1/****************************************************************************/ 2 3/* 4 * mcftimer.h -- ColdFire internal TIMER support defines. 5 * 6 * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com> 7 * (C) Copyright 2000, Lineo Inc. (www.lineo.com) 8 */ 9 10/****************************************************************************/ 11#ifndef mcftimer_h 12#define mcftimer_h 13/****************************************************************************/ 14 15 16/* 17 * Get address specific defines for this ColdFire member. 18 */ 19#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) 20#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ 21#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ 22#elif defined(CONFIG_M5272) 23#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ 24#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ 25#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ 26#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ 27#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) 28#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ 29#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ 30#elif defined(CONFIG_M532x) 31#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */ 32#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */ 33#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */ 34#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */ 35#endif 36 37 38/* 39 * Define the TIMER register set addresses. 40 */ 41#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ 42#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ 43#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ 44#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ 45#if defined(CONFIG_M532x) 46#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ 47#else 48#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ 49#endif 50 51/* 52 * Bit definitions for the Timer Mode Register (TMR). 53 * Register bit flags are common accross ColdFires. 54 */ 55#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ 56#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ 57#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ 58#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ 59#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ 60#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ 61#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ 62#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ 63#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ 64#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ 65#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ 66#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ 67#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ 68#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ 69#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ 70#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ 71#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ 72 73/* 74 * Bit definitions for the Timer Event Registers (TER). 75 */ 76#define MCFTIMER_TER_CAP 0x01 /* Capture event */ 77#define MCFTIMER_TER_REF 0x02 /* Refernece event */ 78 79/****************************************************************************/ 80#endif /* mcftimer_h */ 81