1/***************************************************************************** 2* 3* Filename: mcs7780.c 4* Version: 0.4-alpha 5* Description: Irda MosChip USB Dongle Driver 6* Authors: Lukasz Stelmach <stlman@poczta.fm> 7* Brian Pugh <bpugh@cs.pdx.edu> 8* Judy Fischbach <jfisch@cs.pdx.edu> 9* 10* Based on stir4200 driver, but some things done differently. 11* Based on earlier driver by Paul Stewart <stewart@parc.com> 12* 13* Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at> 14* Copyright (C) 2001, Dag Brattli <dag@brattli.net> 15* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com> 16* Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org> 17* Copyright (C) 2005, Lukasz Stelmach <stlman@poczta.fm> 18* Copyright (C) 2005, Brian Pugh <bpugh@cs.pdx.edu> 19* Copyright (C) 2005, Judy Fischbach <jfisch@cs.pdx.edu> 20* 21* This program is free software; you can redistribute it and/or modify 22* it under the terms of the GNU General Public License as published by 23* the Free Software Foundation; either version 2 of the License, or 24* (at your option) any later version. 25* 26* This program is distributed in the hope that it will be useful, 27* but WITHOUT ANY WARRANTY; without even the implied warranty of 28* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 29* GNU General Public License for more details. 30* 31* You should have received a copy of the GNU General Public License 32* along with this program; if not, write to the Free Software 33* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 34* 35*****************************************************************************/ 36 37/* 38 * MCS7780 is a simple USB to IrDA bridge by MosChip. It is neither 39 * compatibile with irda-usb nor with stir4200. Although it is quite 40 * similar to the later as far as general idea of operation is concerned. 41 * That is it requires the software to do all the framing job at SIR speeds. 42 * The hardware does take care of the framing at MIR and FIR speeds. 43 * It supports all speeds from 2400 through 4Mbps 44 */ 45 46#include <linux/module.h> 47#include <linux/moduleparam.h> 48#include <linux/kernel.h> 49#include <linux/types.h> 50#include <linux/errno.h> 51#include <linux/init.h> 52#include <linux/slab.h> 53#include <linux/usb.h> 54#include <linux/device.h> 55#include <linux/crc32.h> 56 57#include <asm/unaligned.h> 58#include <asm/byteorder.h> 59#include <asm/uaccess.h> 60 61#include <net/irda/irda.h> 62#include <net/irda/wrapper.h> 63#include <net/irda/crc.h> 64 65#include "mcs7780.h" 66 67#define MCS_VENDOR_ID 0x9710 68#define MCS_PRODUCT_ID 0x7780 69 70static struct usb_device_id mcs_table[] = { 71 /* MosChip Corp., MCS7780 FIR-USB Adapter */ 72 {USB_DEVICE(MCS_VENDOR_ID, MCS_PRODUCT_ID)}, 73 {}, 74}; 75 76MODULE_AUTHOR("Brian Pugh <bpugh@cs.pdx.edu>"); 77MODULE_DESCRIPTION("IrDA-USB Dongle Driver for MosChip MCS7780"); 78MODULE_VERSION("0.3alpha"); 79MODULE_LICENSE("GPL"); 80 81MODULE_DEVICE_TABLE(usb, mcs_table); 82 83static int qos_mtt_bits = 0x07 /* > 1ms */ ; 84module_param(qos_mtt_bits, int, 0); 85MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time"); 86 87static int receive_mode = 0x1; 88module_param(receive_mode, int, 0); 89MODULE_PARM_DESC(receive_mode, 90 "Receive mode of the device (1:fast, 0:slow, default:1)"); 91 92static int sir_tweak = 1; 93module_param(sir_tweak, int, 0444); 94MODULE_PARM_DESC(sir_tweak, 95 "Default pulse width (1:1.6us, 0:3/16 bit, default:1)."); 96 97static int transceiver_type = MCS_TSC_VISHAY; 98module_param(transceiver_type, int, 0444); 99MODULE_PARM_DESC(transceiver_type, "IR transceiver type, see mcs7780.h."); 100 101static struct usb_driver mcs_driver = { 102 .name = "mcs7780", 103 .probe = mcs_probe, 104 .disconnect = mcs_disconnect, 105 .id_table = mcs_table, 106}; 107 108/* speed flag selection by direct addressing. 109addr = (speed >> 8) & 0x0f 110 1110x1 57600 0x2 115200 0x4 1152000 0x5 9600 1120x6 38400 0x9 2400 0xa 576000 0xb 19200 113 1144Mbps (or 2400) must be checked separately. Since it also has 115to be programmed in a different manner that is not a big problem. 116*/ 117static __u16 mcs_speed_set[16] = { 0, 118 MCS_SPEED_57600, 119 MCS_SPEED_115200, 120 0, 121 MCS_SPEED_1152000, 122 MCS_SPEED_9600, 123 MCS_SPEED_38400, 124 0, 0, 125 MCS_SPEED_2400, 126 MCS_SPEED_576000, 127 MCS_SPEED_19200, 128 0, 0, 0, 129}; 130 131/* Set given 16 bit register with a 16 bit value. Send control message 132 * to set dongle register. */ 133static int mcs_set_reg(struct mcs_cb *mcs, __u16 reg, __u16 val) 134{ 135 struct usb_device *dev = mcs->usbdev; 136 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, 137 MCS_WR_RTYPE, val, reg, NULL, 0, 138 msecs_to_jiffies(MCS_CTRL_TIMEOUT)); 139} 140 141/* Get 16 bit register value. Send contol message to read dongle register. */ 142static int mcs_get_reg(struct mcs_cb *mcs, __u16 reg, __u16 * val) 143{ 144 struct usb_device *dev = mcs->usbdev; 145 int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, 146 MCS_RD_RTYPE, 0, reg, val, 2, 147 msecs_to_jiffies(MCS_CTRL_TIMEOUT)); 148 149 return ret; 150} 151 152/* Setup a communication between mcs7780 and TFDU chips. It is described 153 * in more detail in the data sheet. The setup sequence puts the the 154 * vishay tranceiver into high speed mode. It will also receive SIR speed 155 * packets but at reduced sensitivity. 156 */ 157 158/* 0: OK 1:ERROR */ 159static inline int mcs_setup_transceiver_vishay(struct mcs_cb *mcs) 160{ 161 int ret = 0; 162 __u16 rval; 163 164 /* mcs_get_reg should read exactly two bytes from the dongle */ 165 ret = mcs_get_reg(mcs, MCS_XCVR_REG, &rval); 166 if (unlikely(ret != 2)) { 167 ret = -EIO; 168 goto error; 169 } 170 171 /* The MCS_XCVR_CONF bit puts the transceiver into configuration 172 * mode. The MCS_MODE0 bit must start out high (1) and then 173 * transition to low and the MCS_STFIR and MCS_MODE1 bits must 174 * be low. 175 */ 176 rval |= (MCS_MODE0 | MCS_XCVR_CONF); 177 rval &= ~MCS_STFIR; 178 rval &= ~MCS_MODE1; 179 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval); 180 if (unlikely(ret)) 181 goto error; 182 183 rval &= ~MCS_MODE0; 184 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval); 185 if (unlikely(ret)) 186 goto error; 187 188 rval &= ~MCS_XCVR_CONF; 189 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval); 190 if (unlikely(ret)) 191 goto error; 192 193 ret = 0; 194 error: 195 return ret; 196} 197 198/* Setup a communication between mcs7780 and agilent chip. */ 199static inline int mcs_setup_transceiver_agilent(struct mcs_cb *mcs) 200{ 201 IRDA_WARNING("This transceiver type is not supported yet.\n"); 202 return 1; 203} 204 205/* Setup a communication between mcs7780 and sharp chip. */ 206static inline int mcs_setup_transceiver_sharp(struct mcs_cb *mcs) 207{ 208 IRDA_WARNING("This transceiver type is not supported yet.\n"); 209 return 1; 210} 211 212/* Common setup for all transceivers */ 213static inline int mcs_setup_transceiver(struct mcs_cb *mcs) 214{ 215 int ret = 0; 216 __u16 rval; 217 char *msg; 218 219 msg = "Basic transceiver setup error."; 220 221 /* read value of MODE Register, set the DRIVER and RESET bits 222 * and write value back out to MODE Register 223 */ 224 ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval); 225 if(unlikely(ret != 2)) 226 goto error; 227 rval |= MCS_DRIVER; /* put the mcs7780 into configuration mode. */ 228 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval); 229 if(unlikely(ret)) 230 goto error; 231 232 rval = 0; /* set min pulse width to 0 initially. */ 233 ret = mcs_set_reg(mcs, MCS_MINRXPW_REG, rval); 234 if(unlikely(ret)) 235 goto error; 236 237 ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval); 238 if(unlikely(ret != 2)) 239 goto error; 240 241 rval &= ~MCS_FIR; /* turn off fir mode. */ 242 if(mcs->sir_tweak) 243 rval |= MCS_SIR16US; /* 1.6us pulse width */ 244 else 245 rval &= ~MCS_SIR16US; /* 3/16 bit time pulse width */ 246 247 /* make sure ask mode and back to back packets are off. */ 248 rval &= ~(MCS_BBTG | MCS_ASK); 249 250 rval &= ~MCS_SPEED_MASK; 251 rval |= MCS_SPEED_9600; /* make sure initial speed is 9600. */ 252 mcs->speed = 9600; 253 mcs->new_speed = 0; /* new_speed is set to 0 */ 254 rval &= ~MCS_PLLPWDN; /* disable power down. */ 255 256 /* make sure device determines direction and that the auto send sip 257 * pulse are on. 258 */ 259 rval |= MCS_DTD | MCS_SIPEN; 260 261 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval); 262 if(unlikely(ret)) 263 goto error; 264 265 msg = "transceiver model specific setup error."; 266 switch (mcs->transceiver_type) { 267 case MCS_TSC_VISHAY: 268 ret = mcs_setup_transceiver_vishay(mcs); 269 break; 270 271 case MCS_TSC_SHARP: 272 ret = mcs_setup_transceiver_sharp(mcs); 273 break; 274 275 case MCS_TSC_AGILENT: 276 ret = mcs_setup_transceiver_agilent(mcs); 277 break; 278 279 default: 280 IRDA_WARNING("Unknown transceiver type: %d\n", 281 mcs->transceiver_type); 282 ret = 1; 283 } 284 if (unlikely(ret)) 285 goto error; 286 287 /* If transceiver is not SHARP, then if receive mode set 288 * on the RXFAST bit in the XCVR Register otherwise unset it 289 */ 290 if (mcs->transceiver_type != MCS_TSC_SHARP) { 291 292 ret = mcs_get_reg(mcs, MCS_XCVR_REG, &rval); 293 if (unlikely(ret != 2)) 294 goto error; 295 if (mcs->receive_mode) 296 rval |= MCS_RXFAST; 297 else 298 rval &= ~MCS_RXFAST; 299 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval); 300 if (unlikely(ret)) 301 goto error; 302 } 303 304 msg = "transceiver reset."; 305 306 ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval); 307 if (unlikely(ret != 2)) 308 goto error; 309 310 /* reset the mcs7780 so all changes take effect. */ 311 rval &= ~MCS_RESET; 312 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval); 313 if (unlikely(ret)) 314 goto error; 315 else 316 return ret; 317 318error: 319 IRDA_ERROR("%s\n", msg); 320 return ret; 321} 322 323/* Wraps the data in format for SIR */ 324static inline int mcs_wrap_sir_skb(struct sk_buff *skb, __u8 * buf) 325{ 326 int wraplen; 327 328 /* 2: full frame length, including "the length" */ 329 wraplen = async_wrap_skb(skb, buf + 2, 4094); 330 331 wraplen += 2; 332 buf[0] = wraplen & 0xff; 333 buf[1] = (wraplen >> 8) & 0xff; 334 335 return wraplen; 336} 337 338/* Wraps the data in format for FIR */ 339static unsigned mcs_wrap_fir_skb(const struct sk_buff *skb, __u8 *buf) 340{ 341 unsigned int len = 0; 342 __u32 fcs = ~(crc32_le(~0, skb->data, skb->len)); 343 344 /* add 2 bytes for length value and 4 bytes for fcs. */ 345 len = skb->len + 6; 346 347 /* The mcs7780 requires that the first two bytes are the packet 348 * length in little endian order. Note: the length value includes 349 * the two bytes for the length value itself. 350 */ 351 buf[0] = len & 0xff; 352 buf[1] = (len >> 8) & 0xff; 353 /* copy the data into the tx buffer. */ 354 skb_copy_from_linear_data(skb, buf + 2, skb->len); 355 /* put the fcs in the last four bytes in little endian order. */ 356 buf[len - 4] = fcs & 0xff; 357 buf[len - 3] = (fcs >> 8) & 0xff; 358 buf[len - 2] = (fcs >> 16) & 0xff; 359 buf[len - 1] = (fcs >> 24) & 0xff; 360 361 return len; 362} 363 364/* Wraps the data in format for MIR */ 365static unsigned mcs_wrap_mir_skb(const struct sk_buff *skb, __u8 *buf) 366{ 367 __u16 fcs = 0; 368 int len = skb->len + 4; 369 370 fcs = ~(irda_calc_crc16(~fcs, skb->data, skb->len)); 371 /* put the total packet length in first. Note: packet length 372 * value includes the two bytes that hold the packet length 373 * itself. 374 */ 375 buf[0] = len & 0xff; 376 buf[1] = (len >> 8) & 0xff; 377 /* copy the data */ 378 skb_copy_from_linear_data(skb, buf + 2, skb->len); 379 /* put the fcs in last two bytes in little endian order. */ 380 buf[len - 2] = fcs & 0xff; 381 buf[len - 1] = (fcs >> 8) & 0xff; 382 383 return len; 384} 385 386/* Unwrap received packets at MIR speed. A 16 bit crc_ccitt checksum is 387 * used for the fcs. When performed over the entire packet the result 388 * should be GOOD_FCS = 0xf0b8. Hands the unwrapped data off to the IrDA 389 * layer via a sk_buff. 390 */ 391static void mcs_unwrap_mir(struct mcs_cb *mcs, __u8 *buf, int len) 392{ 393 __u16 fcs; 394 int new_len; 395 struct sk_buff *skb; 396 397 /* Assume that the frames are going to fill a single packet 398 * rather than span multiple packets. 399 */ 400 401 new_len = len - 2; 402 if(unlikely(new_len <= 0)) { 403 IRDA_ERROR("%s short frame length %d\n", 404 mcs->netdev->name, new_len); 405 ++mcs->netdev->stats.rx_errors; 406 ++mcs->netdev->stats.rx_length_errors; 407 return; 408 } 409 fcs = 0; 410 fcs = irda_calc_crc16(~fcs, buf, len); 411 412 if(fcs != GOOD_FCS) { 413 IRDA_ERROR("crc error calc 0x%x len %d\n", 414 fcs, new_len); 415 mcs->netdev->stats.rx_errors++; 416 mcs->netdev->stats.rx_crc_errors++; 417 return; 418 } 419 420 skb = dev_alloc_skb(new_len + 1); 421 if(unlikely(!skb)) { 422 ++mcs->netdev->stats.rx_dropped; 423 return; 424 } 425 426 skb_reserve(skb, 1); 427 skb_copy_to_linear_data(skb, buf, new_len); 428 skb_put(skb, new_len); 429 skb_reset_mac_header(skb); 430 skb->protocol = htons(ETH_P_IRDA); 431 skb->dev = mcs->netdev; 432 433 netif_rx(skb); 434 435 mcs->netdev->stats.rx_packets++; 436 mcs->netdev->stats.rx_bytes += new_len; 437} 438 439/* Unwrap received packets at FIR speed. A 32 bit crc_ccitt checksum is 440 * used for the fcs. Hands the unwrapped data off to the IrDA 441 * layer via a sk_buff. 442 */ 443static void mcs_unwrap_fir(struct mcs_cb *mcs, __u8 *buf, int len) 444{ 445 __u32 fcs; 446 int new_len; 447 struct sk_buff *skb; 448 449 /* Assume that the frames are going to fill a single packet 450 * rather than span multiple packets. This is most likely a false 451 * assumption. 452 */ 453 454 new_len = len - 4; 455 if(unlikely(new_len <= 0)) { 456 IRDA_ERROR("%s short frame length %d\n", 457 mcs->netdev->name, new_len); 458 ++mcs->netdev->stats.rx_errors; 459 ++mcs->netdev->stats.rx_length_errors; 460 return; 461 } 462 463 fcs = ~(crc32_le(~0, buf, new_len)); 464 if(fcs != get_unaligned_le32(buf + new_len)) { 465 IRDA_ERROR("crc error calc 0x%x len %d\n", fcs, new_len); 466 mcs->netdev->stats.rx_errors++; 467 mcs->netdev->stats.rx_crc_errors++; 468 return; 469 } 470 471 skb = dev_alloc_skb(new_len + 1); 472 if(unlikely(!skb)) { 473 ++mcs->netdev->stats.rx_dropped; 474 return; 475 } 476 477 skb_reserve(skb, 1); 478 skb_copy_to_linear_data(skb, buf, new_len); 479 skb_put(skb, new_len); 480 skb_reset_mac_header(skb); 481 skb->protocol = htons(ETH_P_IRDA); 482 skb->dev = mcs->netdev; 483 484 netif_rx(skb); 485 486 mcs->netdev->stats.rx_packets++; 487 mcs->netdev->stats.rx_bytes += new_len; 488} 489 490 491/* Allocates urbs for both receive and transmit. 492 * If alloc fails return error code 0 (fail) otherwise 493 * return error code 1 (success). 494 */ 495static inline int mcs_setup_urbs(struct mcs_cb *mcs) 496{ 497 mcs->rx_urb = NULL; 498 499 mcs->tx_urb = usb_alloc_urb(0, GFP_KERNEL); 500 if (!mcs->tx_urb) 501 return 0; 502 503 mcs->rx_urb = usb_alloc_urb(0, GFP_KERNEL); 504 if (!mcs->rx_urb) 505 return 0; 506 507 return 1; 508} 509 510/* Sets up state to be initially outside frame, gets receive urb, 511 * sets status to successful and then submits the urb to start 512 * receiving the data. 513 */ 514static inline int mcs_receive_start(struct mcs_cb *mcs) 515{ 516 mcs->rx_buff.in_frame = FALSE; 517 mcs->rx_buff.state = OUTSIDE_FRAME; 518 519 usb_fill_bulk_urb(mcs->rx_urb, mcs->usbdev, 520 usb_rcvbulkpipe(mcs->usbdev, mcs->ep_in), 521 mcs->in_buf, 4096, mcs_receive_irq, mcs); 522 523 mcs->rx_urb->status = 0; 524 return usb_submit_urb(mcs->rx_urb, GFP_KERNEL); 525} 526 527/* Finds the in and out endpoints for the mcs control block */ 528static inline int mcs_find_endpoints(struct mcs_cb *mcs, 529 struct usb_host_endpoint *ep, int epnum) 530{ 531 int i; 532 int ret = 0; 533 534 /* If no place to store the endpoints just return */ 535 if (!ep) 536 return ret; 537 538 /* cycle through all endpoints, find the first two that are DIR_IN */ 539 for (i = 0; i < epnum; i++) { 540 if (ep[i].desc.bEndpointAddress & USB_DIR_IN) 541 mcs->ep_in = ep[i].desc.bEndpointAddress; 542 else 543 mcs->ep_out = ep[i].desc.bEndpointAddress; 544 545 /* MosChip says that the chip has only two bulk 546 * endpoints. Find one for each direction and move on. 547 */ 548 if ((mcs->ep_in != 0) && (mcs->ep_out != 0)) { 549 ret = 1; 550 break; 551 } 552 } 553 554 return ret; 555} 556 557static void mcs_speed_work(struct work_struct *work) 558{ 559 struct mcs_cb *mcs = container_of(work, struct mcs_cb, work); 560 struct net_device *netdev = mcs->netdev; 561 562 mcs_speed_change(mcs); 563 netif_wake_queue(netdev); 564} 565 566/* Function to change the speed of the mcs7780. Fully supports SIR, 567 * MIR, and FIR speeds. 568 */ 569static int mcs_speed_change(struct mcs_cb *mcs) 570{ 571 int ret = 0; 572 int rst = 0; 573 int cnt = 0; 574 __u16 nspeed; 575 __u16 rval; 576 577 nspeed = mcs_speed_set[(mcs->new_speed >> 8) & 0x0f]; 578 579 do { 580 mcs_get_reg(mcs, MCS_RESV_REG, &rval); 581 } while(cnt++ < 100 && (rval & MCS_IRINTX)); 582 583 if (cnt > 100) { 584 IRDA_ERROR("unable to change speed\n"); 585 ret = -EIO; 586 goto error; 587 } 588 589 mcs_get_reg(mcs, MCS_MODE_REG, &rval); 590 591 /* MINRXPW values recomended by MosChip */ 592 if (mcs->new_speed <= 115200) { 593 rval &= ~MCS_FIR; 594 595 if ((rst = (mcs->speed > 115200))) 596 mcs_set_reg(mcs, MCS_MINRXPW_REG, 0); 597 598 } else if (mcs->new_speed <= 1152000) { 599 rval &= ~MCS_FIR; 600 601 if ((rst = !(mcs->speed == 576000 || mcs->speed == 1152000))) 602 mcs_set_reg(mcs, MCS_MINRXPW_REG, 5); 603 604 } else { 605 rval |= MCS_FIR; 606 607 if ((rst = (mcs->speed != 4000000))) 608 mcs_set_reg(mcs, MCS_MINRXPW_REG, 5); 609 610 } 611 612 rval &= ~MCS_SPEED_MASK; 613 rval |= nspeed; 614 615 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval); 616 if (unlikely(ret)) 617 goto error; 618 619 if (rst) 620 switch (mcs->transceiver_type) { 621 case MCS_TSC_VISHAY: 622 ret = mcs_setup_transceiver_vishay(mcs); 623 break; 624 625 case MCS_TSC_SHARP: 626 ret = mcs_setup_transceiver_sharp(mcs); 627 break; 628 629 case MCS_TSC_AGILENT: 630 ret = mcs_setup_transceiver_agilent(mcs); 631 break; 632 633 default: 634 ret = 1; 635 IRDA_WARNING("Unknown transceiver type: %d\n", 636 mcs->transceiver_type); 637 } 638 if (unlikely(ret)) 639 goto error; 640 641 mcs_get_reg(mcs, MCS_MODE_REG, &rval); 642 rval &= ~MCS_RESET; 643 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval); 644 645 mcs->speed = mcs->new_speed; 646 error: 647 mcs->new_speed = 0; 648 return ret; 649} 650 651/* Ioctl calls not supported at this time. Can be an area of future work. */ 652static int mcs_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) 653{ 654 /* struct if_irda_req *irq = (struct if_irda_req *)rq; */ 655 /* struct mcs_cb *mcs = netdev_priv(netdev); */ 656 int ret = 0; 657 658 switch (cmd) { 659 default: 660 ret = -EOPNOTSUPP; 661 } 662 663 return ret; 664} 665 666/* Network device is taken down, done by "ifconfig irda0 down" */ 667static int mcs_net_close(struct net_device *netdev) 668{ 669 int ret = 0; 670 struct mcs_cb *mcs = netdev_priv(netdev); 671 672 /* Stop transmit processing */ 673 netif_stop_queue(netdev); 674 675 kfree_skb(mcs->rx_buff.skb); 676 677 /* kill and free the receive and transmit URBs */ 678 usb_kill_urb(mcs->rx_urb); 679 usb_free_urb(mcs->rx_urb); 680 usb_kill_urb(mcs->tx_urb); 681 usb_free_urb(mcs->tx_urb); 682 683 /* Stop and remove instance of IrLAP */ 684 if (mcs->irlap) 685 irlap_close(mcs->irlap); 686 687 mcs->irlap = NULL; 688 return ret; 689} 690 691/* Network device is taken up, done by "ifconfig irda0 up" */ 692static int mcs_net_open(struct net_device *netdev) 693{ 694 struct mcs_cb *mcs = netdev_priv(netdev); 695 char hwname[16]; 696 int ret = 0; 697 698 ret = usb_clear_halt(mcs->usbdev, 699 usb_sndbulkpipe(mcs->usbdev, mcs->ep_in)); 700 if (ret) 701 goto error1; 702 ret = usb_clear_halt(mcs->usbdev, 703 usb_rcvbulkpipe(mcs->usbdev, mcs->ep_out)); 704 if (ret) 705 goto error1; 706 707 ret = mcs_setup_transceiver(mcs); 708 if (ret) 709 goto error1; 710 711 ret = -ENOMEM; 712 713 /* Initialize for SIR/FIR to copy data directly into skb. */ 714 mcs->receiving = 0; 715 mcs->rx_buff.truesize = IRDA_SKB_MAX_MTU; 716 mcs->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU); 717 if (!mcs->rx_buff.skb) 718 goto error1; 719 720 skb_reserve(mcs->rx_buff.skb, 1); 721 mcs->rx_buff.head = mcs->rx_buff.skb->data; 722 do_gettimeofday(&mcs->rx_time); 723 724 /* 725 * Now that everything should be initialized properly, 726 * Open new IrLAP layer instance to take care of us... 727 * Note : will send immediately a speed change... 728 */ 729 sprintf(hwname, "usb#%d", mcs->usbdev->devnum); 730 mcs->irlap = irlap_open(netdev, &mcs->qos, hwname); 731 if (!mcs->irlap) { 732 IRDA_ERROR("mcs7780: irlap_open failed\n"); 733 goto error2; 734 } 735 736 if (!mcs_setup_urbs(mcs)) 737 goto error3; 738 739 ret = mcs_receive_start(mcs); 740 if (ret) 741 goto error3; 742 743 netif_start_queue(netdev); 744 return 0; 745 746 error3: 747 irlap_close(mcs->irlap); 748 error2: 749 kfree_skb(mcs->rx_buff.skb); 750 error1: 751 return ret; 752} 753 754/* Receive callback function. */ 755static void mcs_receive_irq(struct urb *urb) 756{ 757 __u8 *bytes; 758 struct mcs_cb *mcs = urb->context; 759 int i; 760 int ret; 761 762 if (!netif_running(mcs->netdev)) 763 return; 764 765 if (urb->status) 766 return; 767 768 if (urb->actual_length > 0) { 769 bytes = urb->transfer_buffer; 770 771 /* MCS returns frames without BOF and EOF 772 * I assume it returns whole frames. 773 */ 774 /* SIR speed */ 775 if(mcs->speed < 576000) { 776 async_unwrap_char(mcs->netdev, &mcs->netdev->stats, 777 &mcs->rx_buff, 0xc0); 778 779 for (i = 0; i < urb->actual_length; i++) 780 async_unwrap_char(mcs->netdev, &mcs->netdev->stats, 781 &mcs->rx_buff, bytes[i]); 782 783 async_unwrap_char(mcs->netdev, &mcs->netdev->stats, 784 &mcs->rx_buff, 0xc1); 785 } 786 /* MIR speed */ 787 else if(mcs->speed == 576000 || mcs->speed == 1152000) { 788 mcs_unwrap_mir(mcs, urb->transfer_buffer, 789 urb->actual_length); 790 } 791 /* FIR speed */ 792 else { 793 mcs_unwrap_fir(mcs, urb->transfer_buffer, 794 urb->actual_length); 795 } 796 do_gettimeofday(&mcs->rx_time); 797 } 798 799 ret = usb_submit_urb(urb, GFP_ATOMIC); 800} 801 802/* Transmit callback funtion. */ 803static void mcs_send_irq(struct urb *urb) 804{ 805 struct mcs_cb *mcs = urb->context; 806 struct net_device *ndev = mcs->netdev; 807 808 if (unlikely(mcs->new_speed)) 809 schedule_work(&mcs->work); 810 else 811 netif_wake_queue(ndev); 812} 813 814/* Transmit callback funtion. */ 815static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb, 816 struct net_device *ndev) 817{ 818 unsigned long flags; 819 struct mcs_cb *mcs; 820 int wraplen; 821 int ret = 0; 822 823 netif_stop_queue(ndev); 824 mcs = netdev_priv(ndev); 825 826 spin_lock_irqsave(&mcs->lock, flags); 827 828 mcs->new_speed = irda_get_next_speed(skb); 829 if (likely(mcs->new_speed == mcs->speed)) 830 mcs->new_speed = 0; 831 832 /* SIR speed */ 833 if(mcs->speed < 576000) { 834 wraplen = mcs_wrap_sir_skb(skb, mcs->out_buf); 835 } 836 /* MIR speed */ 837 else if(mcs->speed == 576000 || mcs->speed == 1152000) { 838 wraplen = mcs_wrap_mir_skb(skb, mcs->out_buf); 839 } 840 /* FIR speed */ 841 else { 842 wraplen = mcs_wrap_fir_skb(skb, mcs->out_buf); 843 } 844 usb_fill_bulk_urb(mcs->tx_urb, mcs->usbdev, 845 usb_sndbulkpipe(mcs->usbdev, mcs->ep_out), 846 mcs->out_buf, wraplen, mcs_send_irq, mcs); 847 848 if ((ret = usb_submit_urb(mcs->tx_urb, GFP_ATOMIC))) { 849 IRDA_ERROR("failed tx_urb: %d\n", ret); 850 switch (ret) { 851 case -ENODEV: 852 case -EPIPE: 853 break; 854 default: 855 mcs->netdev->stats.tx_errors++; 856 netif_start_queue(ndev); 857 } 858 } else { 859 mcs->netdev->stats.tx_packets++; 860 mcs->netdev->stats.tx_bytes += skb->len; 861 } 862 863 dev_kfree_skb(skb); 864 spin_unlock_irqrestore(&mcs->lock, flags); 865 return NETDEV_TX_OK; 866} 867 868static const struct net_device_ops mcs_netdev_ops = { 869 .ndo_open = mcs_net_open, 870 .ndo_stop = mcs_net_close, 871 .ndo_start_xmit = mcs_hard_xmit, 872 .ndo_do_ioctl = mcs_net_ioctl, 873}; 874 875/* 876 * This function is called by the USB subsystem for each new device in the 877 * system. Need to verify the device and if it is, then start handling it. 878 */ 879static int mcs_probe(struct usb_interface *intf, 880 const struct usb_device_id *id) 881{ 882 struct usb_device *udev = interface_to_usbdev(intf); 883 struct net_device *ndev = NULL; 884 struct mcs_cb *mcs; 885 int ret = -ENOMEM; 886 887 ndev = alloc_irdadev(sizeof(*mcs)); 888 if (!ndev) 889 goto error1; 890 891 IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum); 892 893 SET_NETDEV_DEV(ndev, &intf->dev); 894 895 ret = usb_reset_configuration(udev); 896 if (ret != 0) { 897 IRDA_ERROR("mcs7780: usb reset configuration failed\n"); 898 goto error2; 899 } 900 901 mcs = netdev_priv(ndev); 902 mcs->usbdev = udev; 903 mcs->netdev = ndev; 904 spin_lock_init(&mcs->lock); 905 906 /* Initialize QoS for this device */ 907 irda_init_max_qos_capabilies(&mcs->qos); 908 909 /* That's the Rx capability. */ 910 mcs->qos.baud_rate.bits &= 911 IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200 912 | IR_576000 | IR_1152000 | (IR_4000000 << 8); 913 914 915 mcs->qos.min_turn_time.bits &= qos_mtt_bits; 916 irda_qos_bits_to_value(&mcs->qos); 917 918 /* Speed change work initialisation*/ 919 INIT_WORK(&mcs->work, mcs_speed_work); 920 921 ndev->netdev_ops = &mcs_netdev_ops; 922 923 if (!intf->cur_altsetting) 924 goto error2; 925 926 ret = mcs_find_endpoints(mcs, intf->cur_altsetting->endpoint, 927 intf->cur_altsetting->desc.bNumEndpoints); 928 if (!ret) { 929 ret = -ENODEV; 930 goto error2; 931 } 932 933 ret = register_netdev(ndev); 934 if (ret != 0) 935 goto error2; 936 937 IRDA_DEBUG(1, "IrDA: Registered MosChip MCS7780 device as %s\n", 938 ndev->name); 939 940 mcs->transceiver_type = transceiver_type; 941 mcs->sir_tweak = sir_tweak; 942 mcs->receive_mode = receive_mode; 943 944 usb_set_intfdata(intf, mcs); 945 return 0; 946 947 error2: 948 free_netdev(ndev); 949 950 error1: 951 return ret; 952} 953 954/* The current device is removed, the USB layer tells us to shut down. */ 955static void mcs_disconnect(struct usb_interface *intf) 956{ 957 struct mcs_cb *mcs = usb_get_intfdata(intf); 958 959 if (!mcs) 960 return; 961 962 flush_scheduled_work(); 963 964 unregister_netdev(mcs->netdev); 965 free_netdev(mcs->netdev); 966 967 usb_set_intfdata(intf, NULL); 968 IRDA_DEBUG(0, "MCS7780 now disconnected.\n"); 969} 970 971/* Module insertion */ 972static int __init mcs_init(void) 973{ 974 int result; 975 976 /* register this driver with the USB subsystem */ 977 result = usb_register(&mcs_driver); 978 if (result) 979 IRDA_ERROR("usb_register failed. Error number %d\n", result); 980 981 return result; 982} 983module_init(mcs_init); 984 985/* Module removal */ 986static void __exit mcs_exit(void) 987{ 988 /* deregister this driver with the USB subsystem */ 989 usb_deregister(&mcs_driver); 990} 991module_exit(mcs_exit); 992