cald grep D cald wwan_port_scan_enable echo "system up time = %lu mins" >> /tmp/resetUSB.log wwan_runtime_manuf wwan_runtime_model Sierra 880 881 875 killall -SIGQUIT usbheartbeat Not Connected wwan_apn NO APN Entered wwan_pdp_type PDP-IP PPP-PDP wwan_cid wwan_runtime_modem_type wwan_country_setting wwan_isp_setting wwan_runtime_fw_ver /tmp/ppp/peers/gsm_chat w "Micromax" E160X AC329U AC327U ATDT OK 'AT+CGDCONT=1,"%s","%s"' MMX353G %s %s %d Micromax MMX353G wwan.c %s %s %d Micromax MTK2 +CGMM: MTK2 OK %s*99# OK %s*99*# OK %s*99***%d# MMX353W CONNECT \c /tmp/ppp/peers/cdma_chat wwan_usb_detect rm -f /var/run/wwan.pid false killall mstat wwan_CPIN_reply SIM PIN2 wwan_pin2_code There is no PIN2 entry! PIN2 Required wwan_pin2_enable SIM PIN wwan_pin_code There is no PIN entry! SIM PUK2 wwan_puk2_code There is no PUK2 entry! PUK2 and New PIN Required wwan_puk2_enable SIM PUK wwan_puk_code There is no PUK entry! PUK and New PIN Required wwan_puk_enable There is a un-support CPIN response %s! SIM NOT Support wwan_cpin_error set pin status error READY ERROR PIN/PIN2/PUK/PUK2 error! PIN Number Error pin_error PUK Number Error puk_error PIN2 Number Error pin2_error PUK2 Number Error puk2_error NO SIM Card Detected other_error OK /tmp/modemInit.log E226 K3715 wwan_unlockcode wwan_lock_enable Please enter unlock code Unlock Code Required Unlock code error! Unlock Code Error firmwareVersion= %s wwan_runtime_imei wwan_mode HSDPA wwan_runtime_IMSI wwan_CAL_version Manufacturer : -%s- model : -%s- Type : -%s- IMSI : -%s- Driver version : -%s- wwan_avail_network wwan_avail_network_no wwan_ppp_unsuccess wwan_pppd_enable wwan_error echo "0" > /tmp/ppp/unsuccess echo "" > /var/log/messages modem type:%d %s %d Detecting Modem Modem detecting.... modem=NULL killall -SIGUSR1 usbheartbeat USB Device Not Support NO USB Device Attached wwan_usbtype Modem detected! EVDO USB Modem not Responding. Please eject and re-insert USB modem or power cycle. Negotiating Special case, need usb reset right now!! PINStatus= %s get pin status error SIM detect error! Samsung GT B3730 LTE mode 3G mode ifconfig wwan0 up wwan_runtime_netMode echo "0" > /tmp/modemInit.log Avail network=%s,%s wwan_runtime_isp , get available network error connection down! Re-connecting... Connecting %s%d : /proc/net/dev FILE(/proc/net/dev) open error wan1_ifname %s%lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %d wwan_runtime_rssi %s(%d) wwan_wan_name wan_proto PPP wan_ifname 10.64.64.64 wan_ipaddr 0.0.0.0 wan_netmask wan1_ipaddr wan1_netmask 255.255.255.255 wwan_auto_reconn 10.11.12.13 10.11.12.14 pppd file /tmp/ppp/options & %s%s wan_dns wan1_dns acos_service wwan_ipup wan_gateway wan_ipaddr_old wan1_gateway wan1_ipaddr_old rm -rf /var/run/wwan.pid acos_service wwan_ipdown (%d)%s,%s,%s,%s wwan_tty_port0 /tmp/ppp/options_tmp %s -- read error ttyUSB0 %s -- open error wwan_port_debug 885 312U MF626 K3565 K3570 UM175VW UM150VW UM175AL UML290 306 X080D X220L MF637 Orange MF110 MF668 MF680 XS Stick W14 XS Stick P14 DUXBURY MF636DB USB 308 MF190 MF180 iCON 7.2 ttyHS3 0505 ttyHS2 1515 ttyHS0 225 322 0431 0401 0452 0461 ttyHS5 LGE LUU-2100TI ttyACM0 Nokia MF691 K3806-Z ttyACM1 MF652 ttyUSB2 E173 AC32 Micromax 10 wwan_dodo_dns1 ms-dns %s wwan_dodo_dns2 usepeerdns /tmp/ppp/options w+ connect '/usr/sbin/chat -v -V -s -t6 -f /tmp/ppp/peers/cdma_chat' connect '/usr/sbin/chat -v -V -s -t6 -f /tmp/ppp/peers/gsm_chat' Scanning registration_status = %d SIM Network Reject SIM Network Reject, failed!! wwan_auto_roaming Disable roaming, there is no avail network, failed!! No Network Coverage There is no avail network, failed!! Attaching to Network attachConfirm = %d already attached wait for attached, start to attach for %d second wwan_lock_ntwk Avali network is %s, but the usb modem camped to %s, faile!! NO Preferred ISP Novatel Huawei Option the runtime netMode = %s SPRINT 3 BELL 4 TELUS VERIZON ALLTEL Unknown HUAWEI Neotel QUALCOMM AT&T 1xEVDO wwan_error_restart wwan_conn_manual wwan_auto_conn udhcpc -i usb0 -p /var/run/udhcpc2.pid -s /tmp/udhcpc & true pppd pppoe executed. echo %lu > /tmp/wwan_time wwan init finish, wwan_wan_type=%d -r -q -x -c daemon /var/run/wwan.pid echo "" > /tmp/at_command.log wwan_dbgLvl wwan fopen error NO modem detected!! UML290VW wwan_reconn K3565-Z 61 MF636 ROGER E372 Huawei E1820
# Connection script for Sierra Wireless GSM/UMTS modems # TIMEOUT 25 SAY 'Startinig Wireless UMTS connect script...\n' SAY '\n' ####################################### SAY 'Setting the abort string\n' SAY '\n' # Abort String ------------------------------ ABORT 'BUSY' ABORT 'NO ANSWER\r' ABORT 'RINGING\r\n\r\nRINGING' ABORT 'Username/Password Incorrect' ABORT ERROR REPORT CONNECT ####################################### SAY 'Initializing modem\n' # Modem Initialization # Connection script for Sierra Wireless GSM/UMTS modems # SAY 'Starting Wireless UMTS connect script...\n' SAY '\n' ####################################### SAY 'Setting the abort string\n' SAY '\n' # Abort String ------------------------------ ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED ABORT ERROR REPORT CONNECT ####################################### SAY 'Initializing modem\n' # Modem Initialization '' ATZ '' 'AT Q0 V1 E0 S0=0 &C1 &D2 +FCLASS=0' '' ATZ '' ATQ0 OK ATV1 OK ATE1 OK ATS0=0 OK AT&C1 OK AT&D2 '' ATZ OK AT&F OK 'ATQ0 V1 E1' OK 'AT&D2 &C1' OK AT+FCLASS=0 OK ATS0=0 '' AT OK ATS0=0 OK ATE0V1 '' AT&F&D2&C1S0=0 SAY 'Dialing...\n' # Dial the ISP, this is the PPP dial string CONNECT '' # AT$QCMIPGETP "login" name used for MobileIP, which usually matches your MIN. # AT+GSN ESN in hex # AT+GMR firmware revision and build date. # AT+CSQ first number indicates the signal strength above -109 dBm (in # 2 dBm increments). A value of 7 or higher (-95 dBm) can be # considered adequate. 31 is the max. (Possible values in # Audiovox PC5740 are 0, 7, 15, 23, 31.) # AT+CDV=*22899 Update PRL. at+cdv=*22899 | OK | Lost carrier. ####################################### ABORT 'NO DIAL TONE' ABORT ERROR ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED ####################################### # Modem Initialization '' AT OK ATZ ####################################### OK ATD#777 CONNECT '' '' AT&F SAY 'Setting Modem\n' OK 'AT+IPR=115200' OK 'ATS0=0' TIMEOUT 15 ####################################### SAY '\n' SAY 'Setting PDP type and APN\n' # Access Point Name (APN) # Incorrect APN or CGDCONT can often cause errors in connection. # Below are a bunch of different popular APNs ####################################### SAY '\n' SAY 'Dialing...\n' # Dial the ISP, this is the PPP dial string
GCC: (GNU) 3.3.2 20031005 (Debian prerelease) GCC: (Buildroot 2012.02) 4.5.3
.shstrtab .interp .hash .dynsym .dynstr .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame .init_array .fini_array .jcr .dynamic .got .data .bss .comment .ARM.attributes
p ` D h l t | create_gsm_chat_script wwan_probe wwan_callBackfn wwan_hso_ip_up ps | grep '%s' > /tmp/process_cald /tmp/process_cald grep D cald wwan_port_scan_enable echo "system up time = %lu mins" >> /tmp/resetUSB.log wwan_runtime_manuf wwan_runtime_model Sierra 880 881 875 killall -SIGQUIT usbheartbeat Not Connected wwan_apn NO APN Entered wwan_pdp_type PDP-IP PPP-PDP wwan_cid wwan_runtime_modem_type wwan_country_setting wwan_isp_setting wwan_runtime_fw_ver /tmp/ppp/peers/gsm_chat w "Micromax" E160X AC329U AC327U ATDT OK 'AT+CGDCONT=1,"%s","%s"' MMX353G %s %s %d Micromax MMX353G wwan.c %s %s %d Micromax MTK2 +CGMM: MTK2 OK %s*99# OK %s*99*# OK %s*99***%d# MMX353W CONNECT \c /tmp/ppp/peers/cdma_chat wwan_usb_detect rm -f /var/run/wwan.pid false killall mstat wwan_CPIN_reply SIM PIN2 wwan_pin2_code There is no PIN2 entry! PIN2 Required wwan_pin2_enable SIM PIN wwan_pin_code There is no PIN entry! SIM PUK2 wwan_puk2_code There is no PUK2 entry! PUK2 and New PIN Required wwan_puk2_enable SIM PUK wwan_puk_code There is no PUK entry! PUK and New PIN Required wwan_puk_enable There is a un-support CPIN response %s! SIM NOT Support wwan_cpin_error set pin status error READY ERROR PIN/PIN2/PUK/PUK2 error! PIN Number Error pin_error PUK Number Error puk_error PIN2 Number Error pin2_error PUK2 Number Error puk2_error NO SIM Card Detected other_error OK /tmp/modemInit.log E226 K3715 wwan_unlockcode wwan_lock_enable Please enter unlock code Unlock Code Required Unlock code error! Unlock Code Error firmwareVersion= %s wwan_runtime_imei wwan_mode HSDPA wwan_runtime_IMSI wwan_CAL_version Manufacturer : -%s- model : -%s- Type : -%s- IMSI : -%s- Driver version : -%s- wwan_avail_network wwan_avail_network_no wwan_ppp_unsuccess wwan_pppd_enable wwan_error echo "0" > /tmp/ppp/unsuccess echo "" > /var/log/messages modem type:%d %s %d Detecting Modem Modem detecting.... modem=NULL killall -SIGUSR1 usbheartbeat USB Device Not Support NO USB Device Attached wwan_usbtype Modem detected! EVDO USB Modem not Responding. Please eject and re-insert USB modem or power cycle. Negotiating Special case, need usb reset right now!! PINStatus= %s get pin status error SIM detect error! Samsung GT B3730 LTE mode 3G mode ifconfig wwan0 up wwan_runtime_netMode echo "0" > /tmp/modemInit.log Avail network=%s,%s wwan_runtime_isp , get available network error connection down! Re-connecting... Connecting %s%d : /proc/net/dev FILE(/proc/net/dev) open error wan1_ifname %s%lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %d wwan_runtime_rssi %s(%d) wwan_wan_name wan_proto PPP wan_ifname 10.64.64.64 wan_ipaddr 0.0.0.0 wan_netmask wan1_ipaddr wan1_netmask 255.255.255.255 wwan_auto_reconn 10.11.12.13 10.11.12.14 pppd file /tmp/ppp/options & %s%s wan_dns wan1_dns acos_service wwan_ipup wan_gateway wan_ipaddr_old wan1_gateway wan1_ipaddr_old rm -rf /var/run/wwan.pid acos_service wwan_ipdown (%d)%s,%s,%s,%s wwan_tty_port0 /tmp/ppp/options_tmp %s -- read error ttyUSB0 %s -- open error wwan_port_debug 885 312U MF626 K3565 K3570 UM175VW UM150VW UM175AL UML290 306 X080D X220L MF637 Orange MF110 MF668 MF680 XS Stick W14 XS Stick P14 DUXBURY MF636DB USB 308 MF190 MF180 iCON 7.2 ttyHS3 0505 ttyHS2 1515 ttyHS0 225 322 0431 0401 0452 0461 ttyHS5 LGE LUU-2100TI ttyACM0 Nokia MF691 K3806-Z ttyACM1 MF652 ttyUSB2 E173 AC32 Micromax 10 wwan_dodo_dns1 ms-dns %s wwan_dodo_dns2 usepeerdns /tmp/ppp/options w+ connect '/usr/sbin/chat -v -V -s -t6 -f /tmp/ppp/peers/cdma_chat' connect '/usr/sbin/chat -v -V -s -t6 -f /tmp/ppp/peers/gsm_chat' Scanning registration_status = %d SIM Network Reject SIM Network Reject, failed!! wwan_auto_roaming Disable roaming, there is no avail network, failed!! No Network Coverage There is no avail network, failed!! Attaching to Network attachConfirm = %d already attached wait for attached, start to attach for %d second wwan_lock_ntwk Avali network is %s, but the usb modem camped to %s, faile!! NO Preferred ISP Novatel Huawei Option the runtime netMode = %s SPRINT 3 BELL 4 TELUS VERIZON ALLTEL Unknown HUAWEI Neotel QUALCOMM AT&T 1xEVDO wwan_error_restart wwan_conn_manual wwan_auto_conn udhcpc -i usb0 -p /var/run/udhcpc2.pid -s /tmp/udhcpc & true pppd pppoe executed. echo %lu > /tmp/wwan_time wwan init finish, wwan_wan_type=%d -r -q -x -c daemon /var/run/wwan.pid echo "" > /tmp/at_command.log wwan_dbgLvl wwan fopen error NO modem detected!! UML290VW wwan_reconn K3565-Z 61 MF636 ROGER E372 Huawei E1820
# Connection script for Sierra Wireless GSM/UMTS modems # TIMEOUT 25 SAY 'Startinig Wireless UMTS connect script...\n' SAY '\n' ####################################### SAY 'Setting the abort string\n' SAY '\n' # Abort String ------------------------------ ABORT 'BUSY' ABORT 'NO ANSWER\r' ABORT 'RINGING\r\n\r\nRINGING' ABORT 'Username/Password Incorrect' ABORT ERROR REPORT CONNECT ####################################### SAY 'Initializing modem\n' # Modem Initialization # Connection script for Sierra Wireless GSM/UMTS modems # SAY 'Starting Wireless UMTS connect script...\n' SAY '\n' ####################################### SAY 'Setting the abort string\n' SAY '\n' # Abort String ------------------------------ ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED ABORT ERROR REPORT CONNECT ####################################### SAY 'Initializing modem\n' # Modem Initialization '' ATZ '' 'AT Q0 V1 E0 S0=0 &C1 &D2 +FCLASS=0' '' ATZ '' ATQ0 OK ATV1 OK ATE1 OK ATS0=0 OK AT&C1 OK AT&D2 '' ATZ OK AT&F OK 'ATQ0 V1 E1' OK 'AT&D2 &C1' OK AT+FCLASS=0 OK ATS0=0 '' AT OK ATS0=0 OK ATE0V1 '' AT&F&D2&C1S0=0 SAY 'Dialing...\n' # Dial the ISP, this is the PPP dial string CONNECT '' # AT$QCMIPGETP "login" name used for MobileIP, which usually matches your MIN. # AT+GSN ESN in hex # AT+GMR firmware revision and build date. # AT+CSQ first number indicates the signal strength above -109 dBm (in # 2 dBm increments). A value of 7 or higher (-95 dBm) can be # considered adequate. 31 is the max. (Possible values in # Audiovox PC5740 are 0, 7, 15, 23, 31.) # AT+CDV=*22899 Update PRL. at+cdv=*22899 | OK | Lost carrier. ####################################### ABORT 'NO DIAL TONE' ABORT ERROR ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED ####################################### # Modem Initialization '' AT OK ATZ ####################################### OK ATD#777 CONNECT '' '' AT&F SAY 'Setting Modem\n' OK 'AT+IPR=115200' OK 'ATS0=0' TIMEOUT 15 ####################################### SAY '\n' SAY 'Setting PDP type and APN\n' # Access Point Name (APN) # Incorrect APN or CGDCONT can often cause errors in connection. # Below are a bunch of different popular APNs ####################################### SAY '\n' SAY 'Dialing...\n' # Dial the ISP, this is the PPP dial string
GCC: (GNU) 3.3.2 20031005 (Debian prerelease) GCC: (Buildroot 2012.02) 4.5.3
.shstrtab .interp .hash .dynsym .dynstr .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame .init_array .fini_array .jcr .dynamic .got .data .bss .comment .ARM.attributes