1/* 2 * linux/drivers/video/w100fb.c 3 * 4 * Frame Buffer Device for ATI Imageon w100 (Wallaby) 5 * 6 * Copyright (C) 2002, ATI Corp. 7 * Copyright (C) 2004-2006 Richard Purdie 8 * Copyright (c) 2005 Ian Molton 9 * Copyright (c) 2006 Alberto Mardegan 10 * 11 * Rewritten for 2.6 by Richard Purdie <rpurdie@rpsys.net> 12 * 13 * Generic platform support by Ian Molton <spyro@f2s.com> 14 * and Richard Purdie <rpurdie@rpsys.net> 15 * 16 * w32xx support by Ian Molton 17 * 18 * Hardware acceleration support by Alberto Mardegan 19 * <mardy@users.sourceforge.net> 20 * 21 * This program is free software; you can redistribute it and/or modify 22 * it under the terms of the GNU General Public License version 2 as 23 * published by the Free Software Foundation. 24 * 25 */ 26 27#include <linux/delay.h> 28#include <linux/fb.h> 29#include <linux/init.h> 30#include <linux/kernel.h> 31#include <linux/mm.h> 32#include <linux/platform_device.h> 33#include <linux/slab.h> 34#include <linux/string.h> 35#include <linux/vmalloc.h> 36#include <asm/io.h> 37#include <asm/uaccess.h> 38#include <video/w100fb.h> 39#include "w100fb.h" 40 41/* 42 * Prototypes 43 */ 44static void w100_suspend(u32 mode); 45static void w100_vsync(void); 46static void w100_hw_init(struct w100fb_par*); 47static void w100_pwm_setup(struct w100fb_par*); 48static void w100_init_clocks(struct w100fb_par*); 49static void w100_setup_memory(struct w100fb_par*); 50static void w100_init_lcd(struct w100fb_par*); 51static void w100_set_dispregs(struct w100fb_par*); 52static void w100_update_enable(void); 53static void w100_update_disable(void); 54static void calc_hsync(struct w100fb_par *par); 55static void w100_init_graphic_engine(struct w100fb_par *par); 56struct w100_pll_info *w100_get_xtal_table(unsigned int freq) __devinit; 57 58/* Pseudo palette size */ 59#define MAX_PALETTES 16 60 61#define W100_SUSPEND_EXTMEM 0 62#define W100_SUSPEND_ALL 1 63 64#define BITS_PER_PIXEL 16 65 66/* Remapped addresses for base cfg, memmapped regs and the frame buffer itself */ 67static void *remapped_base; 68static void *remapped_regs; 69static void *remapped_fbuf; 70 71#define REMAPPED_FB_LEN 0x15ffff 72 73/* This is the offset in the w100's address space we map the current 74 framebuffer memory to. We use the position of external memory as 75 we can remap internal memory to there if external isn't present. */ 76#define W100_FB_BASE MEM_EXT_BASE_VALUE 77 78 79/* 80 * Sysfs functions 81 */ 82static ssize_t flip_show(struct device *dev, struct device_attribute *attr, char *buf) 83{ 84 struct fb_info *info = dev_get_drvdata(dev); 85 struct w100fb_par *par=info->par; 86 87 return sprintf(buf, "%d\n",par->flip); 88} 89 90static ssize_t flip_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 91{ 92 unsigned int flip; 93 struct fb_info *info = dev_get_drvdata(dev); 94 struct w100fb_par *par=info->par; 95 96 flip = simple_strtoul(buf, NULL, 10); 97 98 if (flip > 0) 99 par->flip = 1; 100 else 101 par->flip = 0; 102 103 w100_update_disable(); 104 w100_set_dispregs(par); 105 w100_update_enable(); 106 107 calc_hsync(par); 108 109 return count; 110} 111 112static DEVICE_ATTR(flip, 0644, flip_show, flip_store); 113 114static ssize_t w100fb_reg_read(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 115{ 116 unsigned long regs, param; 117 regs = simple_strtoul(buf, NULL, 16); 118 param = readl(remapped_regs + regs); 119 printk("Read Register 0x%08lX: 0x%08lX\n", regs, param); 120 return count; 121} 122 123static DEVICE_ATTR(reg_read, 0200, NULL, w100fb_reg_read); 124 125static ssize_t w100fb_reg_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 126{ 127 unsigned long regs, param; 128 sscanf(buf, "%lx %lx", ®s, ¶m); 129 130 if (regs <= 0x2000) { 131 printk("Write Register 0x%08lX: 0x%08lX\n", regs, param); 132 writel(param, remapped_regs + regs); 133 } 134 135 return count; 136} 137 138static DEVICE_ATTR(reg_write, 0200, NULL, w100fb_reg_write); 139 140 141static ssize_t fastpllclk_show(struct device *dev, struct device_attribute *attr, char *buf) 142{ 143 struct fb_info *info = dev_get_drvdata(dev); 144 struct w100fb_par *par=info->par; 145 146 return sprintf(buf, "%d\n",par->fastpll_mode); 147} 148 149static ssize_t fastpllclk_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 150{ 151 struct fb_info *info = dev_get_drvdata(dev); 152 struct w100fb_par *par=info->par; 153 154 if (simple_strtoul(buf, NULL, 10) > 0) { 155 par->fastpll_mode=1; 156 printk("w100fb: Using fast system clock (if possible)\n"); 157 } else { 158 par->fastpll_mode=0; 159 printk("w100fb: Using normal system clock\n"); 160 } 161 162 w100_init_clocks(par); 163 calc_hsync(par); 164 165 return count; 166} 167 168static DEVICE_ATTR(fastpllclk, 0644, fastpllclk_show, fastpllclk_store); 169 170/* 171 * Some touchscreens need hsync information from the video driver to 172 * function correctly. We export it here. 173 */ 174unsigned long w100fb_get_hsynclen(struct device *dev) 175{ 176 struct fb_info *info = dev_get_drvdata(dev); 177 struct w100fb_par *par=info->par; 178 179 /* If display is blanked/suspended, hsync isn't active */ 180 if (par->blanked) 181 return 0; 182 else 183 return par->hsync_len; 184} 185EXPORT_SYMBOL(w100fb_get_hsynclen); 186 187static void w100fb_clear_screen(struct w100fb_par *par) 188{ 189 memset_io(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), 0, (par->xres * par->yres * BITS_PER_PIXEL/8)); 190} 191 192 193/* 194 * Set a palette value from rgb components 195 */ 196static int w100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 197 u_int trans, struct fb_info *info) 198{ 199 unsigned int val; 200 int ret = 1; 201 202 /* 203 * If greyscale is true, then we convert the RGB value 204 * to greyscale no matter what visual we are using. 205 */ 206 if (info->var.grayscale) 207 red = green = blue = (19595 * red + 38470 * green + 7471 * blue) >> 16; 208 209 /* 210 * 16-bit True Colour. We encode the RGB value 211 * according to the RGB bitfield information. 212 */ 213 if (regno < MAX_PALETTES) { 214 u32 *pal = info->pseudo_palette; 215 216 val = (red & 0xf800) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11); 217 pal[regno] = val; 218 ret = 0; 219 } 220 return ret; 221} 222 223 224/* 225 * Blank the display based on value in blank_mode 226 */ 227static int w100fb_blank(int blank_mode, struct fb_info *info) 228{ 229 struct w100fb_par *par = info->par; 230 struct w100_tg_info *tg = par->mach->tg; 231 232 switch(blank_mode) { 233 234 case FB_BLANK_NORMAL: /* Normal blanking */ 235 case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */ 236 case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */ 237 case FB_BLANK_POWERDOWN: /* Poweroff */ 238 if (par->blanked == 0) { 239 if(tg && tg->suspend) 240 tg->suspend(par); 241 par->blanked = 1; 242 } 243 break; 244 245 case FB_BLANK_UNBLANK: /* Unblanking */ 246 if (par->blanked != 0) { 247 if(tg && tg->resume) 248 tg->resume(par); 249 par->blanked = 0; 250 } 251 break; 252 } 253 return 0; 254} 255 256 257static void w100_fifo_wait(int entries) 258{ 259 union rbbm_status_u status; 260 int i; 261 262 for (i = 0; i < 2000000; i++) { 263 status.val = readl(remapped_regs + mmRBBM_STATUS); 264 if (status.f.cmdfifo_avail >= entries) 265 return; 266 udelay(1); 267 } 268 printk(KERN_ERR "w100fb: FIFO Timeout!\n"); 269} 270 271 272static int w100fb_sync(struct fb_info *info) 273{ 274 union rbbm_status_u status; 275 int i; 276 277 for (i = 0; i < 2000000; i++) { 278 status.val = readl(remapped_regs + mmRBBM_STATUS); 279 if (!status.f.gui_active) 280 return 0; 281 udelay(1); 282 } 283 printk(KERN_ERR "w100fb: Graphic engine timeout!\n"); 284 return -EBUSY; 285} 286 287 288static void w100_init_graphic_engine(struct w100fb_par *par) 289{ 290 union dp_gui_master_cntl_u gmc; 291 union dp_mix_u dp_mix; 292 union dp_datatype_u dp_datatype; 293 union dp_cntl_u dp_cntl; 294 295 w100_fifo_wait(4); 296 writel(W100_FB_BASE, remapped_regs + mmDST_OFFSET); 297 writel(par->xres, remapped_regs + mmDST_PITCH); 298 writel(W100_FB_BASE, remapped_regs + mmSRC_OFFSET); 299 writel(par->xres, remapped_regs + mmSRC_PITCH); 300 301 w100_fifo_wait(3); 302 writel(0, remapped_regs + mmSC_TOP_LEFT); 303 writel((par->yres << 16) | par->xres, remapped_regs + mmSC_BOTTOM_RIGHT); 304 writel(0x1fff1fff, remapped_regs + mmSRC_SC_BOTTOM_RIGHT); 305 306 w100_fifo_wait(4); 307 dp_cntl.val = 0; 308 dp_cntl.f.dst_x_dir = 1; 309 dp_cntl.f.dst_y_dir = 1; 310 dp_cntl.f.src_x_dir = 1; 311 dp_cntl.f.src_y_dir = 1; 312 dp_cntl.f.dst_major_x = 1; 313 dp_cntl.f.src_major_x = 1; 314 writel(dp_cntl.val, remapped_regs + mmDP_CNTL); 315 316 gmc.val = 0; 317 gmc.f.gmc_src_pitch_offset_cntl = 1; 318 gmc.f.gmc_dst_pitch_offset_cntl = 1; 319 gmc.f.gmc_src_clipping = 1; 320 gmc.f.gmc_dst_clipping = 1; 321 gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE; 322 gmc.f.gmc_dst_datatype = 3; /* from DstType_16Bpp_444 */ 323 gmc.f.gmc_src_datatype = SRC_DATATYPE_EQU_DST; 324 gmc.f.gmc_byte_pix_order = 1; 325 gmc.f.gmc_default_sel = 0; 326 gmc.f.gmc_rop3 = ROP3_SRCCOPY; 327 gmc.f.gmc_dp_src_source = DP_SRC_MEM_RECTANGULAR; 328 gmc.f.gmc_clr_cmp_fcn_dis = 1; 329 gmc.f.gmc_wr_msk_dis = 1; 330 gmc.f.gmc_dp_op = DP_OP_ROP; 331 writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL); 332 333 dp_datatype.val = dp_mix.val = 0; 334 dp_datatype.f.dp_dst_datatype = gmc.f.gmc_dst_datatype; 335 dp_datatype.f.dp_brush_datatype = gmc.f.gmc_brush_datatype; 336 dp_datatype.f.dp_src2_type = 0; 337 dp_datatype.f.dp_src2_datatype = gmc.f.gmc_src_datatype; 338 dp_datatype.f.dp_src_datatype = gmc.f.gmc_src_datatype; 339 dp_datatype.f.dp_byte_pix_order = gmc.f.gmc_byte_pix_order; 340 writel(dp_datatype.val, remapped_regs + mmDP_DATATYPE); 341 342 dp_mix.f.dp_src_source = gmc.f.gmc_dp_src_source; 343 dp_mix.f.dp_src2_source = 1; 344 dp_mix.f.dp_rop3 = gmc.f.gmc_rop3; 345 dp_mix.f.dp_op = gmc.f.gmc_dp_op; 346 writel(dp_mix.val, remapped_regs + mmDP_MIX); 347} 348 349 350static void w100fb_fillrect(struct fb_info *info, 351 const struct fb_fillrect *rect) 352{ 353 union dp_gui_master_cntl_u gmc; 354 355 if (info->state != FBINFO_STATE_RUNNING) 356 return; 357 if (info->flags & FBINFO_HWACCEL_DISABLED) { 358 cfb_fillrect(info, rect); 359 return; 360 } 361 362 gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL); 363 gmc.f.gmc_rop3 = ROP3_PATCOPY; 364 gmc.f.gmc_brush_datatype = GMC_BRUSH_SOLID_COLOR; 365 w100_fifo_wait(2); 366 writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL); 367 writel(rect->color, remapped_regs + mmDP_BRUSH_FRGD_CLR); 368 369 w100_fifo_wait(2); 370 writel((rect->dy << 16) | (rect->dx & 0xffff), remapped_regs + mmDST_Y_X); 371 writel((rect->width << 16) | (rect->height & 0xffff), 372 remapped_regs + mmDST_WIDTH_HEIGHT); 373} 374 375 376static void w100fb_copyarea(struct fb_info *info, 377 const struct fb_copyarea *area) 378{ 379 u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy; 380 u32 h = area->height, w = area->width; 381 union dp_gui_master_cntl_u gmc; 382 383 if (info->state != FBINFO_STATE_RUNNING) 384 return; 385 if (info->flags & FBINFO_HWACCEL_DISABLED) { 386 cfb_copyarea(info, area); 387 return; 388 } 389 390 gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL); 391 gmc.f.gmc_rop3 = ROP3_SRCCOPY; 392 gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE; 393 w100_fifo_wait(1); 394 writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL); 395 396 w100_fifo_wait(3); 397 writel((sy << 16) | (sx & 0xffff), remapped_regs + mmSRC_Y_X); 398 writel((dy << 16) | (dx & 0xffff), remapped_regs + mmDST_Y_X); 399 writel((w << 16) | (h & 0xffff), remapped_regs + mmDST_WIDTH_HEIGHT); 400} 401 402 403/* 404 * Change the resolution by calling the appropriate hardware functions 405 */ 406static void w100fb_activate_var(struct w100fb_par *par) 407{ 408 struct w100_tg_info *tg = par->mach->tg; 409 410 w100_pwm_setup(par); 411 w100_setup_memory(par); 412 w100_init_clocks(par); 413 w100fb_clear_screen(par); 414 w100_vsync(); 415 416 w100_update_disable(); 417 w100_init_lcd(par); 418 w100_set_dispregs(par); 419 w100_update_enable(); 420 w100_init_graphic_engine(par); 421 422 calc_hsync(par); 423 424 if (!par->blanked && tg && tg->change) 425 tg->change(par); 426} 427 428 429/* Select the smallest mode that allows the desired resolution to be 430 * displayed. If desired, the x and y parameters can be rounded up to 431 * match the selected mode. 432 */ 433static struct w100_mode *w100fb_get_mode(struct w100fb_par *par, unsigned int *x, unsigned int *y, int saveval) 434{ 435 struct w100_mode *mode = NULL; 436 struct w100_mode *modelist = par->mach->modelist; 437 unsigned int best_x = 0xffffffff, best_y = 0xffffffff; 438 unsigned int i; 439 440 for (i = 0 ; i < par->mach->num_modes ; i++) { 441 if (modelist[i].xres >= *x && modelist[i].yres >= *y && 442 modelist[i].xres < best_x && modelist[i].yres < best_y) { 443 best_x = modelist[i].xres; 444 best_y = modelist[i].yres; 445 mode = &modelist[i]; 446 } else if(modelist[i].xres >= *y && modelist[i].yres >= *x && 447 modelist[i].xres < best_y && modelist[i].yres < best_x) { 448 best_x = modelist[i].yres; 449 best_y = modelist[i].xres; 450 mode = &modelist[i]; 451 } 452 } 453 454 if (mode && saveval) { 455 *x = best_x; 456 *y = best_y; 457 } 458 459 return mode; 460} 461 462 463/* 464 * w100fb_check_var(): 465 * Get the video params out of 'var'. If a value doesn't fit, round it up, 466 * if it's too big, return -EINVAL. 467 */ 468static int w100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) 469{ 470 struct w100fb_par *par=info->par; 471 472 if(!w100fb_get_mode(par, &var->xres, &var->yres, 1)) 473 return -EINVAL; 474 475 if (par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (par->mach->mem->size+1))) 476 return -EINVAL; 477 478 if (!par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1))) 479 return -EINVAL; 480 481 var->xres_virtual = max(var->xres_virtual, var->xres); 482 var->yres_virtual = max(var->yres_virtual, var->yres); 483 484 if (var->bits_per_pixel > BITS_PER_PIXEL) 485 return -EINVAL; 486 else 487 var->bits_per_pixel = BITS_PER_PIXEL; 488 489 var->red.offset = 11; 490 var->red.length = 5; 491 var->green.offset = 5; 492 var->green.length = 6; 493 var->blue.offset = 0; 494 var->blue.length = 5; 495 var->transp.offset = var->transp.length = 0; 496 497 var->nonstd = 0; 498 var->height = -1; 499 var->width = -1; 500 var->vmode = FB_VMODE_NONINTERLACED; 501 var->sync = 0; 502 var->pixclock = 0x04; /* 171521; */ 503 504 return 0; 505} 506 507 508/* 509 * w100fb_set_par(): 510 * Set the user defined part of the display for the specified console 511 * by looking at the values in info.var 512 */ 513static int w100fb_set_par(struct fb_info *info) 514{ 515 struct w100fb_par *par=info->par; 516 517 if (par->xres != info->var.xres || par->yres != info->var.yres) { 518 par->xres = info->var.xres; 519 par->yres = info->var.yres; 520 par->mode = w100fb_get_mode(par, &par->xres, &par->yres, 0); 521 522 info->fix.visual = FB_VISUAL_TRUECOLOR; 523 info->fix.ypanstep = 0; 524 info->fix.ywrapstep = 0; 525 info->fix.line_length = par->xres * BITS_PER_PIXEL / 8; 526 527 mutex_lock(&info->mm_lock); 528 if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) { 529 par->extmem_active = 1; 530 info->fix.smem_len = par->mach->mem->size+1; 531 } else { 532 par->extmem_active = 0; 533 info->fix.smem_len = MEM_INT_SIZE+1; 534 } 535 mutex_unlock(&info->mm_lock); 536 537 w100fb_activate_var(par); 538 } 539 return 0; 540} 541 542 543/* 544 * Frame buffer operations 545 */ 546static struct fb_ops w100fb_ops = { 547 .owner = THIS_MODULE, 548 .fb_check_var = w100fb_check_var, 549 .fb_set_par = w100fb_set_par, 550 .fb_setcolreg = w100fb_setcolreg, 551 .fb_blank = w100fb_blank, 552 .fb_fillrect = w100fb_fillrect, 553 .fb_copyarea = w100fb_copyarea, 554 .fb_imageblit = cfb_imageblit, 555 .fb_sync = w100fb_sync, 556}; 557 558#ifdef CONFIG_PM 559static void w100fb_save_vidmem(struct w100fb_par *par) 560{ 561 int memsize; 562 563 if (par->extmem_active) { 564 memsize=par->mach->mem->size; 565 par->saved_extmem = vmalloc(memsize); 566 if (par->saved_extmem) 567 memcpy_fromio(par->saved_extmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize); 568 } 569 memsize=MEM_INT_SIZE; 570 par->saved_intmem = vmalloc(memsize); 571 if (par->saved_intmem && par->extmem_active) 572 memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), memsize); 573 else if (par->saved_intmem) 574 memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize); 575} 576 577static void w100fb_restore_vidmem(struct w100fb_par *par) 578{ 579 int memsize; 580 581 if (par->extmem_active && par->saved_extmem) { 582 memsize=par->mach->mem->size; 583 memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_extmem, memsize); 584 vfree(par->saved_extmem); 585 } 586 if (par->saved_intmem) { 587 memsize=MEM_INT_SIZE; 588 if (par->extmem_active) 589 memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), par->saved_intmem, memsize); 590 else 591 memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_intmem, memsize); 592 vfree(par->saved_intmem); 593 } 594} 595 596static int w100fb_suspend(struct platform_device *dev, pm_message_t state) 597{ 598 struct fb_info *info = platform_get_drvdata(dev); 599 struct w100fb_par *par=info->par; 600 struct w100_tg_info *tg = par->mach->tg; 601 602 w100fb_save_vidmem(par); 603 if(tg && tg->suspend) 604 tg->suspend(par); 605 w100_suspend(W100_SUSPEND_ALL); 606 par->blanked = 1; 607 608 return 0; 609} 610 611static int w100fb_resume(struct platform_device *dev) 612{ 613 struct fb_info *info = platform_get_drvdata(dev); 614 struct w100fb_par *par=info->par; 615 struct w100_tg_info *tg = par->mach->tg; 616 617 w100_hw_init(par); 618 w100fb_activate_var(par); 619 w100fb_restore_vidmem(par); 620 if(tg && tg->resume) 621 tg->resume(par); 622 par->blanked = 0; 623 624 return 0; 625} 626#else 627#define w100fb_suspend NULL 628#define w100fb_resume NULL 629#endif 630 631 632int __devinit w100fb_probe(struct platform_device *pdev) 633{ 634 int err = -EIO; 635 struct w100fb_mach_info *inf; 636 struct fb_info *info = NULL; 637 struct w100fb_par *par; 638 struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 639 unsigned int chip_id; 640 641 if (!mem) 642 return -EINVAL; 643 644 /* Remap the chip base address */ 645 remapped_base = ioremap_nocache(mem->start+W100_CFG_BASE, W100_CFG_LEN); 646 if (remapped_base == NULL) 647 goto out; 648 649 /* Map the register space */ 650 remapped_regs = ioremap_nocache(mem->start+W100_REG_BASE, W100_REG_LEN); 651 if (remapped_regs == NULL) 652 goto out; 653 654 /* Identify the chip */ 655 printk("Found "); 656 chip_id = readl(remapped_regs + mmCHIP_ID); 657 switch(chip_id) { 658 case CHIP_ID_W100: printk("w100"); break; 659 case CHIP_ID_W3200: printk("w3200"); break; 660 case CHIP_ID_W3220: printk("w3220"); break; 661 default: 662 printk("Unknown imageon chip ID\n"); 663 err = -ENODEV; 664 goto out; 665 } 666 printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE); 667 668 /* Remap the framebuffer */ 669 remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE); 670 if (remapped_fbuf == NULL) 671 goto out; 672 673 info=framebuffer_alloc(sizeof(struct w100fb_par), &pdev->dev); 674 if (!info) { 675 err = -ENOMEM; 676 goto out; 677 } 678 679 par = info->par; 680 platform_set_drvdata(pdev, info); 681 682 inf = pdev->dev.platform_data; 683 par->chip_id = chip_id; 684 par->mach = inf; 685 par->fastpll_mode = 0; 686 par->blanked = 0; 687 688 par->pll_table=w100_get_xtal_table(inf->xtal_freq); 689 if (!par->pll_table) { 690 printk(KERN_ERR "No matching Xtal definition found\n"); 691 err = -EINVAL; 692 goto out; 693 } 694 695 info->pseudo_palette = kmalloc(sizeof (u32) * MAX_PALETTES, GFP_KERNEL); 696 if (!info->pseudo_palette) { 697 err = -ENOMEM; 698 goto out; 699 } 700 701 info->fbops = &w100fb_ops; 702 info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA | 703 FBINFO_HWACCEL_FILLRECT; 704 info->node = -1; 705 info->screen_base = remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE); 706 info->screen_size = REMAPPED_FB_LEN; 707 708 strcpy(info->fix.id, "w100fb"); 709 info->fix.type = FB_TYPE_PACKED_PIXELS; 710 info->fix.type_aux = 0; 711 info->fix.accel = FB_ACCEL_NONE; 712 info->fix.smem_start = mem->start+W100_FB_BASE; 713 info->fix.mmio_start = mem->start+W100_REG_BASE; 714 info->fix.mmio_len = W100_REG_LEN; 715 716 if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { 717 err = -ENOMEM; 718 goto out; 719 } 720 721 par->mode = &inf->modelist[0]; 722 if(inf->init_mode & INIT_MODE_ROTATED) { 723 info->var.xres = par->mode->yres; 724 info->var.yres = par->mode->xres; 725 } 726 else { 727 info->var.xres = par->mode->xres; 728 info->var.yres = par->mode->yres; 729 } 730 731 if(inf->init_mode &= INIT_MODE_FLIPPED) 732 par->flip = 1; 733 else 734 par->flip = 0; 735 736 info->var.xres_virtual = info->var.xres; 737 info->var.yres_virtual = info->var.yres; 738 info->var.pixclock = 0x04; /* 171521; */ 739 info->var.sync = 0; 740 info->var.grayscale = 0; 741 info->var.xoffset = info->var.yoffset = 0; 742 info->var.accel_flags = 0; 743 info->var.activate = FB_ACTIVATE_NOW; 744 745 w100_hw_init(par); 746 747 if (w100fb_check_var(&info->var, info) < 0) { 748 err = -EINVAL; 749 goto out; 750 } 751 752 if (register_framebuffer(info) < 0) { 753 err = -EINVAL; 754 goto out; 755 } 756 757 err = device_create_file(&pdev->dev, &dev_attr_fastpllclk); 758 err |= device_create_file(&pdev->dev, &dev_attr_reg_read); 759 err |= device_create_file(&pdev->dev, &dev_attr_reg_write); 760 err |= device_create_file(&pdev->dev, &dev_attr_flip); 761 762 if (err != 0) 763 printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n", 764 info->node, err); 765 766 printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); 767 return 0; 768out: 769 if (info) { 770 fb_dealloc_cmap(&info->cmap); 771 kfree(info->pseudo_palette); 772 } 773 if (remapped_fbuf != NULL) 774 iounmap(remapped_fbuf); 775 if (remapped_regs != NULL) 776 iounmap(remapped_regs); 777 if (remapped_base != NULL) 778 iounmap(remapped_base); 779 if (info) 780 framebuffer_release(info); 781 return err; 782} 783 784 785static int __devexit w100fb_remove(struct platform_device *pdev) 786{ 787 struct fb_info *info = platform_get_drvdata(pdev); 788 struct w100fb_par *par=info->par; 789 790 device_remove_file(&pdev->dev, &dev_attr_fastpllclk); 791 device_remove_file(&pdev->dev, &dev_attr_reg_read); 792 device_remove_file(&pdev->dev, &dev_attr_reg_write); 793 device_remove_file(&pdev->dev, &dev_attr_flip); 794 795 unregister_framebuffer(info); 796 797 vfree(par->saved_intmem); 798 vfree(par->saved_extmem); 799 kfree(info->pseudo_palette); 800 fb_dealloc_cmap(&info->cmap); 801 802 iounmap(remapped_base); 803 iounmap(remapped_regs); 804 iounmap(remapped_fbuf); 805 806 framebuffer_release(info); 807 808 return 0; 809} 810 811 812/* ------------------- chipset specific functions -------------------------- */ 813 814 815static void w100_soft_reset(void) 816{ 817 u16 val = readw((u16 *) remapped_base + cfgSTATUS); 818 writew(val | 0x08, (u16 *) remapped_base + cfgSTATUS); 819 udelay(100); 820 writew(0x00, (u16 *) remapped_base + cfgSTATUS); 821 udelay(100); 822} 823 824static void w100_update_disable(void) 825{ 826 union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl; 827 828 /* Prevent display updates */ 829 disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e; 830 disp_db_buf_wr_cntl.f.update_db_buf = 0; 831 disp_db_buf_wr_cntl.f.en_db_buf = 0; 832 writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL); 833} 834 835static void w100_update_enable(void) 836{ 837 union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl; 838 839 /* Enable display updates */ 840 disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e; 841 disp_db_buf_wr_cntl.f.update_db_buf = 1; 842 disp_db_buf_wr_cntl.f.en_db_buf = 1; 843 writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL); 844} 845 846unsigned long w100fb_gpio_read(int port) 847{ 848 unsigned long value; 849 850 if (port==W100_GPIO_PORT_A) 851 value = readl(remapped_regs + mmGPIO_DATA); 852 else 853 value = readl(remapped_regs + mmGPIO_DATA2); 854 855 return value; 856} 857 858void w100fb_gpio_write(int port, unsigned long value) 859{ 860 if (port==W100_GPIO_PORT_A) 861 writel(value, remapped_regs + mmGPIO_DATA); 862 else 863 writel(value, remapped_regs + mmGPIO_DATA2); 864} 865EXPORT_SYMBOL(w100fb_gpio_read); 866EXPORT_SYMBOL(w100fb_gpio_write); 867 868/* 869 * Initialization of critical w100 hardware 870 */ 871static void w100_hw_init(struct w100fb_par *par) 872{ 873 u32 temp32; 874 union cif_cntl_u cif_cntl; 875 union intf_cntl_u intf_cntl; 876 union cfgreg_base_u cfgreg_base; 877 union wrap_top_dir_u wrap_top_dir; 878 union cif_read_dbg_u cif_read_dbg; 879 union cpu_defaults_u cpu_default; 880 union cif_write_dbg_u cif_write_dbg; 881 union wrap_start_dir_u wrap_start_dir; 882 union cif_io_u cif_io; 883 struct w100_gpio_regs *gpio = par->mach->gpio; 884 885 w100_soft_reset(); 886 887 /* This is what the fpga_init code does on reset. May be wrong 888 but there is little info available */ 889 writel(0x31, remapped_regs + mmSCRATCH_UMSK); 890 for (temp32 = 0; temp32 < 10000; temp32++) 891 readl(remapped_regs + mmSCRATCH_UMSK); 892 writel(0x30, remapped_regs + mmSCRATCH_UMSK); 893 894 /* Set up CIF */ 895 cif_io.val = defCIF_IO; 896 writel((u32)(cif_io.val), remapped_regs + mmCIF_IO); 897 898 cif_write_dbg.val = readl(remapped_regs + mmCIF_WRITE_DBG); 899 cif_write_dbg.f.dis_packer_ful_during_rbbm_timeout = 0; 900 cif_write_dbg.f.en_dword_split_to_rbbm = 1; 901 cif_write_dbg.f.dis_timeout_during_rbbm = 1; 902 writel((u32) (cif_write_dbg.val), remapped_regs + mmCIF_WRITE_DBG); 903 904 cif_read_dbg.val = readl(remapped_regs + mmCIF_READ_DBG); 905 cif_read_dbg.f.dis_rd_same_byte_to_trig_fetch = 1; 906 writel((u32) (cif_read_dbg.val), remapped_regs + mmCIF_READ_DBG); 907 908 cif_cntl.val = readl(remapped_regs + mmCIF_CNTL); 909 cif_cntl.f.dis_system_bits = 1; 910 cif_cntl.f.dis_mr = 1; 911 cif_cntl.f.en_wait_to_compensate_dq_prop_dly = 0; 912 cif_cntl.f.intb_oe = 1; 913 cif_cntl.f.interrupt_active_high = 1; 914 writel((u32) (cif_cntl.val), remapped_regs + mmCIF_CNTL); 915 916 /* Setup cfgINTF_CNTL and cfgCPU defaults */ 917 intf_cntl.val = defINTF_CNTL; 918 intf_cntl.f.ad_inc_a = 1; 919 intf_cntl.f.ad_inc_b = 1; 920 intf_cntl.f.rd_data_rdy_a = 0; 921 intf_cntl.f.rd_data_rdy_b = 0; 922 writeb((u8) (intf_cntl.val), remapped_base + cfgINTF_CNTL); 923 924 cpu_default.val = defCPU_DEFAULTS; 925 cpu_default.f.access_ind_addr_a = 1; 926 cpu_default.f.access_ind_addr_b = 1; 927 cpu_default.f.access_scratch_reg = 1; 928 cpu_default.f.transition_size = 0; 929 writeb((u8) (cpu_default.val), remapped_base + cfgCPU_DEFAULTS); 930 931 /* set up the apertures */ 932 writeb((u8) (W100_REG_BASE >> 16), remapped_base + cfgREG_BASE); 933 934 cfgreg_base.val = defCFGREG_BASE; 935 cfgreg_base.f.cfgreg_base = W100_CFG_BASE; 936 writel((u32) (cfgreg_base.val), remapped_regs + mmCFGREG_BASE); 937 938 wrap_start_dir.val = defWRAP_START_DIR; 939 wrap_start_dir.f.start_addr = WRAP_BUF_BASE_VALUE >> 1; 940 writel((u32) (wrap_start_dir.val), remapped_regs + mmWRAP_START_DIR); 941 942 wrap_top_dir.val = defWRAP_TOP_DIR; 943 wrap_top_dir.f.top_addr = WRAP_BUF_TOP_VALUE >> 1; 944 writel((u32) (wrap_top_dir.val), remapped_regs + mmWRAP_TOP_DIR); 945 946 writel((u32) 0x2440, remapped_regs + mmRBBM_CNTL); 947 948 /* Set the hardware to 565 colour */ 949 temp32 = readl(remapped_regs + mmDISP_DEBUG2); 950 temp32 &= 0xff7fffff; 951 temp32 |= 0x00800000; 952 writel(temp32, remapped_regs + mmDISP_DEBUG2); 953 954 /* Initialise the GPIO lines */ 955 if (gpio) { 956 writel(gpio->init_data1, remapped_regs + mmGPIO_DATA); 957 writel(gpio->init_data2, remapped_regs + mmGPIO_DATA2); 958 writel(gpio->gpio_dir1, remapped_regs + mmGPIO_CNTL1); 959 writel(gpio->gpio_oe1, remapped_regs + mmGPIO_CNTL2); 960 writel(gpio->gpio_dir2, remapped_regs + mmGPIO_CNTL3); 961 writel(gpio->gpio_oe2, remapped_regs + mmGPIO_CNTL4); 962 } 963} 964 965 966struct power_state { 967 union clk_pin_cntl_u clk_pin_cntl; 968 union pll_ref_fb_div_u pll_ref_fb_div; 969 union pll_cntl_u pll_cntl; 970 union sclk_cntl_u sclk_cntl; 971 union pclk_cntl_u pclk_cntl; 972 union pwrmgt_cntl_u pwrmgt_cntl; 973 int auto_mode; /* system clock auto changing? */ 974}; 975 976 977static struct power_state w100_pwr_state; 978 979/* The PLL Fout is determined by (XtalFreq/(M+1)) * ((N_int+1) + (N_fac/8)) */ 980 981/* 12.5MHz Crystal PLL Table */ 982static struct w100_pll_info xtal_12500000[] = { 983 /*freq M N_int N_fac tfgoal lock_time */ 984 { 50, 0, 1, 0, 0xe0, 56}, /* 50.00 MHz */ 985 { 75, 0, 5, 0, 0xde, 37}, /* 75.00 MHz */ 986 {100, 0, 7, 0, 0xe0, 28}, /* 100.00 MHz */ 987 {125, 0, 9, 0, 0xe0, 22}, /* 125.00 MHz */ 988 {150, 0, 11, 0, 0xe0, 17}, /* 150.00 MHz */ 989 { 0, 0, 0, 0, 0, 0}, /* Terminator */ 990}; 991 992/* 14.318MHz Crystal PLL Table */ 993static struct w100_pll_info xtal_14318000[] = { 994 /*freq M N_int N_fac tfgoal lock_time */ 995 { 40, 4, 13, 0, 0xe0, 80}, /* tfgoal guessed */ 996 { 50, 1, 6, 0, 0xe0, 64}, /* 50.05 MHz */ 997 { 57, 2, 11, 0, 0xe0, 53}, /* tfgoal guessed */ 998 { 75, 0, 4, 3, 0xe0, 43}, /* 75.08 MHz */ 999 {100, 0, 6, 0, 0xe0, 32}, /* 100.10 MHz */ 1000 { 0, 0, 0, 0, 0, 0}, 1001}; 1002 1003/* 16MHz Crystal PLL Table */ 1004static struct w100_pll_info xtal_16000000[] = { 1005 /*freq M N_int N_fac tfgoal lock_time */ 1006 { 72, 1, 8, 0, 0xe0, 48}, /* tfgoal guessed */ 1007 { 80, 1, 9, 0, 0xe0, 13}, /* tfgoal guessed */ 1008 { 95, 1, 10, 7, 0xe0, 38}, /* tfgoal guessed */ 1009 { 96, 1, 11, 0, 0xe0, 36}, /* tfgoal guessed */ 1010 { 0, 0, 0, 0, 0, 0}, 1011}; 1012 1013static struct pll_entries { 1014 int xtal_freq; 1015 struct w100_pll_info *pll_table; 1016} w100_pll_tables[] = { 1017 { 12500000, &xtal_12500000[0] }, 1018 { 14318000, &xtal_14318000[0] }, 1019 { 16000000, &xtal_16000000[0] }, 1020 { 0 }, 1021}; 1022 1023struct w100_pll_info __devinit *w100_get_xtal_table(unsigned int freq) 1024{ 1025 struct pll_entries *pll_entry = w100_pll_tables; 1026 1027 do { 1028 if (freq == pll_entry->xtal_freq) 1029 return pll_entry->pll_table; 1030 pll_entry++; 1031 } while (pll_entry->xtal_freq); 1032 return 0; 1033} 1034 1035 1036static unsigned int w100_get_testcount(unsigned int testclk_sel) 1037{ 1038 union clk_test_cntl_u clk_test_cntl; 1039 1040 udelay(5); 1041 1042 /* Select the test clock source and reset */ 1043 clk_test_cntl.f.start_check_freq = 0x0; 1044 clk_test_cntl.f.testclk_sel = testclk_sel; 1045 clk_test_cntl.f.tstcount_rst = 0x1; /* set reset */ 1046 writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL); 1047 1048 clk_test_cntl.f.tstcount_rst = 0x0; /* clear reset */ 1049 writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL); 1050 1051 /* Run clock test */ 1052 clk_test_cntl.f.start_check_freq = 0x1; 1053 writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL); 1054 1055 /* Give the test time to complete */ 1056 udelay(20); 1057 1058 /* Return the result */ 1059 clk_test_cntl.val = readl(remapped_regs + mmCLK_TEST_CNTL); 1060 clk_test_cntl.f.start_check_freq = 0x0; 1061 writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL); 1062 1063 return clk_test_cntl.f.test_count; 1064} 1065 1066 1067static int w100_pll_adjust(struct w100_pll_info *pll) 1068{ 1069 unsigned int tf80; 1070 unsigned int tf20; 1071 1072 /* Initial Settings */ 1073 w100_pwr_state.pll_cntl.f.pll_pwdn = 0x0; /* power down */ 1074 w100_pwr_state.pll_cntl.f.pll_reset = 0x0; /* not reset */ 1075 w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x1; /* Hi-Z */ 1076 w100_pwr_state.pll_cntl.f.pll_pvg = 0x0; /* VCO gain = 0 */ 1077 w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0; /* VCO frequency range control = off */ 1078 w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0; /* current offset inside VCO = 0 */ 1079 w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0; 1080 1081 /* Wai Ming 80 percent of VDD 1.3V gives 1.04V, minimum operating voltage is 1.08V 1082 * therefore, commented out the following lines 1083 * tf80 meant tf100 1084 */ 1085 do { 1086 /* set VCO input = 0.8 * VDD */ 1087 w100_pwr_state.pll_cntl.f.pll_dactal = 0xd; 1088 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL); 1089 1090 tf80 = w100_get_testcount(TESTCLK_SRC_PLL); 1091 if (tf80 >= (pll->tfgoal)) { 1092 /* set VCO input = 0.2 * VDD */ 1093 w100_pwr_state.pll_cntl.f.pll_dactal = 0x7; 1094 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL); 1095 1096 tf20 = w100_get_testcount(TESTCLK_SRC_PLL); 1097 if (tf20 <= (pll->tfgoal)) 1098 return 1; /* Success */ 1099 1100 if ((w100_pwr_state.pll_cntl.f.pll_vcofr == 0x0) && 1101 ((w100_pwr_state.pll_cntl.f.pll_pvg == 0x7) || 1102 (w100_pwr_state.pll_cntl.f.pll_ioffset == 0x0))) { 1103 /* slow VCO config */ 1104 w100_pwr_state.pll_cntl.f.pll_vcofr = 0x1; 1105 w100_pwr_state.pll_cntl.f.pll_pvg = 0x0; 1106 w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0; 1107 continue; 1108 } 1109 } 1110 if ((w100_pwr_state.pll_cntl.f.pll_ioffset) < 0x3) { 1111 w100_pwr_state.pll_cntl.f.pll_ioffset += 0x1; 1112 } else if ((w100_pwr_state.pll_cntl.f.pll_pvg) < 0x7) { 1113 w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0; 1114 w100_pwr_state.pll_cntl.f.pll_pvg += 0x1; 1115 } else { 1116 return 0; /* Error */ 1117 } 1118 } while(1); 1119} 1120 1121 1122/* 1123 * w100_pll_calibration 1124 */ 1125static int w100_pll_calibration(struct w100_pll_info *pll) 1126{ 1127 int status; 1128 1129 status = w100_pll_adjust(pll); 1130 1131 /* PLL Reset And Lock */ 1132 /* set VCO input = 0.5 * VDD */ 1133 w100_pwr_state.pll_cntl.f.pll_dactal = 0xa; 1134 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL); 1135 1136 udelay(1); /* reset time */ 1137 1138 /* enable charge pump */ 1139 w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0; /* normal */ 1140 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL); 1141 1142 /* set VCO input = Hi-Z, disable DAC */ 1143 w100_pwr_state.pll_cntl.f.pll_dactal = 0x0; 1144 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL); 1145 1146 udelay(400); /* lock time */ 1147 1148 /* PLL locked */ 1149 1150 return status; 1151} 1152 1153 1154static int w100_pll_set_clk(struct w100_pll_info *pll) 1155{ 1156 int status; 1157 1158 if (w100_pwr_state.auto_mode == 1) /* auto mode */ 1159 { 1160 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0; /* disable fast to normal */ 1161 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0; /* disable normal to fast */ 1162 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL); 1163 } 1164 1165 /* Set system clock source to XTAL whilst adjusting the PLL! */ 1166 w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL; 1167 writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL); 1168 1169 w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = pll->M; 1170 w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = pll->N_int; 1171 w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = pll->N_fac; 1172 w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = pll->lock_time; 1173 writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV); 1174 1175 w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0; 1176 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL); 1177 1178 status = w100_pll_calibration(pll); 1179 1180 if (w100_pwr_state.auto_mode == 1) /* auto mode */ 1181 { 1182 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x1; /* reenable fast to normal */ 1183 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x1; /* reenable normal to fast */ 1184 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL); 1185 } 1186 return status; 1187} 1188 1189/* freq = target frequency of the PLL */ 1190static int w100_set_pll_freq(struct w100fb_par *par, unsigned int freq) 1191{ 1192 struct w100_pll_info *pll = par->pll_table; 1193 1194 do { 1195 if (freq == pll->freq) { 1196 return w100_pll_set_clk(pll); 1197 } 1198 pll++; 1199 } while(pll->freq); 1200 return 0; 1201} 1202 1203/* Set up an initial state. Some values/fields set 1204 here will be overwritten. */ 1205static void w100_pwm_setup(struct w100fb_par *par) 1206{ 1207 w100_pwr_state.clk_pin_cntl.f.osc_en = 0x1; 1208 w100_pwr_state.clk_pin_cntl.f.osc_gain = 0x1f; 1209 w100_pwr_state.clk_pin_cntl.f.dont_use_xtalin = 0x0; 1210 w100_pwr_state.clk_pin_cntl.f.xtalin_pm_en = 0x0; 1211 w100_pwr_state.clk_pin_cntl.f.xtalin_dbl_en = par->mach->xtal_dbl ? 1 : 0; 1212 w100_pwr_state.clk_pin_cntl.f.cg_debug = 0x0; 1213 writel((u32) (w100_pwr_state.clk_pin_cntl.val), remapped_regs + mmCLK_PIN_CNTL); 1214 1215 w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL; 1216 w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = 0x0; /* Pfast = 1 */ 1217 w100_pwr_state.sclk_cntl.f.sclk_clkon_hys = 0x3; 1218 w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = 0x0; /* Pslow = 1 */ 1219 w100_pwr_state.sclk_cntl.f.disp_cg_ok2switch_en = 0x0; 1220 w100_pwr_state.sclk_cntl.f.sclk_force_reg = 0x0; /* Dynamic */ 1221 w100_pwr_state.sclk_cntl.f.sclk_force_disp = 0x0; /* Dynamic */ 1222 w100_pwr_state.sclk_cntl.f.sclk_force_mc = 0x0; /* Dynamic */ 1223 w100_pwr_state.sclk_cntl.f.sclk_force_extmc = 0x0; /* Dynamic */ 1224 w100_pwr_state.sclk_cntl.f.sclk_force_cp = 0x0; /* Dynamic */ 1225 w100_pwr_state.sclk_cntl.f.sclk_force_e2 = 0x0; /* Dynamic */ 1226 w100_pwr_state.sclk_cntl.f.sclk_force_e3 = 0x0; /* Dynamic */ 1227 w100_pwr_state.sclk_cntl.f.sclk_force_idct = 0x0; /* Dynamic */ 1228 w100_pwr_state.sclk_cntl.f.sclk_force_bist = 0x0; /* Dynamic */ 1229 w100_pwr_state.sclk_cntl.f.busy_extend_cp = 0x0; 1230 w100_pwr_state.sclk_cntl.f.busy_extend_e2 = 0x0; 1231 w100_pwr_state.sclk_cntl.f.busy_extend_e3 = 0x0; 1232 w100_pwr_state.sclk_cntl.f.busy_extend_idct = 0x0; 1233 writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL); 1234 1235 w100_pwr_state.pclk_cntl.f.pclk_src_sel = CLK_SRC_XTAL; 1236 w100_pwr_state.pclk_cntl.f.pclk_post_div = 0x1; /* P = 2 */ 1237 w100_pwr_state.pclk_cntl.f.pclk_force_disp = 0x0; /* Dynamic */ 1238 writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL); 1239 1240 w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = 0x0; /* M = 1 */ 1241 w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = 0x0; /* N = 1.0 */ 1242 w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = 0x0; 1243 w100_pwr_state.pll_ref_fb_div.f.pll_reset_time = 0x5; 1244 w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = 0xff; 1245 writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV); 1246 1247 w100_pwr_state.pll_cntl.f.pll_pwdn = 0x1; 1248 w100_pwr_state.pll_cntl.f.pll_reset = 0x1; 1249 w100_pwr_state.pll_cntl.f.pll_pm_en = 0x0; 1250 w100_pwr_state.pll_cntl.f.pll_mode = 0x0; /* uses VCO clock */ 1251 w100_pwr_state.pll_cntl.f.pll_refclk_sel = 0x0; 1252 w100_pwr_state.pll_cntl.f.pll_fbclk_sel = 0x0; 1253 w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0; 1254 w100_pwr_state.pll_cntl.f.pll_pcp = 0x4; 1255 w100_pwr_state.pll_cntl.f.pll_pvg = 0x0; 1256 w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0; 1257 w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0; 1258 w100_pwr_state.pll_cntl.f.pll_pecc_mode = 0x0; 1259 w100_pwr_state.pll_cntl.f.pll_pecc_scon = 0x0; 1260 w100_pwr_state.pll_cntl.f.pll_dactal = 0x0; /* Hi-Z */ 1261 w100_pwr_state.pll_cntl.f.pll_cp_clip = 0x3; 1262 w100_pwr_state.pll_cntl.f.pll_conf = 0x2; 1263 w100_pwr_state.pll_cntl.f.pll_mbctrl = 0x2; 1264 w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0; 1265 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL); 1266 1267 w100_pwr_state.pwrmgt_cntl.f.pwm_enable = 0x0; 1268 w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0x1; /* normal mode (0, 1, 3) */ 1269 w100_pwr_state.pwrmgt_cntl.f.pwm_wakeup_cond = 0x0; 1270 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0; 1271 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0; 1272 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_cond = 0x1; /* PM4,ENG */ 1273 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_cond = 0x1; /* PM4,ENG */ 1274 w100_pwr_state.pwrmgt_cntl.f.pwm_idle_timer = 0xFF; 1275 w100_pwr_state.pwrmgt_cntl.f.pwm_busy_timer = 0xFF; 1276 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL); 1277 1278 w100_pwr_state.auto_mode = 0; /* manual mode */ 1279} 1280 1281 1282/* 1283 * Setup the w100 clocks for the specified mode 1284 */ 1285static void w100_init_clocks(struct w100fb_par *par) 1286{ 1287 struct w100_mode *mode = par->mode; 1288 1289 if (mode->pixclk_src == CLK_SRC_PLL || mode->sysclk_src == CLK_SRC_PLL) 1290 w100_set_pll_freq(par, (par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq); 1291 1292 w100_pwr_state.sclk_cntl.f.sclk_src_sel = mode->sysclk_src; 1293 w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = mode->sysclk_divider; 1294 w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = mode->sysclk_divider; 1295 writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL); 1296} 1297 1298static void w100_init_lcd(struct w100fb_par *par) 1299{ 1300 u32 temp32; 1301 struct w100_mode *mode = par->mode; 1302 struct w100_gen_regs *regs = par->mach->regs; 1303 union active_h_disp_u active_h_disp; 1304 union active_v_disp_u active_v_disp; 1305 union graphic_h_disp_u graphic_h_disp; 1306 union graphic_v_disp_u graphic_v_disp; 1307 union crtc_total_u crtc_total; 1308 1309 /* w3200 doesnt like undefined bits being set so zero register values first */ 1310 1311 active_h_disp.val = 0; 1312 active_h_disp.f.active_h_start=mode->left_margin; 1313 active_h_disp.f.active_h_end=mode->left_margin + mode->xres; 1314 writel(active_h_disp.val, remapped_regs + mmACTIVE_H_DISP); 1315 1316 active_v_disp.val = 0; 1317 active_v_disp.f.active_v_start=mode->upper_margin; 1318 active_v_disp.f.active_v_end=mode->upper_margin + mode->yres; 1319 writel(active_v_disp.val, remapped_regs + mmACTIVE_V_DISP); 1320 1321 graphic_h_disp.val = 0; 1322 graphic_h_disp.f.graphic_h_start=mode->left_margin; 1323 graphic_h_disp.f.graphic_h_end=mode->left_margin + mode->xres; 1324 writel(graphic_h_disp.val, remapped_regs + mmGRAPHIC_H_DISP); 1325 1326 graphic_v_disp.val = 0; 1327 graphic_v_disp.f.graphic_v_start=mode->upper_margin; 1328 graphic_v_disp.f.graphic_v_end=mode->upper_margin + mode->yres; 1329 writel(graphic_v_disp.val, remapped_regs + mmGRAPHIC_V_DISP); 1330 1331 crtc_total.val = 0; 1332 crtc_total.f.crtc_h_total=mode->left_margin + mode->xres + mode->right_margin; 1333 crtc_total.f.crtc_v_total=mode->upper_margin + mode->yres + mode->lower_margin; 1334 writel(crtc_total.val, remapped_regs + mmCRTC_TOTAL); 1335 1336 writel(mode->crtc_ss, remapped_regs + mmCRTC_SS); 1337 writel(mode->crtc_ls, remapped_regs + mmCRTC_LS); 1338 writel(mode->crtc_gs, remapped_regs + mmCRTC_GS); 1339 writel(mode->crtc_vpos_gs, remapped_regs + mmCRTC_VPOS_GS); 1340 writel(mode->crtc_rev, remapped_regs + mmCRTC_REV); 1341 writel(mode->crtc_dclk, remapped_regs + mmCRTC_DCLK); 1342 writel(mode->crtc_gclk, remapped_regs + mmCRTC_GCLK); 1343 writel(mode->crtc_goe, remapped_regs + mmCRTC_GOE); 1344 writel(mode->crtc_ps1_active, remapped_regs + mmCRTC_PS1_ACTIVE); 1345 1346 writel(regs->lcd_format, remapped_regs + mmLCD_FORMAT); 1347 writel(regs->lcdd_cntl1, remapped_regs + mmLCDD_CNTL1); 1348 writel(regs->lcdd_cntl2, remapped_regs + mmLCDD_CNTL2); 1349 writel(regs->genlcd_cntl1, remapped_regs + mmGENLCD_CNTL1); 1350 writel(regs->genlcd_cntl2, remapped_regs + mmGENLCD_CNTL2); 1351 writel(regs->genlcd_cntl3, remapped_regs + mmGENLCD_CNTL3); 1352 1353 writel(0x00000000, remapped_regs + mmCRTC_FRAME); 1354 writel(0x00000000, remapped_regs + mmCRTC_FRAME_VPOS); 1355 writel(0x00000000, remapped_regs + mmCRTC_DEFAULT_COUNT); 1356 writel(0x0000FF00, remapped_regs + mmLCD_BACKGROUND_COLOR); 1357 1358 /* Hack for overlay in ext memory */ 1359 temp32 = readl(remapped_regs + mmDISP_DEBUG2); 1360 temp32 |= 0xc0000000; 1361 writel(temp32, remapped_regs + mmDISP_DEBUG2); 1362} 1363 1364 1365static void w100_setup_memory(struct w100fb_par *par) 1366{ 1367 union mc_ext_mem_location_u extmem_location; 1368 union mc_fb_location_u intmem_location; 1369 struct w100_mem_info *mem = par->mach->mem; 1370 struct w100_bm_mem_info *bm_mem = par->mach->bm_mem; 1371 1372 if (!par->extmem_active) { 1373 w100_suspend(W100_SUSPEND_EXTMEM); 1374 1375 /* Map Internal Memory at FB Base */ 1376 intmem_location.f.mc_fb_start = W100_FB_BASE >> 8; 1377 intmem_location.f.mc_fb_top = (W100_FB_BASE+MEM_INT_SIZE) >> 8; 1378 writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION); 1379 1380 /* Unmap External Memory - value is *probably* irrelevant but may have meaning 1381 to acceleration libraries */ 1382 extmem_location.f.mc_ext_mem_start = MEM_EXT_BASE_VALUE >> 8; 1383 extmem_location.f.mc_ext_mem_top = (MEM_EXT_BASE_VALUE-1) >> 8; 1384 writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION); 1385 } else { 1386 /* Map Internal Memory to its default location */ 1387 intmem_location.f.mc_fb_start = MEM_INT_BASE_VALUE >> 8; 1388 intmem_location.f.mc_fb_top = (MEM_INT_BASE_VALUE+MEM_INT_SIZE) >> 8; 1389 writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION); 1390 1391 /* Map External Memory at FB Base */ 1392 extmem_location.f.mc_ext_mem_start = W100_FB_BASE >> 8; 1393 extmem_location.f.mc_ext_mem_top = (W100_FB_BASE+par->mach->mem->size) >> 8; 1394 writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION); 1395 1396 writel(0x00007800, remapped_regs + mmMC_BIST_CTRL); 1397 writel(mem->ext_cntl, remapped_regs + mmMEM_EXT_CNTL); 1398 writel(0x00200021, remapped_regs + mmMEM_SDRAM_MODE_REG); 1399 udelay(100); 1400 writel(0x80200021, remapped_regs + mmMEM_SDRAM_MODE_REG); 1401 udelay(100); 1402 writel(mem->sdram_mode_reg, remapped_regs + mmMEM_SDRAM_MODE_REG); 1403 udelay(100); 1404 writel(mem->ext_timing_cntl, remapped_regs + mmMEM_EXT_TIMING_CNTL); 1405 writel(mem->io_cntl, remapped_regs + mmMEM_IO_CNTL); 1406 if (bm_mem) { 1407 writel(bm_mem->ext_mem_bw, remapped_regs + mmBM_EXT_MEM_BANDWIDTH); 1408 writel(bm_mem->offset, remapped_regs + mmBM_OFFSET); 1409 writel(bm_mem->ext_timing_ctl, remapped_regs + mmBM_MEM_EXT_TIMING_CNTL); 1410 writel(bm_mem->ext_cntl, remapped_regs + mmBM_MEM_EXT_CNTL); 1411 writel(bm_mem->mode_reg, remapped_regs + mmBM_MEM_MODE_REG); 1412 writel(bm_mem->io_cntl, remapped_regs + mmBM_MEM_IO_CNTL); 1413 writel(bm_mem->config, remapped_regs + mmBM_CONFIG); 1414 } 1415 } 1416} 1417 1418static void w100_set_dispregs(struct w100fb_par *par) 1419{ 1420 unsigned long rot=0, divider, offset=0; 1421 union graphic_ctrl_u graphic_ctrl; 1422 1423 /* See if the mode has been rotated */ 1424 if (par->xres == par->mode->xres) { 1425 if (par->flip) { 1426 rot=3; /* 180 degree */ 1427 offset=(par->xres * par->yres) - 1; 1428 } /* else 0 degree */ 1429 divider = par->mode->pixclk_divider; 1430 } else { 1431 if (par->flip) { 1432 rot=2; /* 270 degree */ 1433 offset=par->xres - 1; 1434 } else { 1435 rot=1; /* 90 degree */ 1436 offset=par->xres * (par->yres - 1); 1437 } 1438 divider = par->mode->pixclk_divider_rotated; 1439 } 1440 1441 graphic_ctrl.val = 0; /* w32xx doesn't like undefined bits */ 1442 switch (par->chip_id) { 1443 case CHIP_ID_W100: 1444 graphic_ctrl.f_w100.color_depth=6; 1445 graphic_ctrl.f_w100.en_crtc=1; 1446 graphic_ctrl.f_w100.en_graphic_req=1; 1447 graphic_ctrl.f_w100.en_graphic_crtc=1; 1448 graphic_ctrl.f_w100.lcd_pclk_on=1; 1449 graphic_ctrl.f_w100.lcd_sclk_on=1; 1450 graphic_ctrl.f_w100.low_power_on=0; 1451 graphic_ctrl.f_w100.req_freq=0; 1452 graphic_ctrl.f_w100.portrait_mode=rot; 1453 1454 /* Zaurus needs this */ 1455 switch(par->xres) { 1456 case 240: 1457 case 320: 1458 default: 1459 graphic_ctrl.f_w100.total_req_graphic=0xa0; 1460 break; 1461 case 480: 1462 case 640: 1463 switch(rot) { 1464 case 0: /* 0 */ 1465 case 3: /* 180 */ 1466 graphic_ctrl.f_w100.low_power_on=1; 1467 graphic_ctrl.f_w100.req_freq=5; 1468 break; 1469 case 1: /* 90 */ 1470 case 2: /* 270 */ 1471 graphic_ctrl.f_w100.req_freq=4; 1472 break; 1473 default: 1474 break; 1475 } 1476 graphic_ctrl.f_w100.total_req_graphic=0xf0; 1477 break; 1478 } 1479 break; 1480 case CHIP_ID_W3200: 1481 case CHIP_ID_W3220: 1482 graphic_ctrl.f_w32xx.color_depth=6; 1483 graphic_ctrl.f_w32xx.en_crtc=1; 1484 graphic_ctrl.f_w32xx.en_graphic_req=1; 1485 graphic_ctrl.f_w32xx.en_graphic_crtc=1; 1486 graphic_ctrl.f_w32xx.lcd_pclk_on=1; 1487 graphic_ctrl.f_w32xx.lcd_sclk_on=1; 1488 graphic_ctrl.f_w32xx.low_power_on=0; 1489 graphic_ctrl.f_w32xx.req_freq=0; 1490 graphic_ctrl.f_w32xx.total_req_graphic=par->mode->xres >> 1; /* panel xres, not mode */ 1491 graphic_ctrl.f_w32xx.portrait_mode=rot; 1492 break; 1493 } 1494 1495 /* Set the pixel clock source and divider */ 1496 w100_pwr_state.pclk_cntl.f.pclk_src_sel = par->mode->pixclk_src; 1497 w100_pwr_state.pclk_cntl.f.pclk_post_div = divider; 1498 writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL); 1499 1500 writel(graphic_ctrl.val, remapped_regs + mmGRAPHIC_CTRL); 1501 writel(W100_FB_BASE + ((offset * BITS_PER_PIXEL/8)&~0x03UL), remapped_regs + mmGRAPHIC_OFFSET); 1502 writel((par->xres*BITS_PER_PIXEL/8), remapped_regs + mmGRAPHIC_PITCH); 1503} 1504 1505 1506/* 1507 * Work out how long the sync pulse lasts 1508 * Value is 1/(time in seconds) 1509 */ 1510static void calc_hsync(struct w100fb_par *par) 1511{ 1512 unsigned long hsync; 1513 struct w100_mode *mode = par->mode; 1514 union crtc_ss_u crtc_ss; 1515 1516 if (mode->pixclk_src == CLK_SRC_XTAL) 1517 hsync=par->mach->xtal_freq; 1518 else 1519 hsync=((par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq)*100000; 1520 1521 hsync /= (w100_pwr_state.pclk_cntl.f.pclk_post_div + 1); 1522 1523 crtc_ss.val = readl(remapped_regs + mmCRTC_SS); 1524 if (crtc_ss.val) 1525 par->hsync_len = hsync / (crtc_ss.f.ss_end-crtc_ss.f.ss_start); 1526 else 1527 par->hsync_len = 0; 1528} 1529 1530static void w100_suspend(u32 mode) 1531{ 1532 u32 val; 1533 1534 writel(0x7FFF8000, remapped_regs + mmMC_EXT_MEM_LOCATION); 1535 writel(0x00FF0000, remapped_regs + mmMC_PERF_MON_CNTL); 1536 1537 val = readl(remapped_regs + mmMEM_EXT_TIMING_CNTL); 1538 val &= ~(0x00100000); /* bit20=0 */ 1539 val |= 0xFF000000; /* bit31:24=0xff */ 1540 writel(val, remapped_regs + mmMEM_EXT_TIMING_CNTL); 1541 1542 val = readl(remapped_regs + mmMEM_EXT_CNTL); 1543 val &= ~(0x00040000); /* bit18=0 */ 1544 val |= 0x00080000; /* bit19=1 */ 1545 writel(val, remapped_regs + mmMEM_EXT_CNTL); 1546 1547 udelay(1); /* wait 1us */ 1548 1549 if (mode == W100_SUSPEND_EXTMEM) { 1550 /* CKE: Tri-State */ 1551 val = readl(remapped_regs + mmMEM_EXT_CNTL); 1552 val |= 0x40000000; /* bit30=1 */ 1553 writel(val, remapped_regs + mmMEM_EXT_CNTL); 1554 1555 /* CLK: Stop */ 1556 val = readl(remapped_regs + mmMEM_EXT_CNTL); 1557 val &= ~(0x00000001); /* bit0=0 */ 1558 writel(val, remapped_regs + mmMEM_EXT_CNTL); 1559 } else { 1560 writel(0x00000000, remapped_regs + mmSCLK_CNTL); 1561 writel(0x000000BF, remapped_regs + mmCLK_PIN_CNTL); 1562 writel(0x00000015, remapped_regs + mmPWRMGT_CNTL); 1563 1564 udelay(5); 1565 1566 val = readl(remapped_regs + mmPLL_CNTL); 1567 val |= 0x00000004; /* bit2=1 */ 1568 writel(val, remapped_regs + mmPLL_CNTL); 1569 writel(0x0000001d, remapped_regs + mmPWRMGT_CNTL); 1570 } 1571} 1572 1573static void w100_vsync(void) 1574{ 1575 u32 tmp; 1576 int timeout = 30000; /* VSync timeout = 30[ms] > 16.8[ms] */ 1577 1578 tmp = readl(remapped_regs + mmACTIVE_V_DISP); 1579 1580 /* set vline pos */ 1581 writel((tmp >> 16) & 0x3ff, remapped_regs + mmDISP_INT_CNTL); 1582 1583 /* disable vline irq */ 1584 tmp = readl(remapped_regs + mmGEN_INT_CNTL); 1585 1586 tmp &= ~0x00000002; 1587 writel(tmp, remapped_regs + mmGEN_INT_CNTL); 1588 1589 /* clear vline irq status */ 1590 writel(0x00000002, remapped_regs + mmGEN_INT_STATUS); 1591 1592 /* enable vline irq */ 1593 writel((tmp | 0x00000002), remapped_regs + mmGEN_INT_CNTL); 1594 1595 /* clear vline irq status */ 1596 writel(0x00000002, remapped_regs + mmGEN_INT_STATUS); 1597 1598 while(timeout > 0) { 1599 if (readl(remapped_regs + mmGEN_INT_STATUS) & 0x00000002) 1600 break; 1601 udelay(1); 1602 timeout--; 1603 } 1604 1605 /* disable vline irq */ 1606 writel(tmp, remapped_regs + mmGEN_INT_CNTL); 1607 1608 /* clear vline irq status */ 1609 writel(0x00000002, remapped_regs + mmGEN_INT_STATUS); 1610} 1611 1612static struct platform_driver w100fb_driver = { 1613 .probe = w100fb_probe, 1614 .remove = __devexit_p(w100fb_remove), 1615 .suspend = w100fb_suspend, 1616 .resume = w100fb_resume, 1617 .driver = { 1618 .name = "w100fb", 1619 }, 1620}; 1621 1622int __init w100fb_init(void) 1623{ 1624 return platform_driver_register(&w100fb_driver); 1625} 1626 1627void __exit w100fb_cleanup(void) 1628{ 1629 platform_driver_unregister(&w100fb_driver); 1630} 1631 1632module_init(w100fb_init); 1633module_exit(w100fb_cleanup); 1634 1635MODULE_DESCRIPTION("ATI Imageon w100 framebuffer driver"); 1636MODULE_LICENSE("GPL"); 1637