libnvram.so strcpy ioctl snprintf memcpy perror system malloc strtoul acosNvramConfig_read fprintf kill acosNvramConfig_get acosNvramConfig_invmatch strncmp strncpy acosNvramConfig_match fopen memset fclose strcmp sprintf acosNvramConfig_setPAParam_RU2 stderr acosNvramConfig_save fwrite acosNvramConfig_set __errno_location strlen free libacos_shared.so bd_read_pin get_eth_link_status bd_read_ssid waitpid getTokens strtok_r create_ipv6_addr bd_read_passphrase bd_read_eth_mac openvpn_make_config_file inet_pton get_inet6_link_local_info bd_read_sn wait_for_ppp_to_terminate route_add usleep fgets abEnableLanEthernetPort load_rf_param preset_wan_routes hasWWAN compress_ipv6_addr dup2 acosnat_set_features feof support_hsdpa itoa bd_read_board_id mac_addr_to_interface_id is_ru_region getPidFromName check_upgrade_status strncasecmp MD5Final chmod single_session_pppoe_check strtol __ctype_tolower_loc del_routes agApi_feature_get ifconfig strcat inet_addr add_routes is_single_session_pppoe _eval strstr arp_reply_control signal set_led_settings unlink strtok memcmp fork sscanf getReservedAddr fread ambitSetLogFilter inet_aton send_wps_led_cmd set_eth_mac getinst_ipv6rd_rules_shared inet_ntoa abDisableLanEthernetPort sys_uptime get_6rd_auto_params GetUnitFromIfname MD5Init pptpd_make_config_file strcspn openvpn_set_lan_ip need_to_run_telnetenabled MD5Update __ctype_b_loc getWAN_Type stat sys_set_timezone iqos_service is_china_specific_support exit inet_ntop atoi stristr strspn ambitWriteLog bd_read_sku_info isValidIpAddr strchr fputs setsid agApi_feature_set route_del ether_atoe convert_wlan_params libgcc_s.so.1 abort __deregister_frame_info _Jv_RegisterClasses __register_frame_info libnat.so putchar agApi_natWanIfCnt agApi_natLanUnhook agApi_fbcp_add_whitelist agApi_natLanHook agApi_wwanStatusSet agApi_fbcp_del_whitelist agApi_fwEchoRespSet agApi_natDisable agApi_natSetWanLanConflictFlag agApi_natEnable agApi_fwPolicyAdd agApi_SetDayLightSaving agApi_natUnhook agApi_fbcp_clear_whitelist agApi_natSetInboundFilter agApi_setDeviceListenPort agApi_fbcp_add_mac agApi_setDropAlgPacket agApi_natPptpWanHook agApi_fwDMZRuleSet agApi_PptpdEnable agApi_PptpdDisable agApi_natSipAlgCfg acosNat_DoConnRecovery agApi_natHook agApi_fbcp_set_enable agApi_fwPolicyClear agApi_fbcp_del_mac agApi_natSetRegion agApi_setAlg agApi_fbcp_clear_mac libc.so.0 unsetenv mknod getenv tolower remove settimeofday getpgrp rename strrchr reboot fseek isupper sethostname sync execv __uClibc_main symlink tcgetattr mount fgetc fputc access tcsetattr mkdir tcsetpgrp _edata __bss_start __bss_start__ __bss_end__ __end__ _end
Release version : %s 802.11ac Dual Band Gigabit Wireless Router R7000 %s/%s/%s U12H270T00 V1.0.7.12 1.2.5 Time : %s %s Mar 3 2017 11:44:04 %s/%s%s%s /tmp/uboot.info cannot open file Boot code version Boot code version : %c%s d` t` d` h` main \` H: tM \` , main Reading board data... %02X:%02X:%02X:%02X:%02X:%02X lan_hwaddr et0macaddr enable_extender_mode 1:macaddr pci/1/1/macaddr enable_sta_mode bridge_interface default LAN MAC! pci/2/1/macaddr et1macaddr ipv6ready wan_hwaddr2 wan_hwaddr_sel wan_hwaddr wan1_hwaddr_sel wan1_hwaddr1 board_id wps_device_pin 12345670 WSC/UUID WSC_UUID 0x%s WSC UUID: %s wps_uuid sku_name sku_lang load_defaults wla_region time_zone NA wlg_mode HT80 wlg_channel 153 wlg_temp_channel 14 44 wla_preset_ssid wla_preset_passphrase wla_ssid_2 wla_passphrase_2 wla_secu_type_2 WPA2-PSK wla_ssid wla_passphrase wla_secu_type wl_wps_config_state wl1_wps_config_state wl0_wps_config_state lan_wps_oob disabled allow_registrar_config wlg_preset_ssid wlg_preset_passphrase wlg_ssid_2 wlg_passphrase_2 wlg_secu_type_2 wlg_ssid wlg_passphrase wlg_secu_type no_hsdpa JP pppoe_dod pppoe2_dod /proc/mtd mtd%d: brcmnand /dev/mtdblock%d /tmp/media/nand jffs2 Mount nflash MTD jffs2 partition %s to %s failed /tmp/register.txt Input Register Info Error! {"id":"readycloud","state":"%s","owner":"%s","password":"%s"} mkdir /dev/net cp /dev/tun /dev/net cp /opt/broken/register.txt /tmp/ leafp2p_run leafp2p_username ############ leafp2p_run = %d username=%d tmp_register_name reg_cloud_tmp_user reg_cloud_tmp_pwd cat /tmp/register.txt | PATH_INFO=/api/services/readycloud REQUEST_METHOD=PUT /opt/broken/readycloud_control.cgi igmp_proxying_enable qos_enable wla_repeater wlg_repeater qos_port iptv_enabled et robowr 0x0 0x8 0x1c et robowr 0x0 0xb 0x7 et robowr 0x2 0x0 0x80 et robowr 0x02 0x03 0x02 et robowr 0x34 0x6 0x11 et robowr 0xffff 0xfe 0x3 et robowr 0x0 0x8 0x0 et robowr 0x0 0xb 0x6 et robowr 0x2 0x0 0x0 et robowr 0x02 0x03 0x01 et robowr 0x34 0x6 0x10 et robowr 0xffff 0xfe 0x1 et robowr 0xffff 0xfe 0x2 et robowr 0xffff 0xfe 0x0 wl0_radio led_settings turn_off gpio %d 0 gpio %d 1 wl1_radio ap_mode_lan_disable read_bd wireless_restart >/dev/console WW gui_region Russian RU ### %s:%d Set Russian Power! ### %s:%d Set Normal Power! dome_led_status ON OFF acos_init upgrage_to_4_30 wan_proto pppoe l2tp l2tp_dod pptp pptp_dod telnet_on enable_vlan nvram set vlan1ports="4 3 2 1 5*" nvram set vlan2ports="0 5u" nvram set vlan1hwname="et0" nvram set vlan2hwname="et0" static wan_ipaddr 0.0.0.0 static_if_status ce_dfs_ch_enable telec_dfs_ch_enable second_wan_status first_wan_status rootap_assoc rootap_assoc2 dhcpc_get_ip pre_lan_ipaddr pre_lan_netmask 255.255.255.0 wla_sche_wlanstate Enable wlg_sche_wlanstate rpt_default_state blank_state echo 2400 > /proc/sys/net/ipv4/neigh/br0/base_reachable_time echo 2400 > /proc/sys/net/ipv4/neigh/default/base_reachable_time echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter echo 1 > /proc/sys/net/ipv4/conf/all/accept_source_route restart_all_processes nvram unset arp_check_run nvram set arp_check_run=1 settimeofday echo 1 >/proc/sys/net/ipv4/ip_forward /bin/mknod -m 755 /dev/acos_nat_cli c 100 0 /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/lib/acos_nat.ko /bin/mknod -m 755 /dev/spiv6 c 101 0 /sbin/insmod /lib/module/lctserial.ko /bin/mknod -m 755 /dev/ttyACM0 c 166 0 /bin/mknod -m 755 /dev/ttyACM1 c 166 1 /bin/mknod -m 755 /dev/ttyACM2 c 166 2 /bin/mknod -m 755 /dev/ttyUSB0 c 188 0 /bin/mknod -m 755 /dev/ttyUSB1 c 188 1 /bin/mknod -m 755 /dev/ttyUSB2 c 188 2 /bin/mknod -m 755 /dev/ttyUSB3 c 188 3 /bin/mknod -m 755 /dev/ttyUSB4 c 188 4 /bin/mknod -m 755 /dev/ttyUSB5 c 188 5 /bin/mknod -m 755 /dev/ttyUSB6 c 188 6 /bin/mknod -m 755 /dev/ttyUSB7 c 188 7 /bin/mknod -m 755 /dev/ttyUSB8 c 188 8 /bin/mknod -m 755 /dev/ttyUSB9 c 188 9 echo "7 4 1 2" > /proc/sys/kernel/printk echo "0" > /tmp/usb_detect.log usb_detect wwan_usbtype log_filter 65535 /tmp/opendns.flag fopen(opendns.flag) ParentalControl ParentalCtrl_MAC_ID_tbl /tmp/opendns.tbl fopen(opendns.tbl) /tmp/opendns_auth.tbl fopen(opendns_auth.tbl) /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/lib/opendns.ko /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/ufsd/jnl.ko /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/ufsd/ufsd.ko lanip_changed en_blink dis_blink uptime %lu day%s %lu hour%s %lu minute%s %lu second%s routerinfo burnpin burnethermac burnboardid burnsn burnssid burn5gssid burnpass burn5gpass burnsku ledup gpio 2 0 gpio 3 0 gpio 8 0 gpio 9 0 gpio 12 0 gpio 13 0 gpio 14 1 gpio 15 1 gpio 17 0 gpio 18 0 et robowr 0x0 0x18 0x1ff et robowr 0x0 0x1a 0x0 leddown gpio 2 1 gpio 3 1 gpio 8 1 gpio 9 1 gpio 12 1 gpio 13 1 gpio 14 0 gpio 15 0 gpio 17 1 gpio 18 1 et robowr 0x0 0x18 0x0 acos_service FIREWALL_PORT_%d qos_bw_uplink_ookla qos_bw_downlink_ookla schedule_daylightadjust start ipv6_proto passthrough Japanese enable_ap_mode rmmod ipv6_spi.ko insmod ipv6_spi.ko working_mode="ap" insmod ipv6_spi.ko afpd_enable friendly_name %s "%s" %s echo > /proc/sys/kernel/hostname /tmp/avahi /tmp/avahi/services /var/run/avahi-daemon /tmp/config cp -f /usr/config/netatalk/AppleVolumes.default /tmp/netatalk cp -f /usr/config/avahi/services/http.service /tmp/avahi/services cp -f /usr/config/avahi/services/smbd.service /tmp/avahi/services /bin/nice -n 19 /usr/sbin/afpd -F /etc/netatalk/afpd.conf -P /var/run/afpd.pid -c 7 > /dev/null 2>&1 avahi-daemon -f /etc/avahi/avahi-daemon.conf -D /tmp/openvpn /dev/mtdblock18 ###################################mount openvpn mtdblock18 mkdir /tmp/media/nand /bin/mount -t usbdevfs none /proc/bus/usb usb_mount mount usbdevfs failed insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/core/usbcore.ko insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/host/ehci-hcd.ko insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/host/ohci-hcd.ko insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/storage/usb-storage.ko mknod /dev/usblp0 -m 666 c 180 0 mknod /dev/usblp1 -m 666 c 180 1 mknod /dev/usblp2 -m 666 c 180 2 mknod /dev/usblp3 -m 666 c 180 3 mknod /dev/usblp4 -m 666 c 180 4 mknod /dev/usblp5 -m 666 c 180 5 mknod /dev/usblp6 -m 666 c 180 6 mknod /dev/usblp7 -m 666 c 180 7 mknod /dev/usblp8 -m 666 c 180 8 mknod /dev/usblp9 -m 666 c 180 9 insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usbprinter/GPL_NetUSB.ko echo "0x2077,0xFFFF" > /tmp/kcodes.lst echo "0x2001,0xFFFF" >> /tmp/kcodes.lst echo "0x1c9e,0xFFFF" >> /tmp/kcodes.lst echo "0x2020,0xFFFF" >> /tmp/kcodes.lst insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usbprinter/NetUSB.ko kcReadConfigFile=/tmp/kcodes.lst /bin/mount -t usbfs none /proc/bus/usb /tmp/mnt mkdir /tmp/mnt failed usb_disk_max_part /tmp/mnt/not_approved%d %s failed /dev/sd%c /dev/sd%c%d Unable to create %s /tmp/mnt/usb%d /tmp/mnt/usb%d/part%d /tmp/usb_vol_name /tmp/samba /tmp/samba/share /tmp/samba/private /tmp/shares echo 2097152 > /proc/sys/net/core/wmem_max echo 2097152 > /proc/sys/net/core/rmem_max echo "4096 65536 2097152" > /proc/sys/net/ipv4/tcp_wmem echo "4096 65536 2097152" > /proc/sys/net/ipv4/tcp_rmem echo 400 > /proc/sys/net/core/netdev_max_backlog KC_BONJOUR & KC_PRINT & echo "" >/tmp/usb_devices wwan_wan_name HSDPA ADSL cald usbheartbeat wwan_soft_reset wwan_transition wan_ifname wan0_ifname wwan_wan_type %s-%d wwan_type:%s wan_type:%d dslcheck 6to4 echo 1 > /proc/sys/net/ipv6/conf/br0/dad_transmits echo 1 > /proc/sys/net/ipv6/conf/eth0/dad_transmits ifconfig br0 down ifconfig eth0 down ifconfig br0 up ifconfig eth0 up ifconfig eth0 add 3ffe:501:ffff:101:2%02x:%02xff:fe%02x:%02x%02x/64 ifconfig br0 add 3ffe:501:ffff:100:2%02x:%02xff:fe%02x:%02x%02x/64 echo 1 > /proc/sys/net/ipv6/conf/all/forwarding echo 1 > /proc/sys/net/ipv6/conf/all/accept_source_route echo 1 > /proc/sys/net/ipv6/conf/br0/accept_source_route echo 1 > /proc/sys/net/ipv6/conf/eth0/accept_source_route ifconfig eth0 99.99.99.99 run_mld mld & dhcp6s_readylogo dhcp6c_readylogo wpsd gpio 0 1 rcagent_log_level leafp2p_debug leafp2p_service_0 RouterRemote,0,1,1,0,1,6:135,6:136,6:137,6:138,6:139,6:445,6:548,17:135,17:136,17:137,17:138,17:139,17:445,17:548 leafp2p_connection_method_type leafp2p_peer_router_type queryusb killall xagent /opt/xagent/run-xagent.sh ++++++ run-xagnet.sh ++++++ stop restart_wan start_wwan /tmp/ppp/pppstart_cmd1 %s -- read error wwan_runtime_status Connecting pppd file /tmp/ppp/options unit 1& echo %lu > /tmp/wwan_time wwan_pppd_enable stop_dsl restart_wwan wwan & start_ripd stop_ripd delStaRoute wan_restart restart_ipv6 6rd restart_dhcp6s killall dhcp6s killall radvd restart_dhcpd rm -rf /tmp/udhcpd.leases start_dhcpd stop_dhcpd start_dhcpc stop_dhcpc restart_br_dhcp_filter restart_br_dns_hijack usage: rc [start|stop|restart|start_ripd|stop_ripd] ip-up ip-down udhcpc dhcp6c_up dhcp6c_down ipv6-conntab autoconfig_wan_up autoconfig_wan_down ipv6_drop_all_pkt EnableTrafficRedirect EditAuthorizedList EditURLWhiteList lanup landown nvconfig firewall api internet system dlna test_hack %s %d support_hsdpa=%d Unknown action: %s! gpio pot mac_record ntp_record a a a a a a a a a b b $b Caught signal %d Sending SIGTERM to all processes Sending SIGKILL to all processes Quit Illegal instruction Trace trap Abort Bus error Floating exception User-defined signal 1 Segmentation fault Broken pipe Terminated Power failure Bad system call del_ns \d \d o \d _ \d $_ \d o \d ,_ \d o \d @n \d o o e add_ns [Internet disconnected] n j wan_up wan_up restart_wan start_wan tmp/resolv0.conf tmp/resolv1.conf /tmp/resolv2.conf r+ fopen /tmp/resolvx.conf /tmp/resolv.tmp fopen /tmp/resolv.tmp nameserver wan_dns_sel wan2_dns1 wan2_dns wan_dns1 wan_dns wan%d_dns1 wan%d_dns nameserver %s %s(%d) failover mode /tmp/resolv.conf -%d killall dnsmasq /tmp/resolv_session2.conf /dev/acos_nat_cli error setting ipaddress %08x. wan1_hwaddr2 wan1_hwaddr ppp0_hwaddr emf_enable vlan2 br0 eth0 wan1_ifname wan1_ipaddr wan1_proto PPP Idle wwan_avail_network --- wwan_runtime_fw_ver wwan_runtime_imei wwan_runtime_rssi wwan_runtime_isp /tmp/ppp /sbin/acos_service /tmp/ppp/ip-up /tmp/ppp/ip-down /tmp/udhcpc wan1_ipaddr_old wan1_netmask wan1_gateway wan1_dns -H adsl down wan0_ipaddr_old wan_ipaddr_old wan_netmask wan_gateway wan0_ipaddr wan0_netmask wan0_gateway wan0_dns system_name /var/run/udhcpc%d.pid -i -p -s Start DHCP client daemon XXXX /proc/net/route %s %08x %08x %d %d %d %d %08x Enter add_ns wan2_dns_sel %s %d runs here static_pptp_enable pptp_dhcp_dns static_l2tp_enable l2tp_dhcp_dns static_pppoe_enable pptp_gateway l2tp_gateway_ip %s %d dns=%s pppoe_dhcp_dns fixed ipv6_pri_dns ipv6_sec_dns /tmp/resolv0.conf w+ /tmp/resolv1.conf resolv.conf 127.0.0.1 255.255.255.255 Bypass special address '%s' cp /tmp/resolv0.conf /tmp/resolv.conf cp /tmp/resolv2.conf /tmp/resolv.conf /tmp/resolv.ppp wan2_gateway lan_ifname pptp_serv_ip /tmp/ppp/pptpSrvIp route del %s gw %s route add default dev ppp0 pptp_user_netmask route add -host %s gw %s l2tp_serv_ip /tmp/ppp/l2tpSrvIp l2tp_user_netmask dhcp /tmp/auto_disconn_log [Internet disconnected] 24hr automatic disconnection. pppoa wan%d_ wanXXXXXXXXXX_ pppoe_policy_num pppoe_policy%d - TCP TCP/UDP NULL, qos_bw_enable /tmp/tc_cmd TC is active. %s is NOT exist!! TC is NOT active!! %s %s %d wan_ifname=%s index=%d network.c %s %d wan_proto acosnat_ctf_disable bs_enable traffic_enable video_qos_enable access_control_mode acosnat_nat4lanonly_disable broadstream_iqos_enable route delete default Failover mode route add default dev %s route add -host %s dev %s route add default gw %s %s(%d) add default route for WAN1 call add_ns wan_ifname=%s /var/run/ddnsd.pid wla_wds_enable wla_wds_mode wlg_wds_enable wlg_wds_mode killall -SIGWINCH httpd [Internet connected] IP address: %s, killall -SIGUSR2 check_fw %s: IP addr changed! (%s->%s) do arp_check! killall -SIGUSR1 arp_check %s: IP addr NOT changed! (%s->%s) do arp_check! rip_enable ipv6rd_auto_mode pptpd_enable ifconfig brctl addif %s(%d) /tmp/ppp/peers /usr/sbin/pppoecd /tmp/pppoecd2 bpa /var/run/udhcpc0.pid bpa_dod bpa_monitor run_test pppoe_user_ip pppoe_localnetmask %s: Unknown protocol (%s)! TE_TEST lan_proto ap_dyn_ip --> bring the wan_if up. ifconfig %s %s netmask %s --> %s /bin/sh rm -rf bpalogin pppoecd ntpclient d` P@ \d d` P@ \d s 4q \d s \d dd tun0 start_openvpn \d \d \d \d @ \d Ly \d y [ \d z (z \d \d \d d| stop_broadstream_iqos ipv6rd_wan_dns_sel autoconfig auto ipv6_proto_auto Invalid prefix length (%d)! check_db swresetd /sbin/tmd -t 5 -p /tmp/tmsync.pid & /tmp/udhcpd.leases arp_enable arp -s %s %s %d.%d.%d.%d /tmp/udhcpd.conf pidfile /tmp/udhcpd.pid dhcp_start start %s dhcp_end end %s interface %s remaining yes lease_file /tmp/udhcpd.leases option subnet %s ifconfig br0 | grep -n Bcast > /tmp/br0_ip.txt /tmp/br0_ip.txt inet addr option dns %s option router %s lan_lease option lease %s dhcp_wins %s_wins option wins %s dhcp_domain %s_domain option domain %s /tmp/udhcpd_resrv.conf dhcp_resrv_ip dhcp_resrv_mac lanip_setup_changed udhcpd -h -n -c -N -r -u root cat /tmp/openvpn_log_tun | grep 'TUN/TAP device' | tail -1 | cut -b 25- | cut -d ' ' -f 5 > /tmp/_tundevname openvpnActive ntp_is_synced [OPENVPN] NTP sync time failed. Get correct system time then reconnect. /tmp/openvpn/ca.crt cp -f /usr/local/share/foxconn_ca/ca.crt /tmp/openvpn/ca.crt /tmp/openvpn/client.crt cp -f /usr/local/share/foxconn_ca/client.crt /tmp/openvpn/client.crt /tmp/openvpn/client.key cp -f /usr/local/share/foxconn_ca/client.key /tmp/openvpn/client.key /tmp/openvpn/dh1024.pem cp -f /usr/local/share/foxconn_ca/dh1024.pem /tmp/openvpn/dh1024.pem /tmp/openvpn/server.crt cp -f /usr/local/share/foxconn_ca/server.crt /tmp/openvpn/server.crt /tmp/openvpn/server.key cp -f /usr/local/share/foxconn_ca/server.key /tmp/openvpn/server.key openvpn_service_port_tun openvpn_service_port %s: Error setting echo response mknod -m0600 /dev/net/tun c 10 200 /usr/local/sbin/openvpn /tmp/server_tap.conf & /usr/local/sbin/openvpn /tmp/server_tun.conf & brctl addif br0 tap0 ifconfig tap0 0.0.0.0 promisc up rm -rf /tmp/openvpn_zip mkdir /tmp/openvpn_zip cp /tmp/client1.ovpn /tmp/openvpn/ca.crt /tmp/openvpn/client.crt /tmp/openvpn/client.key /tmp/client2.conf /tmp/openvpn_zip ps | grep openvpn | grep server | cut -d ' ' -f 1 | xargs kill -9 killall gproxy bt_igmp_enable gproxy bt_igmp& gproxy & check_kwilt & /sbin/pptpd -c /tmp/ppp/pptpd.conf /var/tmpp/pptpd.pid rm -rf /var/tmpp/pptpd.pid /var/run/dlnad.pid /tmp/dlnad.conf dlnad & httpd -S -E /usr/sbin/ca.pem /usr/sbin/httpsd.pem & upnpd killall upnp upnp_turn_on killall -9 timesync rm -rf /var/run/timesync.pid /usr/sbin/timesync /sbin/ntpclient & lld2d dnsRedirectReplyd static_route rip_multicast /tmp/M.conf /tmp/zebra.conf /tmp/ripd.conf rip_dir router rip no router rip redistribute kernel redistribute connected redistribute static network %s rip_version ip rip send version 2 ip rip send version %s ip rip receive version %s distribute-list private%s out %s : access-list private%s deny %s/%d access-list private%s deny %s/8 access-list private%s deny %s/16 access-list private%s deny %s/24 access-list private%s permit any no ip rip send version access-list private%s deny any distribute-list active%s in %s access-list active%s deny any ppp0 telnetenabled heartbeat wlanconfigd /proc/net/if_inet6 %4s%4s%4s%4s%4s%4s%4s%4s %08x %02x %02x %02x %20s fe8 %s:%s:%s:%s:%s:%s:%s:%s lan_ipv6_link_local_addr lan_ipv6_link_local_addr_short /tmp/radvd.conf interface %s { AdvSendAdvert on; RA_AdvCurHopLimit AdvCurHopLimit %s; RA_MinRtrAdvInterval MinRtrAdvInterval %s; RA_MaxRtrAdvInterval MaxRtrAdvInterval %s; RA_AdvManagedFlag AdvManagedFlag %s; RA_AdvOtherConfigFlag AdvOtherConfigFlag %s; RA_AdvDefaultLifetime AdvDefaultLifetime %s; RA_AdvReachableTime AdvReachableTime %s; RA_AdvRetransTimer AdvRetransTimer %s; RA_AdvDefaultPreference AdvDefaultPreference %s; AdvHomeAgentFlag off; AdvLinkMTU 1500; prefix %s/%s { 3ffe:501:ffff:100:: RA_AdvOnLink AdvOnLink %s; RA_AdvAutonomous AdvAutonomous %s; RA_AdvValidLifetime AdvValidLifetime %s; RA_AdvPreferredLifetime AdvPreferredLifetime %s; }; }; 3ffe:501:ffff:101:: }; radvd -d 1 -C %s & AdvDefaultPreference low; ipv6rd_wan_mtu AdvLinkMTU %s; ipv6_lan_ipaddr ipv6_6to4_sla_id prefix 0:0:0:%x::/64 { AdvRouterAddr off; Base6to4Interface %s; ipv6_lan_length prefix %s { RA_use_dynamic_lifetime RA_AdvValidLifetime_from_IAPD RA_AdvPreferredLifetime_from_IAPD radvd_lan_obsolete_ipaddr radvd_lan_obsolete_ipaddr_length AdvOnLink on; AdvAutonomous off; lan_ipv6_link_local_addr1 RDNSS %s { AdvRDNSSPreference 0; AdvRDNSSLifetime %lu; /proc/sys/net/ipv6/conf/all/forwarding radvd -d 1 -D -C %s & /tmp/dhcp6s.conf /tmp/server6.leases option dns_servers %s ; ipv6_sip_servers option sip_servers %s ; ipv6_ntp_servers option ntp_servers %s ; lan_dhcpsv6_lifetime renew-time %lu ; rebind-time %lu ; prefer-life-time %s ; valid-life-time %s ; allow rapid-commit ; lan_dhcpsv6_enable send information-only; link LAN { pool { 1000 2000 range %s to %s/%s; killall check_fw killall arp_check killall mevent sh /etc/init.d/remote.sh start sh /etc/init.d/brokerd.sh start sh /etc/init.d/leafp2p.sh start sh /etc/init.d/remote.sh stop sh /etc/init.d/brokerd.sh stop sh /etc/init.d/leafp2p.sh stop ap_mode_cur sta_band_cur 2.4G 5G ap_band_cur /sbin/rmmod br_dhcp_filter 1>/dev/null 2>&1 /sbin/insmod br_dhcp_filter filter_dhcpd_if=%d filter_dhcpc_if=%d filter_arp_if=%d eth_bind_band /sbin/rmmod br_dns_hijack 1>/dev/null 2>&1 /sbin/insmod br_dns_hijack support_mode=3 /sbin/insmod br_dns_hijack support_mode=%s client_if=%d hd_idle_period hd_idle_debug hd-idle -i %d %s -l /tmp/hd-idle.log killall hd-idle autoipd sche_tmp_set scheact /usr/sbin/email [Initialized, firmware version: %s%s%s] Init log send failed et robowr 0xFFFF 0xFC 0x1 et robowr 0xFFFF 0xFC 0x0 /usr/sbin/acl_logd & /usr/sbin/checkDullWan Trend iqos support..... /tmp/media/nand/TMDPI/backup /tmp/media/nand/TMDPI/update /tmp/media/nand/TMDPI/archive mkdir -p /tmp/media/nand/TMDPI/backup mkdir -p /tmp/media/nand/TMDPI/update mkdir -p /tmp/media/nand/TMDPI/archive start_iqos %s(%d) stop iQoS service stop_iqos ripd zebra -d -f ddnsd pptpd check_kwilt gproxy tfmeter readstats [Internet disconnected] static routes overlap! /tmp/udhcpc0.expires /tmp/delDhcpOptionRoute route del -net %s netmask %s route add -net %s netmask %s gw %s route -n > /tmp/formerRouteTbl /tmp/formerRouteTbl 127.0.0.0 %s %s %s %s %*s echo 'route del -net %s netmask %s' >> /tmp/delDhcpOptionRoute & interface apmode_gateway fopen /tmp/resolv.conf pppoe_localgateway dhcp_serv_ip pptp_user_ip l2tp_user_ip wwan_wan_ipaddr wwan_wan_netmask wwan_wan_gateway wwan_wan_dns wwan_wan_wins br2 wan2_proto subnet router ap_dyn_dns apmode_dns1 killall zeroconf 2>/dev/null killall -SIGUSR2 autoipd 2>/dev/null rfc3442 /tmp/udhcpc.routes sroute /tmp/udhcpc.routes2 wan_domain wan_lease [PPTP] gateway from dhcp: (%s) [PPPoE] gateway from dhcp: (%s) [L2TP] gateway from dhcp: (%s) [PPTP] nameserver from dhcp: %s [PPPoE] nameserver from dhcp: %s [L2TP] nameserver from dhcp: %s /tmp/ppp/dhcpIp user_ip_addr %s gateway_addr %s netmask_addr %s /sbin/acos_service stop_dhcpd pptp_dhcp_enabled pppoe_dhcp_enabled l2tp_dhcp_enabled Wins: Got IP of WAN by DHCP client. dhcp_offer_ip wan_wins hostname serverid wan2_ifname %d.%d.%d.128 %d.%d.%d.200 wan2_ipaddr wan2_netmask both killall -SIGHUP httpd deconfig bound renew ipup_main ipup_main (s IFNAME %s(%d)wan_ifname=%s, unit=%d /tmp/ppp/link. IPLOCAL 10.64.64.64 IPREMOTE 169.254.1.1 DNS1 10.11.12.13 10.11.12.14 killall pppd %s(%d) pppd killed. rm -f /var/run/ppp1.pid DNS2 %s%s /tmp/ppp/pppoe_session pppoe_server_mac pppoe_session_id %s %d wan_proto=%s, unit=%d /tmp/ppp/linkupstart. %lu pppoe_flet_sel fletenable /tmp/ppp/no_ppp2 /sbin/pppd file /tmp/ppp/peers/options & 2nd pppd started. killall pppcheck rm -rf /var/run/pppcheck.pid killall wwan rm -rf /var/run/wwan.pid wwan_runtime_manuf Sierra Ericsson wwan_mode wwan_recover_done -1 /usr/sbin/pppcheck & IDLE_TIMEOUT [Internet idle-timeout] wan2_ipaddr_old /tmp/ppp/pppoe2_session pppoe2_server_mac pppoe2_session_id Not Connected wwan_conn_manual wwan_last_rssi : pptp_username pptp_passwd wan_mtu /tmp/ppp/pptpIp pptp_serv_ip %s pptp_user_ip 0.0.0.0 pptp_user_ip %s pptp_gateway_ip %s pptp_user_netmask 0.0.0.0 pptp_user_netmask %s /tmp/ppp/options defaultroute pty 'pptp %s --nolaunchpppd' noauth user "%s" mtu %d mru %d holdoff 5 persist lcp-echo-interval 10 lcp-echo-failure 3 disconnect 'killall pptp' maxfail 0 connect echo pptp_localip pptp_ip_sel ipcp-accept-local %s: ipcp-accept-remote noipdefault ktune default-asyncmap noaccomp nopcomp noccp novj nobsdcomp nodeflate lock usepeerdns pptp_idletime idle %d demand /tmp/ppp/pap-secrets /tmp/ppp/pap-screts "%s" * "%s" * /tmp/ppp/chap-secrets /tmp/ppp/chap-screts /dev/ptys0 Unable to create /dev/ptys0 /dev/ttys0 Unable to create /dev/ttys0 Dynamic IP by DHCP client. Fork could not create child process (%d)!! /usr/sbin/udhcpc Static IP by user defined. 255.0.0.0 pppd executed successfully. (%d) Failed to execute pppd. (%d) wan_ dmz_init start_HSDPA_nat fw_dmz_enab dmz_ipaddr %s: Error setting DMZ. fw_dmz_ip4 %s %s %d index=%d acos_fw.c sip_alg_cfg nat_inbound_filtering pptp_passthrough PPTP l2tp_passthrough L2TP ipsec_passthrough IPSEC IKE mp_start_nat: %s not a ppp interface. : wwan_runtime_model wwan_runtime_modem_type wwan_runtime_IMSI wwan_CAL_version wwan_avail_network_no wwan_pin2_enable wwan_puk_enable wwan_puk2_enable wwan_ppp_unsuccess wwan_lock_enable wwan_error echo "0" > /tmp/ppp/unsuccess echo "" > /var/log/messages /var/lock echo "1" > /tmp/modemInit.log wwan_servicename wwan_apn VirginBroadband wwan_user_name guest wwan_password wwan_ppp_max_unsuccess wwan_cid wwan_mtu /tmp/ppp/options_tmp unit 1 nodetach user %s password %s /dev/ttyUSB0 115200 debug wwan_reconn ppp1_idletime ppp1_dod logfd 2 ipcp-max-failure 30 maxfail 10 novjccomp refuse-chap refuse-mschap refuse-mschap-v2 refuse-eap receive-all noproxyarp ppp_dbg debug kdebug 1 debug_level %d crtscts kdebug 1 %s %s %s%d pppoe_username pppoe_passwd pppoe_servicename pppoe_localip /tmp/ppp/pppstart_cmd%d pppd unit 0 rp_pppoe_service "%s" %s defaultroute noauth user "%s" mtu %d mru %d holdoff 10 persist lcp-echo-interval 20 lcp-echo-failure 3 maxfail 0 ipcp-accept-local %s: ipcp-accept-remote noipdefault ktune default-asyncmap nodetach noaccomp nopcomp noccp novj nobsdcomp nodeflate usepeerdns pppoe_idletime idle %d demand debug kdebug 1 debug_level %d [dbg]-- (%s) tmp/ppp/ipv6-up tmp/ppp/ipv6-down pty 'pppoecd -I %s -S %s' pty 'pppoecd -I %s' disconnect 'killall pppoecd 2> /dev/null' disconnect 'killall pppoecd' pppoe_ip_sel +ipv6 ipv6 , unit 0 pap-max-authreq 3 chap-max-challenge 3 pppoe2_username pppoe2_passwd pppoe2_servicename /tmp/ppp/peers/options pty '/tmp/pppoecd2 -I %s -S %s -P 1' pty '/tmp/pppoecd2 -I %s -P 1' lcp-echo-interval 20 disconnect 'killall pppoecd2 2> /dev/null' pppoe2_localip pppoe2_idletime a+ /dev/ptys1 Unable to create /dev/ptys1 /dev/ttys1 Unable to create /dev/ttys1 usage: nvconfig [get name] [set name value] ... get usage: firewall [addport if_name app_name protocol port_number] [delport if_name app_name protocol port_number] ... addport delport usage: api <operation> 0.01 usage: internet <operation> <object> [<app name> <value>] ether eth0 active ether ppp0 active connection connection_table ; %s %d object does not exist! Invalid value! usage: system <operation> <object> dev_name model_name R7000 serial_number usage: dlna <operation> <object> status dlna_enable active inactive database-path /tmp/minidlna.conf db_dir= failed to read DLNA config file "/tmp/minidlna.conf" : l2tp_user_name l2tp_user_passwd l2tp_conn_id /dev/ptys2 Unable to create /dev/ptys2 /dev/ttys2 Unable to create /dev/ttys2 /tmp/ppp/l2tpIp l2tp_serv_ip %s l2tp_user_ip 0.0.0.0 l2tp_user_ip %s l2tp_gateway_ip %s l2tp_user_netmask 0.0.0.0 l2tp_user_netmask %s /tmp/l2tp/ /tmp/l2tp/l2tpd.conf [lac %s] lns = %s name = %s ppp debug = yes pppoptfile = /tmp/ppp/options length bit = yes require authentication = yes pty 'l2tpd -D -c /tmp/l2tp/l2tpd.conf' disconnect 'killall l2tpd' lcp-restart 5 ipcp-restart 5 l2tp_localip l2tp_ip_sel linkname 0 l2tp_idle_time /tmp/l2tp/l2tpd.info Failed to execute l2tpd. (%d) ipv6_auto_mode start_dhcp6c start_dhcp6c_iapd Down ipv6_auto_type the Internet port is not connected Detecting... /tmp/wan_ipv6_ra_detect.result /tmp/wan_dhcp6c /tmp/wan_dhcp6c_iapd /tmp/dhcp6c.conf request domain-name-servers; solicit-only; rtsol -w & dhcp6c_debug %s: Unable to open '%s', errno=%d dhcp6c -c %s -D -f %s & dhcp6c -c %s %s killall dhcp6c 6to4 Tunnel DHCP Auto Config Pass Through IPv6 Auto detect as 6to4! Retry in 10 seconds! %s: IPv6 auto detect result: %d radvd_lan_new_ipaddr radvd_lan_new_ipaddr_length ifconfig %s add %s/%s ipv6_wan_ipaddr ipv6_wan_length ipv6_wan_ipaddr_old ipv6_wan_length_old autoconfig_wan ipv6_wan_gateway route -A inet6 add ::/0 gw %s ipv6_interfaceid_enable ipv6_interface_id ipv6_lan_ipaddr_old ipv6_lan_length_old wla_wlanstate wl down wlg_wlanstate wl -i eth2 down killall -9 radvd wl up wl -i eth2 up fw_rsp_ping ifconfig %s del %s/%s route -A inet6 del ::/0 dhcp6c_iana_only command = '%s' ipv6_proto_pppoe killall -SIGUSR1 rtsol 64.64.64.64 2002:%02X%02X:%02X%02X:%04X:%s ifconfig sit0 up ipv6_6to4_relay ipv6_6to4_router ipv6_static_ip route -A inet6 add 2000::/3 gw ::%s dev sit0 ipv6_6to4_tunnel route -A inet6 del 2000::/3 dev sit0 ifconfig sit0 down %1d %x: ipv6_6rd_status ipv6_6rd_tunnel wan8_ipaddr %d; DHCP/Auto Config fe80:: ifconfig %s del %s/%d ifconfig %s add %s/%d user-class user_config_file; /tmp/dhcp6c_user.conf ipv6_system_name user_class %s dhcp6c -c %s -u %s %s rtsol -d -I %s iapd-only; request prefix-delegation; /tmp/ppp/options.bak demand idle persist /tmp/client6.leases1 killall rtsol killall IPv6-relay killall pppdv6 ifconfig %s del %s/64 ifconfig %s add %s/64 ipv6_proto_override Passthrough pppd file /tmp/ppp/options IPv6-relay -C %s -S %s /tmp/dhcp6c_rfc3315.conf iana-only; /tmp/dhcp6c_rfc3646_dns.conf /tmp/dhcp6c_rfc3646_domain.conf request domain-list; /tmp/dhcp6c_rfc3736_dns.conf information-only; /tmp/dhcp6c_rfc3736_domain.conf /tmp/dhcp6c_rfc3736_dns_domain.conf ipv6_pppoe_mode : 8 rtsol -w -I %s & route -A inet6 add ::/0 dev ppp1 %s: IPv6 PPPOE detect result: %d ipv6_pppoe_username ipv6_pppoe_passwd ipv6_pppoe_servicename /tmp/ppp/pppoev6_session pppoev6_server_mac pppoev6_session_id /tmp/ppp/optionsv6 pty 'pppoecdv6 -I %s -S %s -P 1' pty 'pppoecdv6 -I %s -P 1' disconnect 'killall pppoecdv6 2> /dev/null' disconnect 'killall pppoecdv6' noip ipv6 , /tmp/ppp/pap-secrets-ipv6 /tmp/ppp/chap-secrets-ipv6 pppdv6 executed successfully. (%d) Failed to execute pppdv6. (%d) echo 'ipv6up-main argv[1]=%s, argv[2]=%s' > /dev/console echo 'ipv6down-main' > /dev/console ipv6_dump_conn_table ipv6_spi_mode ipv6_spi_lan_hook ipv6_spi_wan_hook ipv6_drop_all_packet ipv6_enable_wan_ping /dev/spiv6 Can't open device file: %s [%s]:ioctl_set_msg failed:%d Usage: EditURLWhiteList <operation> <URL> <match type> e.g.: EditURLWhiteList add http://www.facebook.com/ prefix EditURLWhiteList add http://www.facebook.com/some_url_after_the_domain_name full EditURLWhiteList delete http://www.facebook.com/ prefix EditURLWhiteList show EditURLWhiteList clear Usage: EditAuthorizedList <operation> <mac> e.g.: EditAuthorizedList add 001122334455 EditAuthorizedList delete 001122334455 EditAuthorizedList show EditAuthorizedList clear Usage: EnableTrafficRedirect <enable> [port] [guest wireless only] [url_ext] e.g.: EnableTrafficRedirect 1 8000 1 EnableTrafficRedirect 1 8000 0 "/fbwifi/forward" EnableTrafficRedirect 0 add delete 000000000000 %02x%02x%02x%02x%02x%02x [FBwifi] MAC address %02X:%02X:%02X:%02X:%02X:%02X, /dev/aglog whitelist too long! invalid url! full http://
H $ | x Z H
GCC: (GNU) 3.3.2 20031005 (Debian prerelease) GCC: (Buildroot 2012.02) 4.5.3
.shstrtab .interp .hash .dynsym .dynstr .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame .init_array .fini_array .jcr .dynamic .got .data .bss .comment .ARM.attributes
Release version : %s 802.11ac Dual Band Gigabit Wireless Router R7000 %s/%s/%s U12H270T00 V1.0.7.12 1.2.5 Time : %s %s Mar 3 2017 11:44:04 %s/%s%s%s /tmp/uboot.info cannot open file Boot code version Boot code version : %c%s d` t` d` h` main \` H: tM \` , main Reading board data... %02X:%02X:%02X:%02X:%02X:%02X lan_hwaddr et0macaddr enable_extender_mode 1:macaddr pci/1/1/macaddr enable_sta_mode bridge_interface default LAN MAC! pci/2/1/macaddr et1macaddr ipv6ready wan_hwaddr2 wan_hwaddr_sel wan_hwaddr wan1_hwaddr_sel wan1_hwaddr1 board_id wps_device_pin 12345670 WSC/UUID WSC_UUID 0x%s WSC UUID: %s wps_uuid sku_name sku_lang load_defaults wla_region time_zone NA wlg_mode HT80 wlg_channel 153 wlg_temp_channel 14 44 wla_preset_ssid wla_preset_passphrase wla_ssid_2 wla_passphrase_2 wla_secu_type_2 WPA2-PSK wla_ssid wla_passphrase wla_secu_type wl_wps_config_state wl1_wps_config_state wl0_wps_config_state lan_wps_oob disabled allow_registrar_config wlg_preset_ssid wlg_preset_passphrase wlg_ssid_2 wlg_passphrase_2 wlg_secu_type_2 wlg_ssid wlg_passphrase wlg_secu_type no_hsdpa JP pppoe_dod pppoe2_dod /proc/mtd mtd%d: brcmnand /dev/mtdblock%d /tmp/media/nand jffs2 Mount nflash MTD jffs2 partition %s to %s failed /tmp/register.txt Input Register Info Error! {"id":"readycloud","state":"%s","owner":"%s","password":"%s"} mkdir /dev/net cp /dev/tun /dev/net cp /opt/broken/register.txt /tmp/ leafp2p_run leafp2p_username ############ leafp2p_run = %d username=%d tmp_register_name reg_cloud_tmp_user reg_cloud_tmp_pwd cat /tmp/register.txt | PATH_INFO=/api/services/readycloud REQUEST_METHOD=PUT /opt/broken/readycloud_control.cgi igmp_proxying_enable qos_enable wla_repeater wlg_repeater qos_port iptv_enabled et robowr 0x0 0x8 0x1c et robowr 0x0 0xb 0x7 et robowr 0x2 0x0 0x80 et robowr 0x02 0x03 0x02 et robowr 0x34 0x6 0x11 et robowr 0xffff 0xfe 0x3 et robowr 0x0 0x8 0x0 et robowr 0x0 0xb 0x6 et robowr 0x2 0x0 0x0 et robowr 0x02 0x03 0x01 et robowr 0x34 0x6 0x10 et robowr 0xffff 0xfe 0x1 et robowr 0xffff 0xfe 0x2 et robowr 0xffff 0xfe 0x0 wl0_radio led_settings turn_off gpio %d 0 gpio %d 1 wl1_radio ap_mode_lan_disable read_bd wireless_restart >/dev/console WW gui_region Russian RU ### %s:%d Set Russian Power! ### %s:%d Set Normal Power! dome_led_status ON OFF acos_init upgrage_to_4_30 wan_proto pppoe l2tp l2tp_dod pptp pptp_dod telnet_on enable_vlan nvram set vlan1ports="4 3 2 1 5*" nvram set vlan2ports="0 5u" nvram set vlan1hwname="et0" nvram set vlan2hwname="et0" static wan_ipaddr 0.0.0.0 static_if_status ce_dfs_ch_enable telec_dfs_ch_enable second_wan_status first_wan_status rootap_assoc rootap_assoc2 dhcpc_get_ip pre_lan_ipaddr pre_lan_netmask 255.255.255.0 wla_sche_wlanstate Enable wlg_sche_wlanstate rpt_default_state blank_state echo 2400 > /proc/sys/net/ipv4/neigh/br0/base_reachable_time echo 2400 > /proc/sys/net/ipv4/neigh/default/base_reachable_time echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter echo 1 > /proc/sys/net/ipv4/conf/all/accept_source_route restart_all_processes nvram unset arp_check_run nvram set arp_check_run=1 settimeofday echo 1 >/proc/sys/net/ipv4/ip_forward /bin/mknod -m 755 /dev/acos_nat_cli c 100 0 /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/lib/acos_nat.ko /bin/mknod -m 755 /dev/spiv6 c 101 0 /sbin/insmod /lib/module/lctserial.ko /bin/mknod -m 755 /dev/ttyACM0 c 166 0 /bin/mknod -m 755 /dev/ttyACM1 c 166 1 /bin/mknod -m 755 /dev/ttyACM2 c 166 2 /bin/mknod -m 755 /dev/ttyUSB0 c 188 0 /bin/mknod -m 755 /dev/ttyUSB1 c 188 1 /bin/mknod -m 755 /dev/ttyUSB2 c 188 2 /bin/mknod -m 755 /dev/ttyUSB3 c 188 3 /bin/mknod -m 755 /dev/ttyUSB4 c 188 4 /bin/mknod -m 755 /dev/ttyUSB5 c 188 5 /bin/mknod -m 755 /dev/ttyUSB6 c 188 6 /bin/mknod -m 755 /dev/ttyUSB7 c 188 7 /bin/mknod -m 755 /dev/ttyUSB8 c 188 8 /bin/mknod -m 755 /dev/ttyUSB9 c 188 9 echo "7 4 1 2" > /proc/sys/kernel/printk echo "0" > /tmp/usb_detect.log usb_detect wwan_usbtype log_filter 65535 /tmp/opendns.flag fopen(opendns.flag) ParentalControl ParentalCtrl_MAC_ID_tbl /tmp/opendns.tbl fopen(opendns.tbl) /tmp/opendns_auth.tbl fopen(opendns_auth.tbl) /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/lib/opendns.ko /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/ufsd/jnl.ko /sbin/insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/ufsd/ufsd.ko lanip_changed en_blink dis_blink uptime %lu day%s %lu hour%s %lu minute%s %lu second%s routerinfo burnpin burnethermac burnboardid burnsn burnssid burn5gssid burnpass burn5gpass burnsku ledup gpio 2 0 gpio 3 0 gpio 8 0 gpio 9 0 gpio 12 0 gpio 13 0 gpio 14 1 gpio 15 1 gpio 17 0 gpio 18 0 et robowr 0x0 0x18 0x1ff et robowr 0x0 0x1a 0x0 leddown gpio 2 1 gpio 3 1 gpio 8 1 gpio 9 1 gpio 12 1 gpio 13 1 gpio 14 0 gpio 15 0 gpio 17 1 gpio 18 1 et robowr 0x0 0x18 0x0 acos_service FIREWALL_PORT_%d qos_bw_uplink_ookla qos_bw_downlink_ookla schedule_daylightadjust start ipv6_proto passthrough Japanese enable_ap_mode rmmod ipv6_spi.ko insmod ipv6_spi.ko working_mode="ap" insmod ipv6_spi.ko afpd_enable friendly_name %s "%s" %s echo > /proc/sys/kernel/hostname /tmp/avahi /tmp/avahi/services /var/run/avahi-daemon /tmp/config cp -f /usr/config/netatalk/AppleVolumes.default /tmp/netatalk cp -f /usr/config/avahi/services/http.service /tmp/avahi/services cp -f /usr/config/avahi/services/smbd.service /tmp/avahi/services /bin/nice -n 19 /usr/sbin/afpd -F /etc/netatalk/afpd.conf -P /var/run/afpd.pid -c 7 > /dev/null 2>&1 avahi-daemon -f /etc/avahi/avahi-daemon.conf -D /tmp/openvpn /dev/mtdblock18 ###################################mount openvpn mtdblock18 mkdir /tmp/media/nand /bin/mount -t usbdevfs none /proc/bus/usb usb_mount mount usbdevfs failed insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/core/usbcore.ko insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/host/ehci-hcd.ko insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/host/ohci-hcd.ko insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/storage/usb-storage.ko mknod /dev/usblp0 -m 666 c 180 0 mknod /dev/usblp1 -m 666 c 180 1 mknod /dev/usblp2 -m 666 c 180 2 mknod /dev/usblp3 -m 666 c 180 3 mknod /dev/usblp4 -m 666 c 180 4 mknod /dev/usblp5 -m 666 c 180 5 mknod /dev/usblp6 -m 666 c 180 6 mknod /dev/usblp7 -m 666 c 180 7 mknod /dev/usblp8 -m 666 c 180 8 mknod /dev/usblp9 -m 666 c 180 9 insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usbprinter/GPL_NetUSB.ko echo "0x2077,0xFFFF" > /tmp/kcodes.lst echo "0x2001,0xFFFF" >> /tmp/kcodes.lst echo "0x1c9e,0xFFFF" >> /tmp/kcodes.lst echo "0x2020,0xFFFF" >> /tmp/kcodes.lst insmod /lib/modules/2.6.36.4brcmarm+/kernel/drivers/usbprinter/NetUSB.ko kcReadConfigFile=/tmp/kcodes.lst /bin/mount -t usbfs none /proc/bus/usb /tmp/mnt mkdir /tmp/mnt failed usb_disk_max_part /tmp/mnt/not_approved%d %s failed /dev/sd%c /dev/sd%c%d Unable to create %s /tmp/mnt/usb%d /tmp/mnt/usb%d/part%d /tmp/usb_vol_name /tmp/samba /tmp/samba/share /tmp/samba/private /tmp/shares echo 2097152 > /proc/sys/net/core/wmem_max echo 2097152 > /proc/sys/net/core/rmem_max echo "4096 65536 2097152" > /proc/sys/net/ipv4/tcp_wmem echo "4096 65536 2097152" > /proc/sys/net/ipv4/tcp_rmem echo 400 > /proc/sys/net/core/netdev_max_backlog KC_BONJOUR & KC_PRINT & echo "" >/tmp/usb_devices wwan_wan_name HSDPA ADSL cald usbheartbeat wwan_soft_reset wwan_transition wan_ifname wan0_ifname wwan_wan_type %s-%d wwan_type:%s wan_type:%d dslcheck 6to4 echo 1 > /proc/sys/net/ipv6/conf/br0/dad_transmits echo 1 > /proc/sys/net/ipv6/conf/eth0/dad_transmits ifconfig br0 down ifconfig eth0 down ifconfig br0 up ifconfig eth0 up ifconfig eth0 add 3ffe:501:ffff:101:2%02x:%02xff:fe%02x:%02x%02x/64 ifconfig br0 add 3ffe:501:ffff:100:2%02x:%02xff:fe%02x:%02x%02x/64 echo 1 > /proc/sys/net/ipv6/conf/all/forwarding echo 1 > /proc/sys/net/ipv6/conf/all/accept_source_route echo 1 > /proc/sys/net/ipv6/conf/br0/accept_source_route echo 1 > /proc/sys/net/ipv6/conf/eth0/accept_source_route ifconfig eth0 99.99.99.99 run_mld mld & dhcp6s_readylogo dhcp6c_readylogo wpsd gpio 0 1 rcagent_log_level leafp2p_debug leafp2p_service_0 RouterRemote,0,1,1,0,1,6:135,6:136,6:137,6:138,6:139,6:445,6:548,17:135,17:136,17:137,17:138,17:139,17:445,17:548 leafp2p_connection_method_type leafp2p_peer_router_type queryusb killall xagent /opt/xagent/run-xagent.sh ++++++ run-xagnet.sh ++++++ stop restart_wan start_wwan /tmp/ppp/pppstart_cmd1 %s -- read error wwan_runtime_status Connecting pppd file /tmp/ppp/options unit 1& echo %lu > /tmp/wwan_time wwan_pppd_enable stop_dsl restart_wwan wwan & start_ripd stop_ripd delStaRoute wan_restart restart_ipv6 6rd restart_dhcp6s killall dhcp6s killall radvd restart_dhcpd rm -rf /tmp/udhcpd.leases start_dhcpd stop_dhcpd start_dhcpc stop_dhcpc restart_br_dhcp_filter restart_br_dns_hijack usage: rc [start|stop|restart|start_ripd|stop_ripd] ip-up ip-down udhcpc dhcp6c_up dhcp6c_down ipv6-conntab autoconfig_wan_up autoconfig_wan_down ipv6_drop_all_pkt EnableTrafficRedirect EditAuthorizedList EditURLWhiteList lanup landown nvconfig firewall api internet system dlna test_hack %s %d support_hsdpa=%d Unknown action: %s! gpio pot mac_record ntp_record a a a a a a a a a b b $b Caught signal %d Sending SIGTERM to all processes Sending SIGKILL to all processes Quit Illegal instruction Trace trap Abort Bus error Floating exception User-defined signal 1 Segmentation fault Broken pipe Terminated Power failure Bad system call del_ns \d \d o \d _ \d $_ \d o \d ,_ \d o \d @n \d o o e add_ns [Internet disconnected] n j wan_up wan_up restart_wan start_wan tmp/resolv0.conf tmp/resolv1.conf /tmp/resolv2.conf r+ fopen /tmp/resolvx.conf /tmp/resolv.tmp fopen /tmp/resolv.tmp nameserver wan_dns_sel wan2_dns1 wan2_dns wan_dns1 wan_dns wan%d_dns1 wan%d_dns nameserver %s %s(%d) failover mode /tmp/resolv.conf -%d killall dnsmasq /tmp/resolv_session2.conf /dev/acos_nat_cli error setting ipaddress %08x. wan1_hwaddr2 wan1_hwaddr ppp0_hwaddr emf_enable vlan2 br0 eth0 wan1_ifname wan1_ipaddr wan1_proto PPP Idle wwan_avail_network --- wwan_runtime_fw_ver wwan_runtime_imei wwan_runtime_rssi wwan_runtime_isp /tmp/ppp /sbin/acos_service /tmp/ppp/ip-up /tmp/ppp/ip-down /tmp/udhcpc wan1_ipaddr_old wan1_netmask wan1_gateway wan1_dns -H adsl down wan0_ipaddr_old wan_ipaddr_old wan_netmask wan_gateway wan0_ipaddr wan0_netmask wan0_gateway wan0_dns system_name /var/run/udhcpc%d.pid -i -p -s Start DHCP client daemon XXXX /proc/net/route %s %08x %08x %d %d %d %d %08x Enter add_ns wan2_dns_sel %s %d runs here static_pptp_enable pptp_dhcp_dns static_l2tp_enable l2tp_dhcp_dns static_pppoe_enable pptp_gateway l2tp_gateway_ip %s %d dns=%s pppoe_dhcp_dns fixed ipv6_pri_dns ipv6_sec_dns /tmp/resolv0.conf w+ /tmp/resolv1.conf resolv.conf 127.0.0.1 255.255.255.255 Bypass special address '%s' cp /tmp/resolv0.conf /tmp/resolv.conf cp /tmp/resolv2.conf /tmp/resolv.conf /tmp/resolv.ppp wan2_gateway lan_ifname pptp_serv_ip /tmp/ppp/pptpSrvIp route del %s gw %s route add default dev ppp0 pptp_user_netmask route add -host %s gw %s l2tp_serv_ip /tmp/ppp/l2tpSrvIp l2tp_user_netmask dhcp /tmp/auto_disconn_log [Internet disconnected] 24hr automatic disconnection. pppoa wan%d_ wanXXXXXXXXXX_ pppoe_policy_num pppoe_policy%d - TCP TCP/UDP NULL, qos_bw_enable /tmp/tc_cmd TC is active. %s is NOT exist!! TC is NOT active!! %s %s %d wan_ifname=%s index=%d network.c %s %d wan_proto acosnat_ctf_disable bs_enable traffic_enable video_qos_enable access_control_mode acosnat_nat4lanonly_disable broadstream_iqos_enable route delete default Failover mode route add default dev %s route add -host %s dev %s route add default gw %s %s(%d) add default route for WAN1 call add_ns wan_ifname=%s /var/run/ddnsd.pid wla_wds_enable wla_wds_mode wlg_wds_enable wlg_wds_mode killall -SIGWINCH httpd [Internet connected] IP address: %s, killall -SIGUSR2 check_fw %s: IP addr changed! (%s->%s) do arp_check! killall -SIGUSR1 arp_check %s: IP addr NOT changed! (%s->%s) do arp_check! rip_enable ipv6rd_auto_mode pptpd_enable ifconfig brctl addif %s(%d) /tmp/ppp/peers /usr/sbin/pppoecd /tmp/pppoecd2 bpa /var/run/udhcpc0.pid bpa_dod bpa_monitor run_test pppoe_user_ip pppoe_localnetmask %s: Unknown protocol (%s)! TE_TEST lan_proto ap_dyn_ip --> bring the wan_if up. ifconfig %s %s netmask %s --> %s /bin/sh rm -rf bpalogin pppoecd ntpclient d` P@ \d d` P@ \d s 4q \d s \d dd tun0 start_openvpn \d \d \d \d @ \d Ly \d y [ \d z (z \d \d \d d| stop_broadstream_iqos ipv6rd_wan_dns_sel autoconfig auto ipv6_proto_auto Invalid prefix length (%d)! check_db swresetd /sbin/tmd -t 5 -p /tmp/tmsync.pid & /tmp/udhcpd.leases arp_enable arp -s %s %s %d.%d.%d.%d /tmp/udhcpd.conf pidfile /tmp/udhcpd.pid dhcp_start start %s dhcp_end end %s interface %s remaining yes lease_file /tmp/udhcpd.leases option subnet %s ifconfig br0 | grep -n Bcast > /tmp/br0_ip.txt /tmp/br0_ip.txt inet addr option dns %s option router %s lan_lease option lease %s dhcp_wins %s_wins option wins %s dhcp_domain %s_domain option domain %s /tmp/udhcpd_resrv.conf dhcp_resrv_ip dhcp_resrv_mac lanip_setup_changed udhcpd -h -n -c -N -r -u root cat /tmp/openvpn_log_tun | grep 'TUN/TAP device' | tail -1 | cut -b 25- | cut -d ' ' -f 5 > /tmp/_tundevname openvpnActive ntp_is_synced [OPENVPN] NTP sync time failed. Get correct system time then reconnect. /tmp/openvpn/ca.crt cp -f /usr/local/share/foxconn_ca/ca.crt /tmp/openvpn/ca.crt /tmp/openvpn/client.crt cp -f /usr/local/share/foxconn_ca/client.crt /tmp/openvpn/client.crt /tmp/openvpn/client.key cp -f /usr/local/share/foxconn_ca/client.key /tmp/openvpn/client.key /tmp/openvpn/dh1024.pem cp -f /usr/local/share/foxconn_ca/dh1024.pem /tmp/openvpn/dh1024.pem /tmp/openvpn/server.crt cp -f /usr/local/share/foxconn_ca/server.crt /tmp/openvpn/server.crt /tmp/openvpn/server.key cp -f /usr/local/share/foxconn_ca/server.key /tmp/openvpn/server.key openvpn_service_port_tun openvpn_service_port %s: Error setting echo response mknod -m0600 /dev/net/tun c 10 200 /usr/local/sbin/openvpn /tmp/server_tap.conf & /usr/local/sbin/openvpn /tmp/server_tun.conf & brctl addif br0 tap0 ifconfig tap0 0.0.0.0 promisc up rm -rf /tmp/openvpn_zip mkdir /tmp/openvpn_zip cp /tmp/client1.ovpn /tmp/openvpn/ca.crt /tmp/openvpn/client.crt /tmp/openvpn/client.key /tmp/client2.conf /tmp/openvpn_zip ps | grep openvpn | grep server | cut -d ' ' -f 1 | xargs kill -9 killall gproxy bt_igmp_enable gproxy bt_igmp& gproxy & check_kwilt & /sbin/pptpd -c /tmp/ppp/pptpd.conf /var/tmpp/pptpd.pid rm -rf /var/tmpp/pptpd.pid /var/run/dlnad.pid /tmp/dlnad.conf dlnad & httpd -S -E /usr/sbin/ca.pem /usr/sbin/httpsd.pem & upnpd killall upnp upnp_turn_on killall -9 timesync rm -rf /var/run/timesync.pid /usr/sbin/timesync /sbin/ntpclient & lld2d dnsRedirectReplyd static_route rip_multicast /tmp/M.conf /tmp/zebra.conf /tmp/ripd.conf rip_dir router rip no router rip redistribute kernel redistribute connected redistribute static network %s rip_version ip rip send version 2 ip rip send version %s ip rip receive version %s distribute-list private%s out %s : access-list private%s deny %s/%d access-list private%s deny %s/8 access-list private%s deny %s/16 access-list private%s deny %s/24 access-list private%s permit any no ip rip send version access-list private%s deny any distribute-list active%s in %s access-list active%s deny any ppp0 telnetenabled heartbeat wlanconfigd /proc/net/if_inet6 %4s%4s%4s%4s%4s%4s%4s%4s %08x %02x %02x %02x %20s fe8 %s:%s:%s:%s:%s:%s:%s:%s lan_ipv6_link_local_addr lan_ipv6_link_local_addr_short /tmp/radvd.conf interface %s { AdvSendAdvert on; RA_AdvCurHopLimit AdvCurHopLimit %s; RA_MinRtrAdvInterval MinRtrAdvInterval %s; RA_MaxRtrAdvInterval MaxRtrAdvInterval %s; RA_AdvManagedFlag AdvManagedFlag %s; RA_AdvOtherConfigFlag AdvOtherConfigFlag %s; RA_AdvDefaultLifetime AdvDefaultLifetime %s; RA_AdvReachableTime AdvReachableTime %s; RA_AdvRetransTimer AdvRetransTimer %s; RA_AdvDefaultPreference AdvDefaultPreference %s; AdvHomeAgentFlag off; AdvLinkMTU 1500; prefix %s/%s { 3ffe:501:ffff:100:: RA_AdvOnLink AdvOnLink %s; RA_AdvAutonomous AdvAutonomous %s; RA_AdvValidLifetime AdvValidLifetime %s; RA_AdvPreferredLifetime AdvPreferredLifetime %s; }; }; 3ffe:501:ffff:101:: }; radvd -d 1 -C %s & AdvDefaultPreference low; ipv6rd_wan_mtu AdvLinkMTU %s; ipv6_lan_ipaddr ipv6_6to4_sla_id prefix 0:0:0:%x::/64 { AdvRouterAddr off; Base6to4Interface %s; ipv6_lan_length prefix %s { RA_use_dynamic_lifetime RA_AdvValidLifetime_from_IAPD RA_AdvPreferredLifetime_from_IAPD radvd_lan_obsolete_ipaddr radvd_lan_obsolete_ipaddr_length AdvOnLink on; AdvAutonomous off; lan_ipv6_link_local_addr1 RDNSS %s { AdvRDNSSPreference 0; AdvRDNSSLifetime %lu; /proc/sys/net/ipv6/conf/all/forwarding radvd -d 1 -D -C %s & /tmp/dhcp6s.conf /tmp/server6.leases option dns_servers %s ; ipv6_sip_servers option sip_servers %s ; ipv6_ntp_servers option ntp_servers %s ; lan_dhcpsv6_lifetime renew-time %lu ; rebind-time %lu ; prefer-life-time %s ; valid-life-time %s ; allow rapid-commit ; lan_dhcpsv6_enable send information-only; link LAN { pool { 1000 2000 range %s to %s/%s; killall check_fw killall arp_check killall mevent sh /etc/init.d/remote.sh start sh /etc/init.d/brokerd.sh start sh /etc/init.d/leafp2p.sh start sh /etc/init.d/remote.sh stop sh /etc/init.d/brokerd.sh stop sh /etc/init.d/leafp2p.sh stop ap_mode_cur sta_band_cur 2.4G 5G ap_band_cur /sbin/rmmod br_dhcp_filter 1>/dev/null 2>&1 /sbin/insmod br_dhcp_filter filter_dhcpd_if=%d filter_dhcpc_if=%d filter_arp_if=%d eth_bind_band /sbin/rmmod br_dns_hijack 1>/dev/null 2>&1 /sbin/insmod br_dns_hijack support_mode=3 /sbin/insmod br_dns_hijack support_mode=%s client_if=%d hd_idle_period hd_idle_debug hd-idle -i %d %s -l /tmp/hd-idle.log killall hd-idle autoipd sche_tmp_set scheact /usr/sbin/email [Initialized, firmware version: %s%s%s] Init log send failed et robowr 0xFFFF 0xFC 0x1 et robowr 0xFFFF 0xFC 0x0 /usr/sbin/acl_logd & /usr/sbin/checkDullWan Trend iqos support..... /tmp/media/nand/TMDPI/backup /tmp/media/nand/TMDPI/update /tmp/media/nand/TMDPI/archive mkdir -p /tmp/media/nand/TMDPI/backup mkdir -p /tmp/media/nand/TMDPI/update mkdir -p /tmp/media/nand/TMDPI/archive start_iqos %s(%d) stop iQoS service stop_iqos ripd zebra -d -f ddnsd pptpd check_kwilt gproxy tfmeter readstats [Internet disconnected] static routes overlap! /tmp/udhcpc0.expires /tmp/delDhcpOptionRoute route del -net %s netmask %s route add -net %s netmask %s gw %s route -n > /tmp/formerRouteTbl /tmp/formerRouteTbl 127.0.0.0 %s %s %s %s %*s echo 'route del -net %s netmask %s' >> /tmp/delDhcpOptionRoute & interface apmode_gateway fopen /tmp/resolv.conf pppoe_localgateway dhcp_serv_ip pptp_user_ip l2tp_user_ip wwan_wan_ipaddr wwan_wan_netmask wwan_wan_gateway wwan_wan_dns wwan_wan_wins br2 wan2_proto subnet router ap_dyn_dns apmode_dns1 killall zeroconf 2>/dev/null killall -SIGUSR2 autoipd 2>/dev/null rfc3442 /tmp/udhcpc.routes sroute /tmp/udhcpc.routes2 wan_domain wan_lease [PPTP] gateway from dhcp: (%s) [PPPoE] gateway from dhcp: (%s) [L2TP] gateway from dhcp: (%s) [PPTP] nameserver from dhcp: %s [PPPoE] nameserver from dhcp: %s [L2TP] nameserver from dhcp: %s /tmp/ppp/dhcpIp user_ip_addr %s gateway_addr %s netmask_addr %s /sbin/acos_service stop_dhcpd pptp_dhcp_enabled pppoe_dhcp_enabled l2tp_dhcp_enabled Wins: Got IP of WAN by DHCP client. dhcp_offer_ip wan_wins hostname serverid wan2_ifname %d.%d.%d.128 %d.%d.%d.200 wan2_ipaddr wan2_netmask both killall -SIGHUP httpd deconfig bound renew ipup_main ipup_main (s IFNAME %s(%d)wan_ifname=%s, unit=%d /tmp/ppp/link. IPLOCAL 10.64.64.64 IPREMOTE 169.254.1.1 DNS1 10.11.12.13 10.11.12.14 killall pppd %s(%d) pppd killed. rm -f /var/run/ppp1.pid DNS2 %s%s /tmp/ppp/pppoe_session pppoe_server_mac pppoe_session_id %s %d wan_proto=%s, unit=%d /tmp/ppp/linkupstart. %lu pppoe_flet_sel fletenable /tmp/ppp/no_ppp2 /sbin/pppd file /tmp/ppp/peers/options & 2nd pppd started. killall pppcheck rm -rf /var/run/pppcheck.pid killall wwan rm -rf /var/run/wwan.pid wwan_runtime_manuf Sierra Ericsson wwan_mode wwan_recover_done -1 /usr/sbin/pppcheck & IDLE_TIMEOUT [Internet idle-timeout] wan2_ipaddr_old /tmp/ppp/pppoe2_session pppoe2_server_mac pppoe2_session_id Not Connected wwan_conn_manual wwan_last_rssi : pptp_username pptp_passwd wan_mtu /tmp/ppp/pptpIp pptp_serv_ip %s pptp_user_ip 0.0.0.0 pptp_user_ip %s pptp_gateway_ip %s pptp_user_netmask 0.0.0.0 pptp_user_netmask %s /tmp/ppp/options defaultroute pty 'pptp %s --nolaunchpppd' noauth user "%s" mtu %d mru %d holdoff 5 persist lcp-echo-interval 10 lcp-echo-failure 3 disconnect 'killall pptp' maxfail 0 connect echo pptp_localip pptp_ip_sel ipcp-accept-local %s: ipcp-accept-remote noipdefault ktune default-asyncmap noaccomp nopcomp noccp novj nobsdcomp nodeflate lock usepeerdns pptp_idletime idle %d demand /tmp/ppp/pap-secrets /tmp/ppp/pap-screts "%s" * "%s" * /tmp/ppp/chap-secrets /tmp/ppp/chap-screts /dev/ptys0 Unable to create /dev/ptys0 /dev/ttys0 Unable to create /dev/ttys0 Dynamic IP by DHCP client. Fork could not create child process (%d)!! /usr/sbin/udhcpc Static IP by user defined. 255.0.0.0 pppd executed successfully. (%d) Failed to execute pppd. (%d) wan_ dmz_init start_HSDPA_nat fw_dmz_enab dmz_ipaddr %s: Error setting DMZ. fw_dmz_ip4 %s %s %d index=%d acos_fw.c sip_alg_cfg nat_inbound_filtering pptp_passthrough PPTP l2tp_passthrough L2TP ipsec_passthrough IPSEC IKE mp_start_nat: %s not a ppp interface. : wwan_runtime_model wwan_runtime_modem_type wwan_runtime_IMSI wwan_CAL_version wwan_avail_network_no wwan_pin2_enable wwan_puk_enable wwan_puk2_enable wwan_ppp_unsuccess wwan_lock_enable wwan_error echo "0" > /tmp/ppp/unsuccess echo "" > /var/log/messages /var/lock echo "1" > /tmp/modemInit.log wwan_servicename wwan_apn VirginBroadband wwan_user_name guest wwan_password wwan_ppp_max_unsuccess wwan_cid wwan_mtu /tmp/ppp/options_tmp unit 1 nodetach user %s password %s /dev/ttyUSB0 115200 debug wwan_reconn ppp1_idletime ppp1_dod logfd 2 ipcp-max-failure 30 maxfail 10 novjccomp refuse-chap refuse-mschap refuse-mschap-v2 refuse-eap receive-all noproxyarp ppp_dbg debug kdebug 1 debug_level %d crtscts kdebug 1 %s %s %s%d pppoe_username pppoe_passwd pppoe_servicename pppoe_localip /tmp/ppp/pppstart_cmd%d pppd unit 0 rp_pppoe_service "%s" %s defaultroute noauth user "%s" mtu %d mru %d holdoff 10 persist lcp-echo-interval 20 lcp-echo-failure 3 maxfail 0 ipcp-accept-local %s: ipcp-accept-remote noipdefault ktune default-asyncmap nodetach noaccomp nopcomp noccp novj nobsdcomp nodeflate usepeerdns pppoe_idletime idle %d demand debug kdebug 1 debug_level %d [dbg]-- (%s) tmp/ppp/ipv6-up tmp/ppp/ipv6-down pty 'pppoecd -I %s -S %s' pty 'pppoecd -I %s' disconnect 'killall pppoecd 2> /dev/null' disconnect 'killall pppoecd' pppoe_ip_sel +ipv6 ipv6 , unit 0 pap-max-authreq 3 chap-max-challenge 3 pppoe2_username pppoe2_passwd pppoe2_servicename /tmp/ppp/peers/options pty '/tmp/pppoecd2 -I %s -S %s -P 1' pty '/tmp/pppoecd2 -I %s -P 1' lcp-echo-interval 20 disconnect 'killall pppoecd2 2> /dev/null' pppoe2_localip pppoe2_idletime a+ /dev/ptys1 Unable to create /dev/ptys1 /dev/ttys1 Unable to create /dev/ttys1 usage: nvconfig [get name] [set name value] ... get usage: firewall [addport if_name app_name protocol port_number] [delport if_name app_name protocol port_number] ... addport delport usage: api <operation> 0.01 usage: internet <operation> <object> [<app name> <value>] ether eth0 active ether ppp0 active connection connection_table ; %s %d object does not exist! Invalid value! usage: system <operation> <object> dev_name model_name R7000 serial_number usage: dlna <operation> <object> status dlna_enable active inactive database-path /tmp/minidlna.conf db_dir= failed to read DLNA config file "/tmp/minidlna.conf" : l2tp_user_name l2tp_user_passwd l2tp_conn_id /dev/ptys2 Unable to create /dev/ptys2 /dev/ttys2 Unable to create /dev/ttys2 /tmp/ppp/l2tpIp l2tp_serv_ip %s l2tp_user_ip 0.0.0.0 l2tp_user_ip %s l2tp_gateway_ip %s l2tp_user_netmask 0.0.0.0 l2tp_user_netmask %s /tmp/l2tp/ /tmp/l2tp/l2tpd.conf [lac %s] lns = %s name = %s ppp debug = yes pppoptfile = /tmp/ppp/options length bit = yes require authentication = yes pty 'l2tpd -D -c /tmp/l2tp/l2tpd.conf' disconnect 'killall l2tpd' lcp-restart 5 ipcp-restart 5 l2tp_localip l2tp_ip_sel linkname 0 l2tp_idle_time /tmp/l2tp/l2tpd.info Failed to execute l2tpd. (%d) ipv6_auto_mode start_dhcp6c start_dhcp6c_iapd Down ipv6_auto_type the Internet port is not connected Detecting... /tmp/wan_ipv6_ra_detect.result /tmp/wan_dhcp6c /tmp/wan_dhcp6c_iapd /tmp/dhcp6c.conf request domain-name-servers; solicit-only; rtsol -w & dhcp6c_debug %s: Unable to open '%s', errno=%d dhcp6c -c %s -D -f %s & dhcp6c -c %s %s killall dhcp6c 6to4 Tunnel DHCP Auto Config Pass Through IPv6 Auto detect as 6to4! Retry in 10 seconds! %s: IPv6 auto detect result: %d radvd_lan_new_ipaddr radvd_lan_new_ipaddr_length ifconfig %s add %s/%s ipv6_wan_ipaddr ipv6_wan_length ipv6_wan_ipaddr_old ipv6_wan_length_old autoconfig_wan ipv6_wan_gateway route -A inet6 add ::/0 gw %s ipv6_interfaceid_enable ipv6_interface_id ipv6_lan_ipaddr_old ipv6_lan_length_old wla_wlanstate wl down wlg_wlanstate wl -i eth2 down killall -9 radvd wl up wl -i eth2 up fw_rsp_ping ifconfig %s del %s/%s route -A inet6 del ::/0 dhcp6c_iana_only command = '%s' ipv6_proto_pppoe killall -SIGUSR1 rtsol 64.64.64.64 2002:%02X%02X:%02X%02X:%04X:%s ifconfig sit0 up ipv6_6to4_relay ipv6_6to4_router ipv6_static_ip route -A inet6 add 2000::/3 gw ::%s dev sit0 ipv6_6to4_tunnel route -A inet6 del 2000::/3 dev sit0 ifconfig sit0 down %1d %x: ipv6_6rd_status ipv6_6rd_tunnel wan8_ipaddr %d; DHCP/Auto Config fe80:: ifconfig %s del %s/%d ifconfig %s add %s/%d user-class user_config_file; /tmp/dhcp6c_user.conf ipv6_system_name user_class %s dhcp6c -c %s -u %s %s rtsol -d -I %s iapd-only; request prefix-delegation; /tmp/ppp/options.bak demand idle persist /tmp/client6.leases1 killall rtsol killall IPv6-relay killall pppdv6 ifconfig %s del %s/64 ifconfig %s add %s/64 ipv6_proto_override Passthrough pppd file /tmp/ppp/options IPv6-relay -C %s -S %s /tmp/dhcp6c_rfc3315.conf iana-only; /tmp/dhcp6c_rfc3646_dns.conf /tmp/dhcp6c_rfc3646_domain.conf request domain-list; /tmp/dhcp6c_rfc3736_dns.conf information-only; /tmp/dhcp6c_rfc3736_domain.conf /tmp/dhcp6c_rfc3736_dns_domain.conf ipv6_pppoe_mode : 8 rtsol -w -I %s & route -A inet6 add ::/0 dev ppp1 %s: IPv6 PPPOE detect result: %d ipv6_pppoe_username ipv6_pppoe_passwd ipv6_pppoe_servicename /tmp/ppp/pppoev6_session pppoev6_server_mac pppoev6_session_id /tmp/ppp/optionsv6 pty 'pppoecdv6 -I %s -S %s -P 1' pty 'pppoecdv6 -I %s -P 1' disconnect 'killall pppoecdv6 2> /dev/null' disconnect 'killall pppoecdv6' noip ipv6 , /tmp/ppp/pap-secrets-ipv6 /tmp/ppp/chap-secrets-ipv6 pppdv6 executed successfully. (%d) Failed to execute pppdv6. (%d) echo 'ipv6up-main argv[1]=%s, argv[2]=%s' > /dev/console echo 'ipv6down-main' > /dev/console ipv6_dump_conn_table ipv6_spi_mode ipv6_spi_lan_hook ipv6_spi_wan_hook ipv6_drop_all_packet ipv6_enable_wan_ping /dev/spiv6 Can't open device file: %s [%s]:ioctl_set_msg failed:%d Usage: EditURLWhiteList <operation> <URL> <match type> e.g.: EditURLWhiteList add http://www.facebook.com/ prefix EditURLWhiteList add http://www.facebook.com/some_url_after_the_domain_name full EditURLWhiteList delete http://www.facebook.com/ prefix EditURLWhiteList show EditURLWhiteList clear Usage: EditAuthorizedList <operation> <mac> e.g.: EditAuthorizedList add 001122334455 EditAuthorizedList delete 001122334455 EditAuthorizedList show EditAuthorizedList clear Usage: EnableTrafficRedirect <enable> [port] [guest wireless only] [url_ext] e.g.: EnableTrafficRedirect 1 8000 1 EnableTrafficRedirect 1 8000 0 "/fbwifi/forward" EnableTrafficRedirect 0 add delete 000000000000 %02x%02x%02x%02x%02x%02x [FBwifi] MAC address %02X:%02X:%02X:%02X:%02X:%02X, /dev/aglog whitelist too long! invalid url! full http://
H $ | x Z H
GCC: (GNU) 3.3.2 20031005 (Debian prerelease) GCC: (Buildroot 2012.02) 4.5.3
.shstrtab .interp .hash .dynsym .dynstr .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame .init_array .fini_array .jcr .dynamic .got .data .bss .comment .ARM.attributes