1/* 2 * Intel D82875P Memory Controller kernel module 3 * (C) 2003 Linux Networx (http://lnxi.com) 4 * This file may be distributed under the terms of the 5 * GNU General Public License. 6 * 7 * Written by Thayne Harbaugh 8 * Contributors: 9 * Wang Zhenyu at intel.com 10 * 11 * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 Exp $ 12 * 13 * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com 14 */ 15 16#include <linux/module.h> 17#include <linux/init.h> 18#include <linux/pci.h> 19#include <linux/pci_ids.h> 20#include <linux/edac.h> 21#include "edac_core.h" 22 23#define I82875P_REVISION " Ver: 2.0.2 " __DATE__ 24#define EDAC_MOD_STR "i82875p_edac" 25 26#define i82875p_printk(level, fmt, arg...) \ 27 edac_printk(level, "i82875p", fmt, ##arg) 28 29#define i82875p_mc_printk(mci, level, fmt, arg...) \ 30 edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg) 31 32#ifndef PCI_DEVICE_ID_INTEL_82875_0 33#define PCI_DEVICE_ID_INTEL_82875_0 0x2578 34#endif /* PCI_DEVICE_ID_INTEL_82875_0 */ 35 36#ifndef PCI_DEVICE_ID_INTEL_82875_6 37#define PCI_DEVICE_ID_INTEL_82875_6 0x257e 38#endif /* PCI_DEVICE_ID_INTEL_82875_6 */ 39 40/* four csrows in dual channel, eight in single channel */ 41#define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans)) 42 43/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */ 44#define I82875P_EAP 0x58 /* Error Address Pointer (32b) 45 * 46 * 31:12 block address 47 * 11:0 reserved 48 */ 49 50#define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b) 51 * 52 * 7:0 DRAM ECC Syndrome 53 */ 54 55#define I82875P_DES 0x5d /* DRAM Error Status (8b) 56 * 57 * 7:1 reserved 58 * 0 Error channel 0/1 59 */ 60 61#define I82875P_ERRSTS 0xc8 /* Error Status Register (16b) 62 * 63 * 15:10 reserved 64 * 9 non-DRAM lock error (ndlock) 65 * 8 Sftwr Generated SMI 66 * 7 ECC UE 67 * 6 reserved 68 * 5 MCH detects unimplemented cycle 69 * 4 AGP access outside GA 70 * 3 Invalid AGP access 71 * 2 Invalid GA translation table 72 * 1 Unsupported AGP command 73 * 0 ECC CE 74 */ 75 76#define I82875P_ERRCMD 0xca /* Error Command (16b) 77 * 78 * 15:10 reserved 79 * 9 SERR on non-DRAM lock 80 * 8 SERR on ECC UE 81 * 7 SERR on ECC CE 82 * 6 target abort on high exception 83 * 5 detect unimplemented cyc 84 * 4 AGP access outside of GA 85 * 3 SERR on invalid AGP access 86 * 2 invalid translation table 87 * 1 SERR on unsupported AGP command 88 * 0 reserved 89 */ 90 91/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */ 92#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b) 93 * 94 * 15:10 reserved 95 * 9 fast back-to-back - ro 0 96 * 8 SERR enable - ro 0 97 * 7 addr/data stepping - ro 0 98 * 6 parity err enable - ro 0 99 * 5 VGA palette snoop - ro 0 100 * 4 mem wr & invalidate - ro 0 101 * 3 special cycle - ro 0 102 * 2 bus master - ro 0 103 * 1 mem access dev6 - 0(dis),1(en) 104 * 0 IO access dev3 - 0(dis),1(en) 105 */ 106 107#define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b) 108 * 109 * 31:12 mem base addr [31:12] 110 * 11:4 address mask - ro 0 111 * 3 prefetchable - ro 0(non),1(pre) 112 * 2:1 mem type - ro 0 113 * 0 mem space - ro 0 114 */ 115 116/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */ 117 118#define I82875P_DRB_SHIFT 26 /* 64MiB grain */ 119#define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8) 120 * 121 * 7 reserved 122 * 6:0 64MiB row boundary addr 123 */ 124 125#define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8) 126 * 127 * 7 reserved 128 * 6:4 row attr row 1 129 * 3 reserved 130 * 2:0 row attr row 0 131 * 132 * 000 = 4KiB 133 * 001 = 8KiB 134 * 010 = 16KiB 135 * 011 = 32KiB 136 */ 137 138#define I82875P_DRC 0x68 /* DRAM Controller Mode (32b) 139 * 140 * 31:30 reserved 141 * 29 init complete 142 * 28:23 reserved 143 * 22:21 nr chan 00=1,01=2 144 * 20 reserved 145 * 19:18 Data Integ Mode 00=none,01=ecc 146 * 17:11 reserved 147 * 10:8 refresh mode 148 * 7 reserved 149 * 6:4 mode select 150 * 3:2 reserved 151 * 1:0 DRAM type 01=DDR 152 */ 153 154enum i82875p_chips { 155 I82875P = 0, 156}; 157 158struct i82875p_pvt { 159 struct pci_dev *ovrfl_pdev; 160 void __iomem *ovrfl_window; 161}; 162 163struct i82875p_dev_info { 164 const char *ctl_name; 165}; 166 167struct i82875p_error_info { 168 u16 errsts; 169 u32 eap; 170 u8 des; 171 u8 derrsyn; 172 u16 errsts2; 173}; 174 175static const struct i82875p_dev_info i82875p_devs[] = { 176 [I82875P] = { 177 .ctl_name = "i82875p"}, 178}; 179 180static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has 181 * already registered driver 182 */ 183 184static struct edac_pci_ctl_info *i82875p_pci; 185 186static void i82875p_get_error_info(struct mem_ctl_info *mci, 187 struct i82875p_error_info *info) 188{ 189 struct pci_dev *pdev; 190 191 pdev = to_pci_dev(mci->dev); 192 193 /* 194 * This is a mess because there is no atomic way to read all the 195 * registers at once and the registers can transition from CE being 196 * overwritten by UE. 197 */ 198 pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts); 199 200 if (!(info->errsts & 0x0081)) 201 return; 202 203 pci_read_config_dword(pdev, I82875P_EAP, &info->eap); 204 pci_read_config_byte(pdev, I82875P_DES, &info->des); 205 pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn); 206 pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2); 207 208 /* 209 * If the error is the same then we can for both reads then 210 * the first set of reads is valid. If there is a change then 211 * there is a CE no info and the second set of reads is valid 212 * and should be UE info. 213 */ 214 if ((info->errsts ^ info->errsts2) & 0x0081) { 215 pci_read_config_dword(pdev, I82875P_EAP, &info->eap); 216 pci_read_config_byte(pdev, I82875P_DES, &info->des); 217 pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn); 218 } 219 220 pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081); 221} 222 223static int i82875p_process_error_info(struct mem_ctl_info *mci, 224 struct i82875p_error_info *info, 225 int handle_errors) 226{ 227 int row, multi_chan; 228 229 multi_chan = mci->csrows[0].nr_channels - 1; 230 231 if (!(info->errsts & 0x0081)) 232 return 0; 233 234 if (!handle_errors) 235 return 1; 236 237 if ((info->errsts ^ info->errsts2) & 0x0081) { 238 edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); 239 info->errsts = info->errsts2; 240 } 241 242 info->eap >>= PAGE_SHIFT; 243 row = edac_mc_find_csrow_by_page(mci, info->eap); 244 245 if (info->errsts & 0x0080) 246 edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE"); 247 else 248 edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, 249 multi_chan ? (info->des & 0x1) : 0, 250 "i82875p CE"); 251 252 return 1; 253} 254 255static void i82875p_check(struct mem_ctl_info *mci) 256{ 257 struct i82875p_error_info info; 258 259 debugf1("MC%d: %s()\n", mci->mc_idx, __func__); 260 i82875p_get_error_info(mci, &info); 261 i82875p_process_error_info(mci, &info, 1); 262} 263 264/* Return 0 on success or 1 on failure. */ 265static int i82875p_setup_overfl_dev(struct pci_dev *pdev, 266 struct pci_dev **ovrfl_pdev, 267 void __iomem **ovrfl_window) 268{ 269 struct pci_dev *dev; 270 void __iomem *window; 271 int err; 272 273 *ovrfl_pdev = NULL; 274 *ovrfl_window = NULL; 275 dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); 276 277 if (dev == NULL) { 278 /* Intel tells BIOS developers to hide device 6 which 279 * configures the overflow device access containing 280 * the DRBs - this is where we expose device 6. 281 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm 282 */ 283 pci_write_bits8(pdev, 0xf4, 0x2, 0x2); 284 dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0)); 285 286 if (dev == NULL) 287 return 1; 288 289 err = pci_bus_add_device(dev); 290 if (err) { 291 i82875p_printk(KERN_ERR, 292 "%s(): pci_bus_add_device() Failed\n", 293 __func__); 294 } 295 pci_bus_assign_resources(dev->bus); 296 } 297 298 *ovrfl_pdev = dev; 299 300 if (pci_enable_device(dev)) { 301 i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow " 302 "device\n", __func__); 303 return 1; 304 } 305 306 if (pci_request_regions(dev, pci_name(dev))) { 307#ifdef CORRECT_BIOS 308 goto fail0; 309#endif 310 } 311 312 /* cache is irrelevant for PCI bus reads/writes */ 313 window = pci_ioremap_bar(dev, 0); 314 if (window == NULL) { 315 i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n", 316 __func__); 317 goto fail1; 318 } 319 320 *ovrfl_window = window; 321 return 0; 322 323fail1: 324 pci_release_regions(dev); 325 326#ifdef CORRECT_BIOS 327fail0: 328 pci_disable_device(dev); 329#endif 330 /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ 331 return 1; 332} 333 334/* Return 1 if dual channel mode is active. Else return 0. */ 335static inline int dual_channel_active(u32 drc) 336{ 337 return (drc >> 21) & 0x1; 338} 339 340static void i82875p_init_csrows(struct mem_ctl_info *mci, 341 struct pci_dev *pdev, 342 void __iomem * ovrfl_window, u32 drc) 343{ 344 struct csrow_info *csrow; 345 unsigned long last_cumul_size; 346 u8 value; 347 u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ 348 u32 cumul_size; 349 int index; 350 351 drc_ddim = (drc >> 18) & 0x1; 352 last_cumul_size = 0; 353 354 /* The dram row boundary (DRB) reg values are boundary address 355 * for each DRAM row with a granularity of 32 or 64MB (single/dual 356 * channel operation). DRB regs are cumulative; therefore DRB7 will 357 * contain the total memory contained in all eight rows. 358 */ 359 360 for (index = 0; index < mci->nr_csrows; index++) { 361 csrow = &mci->csrows[index]; 362 363 value = readb(ovrfl_window + I82875P_DRB + index); 364 cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT); 365 debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, 366 cumul_size); 367 if (cumul_size == last_cumul_size) 368 continue; /* not populated */ 369 370 csrow->first_page = last_cumul_size; 371 csrow->last_page = cumul_size - 1; 372 csrow->nr_pages = cumul_size - last_cumul_size; 373 last_cumul_size = cumul_size; 374 csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */ 375 csrow->mtype = MEM_DDR; 376 csrow->dtype = DEV_UNKNOWN; 377 csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE; 378 } 379} 380 381static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) 382{ 383 int rc = -ENODEV; 384 struct mem_ctl_info *mci; 385 struct i82875p_pvt *pvt; 386 struct pci_dev *ovrfl_pdev; 387 void __iomem *ovrfl_window; 388 u32 drc; 389 u32 nr_chans; 390 struct i82875p_error_info discard; 391 392 debugf0("%s()\n", __func__); 393 394 ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); 395 396 if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window)) 397 return -ENODEV; 398 drc = readl(ovrfl_window + I82875P_DRC); 399 nr_chans = dual_channel_active(drc) + 1; 400 mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans), 401 nr_chans, 0); 402 403 if (!mci) { 404 rc = -ENOMEM; 405 goto fail0; 406 } 407 408 /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */ 409 kobject_get(&mci->edac_mci_kobj); 410 411 debugf3("%s(): init mci\n", __func__); 412 mci->dev = &pdev->dev; 413 mci->mtype_cap = MEM_FLAG_DDR; 414 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 415 mci->edac_cap = EDAC_FLAG_UNKNOWN; 416 mci->mod_name = EDAC_MOD_STR; 417 mci->mod_ver = I82875P_REVISION; 418 mci->ctl_name = i82875p_devs[dev_idx].ctl_name; 419 mci->dev_name = pci_name(pdev); 420 mci->edac_check = i82875p_check; 421 mci->ctl_page_to_phys = NULL; 422 debugf3("%s(): init pvt\n", __func__); 423 pvt = (struct i82875p_pvt *)mci->pvt_info; 424 pvt->ovrfl_pdev = ovrfl_pdev; 425 pvt->ovrfl_window = ovrfl_window; 426 i82875p_init_csrows(mci, pdev, ovrfl_window, drc); 427 i82875p_get_error_info(mci, &discard); /* clear counters */ 428 429 /* Here we assume that we will never see multiple instances of this 430 * type of memory controller. The ID is therefore hardcoded to 0. 431 */ 432 if (edac_mc_add_mc(mci)) { 433 debugf3("%s(): failed edac_mc_add_mc()\n", __func__); 434 goto fail1; 435 } 436 437 /* allocating generic PCI control info */ 438 i82875p_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); 439 if (!i82875p_pci) { 440 printk(KERN_WARNING 441 "%s(): Unable to create PCI control\n", 442 __func__); 443 printk(KERN_WARNING 444 "%s(): PCI error report via EDAC not setup\n", 445 __func__); 446 } 447 448 /* get this far and it's successful */ 449 debugf3("%s(): success\n", __func__); 450 return 0; 451 452fail1: 453 kobject_put(&mci->edac_mci_kobj); 454 edac_mc_free(mci); 455 456fail0: 457 iounmap(ovrfl_window); 458 pci_release_regions(ovrfl_pdev); 459 460 pci_disable_device(ovrfl_pdev); 461 /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ 462 return rc; 463} 464 465/* returns count (>= 0), or negative on error */ 466static int __devinit i82875p_init_one(struct pci_dev *pdev, 467 const struct pci_device_id *ent) 468{ 469 int rc; 470 471 debugf0("%s()\n", __func__); 472 i82875p_printk(KERN_INFO, "i82875p init one\n"); 473 474 if (pci_enable_device(pdev) < 0) 475 return -EIO; 476 477 rc = i82875p_probe1(pdev, ent->driver_data); 478 479 if (mci_pdev == NULL) 480 mci_pdev = pci_dev_get(pdev); 481 482 return rc; 483} 484 485static void __devexit i82875p_remove_one(struct pci_dev *pdev) 486{ 487 struct mem_ctl_info *mci; 488 struct i82875p_pvt *pvt = NULL; 489 490 debugf0("%s()\n", __func__); 491 492 if (i82875p_pci) 493 edac_pci_release_generic_ctl(i82875p_pci); 494 495 if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) 496 return; 497 498 pvt = (struct i82875p_pvt *)mci->pvt_info; 499 500 if (pvt->ovrfl_window) 501 iounmap(pvt->ovrfl_window); 502 503 if (pvt->ovrfl_pdev) { 504#ifdef CORRECT_BIOS 505 pci_release_regions(pvt->ovrfl_pdev); 506#endif /*CORRECT_BIOS */ 507 pci_disable_device(pvt->ovrfl_pdev); 508 pci_dev_put(pvt->ovrfl_pdev); 509 } 510 511 edac_mc_free(mci); 512} 513 514static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = { 515 { 516 PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, 517 I82875P}, 518 { 519 0, 520 } /* 0 terminated list. */ 521}; 522 523MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl); 524 525static struct pci_driver i82875p_driver = { 526 .name = EDAC_MOD_STR, 527 .probe = i82875p_init_one, 528 .remove = __devexit_p(i82875p_remove_one), 529 .id_table = i82875p_pci_tbl, 530}; 531 532static int __init i82875p_init(void) 533{ 534 int pci_rc; 535 536 debugf3("%s()\n", __func__); 537 538 /* Ensure that the OPSTATE is set correctly for POLL or NMI */ 539 opstate_init(); 540 541 pci_rc = pci_register_driver(&i82875p_driver); 542 543 if (pci_rc < 0) 544 goto fail0; 545 546 if (mci_pdev == NULL) { 547 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 548 PCI_DEVICE_ID_INTEL_82875_0, NULL); 549 550 if (!mci_pdev) { 551 debugf0("875p pci_get_device fail\n"); 552 pci_rc = -ENODEV; 553 goto fail1; 554 } 555 556 pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl); 557 558 if (pci_rc < 0) { 559 debugf0("875p init fail\n"); 560 pci_rc = -ENODEV; 561 goto fail1; 562 } 563 } 564 565 return 0; 566 567fail1: 568 pci_unregister_driver(&i82875p_driver); 569 570fail0: 571 if (mci_pdev != NULL) 572 pci_dev_put(mci_pdev); 573 574 return pci_rc; 575} 576 577static void __exit i82875p_exit(void) 578{ 579 debugf3("%s()\n", __func__); 580 581 i82875p_remove_one(mci_pdev); 582 pci_dev_put(mci_pdev); 583 584 pci_unregister_driver(&i82875p_driver); 585 586} 587 588module_init(i82875p_init); 589module_exit(i82875p_exit); 590 591MODULE_LICENSE("GPL"); 592MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); 593MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers"); 594 595module_param(edac_op_state, int, 0444); 596MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); 597