• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/usb/serial/
1/*
2 * Safe Encapsulated USB Serial Driver
3 *
4 *      Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
5 *      Copyright (C) 2001 Lineo
6 *      Copyright (C) 2001 Hewlett-Packard
7 *
8 *	This program is free software; you can redistribute it and/or modify
9 *	it under the terms of the GNU General Public License as published by
10 *	the Free Software Foundation; either version 2 of the License, or
11 *	(at your option) any later version.
12 *
13 * By:
14 *      Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com>
15 */
16
17/*
18 * The encapsultaion is designed to overcome difficulties with some USB
19 * hardware.
20 *
21 * While the USB protocol has a CRC over the data while in transit, i.e. while
22 * being carried over the bus, there is no end to end protection. If the
23 * hardware has any problems getting the data into or out of the USB transmit
24 * and receive FIFO's then data can be lost.
25 *
26 * This protocol adds a two byte trailer to each USB packet to specify the
27 * number of bytes of valid data and a 10 bit CRC that will allow the receiver
28 * to verify that the entire USB packet was received without error.
29 *
30 * Because in this case the sender and receiver are the class and function
31 * drivers there is now end to end protection.
32 *
33 * There is an additional option that can be used to force all transmitted
34 * packets to be padded to the maximum packet size. This provides a work
35 * around for some devices which have problems with small USB packets.
36 *
37 * Assuming a packetsize of N:
38 *
39 *      0..N-2  data and optional padding
40 *
41 *      N-2     bits 7-2 - number of bytes of valid data
42 *              bits 1-0 top two bits of 10 bit CRC
43 *      N-1     bottom 8 bits of 10 bit CRC
44 *
45 *
46 *      | Data Length       | 10 bit CRC                                |
47 *      + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 +
48 *
49 * The 10 bit CRC is computed across the sent data, followed by the trailer
50 * with the length set and the CRC set to zero. The CRC is then OR'd into
51 * the trailer.
52 *
53 * When received a 10 bit CRC is computed over the entire frame including
54 * the trailer and should be equal to zero.
55 *
56 * Two module parameters are used to control the encapsulation, if both are
57 * turned of the module works as a simple serial device with NO
58 * encapsulation.
59 *
60 * See linux/drivers/usbd/serial_fd for a device function driver
61 * implementation of this.
62 *
63 */
64
65
66#include <linux/kernel.h>
67#include <linux/errno.h>
68#include <linux/gfp.h>
69#include <linux/init.h>
70#include <linux/tty.h>
71#include <linux/tty_driver.h>
72#include <linux/tty_flip.h>
73#include <linux/module.h>
74#include <linux/spinlock.h>
75#include <linux/uaccess.h>
76#include <linux/usb.h>
77#include <linux/usb/serial.h>
78
79
80#ifndef CONFIG_USB_SERIAL_SAFE_PADDED
81#define CONFIG_USB_SERIAL_SAFE_PADDED 0
82#endif
83
84static int debug;
85static int safe = 1;
86static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
87
88#define DRIVER_VERSION "v0.1"
89#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
90#define DRIVER_DESC "USB Safe Encapsulated Serial"
91
92MODULE_AUTHOR(DRIVER_AUTHOR);
93MODULE_DESCRIPTION(DRIVER_DESC);
94MODULE_LICENSE("GPL");
95
96static __u16 vendor;		/* no default */
97static __u16 product;		/* no default */
98module_param(vendor, ushort, 0);
99MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)");
100module_param(product, ushort, 0);
101MODULE_PARM_DESC(product, "User specified USB idProduct (required)");
102
103module_param(debug, bool, S_IRUGO | S_IWUSR);
104MODULE_PARM_DESC(debug, "Debug enabled or not");
105
106module_param(safe, bool, 0);
107MODULE_PARM_DESC(safe, "Turn Safe Encapsulation On/Off");
108
109module_param(padded, bool, 0);
110MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off");
111
112#define CDC_DEVICE_CLASS                        0x02
113
114#define CDC_INTERFACE_CLASS                     0x02
115#define CDC_INTERFACE_SUBCLASS                  0x06
116
117#define LINEO_INTERFACE_CLASS                   0xff
118
119#define LINEO_INTERFACE_SUBCLASS_SAFENET        0x01
120#define LINEO_SAFENET_CRC                       0x01
121#define LINEO_SAFENET_CRC_PADDED                0x02
122
123#define LINEO_INTERFACE_SUBCLASS_SAFESERIAL     0x02
124#define LINEO_SAFESERIAL_CRC                    0x01
125#define LINEO_SAFESERIAL_CRC_PADDED             0x02
126
127
128#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \
129	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
130		       USB_DEVICE_ID_MATCH_DEV_CLASS | \
131		       USB_DEVICE_ID_MATCH_INT_CLASS | \
132		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
133	.idVendor = (vend), \
134	.idProduct = (prod),\
135	.bDeviceClass = (dc),\
136	.bInterfaceClass = (ic), \
137	.bInterfaceSubClass = (isc),
138
139static struct usb_device_id id_table[] = {
140	{MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Itsy */
141	{MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Calypso */
142	{MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Iris */
143	{MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
144	{MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
145	{MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
146	{MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Sharp tmp */
147	/* extra null entry for module vendor/produc parameters */
148	{MY_USB_DEVICE(0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
149	{}			/* terminating entry  */
150};
151
152MODULE_DEVICE_TABLE(usb, id_table);
153
154static struct usb_driver safe_driver = {
155	.name =		"safe_serial",
156	.probe =	usb_serial_probe,
157	.disconnect =	usb_serial_disconnect,
158	.id_table =	id_table,
159	.no_dynamic_id = 	1,
160};
161
162static const __u16 crc10_table[256] = {
163	0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff,
164	0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
165	0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce,
166	0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
167	0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d,
168	0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
169	0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac,
170	0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
171	0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b,
172	0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
173	0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a,
174	0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
175	0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259,
176	0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
177	0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268,
178	0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
179	0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377,
180	0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
181	0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346,
182	0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
183	0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315,
184	0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
185	0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324,
186	0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
187	0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3,
188	0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
189	0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382,
190	0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
191	0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1,
192	0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
193	0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0,
194	0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
195};
196
197#define CRC10_INITFCS     0x000	/* Initial FCS value */
198#define CRC10_GOODFCS     0x000	/* Good final FCS value */
199#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
200
201/**
202 * fcs_compute10 - memcpy and calculate 10 bit CRC across buffer
203 * @sp: pointer to buffer
204 * @len: number of bytes
205 * @fcs: starting FCS
206 *
207 * Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return
208 * new 10 bit FCS.
209 */
210static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs)
211{
212	for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++));
213	return fcs;
214}
215
216static void safe_process_read_urb(struct urb *urb)
217{
218	struct usb_serial_port *port = urb->context;
219	unsigned char *data = urb->transfer_buffer;
220	unsigned char length = urb->actual_length;
221	int actual_length;
222	struct tty_struct *tty;
223	__u16 fcs;
224
225	if (!length)
226		return;
227
228	tty = tty_port_tty_get(&port->port);
229	if (!tty)
230		return;
231
232	if (!safe)
233		goto out;
234
235	fcs = fcs_compute10(data, length, CRC10_INITFCS);
236	if (fcs) {
237		dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
238		goto err;
239	}
240
241	actual_length = data[length - 2] >> 2;
242	if (actual_length > (length - 2)) {
243		dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n",
244				__func__, actual_length, length);
245		goto err;
246	}
247	dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length);
248	length = actual_length;
249out:
250	tty_insert_flip_string(tty, data, length);
251	tty_flip_buffer_push(tty);
252err:
253	tty_kref_put(tty);
254}
255
256static int safe_prepare_write_buffer(struct usb_serial_port *port,
257						void *dest, size_t size)
258{
259	unsigned char *buf = dest;
260	int count;
261	int trailer_len;
262	int pkt_len;
263	__u16 fcs;
264
265	trailer_len = safe ? 2 : 0;
266
267	count = kfifo_out_locked(&port->write_fifo, buf, size - trailer_len,
268								&port->lock);
269	if (!safe)
270		return count;
271
272	/* pad if necessary */
273	if (padded) {
274		pkt_len = size;
275		memset(buf + count, '0', pkt_len - count - trailer_len);
276	} else {
277		pkt_len = count + trailer_len;
278	}
279
280	/* set count */
281	buf[pkt_len - 2] = count << 2;
282	buf[pkt_len - 1] = 0;
283
284	/* compute fcs and insert into trailer */
285	fcs = fcs_compute10(buf, pkt_len, CRC10_INITFCS);
286	buf[pkt_len - 2] |= fcs >> 8;
287	buf[pkt_len - 1] |= fcs & 0xff;
288
289	return pkt_len;
290}
291
292static int safe_startup(struct usb_serial *serial)
293{
294	switch (serial->interface->cur_altsetting->desc.bInterfaceProtocol) {
295	case LINEO_SAFESERIAL_CRC:
296		break;
297	case LINEO_SAFESERIAL_CRC_PADDED:
298		padded = 1;
299		break;
300	default:
301		return -EINVAL;
302	}
303	return 0;
304}
305
306static struct usb_serial_driver safe_device = {
307	.driver = {
308		.owner =	THIS_MODULE,
309		.name =		"safe_serial",
310	},
311	.id_table =		id_table,
312	.usb_driver =		&safe_driver,
313	.num_ports =		1,
314	.process_read_urb =	safe_process_read_urb,
315	.prepare_write_buffer =	safe_prepare_write_buffer,
316	.attach =		safe_startup,
317};
318
319static int __init safe_init(void)
320{
321	int i, retval;
322
323	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
324	       DRIVER_DESC "\n");
325
326	/* if we have vendor / product parameters patch them into id list */
327	if (vendor || product) {
328		printk(KERN_INFO KBUILD_MODNAME ": vendor: %x product: %x\n",
329		       vendor, product);
330
331		for (i = 0; i < ARRAY_SIZE(id_table); i++) {
332			if (!id_table[i].idVendor && !id_table[i].idProduct) {
333				id_table[i].idVendor = vendor;
334				id_table[i].idProduct = product;
335				break;
336			}
337		}
338	}
339
340	retval = usb_serial_register(&safe_device);
341	if (retval)
342		goto failed_usb_serial_register;
343	retval = usb_register(&safe_driver);
344	if (retval)
345		goto failed_usb_register;
346
347	return 0;
348failed_usb_register:
349	usb_serial_deregister(&safe_device);
350failed_usb_serial_register:
351	return retval;
352}
353
354static void __exit safe_exit(void)
355{
356	usb_deregister(&safe_driver);
357	usb_serial_deregister(&safe_device);
358}
359
360module_init(safe_init);
361module_exit(safe_exit);
362