1/* 2 * Initio A100 device driver for Linux. 3 * 4 * Copyright (c) 1994-1998 Initio Corporation 5 * All rights reserved. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2, or (at your option) 10 * any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; see the file COPYING. If not, write to 19 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 25 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Revision History: 34 * 06/18/98 HL, Initial production Version 1.02 35 * 12/19/98 bv, Use spinlocks for 2.1.95 and up 36 * 06/25/02 Doug Ledford <dledford@redhat.com> 37 * - This and the i60uscsi.h file are almost identical, 38 * merged them into a single header used by both .c files. 39 * 14/06/07 Alan Cox <alan@redhat.com> 40 * - Grand cleanup and Linuxisation 41 */ 42 43#define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d" 44 45#define ORC_MAXQUEUE 245 46#define ORC_MAXTAGS 64 47 48#define TOTAL_SG_ENTRY 32 49#define MAX_TARGETS 16 50#define IMAX_CDB 15 51#define SENSE_SIZE 14 52 53/************************************************************************/ 54/* Scatter-Gather Element Structure */ 55/************************************************************************/ 56struct orc_sgent { 57 u32 base; /* Data Pointer */ 58 u32 length; /* Data Length */ 59}; 60 61/* SCSI related definition */ 62#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */ 63#define DISC_ALLOW 0xC0 /* Disconnect is allowed */ 64 65 66#define ORC_OFFSET_SCB 16 67#define ORC_MAX_SCBS 250 68#define MAX_CHANNELS 2 69#define MAX_ESCB_ELE 64 70#define TCF_DRV_255_63 0x0400 71 72/********************************************************/ 73/* Orchid Host Command Set */ 74/********************************************************/ 75#define ORC_CMD_NOP 0x00 /* Host command - NOP */ 76#define ORC_CMD_VERSION 0x01 /* Host command - Get F/W version */ 77#define ORC_CMD_ECHO 0x02 /* Host command - ECHO */ 78#define ORC_CMD_SET_NVM 0x03 /* Host command - Set NVRAM */ 79#define ORC_CMD_GET_NVM 0x04 /* Host command - Get NVRAM */ 80#define ORC_CMD_GET_BUS_STATUS 0x05 /* Host command - Get SCSI bus status */ 81#define ORC_CMD_ABORT_SCB 0x06 /* Host command - Abort SCB */ 82#define ORC_CMD_ISSUE_SCB 0x07 /* Host command - Issue SCB */ 83 84/********************************************************/ 85/* Orchid Register Set */ 86/********************************************************/ 87#define ORC_GINTS 0xA0 /* Global Interrupt Status */ 88#define QINT 0x04 /* Reply Queue Interrupt */ 89#define ORC_GIMSK 0xA1 /* Global Interrupt MASK */ 90#define MQINT 0x04 /* Mask Reply Queue Interrupt */ 91#define ORC_GCFG 0xA2 /* Global Configure */ 92#define EEPRG 0x01 /* Enable EEPROM programming */ 93#define ORC_GSTAT 0xA3 /* Global status */ 94#define WIDEBUS 0x10 /* Wide SCSI Devices connected */ 95#define ORC_HDATA 0xA4 /* Host Data */ 96#define ORC_HCTRL 0xA5 /* Host Control */ 97#define SCSIRST 0x80 /* SCSI bus reset */ 98#define HDO 0x40 /* Host data out */ 99#define HOSTSTOP 0x02 /* Host stop RISC engine */ 100#define DEVRST 0x01 /* Device reset */ 101#define ORC_HSTUS 0xA6 /* Host Status */ 102#define HDI 0x02 /* Host data in */ 103#define RREADY 0x01 /* RISC engine is ready to receive */ 104#define ORC_NVRAM 0xA7 /* Nvram port address */ 105#define SE2CS 0x008 106#define SE2CLK 0x004 107#define SE2DO 0x002 108#define SE2DI 0x001 109#define ORC_PQUEUE 0xA8 /* Posting queue FIFO */ 110#define ORC_PQCNT 0xA9 /* Posting queue FIFO Cnt */ 111#define ORC_RQUEUE 0xAA /* Reply queue FIFO */ 112#define ORC_RQUEUECNT 0xAB /* Reply queue FIFO Cnt */ 113#define ORC_FWBASEADR 0xAC /* Firmware base address */ 114 115#define ORC_EBIOSADR0 0xB0 /* External Bios address */ 116#define ORC_EBIOSADR1 0xB1 /* External Bios address */ 117#define ORC_EBIOSADR2 0xB2 /* External Bios address */ 118#define ORC_EBIOSDATA 0xB3 /* External Bios address */ 119 120#define ORC_SCBSIZE 0xB7 /* SCB size register */ 121#define ORC_SCBBASE0 0xB8 /* SCB base address 0 */ 122#define ORC_SCBBASE1 0xBC /* SCB base address 1 */ 123 124#define ORC_RISCCTL 0xE0 /* RISC Control */ 125#define PRGMRST 0x002 126#define DOWNLOAD 0x001 127#define ORC_PRGMCTR0 0xE2 /* RISC program counter */ 128#define ORC_PRGMCTR1 0xE3 /* RISC program counter */ 129#define ORC_RISCRAM 0xEC /* RISC RAM data port 4 bytes */ 130 131struct orc_extended_scb { /* Extended SCB */ 132 struct orc_sgent sglist[TOTAL_SG_ENTRY]; /*0 Start of SG list */ 133 struct scsi_cmnd *srb; /*50 SRB Pointer */ 134}; 135 136/*********************************************************************** 137 SCSI Control Block 138 139 0x40 bytes long, the last 8 are user bytes 140************************************************************************/ 141struct orc_scb { /* Scsi_Ctrl_Blk */ 142 u8 opcode; /*00 SCB command code&residual */ 143 u8 flags; /*01 SCB Flags */ 144 u8 target; /*02 Target Id */ 145 u8 lun; /*03 Lun */ 146 u32 reserved0; /*04 Reserved for ORCHID must 0 */ 147 u32 xferlen; /*08 Data Transfer Length */ 148 u32 reserved1; /*0C Reserved for ORCHID must 0 */ 149 u32 sg_len; /*10 SG list # * 8 */ 150 u32 sg_addr; /*14 SG List Buf physical Addr */ 151 u32 sg_addrhigh; /*18 SG Buffer high physical Addr */ 152 u8 hastat; /*1C Host Status */ 153 u8 tastat; /*1D Target Status */ 154 u8 status; /*1E SCB status */ 155 u8 link; /*1F Link pointer, default 0xFF */ 156 u8 sense_len; /*20 Sense Allocation Length */ 157 u8 cdb_len; /*21 CDB Length */ 158 u8 ident; /*22 Identify */ 159 u8 tag_msg; /*23 Tag Message */ 160 u8 cdb[IMAX_CDB]; /*24 SCSI CDBs */ 161 u8 scbidx; /*3C Index for this ORCSCB */ 162 u32 sense_addr; /*34 Sense Buffer physical Addr */ 163 164 struct orc_extended_scb *escb; /*38 Extended SCB Pointer */ 165 /* 64bit pointer or 32bit pointer + reserved ? */ 166#ifndef CONFIG_64BIT 167 u8 reserved2[4]; /*3E Reserved for Driver use */ 168#endif 169}; 170 171/* Opcodes of ORCSCB_Opcode */ 172#define ORC_EXECSCSI 0x00 /* SCSI initiator command with residual */ 173#define ORC_BUSDEVRST 0x01 /* SCSI Bus Device Reset */ 174 175/* Status of ORCSCB_Status */ 176#define ORCSCB_COMPLETE 0x00 /* SCB request completed */ 177#define ORCSCB_POST 0x01 /* SCB is posted by the HOST */ 178 179/* Bit Definition for ORCSCB_Flags */ 180#define SCF_DISINT 0x01 /* Disable HOST interrupt */ 181#define SCF_DIR 0x18 /* Direction bits */ 182#define SCF_NO_DCHK 0x00 /* Direction determined by SCSI */ 183#define SCF_DIN 0x08 /* From Target to Initiator */ 184#define SCF_DOUT 0x10 /* From Initiator to Target */ 185#define SCF_NO_XF 0x18 /* No data transfer */ 186#define SCF_POLL 0x40 187 188/* Error Codes for ORCSCB_HaStat */ 189#define HOST_SEL_TOUT 0x11 190#define HOST_DO_DU 0x12 191#define HOST_BUS_FREE 0x13 192#define HOST_BAD_PHAS 0x14 193#define HOST_INV_CMD 0x16 194#define HOST_SCSI_RST 0x1B 195#define HOST_DEV_RST 0x1C 196 197 198/* Error Codes for ORCSCB_TaStat */ 199#define TARGET_CHK_COND 0x02 200#define TARGET_BUSY 0x08 201#define TARGET_TAG_FULL 0x28 202 203 204/*********************************************************************** 205 Target Device Control Structure 206**********************************************************************/ 207 208struct orc_target { 209 u8 TCS_DrvDASD; /* 6 */ 210 u8 TCS_DrvSCSI; /* 7 */ 211 u8 TCS_DrvHead; /* 8 */ 212 u16 TCS_DrvFlags; /* 4 */ 213 u8 TCS_DrvSector; /* 7 */ 214}; 215 216/* Bit Definition for TCF_DrvFlags */ 217#define TCS_DF_NODASD_SUPT 0x20 /* Suppress OS/2 DASD Mgr support */ 218#define TCS_DF_NOSCSI_SUPT 0x40 /* Suppress OS/2 SCSI Mgr support */ 219 220 221/*********************************************************************** 222 Host Adapter Control Structure 223************************************************************************/ 224struct orc_host { 225 unsigned long base; /* Base address */ 226 u8 index; /* Index (Channel)*/ 227 u8 scsi_id; /* H/A SCSI ID */ 228 u8 BIOScfg; /*BIOS configuration */ 229 u8 flags; 230 u8 max_targets; /* SCSI0MAXTags */ 231 struct orc_scb *scb_virt; /* Virtual Pointer to SCB array */ 232 dma_addr_t scb_phys; /* Scb Physical address */ 233 struct orc_extended_scb *escb_virt; /* Virtual pointer to ESCB Scatter list */ 234 dma_addr_t escb_phys; /* scatter list Physical address */ 235 u8 target_flag[16]; /* target configuration, TCF_EN_TAG */ 236 u8 max_tags[16]; /* ORC_MAX_SCBS */ 237 u32 allocation_map[MAX_CHANNELS][8]; /* Max STB is 256, So 256/32 */ 238 spinlock_t allocation_lock; 239 struct pci_dev *pdev; 240}; 241 242/* Bit Definition for HCS_Flags */ 243 244#define HCF_SCSI_RESET 0x01 /* SCSI BUS RESET */ 245#define HCF_PARITY 0x02 /* parity card */ 246#define HCF_LVDS 0x10 /* parity card */ 247 248/* Bit Definition for TargetFlag */ 249 250#define TCF_EN_255 0x08 251#define TCF_EN_TAG 0x10 252#define TCF_BUSY 0x20 253#define TCF_DISCONNECT 0x40 254#define TCF_SPIN_UP 0x80 255 256/* Bit Definition for HCS_AFlags */ 257#define HCS_AF_IGNORE 0x01 /* Adapter ignore */ 258#define HCS_AF_DISABLE_RESET 0x10 /* Adapter disable reset */ 259#define HCS_AF_DISABLE_ADPT 0x80 /* Adapter disable */ 260 261struct orc_nvram { 262/*----------header ---------------*/ 263 u8 SubVendorID0; /* 00 - Sub Vendor ID */ 264 u8 SubVendorID1; /* 00 - Sub Vendor ID */ 265 u8 SubSysID0; /* 02 - Sub System ID */ 266 u8 SubSysID1; /* 02 - Sub System ID */ 267 u8 SubClass; /* 04 - Sub Class */ 268 u8 VendorID0; /* 05 - Vendor ID */ 269 u8 VendorID1; /* 05 - Vendor ID */ 270 u8 DeviceID0; /* 07 - Device ID */ 271 u8 DeviceID1; /* 07 - Device ID */ 272 u8 Reserved0[2]; /* 09 - Reserved */ 273 u8 revision; /* 0B - revision of data structure */ 274 /* ----Host Adapter Structure ---- */ 275 u8 NumOfCh; /* 0C - Number of SCSI channel */ 276 u8 BIOSConfig1; /* 0D - BIOS configuration 1 */ 277 u8 BIOSConfig2; /* 0E - BIOS boot channel&target ID */ 278 u8 BIOSConfig3; /* 0F - BIOS configuration 3 */ 279 /* ----SCSI channel Structure ---- */ 280 /* from "CTRL-I SCSI Host Adapter SetUp menu " */ 281 u8 scsi_id; /* 10 - Channel 0 SCSI ID */ 282 u8 SCSI0Config; /* 11 - Channel 0 SCSI configuration */ 283 u8 SCSI0MaxTags; /* 12 - Channel 0 Maximum tags */ 284 u8 SCSI0ResetTime; /* 13 - Channel 0 Reset recovering time */ 285 u8 ReservedforChannel0[2]; /* 14 - Reserved */ 286 287 /* ----SCSI target Structure ---- */ 288 /* from "CTRL-I SCSI device SetUp menu " */ 289 u8 Target00Config; /* 16 - Channel 0 Target 0 config */ 290 u8 Target01Config; /* 17 - Channel 0 Target 1 config */ 291 u8 Target02Config; /* 18 - Channel 0 Target 2 config */ 292 u8 Target03Config; /* 19 - Channel 0 Target 3 config */ 293 u8 Target04Config; /* 1A - Channel 0 Target 4 config */ 294 u8 Target05Config; /* 1B - Channel 0 Target 5 config */ 295 u8 Target06Config; /* 1C - Channel 0 Target 6 config */ 296 u8 Target07Config; /* 1D - Channel 0 Target 7 config */ 297 u8 Target08Config; /* 1E - Channel 0 Target 8 config */ 298 u8 Target09Config; /* 1F - Channel 0 Target 9 config */ 299 u8 Target0AConfig; /* 20 - Channel 0 Target A config */ 300 u8 Target0BConfig; /* 21 - Channel 0 Target B config */ 301 u8 Target0CConfig; /* 22 - Channel 0 Target C config */ 302 u8 Target0DConfig; /* 23 - Channel 0 Target D config */ 303 u8 Target0EConfig; /* 24 - Channel 0 Target E config */ 304 u8 Target0FConfig; /* 25 - Channel 0 Target F config */ 305 306 u8 SCSI1Id; /* 26 - Channel 1 SCSI ID */ 307 u8 SCSI1Config; /* 27 - Channel 1 SCSI configuration */ 308 u8 SCSI1MaxTags; /* 28 - Channel 1 Maximum tags */ 309 u8 SCSI1ResetTime; /* 29 - Channel 1 Reset recovering time */ 310 u8 ReservedforChannel1[2]; /* 2A - Reserved */ 311 312 /* ----SCSI target Structure ---- */ 313 /* from "CTRL-I SCSI device SetUp menu " */ 314 u8 Target10Config; /* 2C - Channel 1 Target 0 config */ 315 u8 Target11Config; /* 2D - Channel 1 Target 1 config */ 316 u8 Target12Config; /* 2E - Channel 1 Target 2 config */ 317 u8 Target13Config; /* 2F - Channel 1 Target 3 config */ 318 u8 Target14Config; /* 30 - Channel 1 Target 4 config */ 319 u8 Target15Config; /* 31 - Channel 1 Target 5 config */ 320 u8 Target16Config; /* 32 - Channel 1 Target 6 config */ 321 u8 Target17Config; /* 33 - Channel 1 Target 7 config */ 322 u8 Target18Config; /* 34 - Channel 1 Target 8 config */ 323 u8 Target19Config; /* 35 - Channel 1 Target 9 config */ 324 u8 Target1AConfig; /* 36 - Channel 1 Target A config */ 325 u8 Target1BConfig; /* 37 - Channel 1 Target B config */ 326 u8 Target1CConfig; /* 38 - Channel 1 Target C config */ 327 u8 Target1DConfig; /* 39 - Channel 1 Target D config */ 328 u8 Target1EConfig; /* 3A - Channel 1 Target E config */ 329 u8 Target1FConfig; /* 3B - Channel 1 Target F config */ 330 u8 reserved[3]; /* 3C - Reserved */ 331 /* ---------- CheckSum ---------- */ 332 u8 CheckSum; /* 3F - Checksum of NVRam */ 333}; 334 335/* Bios Configuration for nvram->BIOSConfig1 */ 336#define NBC_BIOSENABLE 0x01 /* BIOS enable */ 337#define NBC_CDROM 0x02 /* Support bootable CDROM */ 338#define NBC_REMOVABLE 0x04 /* Support removable drive */ 339 340/* Bios Configuration for nvram->BIOSConfig2 */ 341#define NBB_TARGET_MASK 0x0F /* Boot SCSI target ID number */ 342#define NBB_CHANL_MASK 0xF0 /* Boot SCSI channel number */ 343 344/* Bit definition for nvram->SCSIConfig */ 345#define NCC_BUSRESET 0x01 /* Reset SCSI bus at power up */ 346#define NCC_PARITYCHK 0x02 /* SCSI parity enable */ 347#define NCC_LVDS 0x10 /* Enable LVDS */ 348#define NCC_ACTTERM1 0x20 /* Enable active terminator 1 */ 349#define NCC_ACTTERM2 0x40 /* Enable active terminator 2 */ 350#define NCC_AUTOTERM 0x80 /* Enable auto termination */ 351 352/* Bit definition for nvram->TargetxConfig */ 353#define NTC_PERIOD 0x07 /* Maximum Sync. Speed */ 354#define NTC_1GIGA 0x08 /* 255 head / 63 sectors (64/32) */ 355#define NTC_NO_SYNC 0x10 /* NO SYNC. NEGO */ 356#define NTC_NO_WIDESYNC 0x20 /* NO WIDE SYNC. NEGO */ 357#define NTC_DISC_ENABLE 0x40 /* Enable SCSI disconnect */ 358#define NTC_SPINUP 0x80 /* Start disk drive */ 359 360/* Default NVRam values */ 361#define NBC_DEFAULT (NBC_ENABLE) 362#define NCC_DEFAULT (NCC_BUSRESET | NCC_AUTOTERM | NCC_PARITYCHK) 363#define NCC_MAX_TAGS 0x20 /* Maximum tags per target */ 364#define NCC_RESET_TIME 0x0A /* SCSI RESET recovering time */ 365#define NTC_DEFAULT (NTC_1GIGA | NTC_NO_WIDESYNC | NTC_DISC_ENABLE) 366