1/* 2** ----------------------------------------------------------------------------- 3** 4** Perle Specialix driver for Linux 5** Ported from existing RIO Driver for SCO sources. 6 * 7 * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22** 23** Module : daemon.h 24** SID : 1.3 25** Last Modified : 11/6/98 11:34:09 26** Retrieved : 11/6/98 11:34:21 27** 28** ident @(#)daemon.h 1.3 29** 30** ----------------------------------------------------------------------------- 31*/ 32 33#ifndef __rio_daemon_h__ 34#define __rio_daemon_h__ 35 36 37/* 38** structures used on /dev/rio 39*/ 40 41struct Error { 42 unsigned int Error; 43 unsigned int Entry; 44 unsigned int Other; 45}; 46 47struct DownLoad { 48 char __user *DataP; 49 unsigned int Count; 50 unsigned int ProductCode; 51}; 52 53/* 54** A few constants.... 55*/ 56#ifndef MAX_VERSION_LEN 57#define MAX_VERSION_LEN 256 58#endif 59 60#ifndef MAX_XP_CTRL_LEN 61#define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */ 62#endif 63 64struct PortSetup { 65 unsigned int From; /* Set/Clear XP & IXANY Control from this port.... */ 66 unsigned int To; /* .... to this port */ 67 unsigned int XpCps; /* at this speed */ 68 char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */ 69 char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */ 70 u8 IxAny; /* enable/disable IXANY */ 71 u8 IxOn; /* enable/disable IXON */ 72 u8 Lock; /* lock port params */ 73 u8 Store; /* store params across closes */ 74 u8 Drain; /* close only when drained */ 75}; 76 77struct LpbReq { 78 unsigned int Host; 79 unsigned int Link; 80 struct LPB __user *LpbP; 81}; 82 83struct RupReq { 84 unsigned int HostNum; 85 unsigned int RupNum; 86 struct RUP __user *RupP; 87}; 88 89struct PortReq { 90 unsigned int SysPort; 91 struct Port __user *PortP; 92}; 93 94struct StreamInfo { 95 unsigned int SysPort; 96 int RQueue; 97 int WQueue; 98}; 99 100struct HostReq { 101 unsigned int HostNum; 102 struct Host __user *HostP; 103}; 104 105struct HostDpRam { 106 unsigned int HostNum; 107 struct DpRam __user *DpRamP; 108}; 109 110struct DebugCtrl { 111 unsigned int SysPort; 112 unsigned int Debug; 113 unsigned int Wait; 114}; 115 116struct MapInfo { 117 unsigned int FirstPort; /* 8 ports, starting from this (tty) number */ 118 unsigned int RtaUnique; /* reside on this RTA (unique number) */ 119}; 120 121struct MapIn { 122 unsigned int NumEntries; /* How many port sets are we mapping? */ 123 struct MapInfo *MapInfoP; /* Pointer to (user space) info */ 124}; 125 126struct SendPack { 127 unsigned int PortNum; 128 unsigned char Len; 129 unsigned char Data[PKT_MAX_DATA_LEN]; 130}; 131 132struct SpecialRupCmd { 133 struct PKT Packet; 134 unsigned short Host; 135 unsigned short RupNum; 136}; 137 138struct IdentifyRta { 139 unsigned long RtaUnique; 140 u8 ID; 141}; 142 143struct KillNeighbour { 144 unsigned long UniqueNum; 145 u8 Link; 146}; 147 148struct rioVersion { 149 char version[MAX_VERSION_LEN]; 150 char relid[MAX_VERSION_LEN]; 151 int buildLevel; 152 char buildDate[MAX_VERSION_LEN]; 153}; 154 155 156/* 157** RIOC commands are for the daemon type operations 158** 159** 09.12.1998 ARG - ESIL 0776 part fix 160** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a 161** #ifndef here first. 162** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now 163** allowed to be used by customers. 164*/ 165#ifndef RIOC 166#define RIOC ('R'<<8)|('i'<<16)|('o'<<24) 167#endif 168 169/* 170** Boot stuff 171*/ 172#define RIO_GET_TABLE (RIOC | 100) 173#define RIO_PUT_TABLE (RIOC | 101) 174#define RIO_ASSIGN_RTA (RIOC | 102) 175#define RIO_DELETE_RTA (RIOC | 103) 176#define RIO_HOST_FOAD (RIOC | 104) 177#define RIO_QUICK_CHECK (RIOC | 105) 178#define RIO_SIGNALS_ON (RIOC | 106) 179#define RIO_SIGNALS_OFF (RIOC | 107) 180#define RIO_CHANGE_NAME (RIOC | 108) 181#define RIO_DOWNLOAD (RIOC | 109) 182#define RIO_GET_LOG (RIOC | 110) 183#define RIO_SETUP_PORTS (RIOC | 111) 184#define RIO_ALL_MODEM (RIOC | 112) 185 186/* 187** card state, debug stuff 188*/ 189#define RIO_NUM_HOSTS (RIOC | 120) 190#define RIO_HOST_LPB (RIOC | 121) 191#define RIO_HOST_RUP (RIOC | 122) 192#define RIO_HOST_PORT (RIOC | 123) 193#define RIO_PARMS (RIOC | 124) 194#define RIO_HOST_REQ (RIOC | 125) 195#define RIO_READ_CONFIG (RIOC | 126) 196#define RIO_SET_CONFIG (RIOC | 127) 197#define RIO_VERSID (RIOC | 128) 198#define RIO_FLAGS (RIOC | 129) 199#define RIO_SETDEBUG (RIOC | 130) 200#define RIO_GETDEBUG (RIOC | 131) 201#define RIO_READ_LEVELS (RIOC | 132) 202#define RIO_SET_FAST_BUS (RIOC | 133) 203#define RIO_SET_SLOW_BUS (RIOC | 134) 204#define RIO_SET_BYTE_MODE (RIOC | 135) 205#define RIO_SET_WORD_MODE (RIOC | 136) 206#define RIO_STREAM_INFO (RIOC | 137) 207#define RIO_START_POLLER (RIOC | 138) 208#define RIO_STOP_POLLER (RIOC | 139) 209#define RIO_LAST_ERROR (RIOC | 140) 210#define RIO_TICK (RIOC | 141) 211#define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */ 212#define RIO_SEND_PACKET (RIOC | 142) 213#define RIO_SET_BUSY (RIOC | 143) 214#define SPECIAL_RUP_CMD (RIOC | 144) 215#define RIO_FOAD_RTA (RIOC | 145) 216#define RIO_ZOMBIE_RTA (RIOC | 146) 217#define RIO_IDENTIFY_RTA (RIOC | 147) 218#define RIO_KILL_NEIGHBOUR (RIOC | 148) 219#define RIO_DEBUG_MEM (RIOC | 149) 220/* 221** 150 - 167 used..... See below 222*/ 223#define RIO_GET_PORT_SETUP (RIOC | 168) 224#define RIO_RESUME (RIOC | 169) 225#define RIO_MESG (RIOC | 170) 226#define RIO_NO_MESG (RIOC | 171) 227#define RIO_WHAT_MESG (RIOC | 172) 228#define RIO_HOST_DPRAM (RIOC | 173) 229#define RIO_MAP_B50_TO_50 (RIOC | 174) 230#define RIO_MAP_B50_TO_57600 (RIOC | 175) 231#define RIO_MAP_B110_TO_110 (RIOC | 176) 232#define RIO_MAP_B110_TO_115200 (RIOC | 177) 233#define RIO_GET_PORT_PARAMS (RIOC | 178) 234#define RIO_SET_PORT_PARAMS (RIOC | 179) 235#define RIO_GET_PORT_TTY (RIOC | 180) 236#define RIO_SET_PORT_TTY (RIOC | 181) 237#define RIO_SYSLOG_ONLY (RIOC | 182) 238#define RIO_SYSLOG_CONS (RIOC | 183) 239#define RIO_CONS_ONLY (RIOC | 184) 240#define RIO_BLOCK_OPENS (RIOC | 185) 241 242/* 243** 02.03.1999 ARG - ESIL 0820 fix : 244** RIOBootMode is no longer use by the driver, so these ioctls 245** are now obsolete : 246** 247#define RIO_GET_BOOT_MODE (RIOC | 186) 248#define RIO_SET_BOOT_MODE (RIOC | 187) 249** 250*/ 251 252#define RIO_MEM_DUMP (RIOC | 189) 253#define RIO_READ_REGISTER (RIOC | 190) 254#define RIO_GET_MODTYPE (RIOC | 191) 255#define RIO_SET_TIMER (RIOC | 192) 256#define RIO_READ_CHECK (RIOC | 196) 257#define RIO_WAITING_FOR_RESTART (RIOC | 197) 258#define RIO_BIND_RTA (RIOC | 198) 259#define RIO_GET_BINDINGS (RIOC | 199) 260#define RIO_PUT_BINDINGS (RIOC | 200) 261 262#define RIO_MAKE_DEV (RIOC | 201) 263#define RIO_MINOR (RIOC | 202) 264 265#define RIO_IDENTIFY_DRIVER (RIOC | 203) 266#define RIO_DISPLAY_HOST_CFG (RIOC | 204) 267 268 269/* 270** MAKE_DEV / MINOR stuff 271*/ 272#define RIO_DEV_DIRECT 0x0000 273#define RIO_DEV_MODEM 0x0200 274#define RIO_DEV_XPRINT 0x0400 275#define RIO_DEV_MASK 0x0600 276 277/* 278** port management, xprint stuff 279*/ 280#define rIOCN(N) (RIOC|(N)) 281#define rIOCR(N,T) (RIOC|(N)) 282#define rIOCW(N,T) (RIOC|(N)) 283 284#define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */ 285#define RIO_SET_XP_ON rIOCW(151,char[16]) 286#define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */ 287#define RIO_SET_XP_OFF rIOCW(153,char[16]) 288#define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */ 289#define RIO_SET_XP_CPS rIOCW(155,int) 290#define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */ 291#define RIO_SET_IXANY rIOCW(157,int) 292#define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */ 293#define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */ 294#define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */ 295#define RIO_SET_MODEM rIOCW(161,int) 296#define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */ 297#define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */ 298#define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */ 299#define RIO_SET_IXON rIOCW(165,int) 300#define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */ 301#define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */ 302 303#define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */ 304 305#define RIO_IOCTL_UNKNOWN -2 306 307#endif 308