1 2/* 3 * snull.h -- definitions for the network module 4 * 5 * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet 6 * Copyright (C) 2001 O'Reilly & Associates 7 * 8 * The source code in this file can be freely used, adapted, 9 * and redistributed in source or binary form, so long as an 10 * acknowledgment appears in derived source files. The citation 11 * should list that the code comes from the book "Linux Device 12 * Drivers" by Alessandro Rubini and Jonathan Corbet, published 13 * by O'Reilly & Associates. No warranty is attached; 14 * we cannot take responsibility for errors or fitness for use. 15 */ 16 17/* version dependencies have been confined to a separate file */ 18 19/* Tunable parameters */ 20#define TX_RING_ENTRIES 64 /* 64-512?*/ 21 22#define RX_RING_ENTRIES 16 /* Do not change */ 23/* Internal constants */ 24#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet)) 25#define RX_BUFFER_SIZE 1546 /* ethenet packet size */ 26#define METH_RX_BUFF_SIZE 4096 27#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */ 28#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */ 29#define RX_BUCKET_SIZE 256 30 31/* For more detailed explanations of what each field menas, 32 see Nick's great comments to #defines below (or docs, if 33 you are lucky enough toget hold of them :)*/ 34 35/* tx status vector is written over tx command header upon 36 dma completion. */ 37 38typedef struct tx_status_vector { 39 u64 sent:1; /* always set to 1...*/ 40 u64 pad0:34;/* always set to 0 */ 41 u64 flags:9; /*I'm too lazy to specify each one separately at the moment*/ 42 u64 col_retry_cnt:4; /*collision retry count*/ 43 u64 len:16; /*Transmit length in bytes*/ 44} tx_status_vector; 45 46/* 47 * Each packet is 128 bytes long. 48 * It consists of header, 0-3 concatination 49 * buffer pointers and up to 120 data bytes. 50 */ 51typedef struct tx_packet_hdr { 52 u64 pad1:36; /*should be filled with 0 */ 53 u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/ 54 cat_ptr2_valid:1, 55 cat_ptr1_valid:1; 56 u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/ 57 u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/ 58 u64 data_offset:7; /*Starting byte offset in ring data block*/ 59 u64 data_len:16; /*Length of valid data in bytes-1*/ 60} tx_packet_hdr; 61typedef union tx_cat_ptr { 62 struct { 63 u64 pad2:16; /* should be 0 */ 64 u64 len:16; /*length of buffer data - 1*/ 65 u64 start_addr:29; /*Physical starting address*/ 66 u64 pad1:3; /* should be zero */ 67 } form; 68 u64 raw; 69} tx_cat_ptr; 70 71typedef struct tx_packet { 72 union { 73 tx_packet_hdr header; 74 tx_status_vector res; 75 u64 raw; 76 }header; 77 union { 78 tx_cat_ptr cat_buf[3]; 79 char dt[120]; 80 } data; 81} tx_packet; 82 83typedef union rx_status_vector { 84 volatile struct { 85 u64 pad1:1;/*fill it with ones*/ 86 u64 pad2:15;/*fill with 0*/ 87 u64 ip_chk_sum:16; 88 u64 seq_num:5; 89 u64 mac_addr_match:1; 90 u64 mcast_addr_match:1; 91 u64 carrier_event_seen:1; 92 u64 bad_packet:1; 93 u64 long_event_seen:1; 94 u64 invalid_preamble:1; 95 u64 broadcast:1; 96 u64 multicast:1; 97 u64 crc_error:1; 98 u64 huh:1;/*???*/ 99 u64 rx_code_violation:1; 100 u64 rx_len:16; 101 } parsed; 102 volatile u64 raw; 103} rx_status_vector; 104 105typedef struct rx_packet { 106 rx_status_vector status; 107 u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */ 108 u16 pad2; 109 char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */ 110} rx_packet; 111 112#define TX_INFO_RPTR 0x00FF0000 113#define TX_INFO_WPTR 0x000000FF 114 115 /* Bits in METH_MAC */ 116 117#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */ 118#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */ 119#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */ 120 /* selects ignored */ 121#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */ 122#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */ 123 /* Note: when loopback is set this bit becomes collision control. Setting this bit will */ 124 /* cause a collision to be reported. */ 125 126 /* Bits 5 and 6 are used to determine the Destination address filter mode */ 127#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */ 128#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */ 129#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */ 130#define METH_PROMISC 0x60 /* 11: Promiscious mode */ 131 132#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */ 133 134#define METH_MAC_IPG 0x1ffff00 135 136#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8)) 137 /* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/ 138 /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */ 139 /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */ 140 /* per increment for 10BaseT */ 141 142 /* Bits 15 through 21 are used to determine IPGR1 */ 143 144 /* Bits 22 through 28 are used to determine IPGR2 */ 145 146#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */ 147 /* 000: Inital revision */ 148 /* 001: First revision, Improved TX concatenation */ 149 150 151/* DMA control bits */ 152#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */ 153#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */ 154 155#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */ 156#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */ 157#define METH_DMA_RX_EN BIT(15) /* Enable RX */ 158#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */ 159 160/* RX FIFO MCL Info bits */ 161#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf) 162#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf) 163#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f) 164 165/* RX status bits */ 166 167#define METH_RX_ST_VALID BIT(63) 168#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16) 169#define METH_RX_ST_DRBL_NBL BIT(17) 170#define METH_RX_ST_CRC_ERR BIT(18) 171#define METH_RX_ST_MCAST_PKT BIT(19) 172#define METH_RX_ST_BCAST_PKT BIT(20) 173#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21) 174#define METH_RX_ST_LONG_EVT_SEEN BIT(22) 175#define METH_RX_ST_BAD_PACKET BIT(23) 176#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24) 177#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25) 178#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26) 179 180#define METH_RX_STATUS_ERRORS \ 181 ( \ 182 METH_RX_ST_RCV_CODE_VIOLATION| \ 183 METH_RX_ST_CRC_ERR| \ 184 METH_RX_ST_INV_PREAMBLE_CTX| \ 185 METH_RX_ST_LONG_EVT_SEEN| \ 186 METH_RX_ST_BAD_PACKET| \ 187 METH_RX_ST_CARRIER_EVT_SEEN \ 188 ) 189 /* Bits in METH_INT */ 190 /* Write _1_ to corresponding bit to clear */ 191#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */ 192#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */ 193 /* 1: A TX message had the INT request bit set, the packet has been sent. */ 194#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */ 195#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */ 196 /* 1: A memory error occurred durring DMA, DMA stopped, Fatal */ 197#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */ 198#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */ 199#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */ 200#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */ 201 202/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */ 203#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/ 204 205 /* Bits 13 through 15 are always 0. */ 206 207#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */ 208 209#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */ 210 211 /* top of the queue */ 212 213#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \ 214 METH_INT_MEM_ERROR| \ 215 METH_INT_TX_ABORT| \ 216 METH_INT_RX_OVERFLOW| \ 217 METH_INT_RX_UNDERFLOW) 218 219#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */ 220 221/* TX status bits */ 222#define METH_TX_ST_DONE BIT(63) /* TX complete */ 223#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */ 224#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */ 225#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */ 226#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */ 227#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */ 228#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */ 229 230 231/* Tx command header bits */ 232#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */ 233 234/* Phy MDIO interface busy flag */ 235#define MDIO_BUSY BIT(16) 236#define MDIO_DATA_MASK 0xFFFF 237/* PHY defines */ 238#define PHY_QS6612X 0x0181441 /* Quality TX */ 239#define PHY_ICS1889 0x0015F41 /* ICS FX */ 240#define PHY_ICS1890 0x0015F42 /* ICS TX */ 241#define PHY_DP83840 0x20005C0 /* National TX */ 242 243#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1) 244