• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/leds/
1#include <linux/kernel.h>
2#include <linux/platform_device.h>
3#include <linux/leds.h>
4#include <linux/io.h>
5#include <linux/atmel_pwm.h>
6#include <linux/slab.h>
7
8
9struct pwmled {
10	struct led_classdev	cdev;
11	struct pwm_channel	pwmc;
12	struct gpio_led		*desc;
13	u32			mult;
14	u8			active_low;
15};
16
17
18/*
19 * For simplicity, we use "brightness" as if it were a linear function
20 * of PWM duty cycle.  However, a logarithmic function of duty cycle is
21 * probably a better match for perceived brightness: two is half as bright
22 * as four, four is half as bright as eight, etc
23 */
24static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
25{
26	struct pwmled		 *led;
27
28	/* update the duty cycle for the *next* period */
29	led = container_of(cdev, struct pwmled, cdev);
30	pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
31}
32
33/*
34 * NOTE:  we reuse the platform_data structure of GPIO leds,
35 * but repurpose its "gpio" number as a PWM channel number.
36 */
37static int __init pwmled_probe(struct platform_device *pdev)
38{
39	const struct gpio_led_platform_data	*pdata;
40	struct pwmled				*leds;
41	int					i;
42	int					status;
43
44	pdata = pdev->dev.platform_data;
45	if (!pdata || pdata->num_leds < 1)
46		return -ENODEV;
47
48	leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
49	if (!leds)
50		return -ENOMEM;
51
52	for (i = 0; i < pdata->num_leds; i++) {
53		struct pwmled		*led = leds + i;
54		const struct gpio_led	*dat = pdata->leds + i;
55		u32			tmp;
56
57		led->cdev.name = dat->name;
58		led->cdev.brightness = LED_OFF;
59		led->cdev.brightness_set = pwmled_brightness;
60		led->cdev.default_trigger = dat->default_trigger;
61
62		led->active_low = dat->active_low;
63
64		status = pwm_channel_alloc(dat->gpio, &led->pwmc);
65		if (status < 0)
66			goto err;
67
68		/*
69		 * Prescale clock by 2^x, so PWM counts in low MHz.
70		 * Start each cycle with the LED active, so increasing
71		 * the duty cycle gives us more time on (== brighter).
72		 */
73		tmp = 5;
74		if (!led->active_low)
75			tmp |= PWM_CPR_CPOL;
76		pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
77
78		/*
79		 * Pick a period so PWM cycles at 100+ Hz; and a multiplier
80		 * for scaling duty cycle:  brightness * mult.
81		 */
82		tmp = (led->pwmc.mck / (1 << 5)) / 100;
83		tmp /= 255;
84		led->mult = tmp;
85		pwm_channel_writel(&led->pwmc, PWM_CDTY,
86				led->cdev.brightness * 255);
87		pwm_channel_writel(&led->pwmc, PWM_CPRD,
88				LED_FULL * tmp);
89
90		pwm_channel_enable(&led->pwmc);
91
92		/* Hand it over to the LED framework */
93		status = led_classdev_register(&pdev->dev, &led->cdev);
94		if (status < 0) {
95			pwm_channel_free(&led->pwmc);
96			goto err;
97		}
98	}
99
100	platform_set_drvdata(pdev, leds);
101	return 0;
102
103err:
104	if (i > 0) {
105		for (i = i - 1; i >= 0; i--) {
106			led_classdev_unregister(&leds[i].cdev);
107			pwm_channel_free(&leds[i].pwmc);
108		}
109	}
110	kfree(leds);
111
112	return status;
113}
114
115static int __exit pwmled_remove(struct platform_device *pdev)
116{
117	const struct gpio_led_platform_data	*pdata;
118	struct pwmled				*leds;
119	unsigned				i;
120
121	pdata = pdev->dev.platform_data;
122	leds = platform_get_drvdata(pdev);
123
124	for (i = 0; i < pdata->num_leds; i++) {
125		struct pwmled		*led = leds + i;
126
127		led_classdev_unregister(&led->cdev);
128		pwm_channel_free(&led->pwmc);
129	}
130
131	kfree(leds);
132	platform_set_drvdata(pdev, NULL);
133	return 0;
134}
135
136/* work with hotplug and coldplug */
137MODULE_ALIAS("platform:leds-atmel-pwm");
138
139static struct platform_driver pwmled_driver = {
140	.driver = {
141		.name =		"leds-atmel-pwm",
142		.owner =	THIS_MODULE,
143	},
144	/* REVISIT add suspend() and resume() methods */
145	.remove =	__exit_p(pwmled_remove),
146};
147
148static int __init modinit(void)
149{
150	return platform_driver_probe(&pwmled_driver, pwmled_probe);
151}
152module_init(modinit);
153
154static void __exit modexit(void)
155{
156	platform_driver_unregister(&pwmled_driver);
157}
158module_exit(modexit);
159
160MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
161MODULE_LICENSE("GPL");
162