1/* 2 * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved. 3 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34#include <linux/spinlock.h> 35#include <linux/pci.h> 36#include <linux/io.h> 37#include <linux/delay.h> 38#include <linux/netdevice.h> 39#include <linux/vmalloc.h> 40 41#include "qib.h" 42 43/* 44 * The size has to be longer than this string, so we can append 45 * board/chip information to it in the init code. 46 */ 47const char ib_qib_version[] = QIB_IDSTR "\n"; 48 49DEFINE_SPINLOCK(qib_devs_lock); 50LIST_HEAD(qib_dev_list); 51DEFINE_MUTEX(qib_mutex); /* general driver use */ 52 53unsigned qib_ibmtu; 54module_param_named(ibmtu, qib_ibmtu, uint, S_IRUGO); 55MODULE_PARM_DESC(ibmtu, "Set max IB MTU (0=2KB, 1=256, 2=512, ... 5=4096"); 56 57unsigned qib_compat_ddr_negotiate = 1; 58module_param_named(compat_ddr_negotiate, qib_compat_ddr_negotiate, uint, 59 S_IWUSR | S_IRUGO); 60MODULE_PARM_DESC(compat_ddr_negotiate, 61 "Attempt pre-IBTA 1.2 DDR speed negotiation"); 62 63MODULE_LICENSE("Dual BSD/GPL"); 64MODULE_AUTHOR("QLogic <support@qlogic.com>"); 65MODULE_DESCRIPTION("QLogic IB driver"); 66 67/* 68 * QIB_PIO_MAXIBHDR is the max IB header size allowed for in our 69 * PIO send buffers. This is well beyond anything currently 70 * defined in the InfiniBand spec. 71 */ 72#define QIB_PIO_MAXIBHDR 128 73 74struct qlogic_ib_stats qib_stats; 75 76const char *qib_get_unit_name(int unit) 77{ 78 static char iname[16]; 79 80 snprintf(iname, sizeof iname, "infinipath%u", unit); 81 return iname; 82} 83 84/* 85 * Return count of units with at least one port ACTIVE. 86 */ 87int qib_count_active_units(void) 88{ 89 struct qib_devdata *dd; 90 struct qib_pportdata *ppd; 91 unsigned long flags; 92 int pidx, nunits_active = 0; 93 94 spin_lock_irqsave(&qib_devs_lock, flags); 95 list_for_each_entry(dd, &qib_dev_list, list) { 96 if (!(dd->flags & QIB_PRESENT) || !dd->kregbase) 97 continue; 98 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 99 ppd = dd->pport + pidx; 100 if (ppd->lid && (ppd->lflags & (QIBL_LINKINIT | 101 QIBL_LINKARMED | QIBL_LINKACTIVE))) { 102 nunits_active++; 103 break; 104 } 105 } 106 } 107 spin_unlock_irqrestore(&qib_devs_lock, flags); 108 return nunits_active; 109} 110 111/* 112 * Return count of all units, optionally return in arguments 113 * the number of usable (present) units, and the number of 114 * ports that are up. 115 */ 116int qib_count_units(int *npresentp, int *nupp) 117{ 118 int nunits = 0, npresent = 0, nup = 0; 119 struct qib_devdata *dd; 120 unsigned long flags; 121 int pidx; 122 struct qib_pportdata *ppd; 123 124 spin_lock_irqsave(&qib_devs_lock, flags); 125 126 list_for_each_entry(dd, &qib_dev_list, list) { 127 nunits++; 128 if ((dd->flags & QIB_PRESENT) && dd->kregbase) 129 npresent++; 130 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 131 ppd = dd->pport + pidx; 132 if (ppd->lid && (ppd->lflags & (QIBL_LINKINIT | 133 QIBL_LINKARMED | QIBL_LINKACTIVE))) 134 nup++; 135 } 136 } 137 138 spin_unlock_irqrestore(&qib_devs_lock, flags); 139 140 if (npresentp) 141 *npresentp = npresent; 142 if (nupp) 143 *nupp = nup; 144 145 return nunits; 146} 147 148/** 149 * qib_wait_linkstate - wait for an IB link state change to occur 150 * @dd: the qlogic_ib device 151 * @state: the state to wait for 152 * @msecs: the number of milliseconds to wait 153 * 154 * wait up to msecs milliseconds for IB link state change to occur for 155 * now, take the easy polling route. Currently used only by 156 * qib_set_linkstate. Returns 0 if state reached, otherwise 157 * -ETIMEDOUT state can have multiple states set, for any of several 158 * transitions. 159 */ 160int qib_wait_linkstate(struct qib_pportdata *ppd, u32 state, int msecs) 161{ 162 int ret; 163 unsigned long flags; 164 165 spin_lock_irqsave(&ppd->lflags_lock, flags); 166 if (ppd->state_wanted) { 167 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 168 ret = -EBUSY; 169 goto bail; 170 } 171 ppd->state_wanted = state; 172 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 173 wait_event_interruptible_timeout(ppd->state_wait, 174 (ppd->lflags & state), 175 msecs_to_jiffies(msecs)); 176 spin_lock_irqsave(&ppd->lflags_lock, flags); 177 ppd->state_wanted = 0; 178 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 179 180 if (!(ppd->lflags & state)) 181 ret = -ETIMEDOUT; 182 else 183 ret = 0; 184bail: 185 return ret; 186} 187 188int qib_set_linkstate(struct qib_pportdata *ppd, u8 newstate) 189{ 190 u32 lstate; 191 int ret; 192 struct qib_devdata *dd = ppd->dd; 193 unsigned long flags; 194 195 switch (newstate) { 196 case QIB_IB_LINKDOWN_ONLY: 197 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 198 IB_LINKCMD_DOWN | IB_LINKINITCMD_NOP); 199 /* don't wait */ 200 ret = 0; 201 goto bail; 202 203 case QIB_IB_LINKDOWN: 204 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 205 IB_LINKCMD_DOWN | IB_LINKINITCMD_POLL); 206 /* don't wait */ 207 ret = 0; 208 goto bail; 209 210 case QIB_IB_LINKDOWN_SLEEP: 211 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 212 IB_LINKCMD_DOWN | IB_LINKINITCMD_SLEEP); 213 /* don't wait */ 214 ret = 0; 215 goto bail; 216 217 case QIB_IB_LINKDOWN_DISABLE: 218 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 219 IB_LINKCMD_DOWN | IB_LINKINITCMD_DISABLE); 220 /* don't wait */ 221 ret = 0; 222 goto bail; 223 224 case QIB_IB_LINKARM: 225 if (ppd->lflags & QIBL_LINKARMED) { 226 ret = 0; 227 goto bail; 228 } 229 if (!(ppd->lflags & (QIBL_LINKINIT | QIBL_LINKACTIVE))) { 230 ret = -EINVAL; 231 goto bail; 232 } 233 /* 234 * Since the port can be ACTIVE when we ask for ARMED, 235 * clear QIBL_LINKV so we can wait for a transition. 236 * If the link isn't ARMED, then something else happened 237 * and there is no point waiting for ARMED. 238 */ 239 spin_lock_irqsave(&ppd->lflags_lock, flags); 240 ppd->lflags &= ~QIBL_LINKV; 241 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 242 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 243 IB_LINKCMD_ARMED | IB_LINKINITCMD_NOP); 244 lstate = QIBL_LINKV; 245 break; 246 247 case QIB_IB_LINKACTIVE: 248 if (ppd->lflags & QIBL_LINKACTIVE) { 249 ret = 0; 250 goto bail; 251 } 252 if (!(ppd->lflags & QIBL_LINKARMED)) { 253 ret = -EINVAL; 254 goto bail; 255 } 256 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, 257 IB_LINKCMD_ACTIVE | IB_LINKINITCMD_NOP); 258 lstate = QIBL_LINKACTIVE; 259 break; 260 261 default: 262 ret = -EINVAL; 263 goto bail; 264 } 265 ret = qib_wait_linkstate(ppd, lstate, 10); 266 267bail: 268 return ret; 269} 270 271/* 272 * Get address of eager buffer from it's index (allocated in chunks, not 273 * contiguous). 274 */ 275static inline void *qib_get_egrbuf(const struct qib_ctxtdata *rcd, u32 etail) 276{ 277 const u32 chunk = etail / rcd->rcvegrbufs_perchunk; 278 const u32 idx = etail % rcd->rcvegrbufs_perchunk; 279 280 return rcd->rcvegrbuf[chunk] + idx * rcd->dd->rcvegrbufsize; 281} 282 283/* 284 * Returns 1 if error was a CRC, else 0. 285 * Needed for some chip's synthesized error counters. 286 */ 287static u32 qib_rcv_hdrerr(struct qib_pportdata *ppd, u32 ctxt, 288 u32 eflags, u32 l, u32 etail, __le32 *rhf_addr, 289 struct qib_message_header *hdr) 290{ 291 u32 ret = 0; 292 293 if (eflags & (QLOGIC_IB_RHF_H_ICRCERR | QLOGIC_IB_RHF_H_VCRCERR)) 294 ret = 1; 295 return ret; 296} 297 298/* 299 * qib_kreceive - receive a packet 300 * @rcd: the qlogic_ib context 301 * @llic: gets count of good packets needed to clear lli, 302 * (used with chips that need need to track crcs for lli) 303 * 304 * called from interrupt handler for errors or receive interrupt 305 * Returns number of CRC error packets, needed by some chips for 306 * local link integrity tracking. crcs are adjusted down by following 307 * good packets, if any, and count of good packets is also tracked. 308 */ 309u32 qib_kreceive(struct qib_ctxtdata *rcd, u32 *llic, u32 *npkts) 310{ 311 struct qib_devdata *dd = rcd->dd; 312 struct qib_pportdata *ppd = rcd->ppd; 313 __le32 *rhf_addr; 314 void *ebuf; 315 const u32 rsize = dd->rcvhdrentsize; /* words */ 316 const u32 maxcnt = dd->rcvhdrcnt * rsize; /* words */ 317 u32 etail = -1, l, hdrqtail; 318 struct qib_message_header *hdr; 319 u32 eflags, etype, tlen, i = 0, updegr = 0, crcs = 0; 320 int last; 321 u64 lval; 322 struct qib_qp *qp, *nqp; 323 324 l = rcd->head; 325 rhf_addr = (__le32 *) rcd->rcvhdrq + l + dd->rhf_offset; 326 if (dd->flags & QIB_NODMA_RTAIL) { 327 u32 seq = qib_hdrget_seq(rhf_addr); 328 if (seq != rcd->seq_cnt) 329 goto bail; 330 hdrqtail = 0; 331 } else { 332 hdrqtail = qib_get_rcvhdrtail(rcd); 333 if (l == hdrqtail) 334 goto bail; 335 smp_rmb(); /* prevent speculative reads of dma'ed hdrq */ 336 } 337 338 for (last = 0, i = 1; !last && i <= 64; i += !last) { 339 hdr = dd->f_get_msgheader(dd, rhf_addr); 340 eflags = qib_hdrget_err_flags(rhf_addr); 341 etype = qib_hdrget_rcv_type(rhf_addr); 342 /* total length */ 343 tlen = qib_hdrget_length_in_bytes(rhf_addr); 344 ebuf = NULL; 345 if ((dd->flags & QIB_NODMA_RTAIL) ? 346 qib_hdrget_use_egr_buf(rhf_addr) : 347 (etype != RCVHQ_RCV_TYPE_EXPECTED)) { 348 etail = qib_hdrget_index(rhf_addr); 349 updegr = 1; 350 if (tlen > sizeof(*hdr) || 351 etype >= RCVHQ_RCV_TYPE_NON_KD) 352 ebuf = qib_get_egrbuf(rcd, etail); 353 } 354 if (!eflags) { 355 u16 lrh_len = be16_to_cpu(hdr->lrh[2]) << 2; 356 357 if (lrh_len != tlen) { 358 qib_stats.sps_lenerrs++; 359 goto move_along; 360 } 361 } 362 if (etype == RCVHQ_RCV_TYPE_NON_KD && !eflags && 363 ebuf == NULL && 364 tlen > (dd->rcvhdrentsize - 2 + 1 - 365 qib_hdrget_offset(rhf_addr)) << 2) { 366 goto move_along; 367 } 368 369 /* 370 * Both tiderr and qibhdrerr are set for all plain IB 371 * packets; only qibhdrerr should be set. 372 */ 373 if (unlikely(eflags)) 374 crcs += qib_rcv_hdrerr(ppd, rcd->ctxt, eflags, l, 375 etail, rhf_addr, hdr); 376 else if (etype == RCVHQ_RCV_TYPE_NON_KD) { 377 qib_ib_rcv(rcd, hdr, ebuf, tlen); 378 if (crcs) 379 crcs--; 380 else if (llic && *llic) 381 --*llic; 382 } 383move_along: 384 l += rsize; 385 if (l >= maxcnt) 386 l = 0; 387 rhf_addr = (__le32 *) rcd->rcvhdrq + l + dd->rhf_offset; 388 if (dd->flags & QIB_NODMA_RTAIL) { 389 u32 seq = qib_hdrget_seq(rhf_addr); 390 391 if (++rcd->seq_cnt > 13) 392 rcd->seq_cnt = 1; 393 if (seq != rcd->seq_cnt) 394 last = 1; 395 } else if (l == hdrqtail) 396 last = 1; 397 /* 398 * Update head regs etc., every 16 packets, if not last pkt, 399 * to help prevent rcvhdrq overflows, when many packets 400 * are processed and queue is nearly full. 401 * Don't request an interrupt for intermediate updates. 402 */ 403 lval = l; 404 if (!last && !(i & 0xf)) { 405 dd->f_update_usrhead(rcd, lval, updegr, etail); 406 updegr = 0; 407 } 408 } 409 410 rcd->head = l; 411 rcd->pkt_count += i; 412 413 /* 414 * Iterate over all QPs waiting to respond. 415 * The list won't change since the IRQ is only run on one CPU. 416 */ 417 list_for_each_entry_safe(qp, nqp, &rcd->qp_wait_list, rspwait) { 418 list_del_init(&qp->rspwait); 419 if (qp->r_flags & QIB_R_RSP_NAK) { 420 qp->r_flags &= ~QIB_R_RSP_NAK; 421 qib_send_rc_ack(qp); 422 } 423 if (qp->r_flags & QIB_R_RSP_SEND) { 424 unsigned long flags; 425 426 qp->r_flags &= ~QIB_R_RSP_SEND; 427 spin_lock_irqsave(&qp->s_lock, flags); 428 if (ib_qib_state_ops[qp->state] & 429 QIB_PROCESS_OR_FLUSH_SEND) 430 qib_schedule_send(qp); 431 spin_unlock_irqrestore(&qp->s_lock, flags); 432 } 433 if (atomic_dec_and_test(&qp->refcount)) 434 wake_up(&qp->wait); 435 } 436 437bail: 438 /* Report number of packets consumed */ 439 if (npkts) 440 *npkts = i; 441 442 /* 443 * Always write head at end, and setup rcv interrupt, even 444 * if no packets were processed. 445 */ 446 lval = (u64)rcd->head | dd->rhdrhead_intr_off; 447 dd->f_update_usrhead(rcd, lval, updegr, etail); 448 return crcs; 449} 450 451/** 452 * qib_set_mtu - set the MTU 453 * @ppd: the perport data 454 * @arg: the new MTU 455 * 456 * We can handle "any" incoming size, the issue here is whether we 457 * need to restrict our outgoing size. For now, we don't do any 458 * sanity checking on this, and we don't deal with what happens to 459 * programs that are already running when the size changes. 460 * NOTE: changing the MTU will usually cause the IBC to go back to 461 * link INIT state... 462 */ 463int qib_set_mtu(struct qib_pportdata *ppd, u16 arg) 464{ 465 u32 piosize; 466 int ret, chk; 467 468 if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 && 469 arg != 4096) { 470 ret = -EINVAL; 471 goto bail; 472 } 473 chk = ib_mtu_enum_to_int(qib_ibmtu); 474 if (chk > 0 && arg > chk) { 475 ret = -EINVAL; 476 goto bail; 477 } 478 479 piosize = ppd->ibmaxlen; 480 ppd->ibmtu = arg; 481 482 if (arg >= (piosize - QIB_PIO_MAXIBHDR)) { 483 /* Only if it's not the initial value (or reset to it) */ 484 if (piosize != ppd->init_ibmaxlen) { 485 if (arg > piosize && arg <= ppd->init_ibmaxlen) 486 piosize = ppd->init_ibmaxlen - 2 * sizeof(u32); 487 ppd->ibmaxlen = piosize; 488 } 489 } else if ((arg + QIB_PIO_MAXIBHDR) != ppd->ibmaxlen) { 490 piosize = arg + QIB_PIO_MAXIBHDR - 2 * sizeof(u32); 491 ppd->ibmaxlen = piosize; 492 } 493 494 ppd->dd->f_set_ib_cfg(ppd, QIB_IB_CFG_MTU, 0); 495 496 ret = 0; 497 498bail: 499 return ret; 500} 501 502int qib_set_lid(struct qib_pportdata *ppd, u32 lid, u8 lmc) 503{ 504 struct qib_devdata *dd = ppd->dd; 505 ppd->lid = lid; 506 ppd->lmc = lmc; 507 508 dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LIDLMC, 509 lid | (~((1U << lmc) - 1)) << 16); 510 511 qib_devinfo(dd->pcidev, "IB%u:%u got a lid: 0x%x\n", 512 dd->unit, ppd->port, lid); 513 514 return 0; 515} 516 517/* 518 * Following deal with the "obviously simple" task of overriding the state 519 * of the LEDS, which normally indicate link physical and logical status. 520 * The complications arise in dealing with different hardware mappings 521 * and the board-dependent routine being called from interrupts. 522 * and then there's the requirement to _flash_ them. 523 */ 524#define LED_OVER_FREQ_SHIFT 8 525#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT) 526/* Below is "non-zero" to force override, but both actual LEDs are off */ 527#define LED_OVER_BOTH_OFF (8) 528 529static void qib_run_led_override(unsigned long opaque) 530{ 531 struct qib_pportdata *ppd = (struct qib_pportdata *)opaque; 532 struct qib_devdata *dd = ppd->dd; 533 int timeoff; 534 int ph_idx; 535 536 if (!(dd->flags & QIB_INITTED)) 537 return; 538 539 ph_idx = ppd->led_override_phase++ & 1; 540 ppd->led_override = ppd->led_override_vals[ph_idx]; 541 timeoff = ppd->led_override_timeoff; 542 543 dd->f_setextled(ppd, 1); 544 /* 545 * don't re-fire the timer if user asked for it to be off; we let 546 * it fire one more time after they turn it off to simplify 547 */ 548 if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) 549 mod_timer(&ppd->led_override_timer, jiffies + timeoff); 550} 551 552void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val) 553{ 554 struct qib_devdata *dd = ppd->dd; 555 int timeoff, freq; 556 557 if (!(dd->flags & QIB_INITTED)) 558 return; 559 560 /* First check if we are blinking. If not, use 1HZ polling */ 561 timeoff = HZ; 562 freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT; 563 564 if (freq) { 565 /* For blink, set each phase from one nybble of val */ 566 ppd->led_override_vals[0] = val & 0xF; 567 ppd->led_override_vals[1] = (val >> 4) & 0xF; 568 timeoff = (HZ << 4)/freq; 569 } else { 570 /* Non-blink set both phases the same. */ 571 ppd->led_override_vals[0] = val & 0xF; 572 ppd->led_override_vals[1] = val & 0xF; 573 } 574 ppd->led_override_timeoff = timeoff; 575 576 /* 577 * If the timer has not already been started, do so. Use a "quick" 578 * timeout so the function will be called soon, to look at our request. 579 */ 580 if (atomic_inc_return(&ppd->led_override_timer_active) == 1) { 581 /* Need to start timer */ 582 init_timer(&ppd->led_override_timer); 583 ppd->led_override_timer.function = qib_run_led_override; 584 ppd->led_override_timer.data = (unsigned long) ppd; 585 ppd->led_override_timer.expires = jiffies + 1; 586 add_timer(&ppd->led_override_timer); 587 } else { 588 if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) 589 mod_timer(&ppd->led_override_timer, jiffies + 1); 590 atomic_dec(&ppd->led_override_timer_active); 591 } 592} 593 594/** 595 * qib_reset_device - reset the chip if possible 596 * @unit: the device to reset 597 * 598 * Whether or not reset is successful, we attempt to re-initialize the chip 599 * (that is, much like a driver unload/reload). We clear the INITTED flag 600 * so that the various entry points will fail until we reinitialize. For 601 * now, we only allow this if no user contexts are open that use chip resources 602 */ 603int qib_reset_device(int unit) 604{ 605 int ret, i; 606 struct qib_devdata *dd = qib_lookup(unit); 607 struct qib_pportdata *ppd; 608 unsigned long flags; 609 int pidx; 610 611 if (!dd) { 612 ret = -ENODEV; 613 goto bail; 614 } 615 616 qib_devinfo(dd->pcidev, "Reset on unit %u requested\n", unit); 617 618 if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) { 619 qib_devinfo(dd->pcidev, "Invalid unit number %u or " 620 "not initialized or not present\n", unit); 621 ret = -ENXIO; 622 goto bail; 623 } 624 625 spin_lock_irqsave(&dd->uctxt_lock, flags); 626 if (dd->rcd) 627 for (i = dd->first_user_ctxt; i < dd->cfgctxts; i++) { 628 if (!dd->rcd[i] || !dd->rcd[i]->cnt) 629 continue; 630 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 631 ret = -EBUSY; 632 goto bail; 633 } 634 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 635 636 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 637 ppd = dd->pport + pidx; 638 if (atomic_read(&ppd->led_override_timer_active)) { 639 /* Need to stop LED timer, _then_ shut off LEDs */ 640 del_timer_sync(&ppd->led_override_timer); 641 atomic_set(&ppd->led_override_timer_active, 0); 642 } 643 644 /* Shut off LEDs after we are sure timer is not running */ 645 ppd->led_override = LED_OVER_BOTH_OFF; 646 dd->f_setextled(ppd, 0); 647 if (dd->flags & QIB_HAS_SEND_DMA) 648 qib_teardown_sdma(ppd); 649 } 650 651 ret = dd->f_reset(dd); 652 if (ret == 1) 653 ret = qib_init(dd, 1); 654 else 655 ret = -EAGAIN; 656 if (ret) 657 qib_dev_err(dd, "Reinitialize unit %u after " 658 "reset failed with %d\n", unit, ret); 659 else 660 qib_devinfo(dd->pcidev, "Reinitialized unit %u after " 661 "resetting\n", unit); 662 663bail: 664 return ret; 665} 666