1/* 2 * Driver for Linear Technology LTC4215 I2C Hot Swap Controller 3 * 4 * Copyright (C) 2009 Ira W. Snyder <iws@ovro.caltech.edu> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; version 2 of the License. 9 * 10 * Datasheet: 11 * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697 12 */ 13 14#include <linux/kernel.h> 15#include <linux/module.h> 16#include <linux/init.h> 17#include <linux/err.h> 18#include <linux/slab.h> 19#include <linux/i2c.h> 20#include <linux/hwmon.h> 21#include <linux/hwmon-sysfs.h> 22 23/* Here are names of the chip's registers (a.k.a. commands) */ 24enum ltc4215_cmd { 25 LTC4215_CONTROL = 0x00, /* rw */ 26 LTC4215_ALERT = 0x01, /* rw */ 27 LTC4215_STATUS = 0x02, /* ro */ 28 LTC4215_FAULT = 0x03, /* rw */ 29 LTC4215_SENSE = 0x04, /* rw */ 30 LTC4215_SOURCE = 0x05, /* rw */ 31 LTC4215_ADIN = 0x06, /* rw */ 32}; 33 34struct ltc4215_data { 35 struct device *hwmon_dev; 36 37 struct mutex update_lock; 38 bool valid; 39 unsigned long last_updated; /* in jiffies */ 40 41 /* Registers */ 42 u8 regs[7]; 43}; 44 45static struct ltc4215_data *ltc4215_update_device(struct device *dev) 46{ 47 struct i2c_client *client = to_i2c_client(dev); 48 struct ltc4215_data *data = i2c_get_clientdata(client); 49 s32 val; 50 int i; 51 52 mutex_lock(&data->update_lock); 53 54 /* The chip's A/D updates 10 times per second */ 55 if (time_after(jiffies, data->last_updated + HZ / 10) || !data->valid) { 56 57 dev_dbg(&client->dev, "Starting ltc4215 update\n"); 58 59 /* Read all registers */ 60 for (i = 0; i < ARRAY_SIZE(data->regs); i++) { 61 val = i2c_smbus_read_byte_data(client, i); 62 if (unlikely(val < 0)) 63 data->regs[i] = 0; 64 else 65 data->regs[i] = val; 66 } 67 68 data->last_updated = jiffies; 69 data->valid = 1; 70 } 71 72 mutex_unlock(&data->update_lock); 73 74 return data; 75} 76 77/* Return the voltage from the given register in millivolts */ 78static int ltc4215_get_voltage(struct device *dev, u8 reg) 79{ 80 struct ltc4215_data *data = ltc4215_update_device(dev); 81 const u8 regval = data->regs[reg]; 82 u32 voltage = 0; 83 84 switch (reg) { 85 case LTC4215_SENSE: 86 /* 151 uV per increment */ 87 voltage = regval * 151 / 1000; 88 break; 89 case LTC4215_SOURCE: 90 /* 60.5 mV per increment */ 91 voltage = regval * 605 / 10; 92 break; 93 case LTC4215_ADIN: 94 /* The ADIN input is divided by 12.5, and has 4.82 mV 95 * per increment, so we have the additional multiply */ 96 voltage = regval * 482 * 125 / 1000; 97 break; 98 default: 99 /* If we get here, the developer messed up */ 100 WARN_ON_ONCE(1); 101 break; 102 } 103 104 return voltage; 105} 106 107/* Return the current from the sense resistor in mA */ 108static unsigned int ltc4215_get_current(struct device *dev) 109{ 110 struct ltc4215_data *data = ltc4215_update_device(dev); 111 112 /* The strange looking conversions that follow are fixed-point 113 * math, since we cannot do floating point in the kernel. 114 * 115 * Step 1: convert sense register to microVolts 116 * Step 2: convert voltage to milliAmperes 117 * 118 * If you play around with the V=IR equation, you come up with 119 * the following: X uV / Y mOhm == Z mA 120 * 121 * With the resistors that are fractions of a milliOhm, we multiply 122 * the voltage and resistance by 10, to shift the decimal point. 123 * Now we can use the normal division operator again. 124 */ 125 126 /* Calculate voltage in microVolts (151 uV per increment) */ 127 const unsigned int voltage = data->regs[LTC4215_SENSE] * 151; 128 129 /* Calculate current in milliAmperes (4 milliOhm sense resistor) */ 130 const unsigned int curr = voltage / 4; 131 132 return curr; 133} 134 135static ssize_t ltc4215_show_voltage(struct device *dev, 136 struct device_attribute *da, 137 char *buf) 138{ 139 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); 140 const int voltage = ltc4215_get_voltage(dev, attr->index); 141 142 return snprintf(buf, PAGE_SIZE, "%d\n", voltage); 143} 144 145static ssize_t ltc4215_show_current(struct device *dev, 146 struct device_attribute *da, 147 char *buf) 148{ 149 const unsigned int curr = ltc4215_get_current(dev); 150 151 return snprintf(buf, PAGE_SIZE, "%u\n", curr); 152} 153 154static ssize_t ltc4215_show_power(struct device *dev, 155 struct device_attribute *da, 156 char *buf) 157{ 158 const unsigned int curr = ltc4215_get_current(dev); 159 const int output_voltage = ltc4215_get_voltage(dev, LTC4215_ADIN); 160 161 /* current in mA * voltage in mV == power in uW */ 162 const unsigned int power = abs(output_voltage * curr); 163 164 return snprintf(buf, PAGE_SIZE, "%u\n", power); 165} 166 167static ssize_t ltc4215_show_alarm(struct device *dev, 168 struct device_attribute *da, 169 char *buf) 170{ 171 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da); 172 struct ltc4215_data *data = ltc4215_update_device(dev); 173 const u8 reg = data->regs[attr->index]; 174 const u32 mask = attr->nr; 175 176 return snprintf(buf, PAGE_SIZE, "%u\n", (reg & mask) ? 1 : 0); 177} 178 179/* These macros are used below in constructing device attribute objects 180 * for use with sysfs_create_group() to make a sysfs device file 181 * for each register. 182 */ 183 184#define LTC4215_VOLTAGE(name, ltc4215_cmd_idx) \ 185 static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ 186 ltc4215_show_voltage, NULL, ltc4215_cmd_idx) 187 188#define LTC4215_CURRENT(name) \ 189 static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ 190 ltc4215_show_current, NULL, 0); 191 192#define LTC4215_POWER(name) \ 193 static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ 194 ltc4215_show_power, NULL, 0); 195 196#define LTC4215_ALARM(name, mask, reg) \ 197 static SENSOR_DEVICE_ATTR_2(name, S_IRUGO, \ 198 ltc4215_show_alarm, NULL, (mask), reg) 199 200/* Construct a sensor_device_attribute structure for each register */ 201 202/* Current */ 203LTC4215_CURRENT(curr1_input); 204LTC4215_ALARM(curr1_max_alarm, (1 << 2), LTC4215_STATUS); 205 206/* Power (virtual) */ 207LTC4215_POWER(power1_input); 208LTC4215_ALARM(power1_alarm, (1 << 3), LTC4215_STATUS); 209 210/* Input Voltage */ 211LTC4215_VOLTAGE(in1_input, LTC4215_ADIN); 212LTC4215_ALARM(in1_max_alarm, (1 << 0), LTC4215_STATUS); 213LTC4215_ALARM(in1_min_alarm, (1 << 1), LTC4215_STATUS); 214 215/* Output Voltage */ 216LTC4215_VOLTAGE(in2_input, LTC4215_SOURCE); 217 218/* Finally, construct an array of pointers to members of the above objects, 219 * as required for sysfs_create_group() 220 */ 221static struct attribute *ltc4215_attributes[] = { 222 &sensor_dev_attr_curr1_input.dev_attr.attr, 223 &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, 224 225 &sensor_dev_attr_power1_input.dev_attr.attr, 226 &sensor_dev_attr_power1_alarm.dev_attr.attr, 227 228 &sensor_dev_attr_in1_input.dev_attr.attr, 229 &sensor_dev_attr_in1_max_alarm.dev_attr.attr, 230 &sensor_dev_attr_in1_min_alarm.dev_attr.attr, 231 232 &sensor_dev_attr_in2_input.dev_attr.attr, 233 234 NULL, 235}; 236 237static const struct attribute_group ltc4215_group = { 238 .attrs = ltc4215_attributes, 239}; 240 241static int ltc4215_probe(struct i2c_client *client, 242 const struct i2c_device_id *id) 243{ 244 struct i2c_adapter *adapter = client->adapter; 245 struct ltc4215_data *data; 246 int ret; 247 248 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 249 return -ENODEV; 250 251 data = kzalloc(sizeof(*data), GFP_KERNEL); 252 if (!data) { 253 ret = -ENOMEM; 254 goto out_kzalloc; 255 } 256 257 i2c_set_clientdata(client, data); 258 mutex_init(&data->update_lock); 259 260 /* Initialize the LTC4215 chip */ 261 i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00); 262 263 /* Register sysfs hooks */ 264 ret = sysfs_create_group(&client->dev.kobj, <c4215_group); 265 if (ret) 266 goto out_sysfs_create_group; 267 268 data->hwmon_dev = hwmon_device_register(&client->dev); 269 if (IS_ERR(data->hwmon_dev)) { 270 ret = PTR_ERR(data->hwmon_dev); 271 goto out_hwmon_device_register; 272 } 273 274 return 0; 275 276out_hwmon_device_register: 277 sysfs_remove_group(&client->dev.kobj, <c4215_group); 278out_sysfs_create_group: 279 kfree(data); 280out_kzalloc: 281 return ret; 282} 283 284static int ltc4215_remove(struct i2c_client *client) 285{ 286 struct ltc4215_data *data = i2c_get_clientdata(client); 287 288 hwmon_device_unregister(data->hwmon_dev); 289 sysfs_remove_group(&client->dev.kobj, <c4215_group); 290 291 kfree(data); 292 293 return 0; 294} 295 296static const struct i2c_device_id ltc4215_id[] = { 297 { "ltc4215", 0 }, 298 { } 299}; 300MODULE_DEVICE_TABLE(i2c, ltc4215_id); 301 302/* This is the driver that will be inserted */ 303static struct i2c_driver ltc4215_driver = { 304 .driver = { 305 .name = "ltc4215", 306 }, 307 .probe = ltc4215_probe, 308 .remove = ltc4215_remove, 309 .id_table = ltc4215_id, 310}; 311 312static int __init ltc4215_init(void) 313{ 314 return i2c_add_driver(<c4215_driver); 315} 316 317static void __exit ltc4215_exit(void) 318{ 319 i2c_del_driver(<c4215_driver); 320} 321 322MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>"); 323MODULE_DESCRIPTION("LTC4215 driver"); 324MODULE_LICENSE("GPL"); 325 326module_init(ltc4215_init); 327module_exit(ltc4215_exit); 328