1/* 2 * Driver for Quantek QT1010 silicon tuner 3 * 4 * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> 5 * Aapo Tahkola <aet@rasterburn.org> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 20 */ 21#include "qt1010.h" 22#include "qt1010_priv.h" 23 24static int debug; 25module_param(debug, int, 0644); 26MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); 27 28#define dprintk(args...) \ 29 do { \ 30 if (debug) printk(KERN_DEBUG "QT1010: " args); \ 31 } while (0) 32 33/* read single register */ 34static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val) 35{ 36 struct i2c_msg msg[2] = { 37 { .addr = priv->cfg->i2c_address, 38 .flags = 0, .buf = ®, .len = 1 }, 39 { .addr = priv->cfg->i2c_address, 40 .flags = I2C_M_RD, .buf = val, .len = 1 }, 41 }; 42 43 if (i2c_transfer(priv->i2c, msg, 2) != 2) { 44 printk(KERN_WARNING "qt1010 I2C read failed\n"); 45 return -EREMOTEIO; 46 } 47 return 0; 48} 49 50/* write single register */ 51static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val) 52{ 53 u8 buf[2] = { reg, val }; 54 struct i2c_msg msg = { .addr = priv->cfg->i2c_address, 55 .flags = 0, .buf = buf, .len = 2 }; 56 57 if (i2c_transfer(priv->i2c, &msg, 1) != 1) { 58 printk(KERN_WARNING "qt1010 I2C write failed\n"); 59 return -EREMOTEIO; 60 } 61 return 0; 62} 63 64/* dump all registers */ 65static void qt1010_dump_regs(struct qt1010_priv *priv) 66{ 67 u8 reg, val; 68 69 for (reg = 0; ; reg++) { 70 if (reg % 16 == 0) { 71 if (reg) 72 printk(KERN_CONT "\n"); 73 printk(KERN_DEBUG "%02x:", reg); 74 } 75 if (qt1010_readreg(priv, reg, &val) == 0) 76 printk(KERN_CONT " %02x", val); 77 else 78 printk(KERN_CONT " --"); 79 if (reg == 0x2f) 80 break; 81 } 82 printk(KERN_CONT "\n"); 83} 84 85static int qt1010_set_params(struct dvb_frontend *fe, 86 struct dvb_frontend_parameters *params) 87{ 88 struct qt1010_priv *priv; 89 int err; 90 u32 freq, div, mod1, mod2; 91 u8 i, tmpval, reg05; 92 qt1010_i2c_oper_t rd[48] = { 93 { QT1010_WR, 0x01, 0x80 }, 94 { QT1010_WR, 0x02, 0x3f }, 95 { QT1010_WR, 0x05, 0xff }, /* 02 c write */ 96 { QT1010_WR, 0x06, 0x44 }, 97 { QT1010_WR, 0x07, 0xff }, /* 04 c write */ 98 { QT1010_WR, 0x08, 0x08 }, 99 { QT1010_WR, 0x09, 0xff }, /* 06 c write */ 100 { QT1010_WR, 0x0a, 0xff }, /* 07 c write */ 101 { QT1010_WR, 0x0b, 0xff }, /* 08 c write */ 102 { QT1010_WR, 0x0c, 0xe1 }, 103 { QT1010_WR, 0x1a, 0xff }, /* 10 c write */ 104 { QT1010_WR, 0x1b, 0x00 }, 105 { QT1010_WR, 0x1c, 0x89 }, 106 { QT1010_WR, 0x11, 0xff }, /* 13 c write */ 107 { QT1010_WR, 0x12, 0xff }, /* 14 c write */ 108 { QT1010_WR, 0x22, 0xff }, /* 15 c write */ 109 { QT1010_WR, 0x1e, 0x00 }, 110 { QT1010_WR, 0x1e, 0xd0 }, 111 { QT1010_RD, 0x22, 0xff }, /* 16 c read */ 112 { QT1010_WR, 0x1e, 0x00 }, 113 { QT1010_RD, 0x05, 0xff }, /* 20 c read */ 114 { QT1010_RD, 0x22, 0xff }, /* 21 c read */ 115 { QT1010_WR, 0x23, 0xd0 }, 116 { QT1010_WR, 0x1e, 0x00 }, 117 { QT1010_WR, 0x1e, 0xe0 }, 118 { QT1010_RD, 0x23, 0xff }, /* 25 c read */ 119 { QT1010_RD, 0x23, 0xff }, /* 26 c read */ 120 { QT1010_WR, 0x1e, 0x00 }, 121 { QT1010_WR, 0x24, 0xd0 }, 122 { QT1010_WR, 0x1e, 0x00 }, 123 { QT1010_WR, 0x1e, 0xf0 }, 124 { QT1010_RD, 0x24, 0xff }, /* 31 c read */ 125 { QT1010_WR, 0x1e, 0x00 }, 126 { QT1010_WR, 0x14, 0x7f }, 127 { QT1010_WR, 0x15, 0x7f }, 128 { QT1010_WR, 0x05, 0xff }, /* 35 c write */ 129 { QT1010_WR, 0x06, 0x00 }, 130 { QT1010_WR, 0x15, 0x1f }, 131 { QT1010_WR, 0x16, 0xff }, 132 { QT1010_WR, 0x18, 0xff }, 133 { QT1010_WR, 0x1f, 0xff }, /* 40 c write */ 134 { QT1010_WR, 0x20, 0xff }, /* 41 c write */ 135 { QT1010_WR, 0x21, 0x53 }, 136 { QT1010_WR, 0x25, 0xff }, /* 43 c write */ 137 { QT1010_WR, 0x26, 0x15 }, 138 { QT1010_WR, 0x00, 0xff }, /* 45 c write */ 139 { QT1010_WR, 0x02, 0x00 }, 140 { QT1010_WR, 0x01, 0x00 } 141 }; 142 143#define FREQ1 32000000 /* 32 MHz */ 144#define FREQ2 4000000 /* 4 MHz Quartz oscillator in the stick? */ 145 146 priv = fe->tuner_priv; 147 freq = params->frequency; 148 div = (freq + QT1010_OFFSET) / QT1010_STEP; 149 freq = (div * QT1010_STEP) - QT1010_OFFSET; 150 mod1 = (freq + QT1010_OFFSET) % FREQ1; 151 mod2 = (freq + QT1010_OFFSET) % FREQ2; 152 priv->bandwidth = 153 (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0; 154 priv->frequency = freq; 155 156 if (fe->ops.i2c_gate_ctrl) 157 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ 158 159 /* reg 05 base value */ 160 if (freq < 290000000) reg05 = 0x14; /* 290 MHz */ 161 else if (freq < 610000000) reg05 = 0x34; /* 610 MHz */ 162 else if (freq < 802000000) reg05 = 0x54; /* 802 MHz */ 163 else reg05 = 0x74; 164 165 /* 0x5 */ 166 rd[2].val = reg05; 167 168 /* 07 - set frequency: 32 MHz scale */ 169 rd[4].val = (freq + QT1010_OFFSET) / FREQ1; 170 171 /* 09 - changes every 8/24 MHz */ 172 if (mod1 < 8000000) rd[6].val = 0x1d; 173 else rd[6].val = 0x1c; 174 175 /* 0a - set frequency: 4 MHz scale (max 28 MHz) */ 176 if (mod1 < 1*FREQ2) rd[7].val = 0x09; /* +0 MHz */ 177 else if (mod1 < 2*FREQ2) rd[7].val = 0x08; /* +4 MHz */ 178 else if (mod1 < 3*FREQ2) rd[7].val = 0x0f; /* +8 MHz */ 179 else if (mod1 < 4*FREQ2) rd[7].val = 0x0e; /* +12 MHz */ 180 else if (mod1 < 5*FREQ2) rd[7].val = 0x0d; /* +16 MHz */ 181 else if (mod1 < 6*FREQ2) rd[7].val = 0x0c; /* +20 MHz */ 182 else if (mod1 < 7*FREQ2) rd[7].val = 0x0b; /* +24 MHz */ 183 else rd[7].val = 0x0a; /* +28 MHz */ 184 185 /* 0b - changes every 2/2 MHz */ 186 if (mod2 < 2000000) rd[8].val = 0x45; 187 else rd[8].val = 0x44; 188 189 /* 1a - set frequency: 125 kHz scale (max 3875 kHz)*/ 190 tmpval = 0x78; /* byte, overflows intentionally */ 191 rd[10].val = tmpval-((mod2/QT1010_STEP)*0x08); 192 193 /* 11 */ 194 rd[13].val = 0xfd; /* TODO: correct value calculation */ 195 196 /* 12 */ 197 rd[14].val = 0x91; /* TODO: correct value calculation */ 198 199 /* 22 */ 200 if (freq < 450000000) rd[15].val = 0xd0; /* 450 MHz */ 201 else if (freq < 482000000) rd[15].val = 0xd1; /* 482 MHz */ 202 else if (freq < 514000000) rd[15].val = 0xd4; /* 514 MHz */ 203 else if (freq < 546000000) rd[15].val = 0xd7; /* 546 MHz */ 204 else if (freq < 610000000) rd[15].val = 0xda; /* 610 MHz */ 205 else rd[15].val = 0xd0; 206 207 /* 05 */ 208 rd[35].val = (reg05 & 0xf0); 209 210 /* 1f */ 211 if (mod1 < 8000000) tmpval = 0x00; 212 else if (mod1 < 12000000) tmpval = 0x01; 213 else if (mod1 < 16000000) tmpval = 0x02; 214 else if (mod1 < 24000000) tmpval = 0x03; 215 else if (mod1 < 28000000) tmpval = 0x04; 216 else tmpval = 0x05; 217 rd[40].val = (priv->reg1f_init_val + 0x0e + tmpval); 218 219 /* 20 */ 220 if (mod1 < 8000000) tmpval = 0x00; 221 else if (mod1 < 12000000) tmpval = 0x01; 222 else if (mod1 < 20000000) tmpval = 0x02; 223 else if (mod1 < 24000000) tmpval = 0x03; 224 else if (mod1 < 28000000) tmpval = 0x04; 225 else tmpval = 0x05; 226 rd[41].val = (priv->reg20_init_val + 0x0d + tmpval); 227 228 /* 25 */ 229 rd[43].val = priv->reg25_init_val; 230 231 /* 00 */ 232 rd[45].val = 0x92; /* TODO: correct value calculation */ 233 234 dprintk("freq:%u 05:%02x 07:%02x 09:%02x 0a:%02x 0b:%02x " \ 235 "1a:%02x 11:%02x 12:%02x 22:%02x 05:%02x 1f:%02x " \ 236 "20:%02x 25:%02x 00:%02x", \ 237 freq, rd[2].val, rd[4].val, rd[6].val, rd[7].val, rd[8].val, \ 238 rd[10].val, rd[13].val, rd[14].val, rd[15].val, rd[35].val, \ 239 rd[40].val, rd[41].val, rd[43].val, rd[45].val); 240 241 for (i = 0; i < ARRAY_SIZE(rd); i++) { 242 if (rd[i].oper == QT1010_WR) { 243 err = qt1010_writereg(priv, rd[i].reg, rd[i].val); 244 } else { /* read is required to proper locking */ 245 err = qt1010_readreg(priv, rd[i].reg, &tmpval); 246 } 247 if (err) return err; 248 } 249 250 if (debug) 251 qt1010_dump_regs(priv); 252 253 if (fe->ops.i2c_gate_ctrl) 254 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ 255 256 return 0; 257} 258 259static int qt1010_init_meas1(struct qt1010_priv *priv, 260 u8 oper, u8 reg, u8 reg_init_val, u8 *retval) 261{ 262 u8 i, val1, val2; 263 int err; 264 265 qt1010_i2c_oper_t i2c_data[] = { 266 { QT1010_WR, reg, reg_init_val }, 267 { QT1010_WR, 0x1e, 0x00 }, 268 { QT1010_WR, 0x1e, oper }, 269 { QT1010_RD, reg, 0xff } 270 }; 271 272 for (i = 0; i < ARRAY_SIZE(i2c_data); i++) { 273 if (i2c_data[i].oper == QT1010_WR) { 274 err = qt1010_writereg(priv, i2c_data[i].reg, 275 i2c_data[i].val); 276 } else { 277 err = qt1010_readreg(priv, i2c_data[i].reg, &val2); 278 } 279 if (err) return err; 280 } 281 282 do { 283 val1 = val2; 284 err = qt1010_readreg(priv, reg, &val2); 285 if (err) return err; 286 dprintk("compare reg:%02x %02x %02x", reg, val1, val2); 287 } while (val1 != val2); 288 *retval = val1; 289 290 return qt1010_writereg(priv, 0x1e, 0x00); 291} 292 293static u8 qt1010_init_meas2(struct qt1010_priv *priv, 294 u8 reg_init_val, u8 *retval) 295{ 296 u8 i, val; 297 int err; 298 qt1010_i2c_oper_t i2c_data[] = { 299 { QT1010_WR, 0x07, reg_init_val }, 300 { QT1010_WR, 0x22, 0xd0 }, 301 { QT1010_WR, 0x1e, 0x00 }, 302 { QT1010_WR, 0x1e, 0xd0 }, 303 { QT1010_RD, 0x22, 0xff }, 304 { QT1010_WR, 0x1e, 0x00 }, 305 { QT1010_WR, 0x22, 0xff } 306 }; 307 for (i = 0; i < ARRAY_SIZE(i2c_data); i++) { 308 if (i2c_data[i].oper == QT1010_WR) { 309 err = qt1010_writereg(priv, i2c_data[i].reg, 310 i2c_data[i].val); 311 } else { 312 err = qt1010_readreg(priv, i2c_data[i].reg, &val); 313 } 314 if (err) return err; 315 } 316 *retval = val; 317 return 0; 318} 319 320static int qt1010_init(struct dvb_frontend *fe) 321{ 322 struct qt1010_priv *priv = fe->tuner_priv; 323 struct dvb_frontend_parameters params; 324 int err = 0; 325 u8 i, tmpval, *valptr = NULL; 326 327 qt1010_i2c_oper_t i2c_data[] = { 328 { QT1010_WR, 0x01, 0x80 }, 329 { QT1010_WR, 0x0d, 0x84 }, 330 { QT1010_WR, 0x0e, 0xb7 }, 331 { QT1010_WR, 0x2a, 0x23 }, 332 { QT1010_WR, 0x2c, 0xdc }, 333 { QT1010_M1, 0x25, 0x40 }, /* get reg 25 init value */ 334 { QT1010_M1, 0x81, 0xff }, /* get reg 25 init value */ 335 { QT1010_WR, 0x2b, 0x70 }, 336 { QT1010_WR, 0x2a, 0x23 }, 337 { QT1010_M1, 0x26, 0x08 }, 338 { QT1010_M1, 0x82, 0xff }, 339 { QT1010_WR, 0x05, 0x14 }, 340 { QT1010_WR, 0x06, 0x44 }, 341 { QT1010_WR, 0x07, 0x28 }, 342 { QT1010_WR, 0x08, 0x0b }, 343 { QT1010_WR, 0x11, 0xfd }, 344 { QT1010_M1, 0x22, 0x0d }, 345 { QT1010_M1, 0xd0, 0xff }, 346 { QT1010_WR, 0x06, 0x40 }, 347 { QT1010_WR, 0x16, 0xf0 }, 348 { QT1010_WR, 0x02, 0x38 }, 349 { QT1010_WR, 0x03, 0x18 }, 350 { QT1010_WR, 0x20, 0xe0 }, 351 { QT1010_M1, 0x1f, 0x20 }, /* get reg 1f init value */ 352 { QT1010_M1, 0x84, 0xff }, /* get reg 1f init value */ 353 { QT1010_RD, 0x20, 0x20 }, /* get reg 20 init value */ 354 { QT1010_WR, 0x03, 0x19 }, 355 { QT1010_WR, 0x02, 0x3f }, 356 { QT1010_WR, 0x21, 0x53 }, 357 { QT1010_RD, 0x21, 0xff }, 358 { QT1010_WR, 0x11, 0xfd }, 359 { QT1010_WR, 0x05, 0x34 }, 360 { QT1010_WR, 0x06, 0x44 }, 361 { QT1010_WR, 0x08, 0x08 } 362 }; 363 364 if (fe->ops.i2c_gate_ctrl) 365 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ 366 367 for (i = 0; i < ARRAY_SIZE(i2c_data); i++) { 368 switch (i2c_data[i].oper) { 369 case QT1010_WR: 370 err = qt1010_writereg(priv, i2c_data[i].reg, 371 i2c_data[i].val); 372 break; 373 case QT1010_RD: 374 if (i2c_data[i].val == 0x20) 375 valptr = &priv->reg20_init_val; 376 else 377 valptr = &tmpval; 378 err = qt1010_readreg(priv, i2c_data[i].reg, valptr); 379 break; 380 case QT1010_M1: 381 if (i2c_data[i].val == 0x25) 382 valptr = &priv->reg25_init_val; 383 else if (i2c_data[i].val == 0x1f) 384 valptr = &priv->reg1f_init_val; 385 else 386 valptr = &tmpval; 387 err = qt1010_init_meas1(priv, i2c_data[i+1].reg, 388 i2c_data[i].reg, 389 i2c_data[i].val, valptr); 390 i++; 391 break; 392 } 393 if (err) return err; 394 } 395 396 for (i = 0x31; i < 0x3a; i++) /* 0x31 - 0x39 */ 397 if ((err = qt1010_init_meas2(priv, i, &tmpval))) 398 return err; 399 400 params.frequency = 545000000; /* Sigmatek DVB-110 545000000 */ 401 /* MSI Megasky 580 GL861 533000000 */ 402 return qt1010_set_params(fe, ¶ms); 403} 404 405static int qt1010_release(struct dvb_frontend *fe) 406{ 407 kfree(fe->tuner_priv); 408 fe->tuner_priv = NULL; 409 return 0; 410} 411 412static int qt1010_get_frequency(struct dvb_frontend *fe, u32 *frequency) 413{ 414 struct qt1010_priv *priv = fe->tuner_priv; 415 *frequency = priv->frequency; 416 return 0; 417} 418 419static int qt1010_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) 420{ 421 struct qt1010_priv *priv = fe->tuner_priv; 422 *bandwidth = priv->bandwidth; 423 return 0; 424} 425 426static const struct dvb_tuner_ops qt1010_tuner_ops = { 427 .info = { 428 .name = "Quantek QT1010", 429 .frequency_min = QT1010_MIN_FREQ, 430 .frequency_max = QT1010_MAX_FREQ, 431 .frequency_step = QT1010_STEP, 432 }, 433 434 .release = qt1010_release, 435 .init = qt1010_init, 436 /* TODO: implement sleep */ 437 438 .set_params = qt1010_set_params, 439 .get_frequency = qt1010_get_frequency, 440 .get_bandwidth = qt1010_get_bandwidth 441}; 442 443struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe, 444 struct i2c_adapter *i2c, 445 struct qt1010_config *cfg) 446{ 447 struct qt1010_priv *priv = NULL; 448 u8 id; 449 450 priv = kzalloc(sizeof(struct qt1010_priv), GFP_KERNEL); 451 if (priv == NULL) 452 return NULL; 453 454 priv->cfg = cfg; 455 priv->i2c = i2c; 456 457 if (fe->ops.i2c_gate_ctrl) 458 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ 459 460 461 /* Try to detect tuner chip. Probably this is not correct register. */ 462 if (qt1010_readreg(priv, 0x29, &id) != 0 || (id != 0x39)) { 463 kfree(priv); 464 return NULL; 465 } 466 467 if (fe->ops.i2c_gate_ctrl) 468 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ 469 470 printk(KERN_INFO "Quantek QT1010 successfully identified.\n"); 471 memcpy(&fe->ops.tuner_ops, &qt1010_tuner_ops, 472 sizeof(struct dvb_tuner_ops)); 473 474 fe->tuner_priv = priv; 475 return fe; 476} 477EXPORT_SYMBOL(qt1010_attach); 478 479MODULE_DESCRIPTION("Quantek QT1010 silicon tuner driver"); 480MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); 481MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>"); 482MODULE_VERSION("0.1"); 483MODULE_LICENSE("GPL"); 484