1/* 2 * linux/arch/alpha/kernel/sys_sio.c 3 * 4 * Copyright (C) 1995 David A Rusling 5 * Copyright (C) 1996 Jay A Estabrook 6 * Copyright (C) 1998, 1999 Richard Henderson 7 * 8 * Code for all boards that route the PCI interrupts through the SIO 9 * PCI/ISA bridge. This includes Noname (AXPpci33), Multia (UDB), 10 * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1. 11 */ 12 13#include <linux/kernel.h> 14#include <linux/types.h> 15#include <linux/mm.h> 16#include <linux/sched.h> 17#include <linux/pci.h> 18#include <linux/init.h> 19#include <linux/screen_info.h> 20 21#include <asm/compiler.h> 22#include <asm/ptrace.h> 23#include <asm/system.h> 24#include <asm/dma.h> 25#include <asm/irq.h> 26#include <asm/mmu_context.h> 27#include <asm/io.h> 28#include <asm/pgtable.h> 29#include <asm/core_apecs.h> 30#include <asm/core_lca.h> 31#include <asm/tlbflush.h> 32 33#include "proto.h" 34#include "irq_impl.h" 35#include "pci_impl.h" 36#include "machvec_impl.h" 37#include "pc873xx.h" 38 39#if defined(ALPHA_RESTORE_SRM_SETUP) 40/* Save LCA configuration data as the console had it set up. */ 41struct 42{ 43 unsigned int orig_route_tab; /* for SAVE/RESTORE */ 44} saved_config __attribute((common)); 45#endif 46 47 48static void __init 49sio_init_irq(void) 50{ 51 if (alpha_using_srm) 52 alpha_mv.device_interrupt = srm_device_interrupt; 53 54 init_i8259a_irqs(); 55 common_init_isa_dma(); 56} 57 58static inline void __init 59alphabook1_init_arch(void) 60{ 61 /* The AlphaBook1 has LCD video fixed at 800x600, 62 37 rows and 100 cols. */ 63 screen_info.orig_y = 37; 64 screen_info.orig_video_cols = 100; 65 screen_info.orig_video_lines = 37; 66 67 lca_init_arch(); 68} 69 70 71/* 72 * sio_route_tab selects irq routing in PCI/ISA bridge so that: 73 * PIRQ0 -> irq 15 74 * PIRQ1 -> irq 9 75 * PIRQ2 -> irq 10 76 * PIRQ3 -> irq 11 77 * 78 * This probably ought to be configurable via MILO. For 79 * example, sound boards seem to like using IRQ 9. 80 * 81 * This is NOT how we should do it. PIRQ0-X should have 82 * their own IRQs, the way intel uses the IO-APIC IRQs. 83 */ 84 85static void __init 86sio_pci_route(void) 87{ 88 unsigned int orig_route_tab; 89 90 /* First, ALWAYS read and print the original setting. */ 91 pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, 92 &orig_route_tab); 93 printk("%s: PIRQ original 0x%x new 0x%x\n", __func__, 94 orig_route_tab, alpha_mv.sys.sio.route_tab); 95 96#if defined(ALPHA_RESTORE_SRM_SETUP) 97 saved_config.orig_route_tab = orig_route_tab; 98#endif 99 100 /* Now override with desired setting. */ 101 pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, 102 alpha_mv.sys.sio.route_tab); 103} 104 105static unsigned int __init 106sio_collect_irq_levels(void) 107{ 108 unsigned int level_bits = 0; 109 struct pci_dev *dev = NULL; 110 111 /* Iterate through the devices, collecting IRQ levels. */ 112 for_each_pci_dev(dev) { 113 if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) && 114 (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA)) 115 continue; 116 117 if (dev->irq) 118 level_bits |= (1 << dev->irq); 119 } 120 return level_bits; 121} 122 123static void __init 124sio_fixup_irq_levels(unsigned int level_bits) 125{ 126 unsigned int old_level_bits; 127 128 /* 129 * Now, make all PCI interrupts level sensitive. Notice: 130 * these registers must be accessed byte-wise. inw()/outw() 131 * don't work. 132 * 133 * Make sure to turn off any level bits set for IRQs 9,10,11,15, 134 * so that the only bits getting set are for devices actually found. 135 * Note that we do preserve the remainder of the bits, which we hope 136 * will be set correctly by ARC/SRM. 137 * 138 * Note: we at least preserve any level-set bits on AlphaBook1 139 */ 140 old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8); 141 142 level_bits |= (old_level_bits & 0x71ff); 143 144 outb((level_bits >> 0) & 0xff, 0x4d0); 145 outb((level_bits >> 8) & 0xff, 0x4d1); 146} 147 148static inline int __init 149noname_map_irq(struct pci_dev *dev, u8 slot, u8 pin) 150{ 151 /* 152 * The Noname board has 5 PCI slots with each of the 4 153 * interrupt pins routed to different pins on the PCI/ISA 154 * bridge (PIRQ0-PIRQ3). The table below is based on 155 * information available at: 156 * 157 * http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt 158 * 159 * I have no information on the Avanti interrupt routing, but 160 * the routing seems to be identical to the Noname except 161 * that the Avanti has an additional slot whose routing I'm 162 * unsure of. 163 * 164 * pirq_tab[0] is a fake entry to deal with old PCI boards 165 * that have the interrupt pin number hardwired to 0 (meaning 166 * that they use the default INTA line, if they are interrupt 167 * driven at all). 168 */ 169 static char irq_tab[][5] __initdata = { 170 /*INT A B C D */ 171 { 3, 3, 3, 3, 3}, /* idsel 6 (53c810) */ 172 {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */ 173 { 2, 2, -1, -1, -1}, /* idsel 8 (Hack: slot closest ISA) */ 174 {-1, -1, -1, -1, -1}, /* idsel 9 (unused) */ 175 {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */ 176 { 0, 0, 2, 1, 0}, /* idsel 11 KN25_PCI_SLOT0 */ 177 { 1, 1, 0, 2, 1}, /* idsel 12 KN25_PCI_SLOT1 */ 178 { 2, 2, 1, 0, 2}, /* idsel 13 KN25_PCI_SLOT2 */ 179 { 0, 0, 0, 0, 0}, /* idsel 14 AS255 TULIP */ 180 }; 181 const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5; 182 int irq = COMMON_TABLE_LOOKUP, tmp; 183 tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq); 184 return irq >= 0 ? tmp : -1; 185} 186 187static inline int __init 188p2k_map_irq(struct pci_dev *dev, u8 slot, u8 pin) 189{ 190 static char irq_tab[][5] __initdata = { 191 /*INT A B C D */ 192 { 0, 0, -1, -1, -1}, /* idsel 6 (53c810) */ 193 {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */ 194 { 1, 1, 2, 3, 0}, /* idsel 8 (slot A) */ 195 { 2, 2, 3, 0, 1}, /* idsel 9 (slot B) */ 196 {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */ 197 {-1, -1, -1, -1, -1}, /* idsel 11 (unused) */ 198 { 3, 3, -1, -1, -1}, /* idsel 12 (CMD0646) */ 199 }; 200 const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5; 201 int irq = COMMON_TABLE_LOOKUP, tmp; 202 tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq); 203 return irq >= 0 ? tmp : -1; 204} 205 206static inline void __init 207noname_init_pci(void) 208{ 209 common_init_pci(); 210 sio_pci_route(); 211 sio_fixup_irq_levels(sio_collect_irq_levels()); 212 213 if (pc873xx_probe() == -1) { 214 printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); 215 } else { 216 printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", 217 pc873xx_get_model(), pc873xx_get_base()); 218 219 /* Enabling things in the Super IO chip doesn't actually 220 * configure and enable things, the legacy drivers still 221 * need to do the actual configuration and enabling. 222 * This only unblocks them. 223 */ 224 225#if !defined(CONFIG_ALPHA_AVANTI) 226 /* Don't bother on the Avanti family. 227 * None of them had on-board IDE. 228 */ 229 pc873xx_enable_ide(); 230#endif 231 pc873xx_enable_epp19(); 232 } 233} 234 235static inline void __init 236alphabook1_init_pci(void) 237{ 238 struct pci_dev *dev; 239 unsigned char orig, config; 240 241 common_init_pci(); 242 sio_pci_route(); 243 244 /* 245 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729) 246 * is sensitive to PCI bus bursts, so we must DISABLE 247 * burst mode for the NCR 8xx SCSI... :-( 248 * 249 * Note that the NCR810 SCSI driver must preserve the 250 * setting of the bit in order for this to work. At the 251 * moment (2.0.29), ncr53c8xx.c does NOT do this, but 252 * 53c7,8xx.c DOES. 253 */ 254 255 dev = NULL; 256 while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) { 257 if (dev->device == PCI_DEVICE_ID_NCR_53C810 258 || dev->device == PCI_DEVICE_ID_NCR_53C815 259 || dev->device == PCI_DEVICE_ID_NCR_53C820 260 || dev->device == PCI_DEVICE_ID_NCR_53C825) { 261 unsigned long io_port; 262 unsigned char ctest4; 263 264 io_port = dev->resource[0].start; 265 ctest4 = inb(io_port+0x21); 266 if (!(ctest4 & 0x80)) { 267 printk("AlphaBook1 NCR init: setting" 268 " burst disable\n"); 269 outb(ctest4 | 0x80, io_port+0x21); 270 } 271 } 272 } 273 274 /* Do not set *ANY* level triggers for AlphaBook1. */ 275 sio_fixup_irq_levels(0); 276 277 outb(0x0f, 0x3ce); orig = inb(0x3cf); 278 outb(0x0f, 0x3ce); outb(0x05, 0x3cf); 279 outb(0x0b, 0x3ce); config = inb(0x3cf); 280 if ((config & 0xc0) != 0xc0) { 281 printk("AlphaBook1 VGA init: setting 1Mb memory\n"); 282 config |= 0xc0; 283 outb(0x0b, 0x3ce); outb(config, 0x3cf); 284 } 285 outb(0x0f, 0x3ce); outb(orig, 0x3cf); 286} 287 288void 289sio_kill_arch(int mode) 290{ 291#if defined(ALPHA_RESTORE_SRM_SETUP) 292 /* Since we cannot read the PCI DMA Window CSRs, we 293 * cannot restore them here. 294 * 295 * However, we CAN read the PIRQ route register, so restore it 296 * now... 297 */ 298 pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, 299 saved_config.orig_route_tab); 300#endif 301} 302 303 304/* 305 * The System Vectors 306 */ 307 308#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1) 309struct alpha_machine_vector alphabook1_mv __initmv = { 310 .vector_name = "AlphaBook1", 311 DO_EV4_MMU, 312 DO_DEFAULT_RTC, 313 DO_LCA_IO, 314 .machine_check = lca_machine_check, 315 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 316 .min_io_address = DEFAULT_IO_BASE, 317 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, 318 319 .nr_irqs = 16, 320 .device_interrupt = isa_device_interrupt, 321 322 .init_arch = alphabook1_init_arch, 323 .init_irq = sio_init_irq, 324 .init_rtc = common_init_rtc, 325 .init_pci = alphabook1_init_pci, 326 .kill_arch = sio_kill_arch, 327 .pci_map_irq = noname_map_irq, 328 .pci_swizzle = common_swizzle, 329 330 .sys = { .sio = { 331 /* NCR810 SCSI is 14, PCMCIA controller is 15. */ 332 .route_tab = 0x0e0f0a0a, 333 }} 334}; 335ALIAS_MV(alphabook1) 336#endif 337 338#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI) 339struct alpha_machine_vector avanti_mv __initmv = { 340 .vector_name = "Avanti", 341 DO_EV4_MMU, 342 DO_DEFAULT_RTC, 343 DO_APECS_IO, 344 .machine_check = apecs_machine_check, 345 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 346 .min_io_address = DEFAULT_IO_BASE, 347 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, 348 349 .nr_irqs = 16, 350 .device_interrupt = isa_device_interrupt, 351 352 .init_arch = apecs_init_arch, 353 .init_irq = sio_init_irq, 354 .init_rtc = common_init_rtc, 355 .init_pci = noname_init_pci, 356 .kill_arch = sio_kill_arch, 357 .pci_map_irq = noname_map_irq, 358 .pci_swizzle = common_swizzle, 359 360 .sys = { .sio = { 361 .route_tab = 0x0b0a050f, /* leave 14 for IDE, 9 for SND */ 362 }} 363}; 364ALIAS_MV(avanti) 365#endif 366 367#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME) 368struct alpha_machine_vector noname_mv __initmv = { 369 .vector_name = "Noname", 370 DO_EV4_MMU, 371 DO_DEFAULT_RTC, 372 DO_LCA_IO, 373 .machine_check = lca_machine_check, 374 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 375 .min_io_address = DEFAULT_IO_BASE, 376 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, 377 378 .nr_irqs = 16, 379 .device_interrupt = srm_device_interrupt, 380 381 .init_arch = lca_init_arch, 382 .init_irq = sio_init_irq, 383 .init_rtc = common_init_rtc, 384 .init_pci = noname_init_pci, 385 .kill_arch = sio_kill_arch, 386 .pci_map_irq = noname_map_irq, 387 .pci_swizzle = common_swizzle, 388 389 .sys = { .sio = { 390 /* For UDB, the only available PCI slot must not map to IRQ 9, 391 since that's the builtin MSS sound chip. That PCI slot 392 will map to PIRQ1 (for INTA at least), so we give it IRQ 15 393 instead. 394 395 Unfortunately we have to do this for NONAME as well, since 396 they are co-indicated when the platform type "Noname" is 397 selected... :-( */ 398 399 .route_tab = 0x0b0a0f0d, 400 }} 401}; 402ALIAS_MV(noname) 403#endif 404 405#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K) 406struct alpha_machine_vector p2k_mv __initmv = { 407 .vector_name = "Platform2000", 408 DO_EV4_MMU, 409 DO_DEFAULT_RTC, 410 DO_LCA_IO, 411 .machine_check = lca_machine_check, 412 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 413 .min_io_address = DEFAULT_IO_BASE, 414 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, 415 416 .nr_irqs = 16, 417 .device_interrupt = srm_device_interrupt, 418 419 .init_arch = lca_init_arch, 420 .init_irq = sio_init_irq, 421 .init_rtc = common_init_rtc, 422 .init_pci = noname_init_pci, 423 .kill_arch = sio_kill_arch, 424 .pci_map_irq = p2k_map_irq, 425 .pci_swizzle = common_swizzle, 426 427 .sys = { .sio = { 428 .route_tab = 0x0b0a090f, 429 }} 430}; 431ALIAS_MV(p2k) 432#endif 433 434#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL) 435struct alpha_machine_vector xl_mv __initmv = { 436 .vector_name = "XL", 437 DO_EV4_MMU, 438 DO_DEFAULT_RTC, 439 DO_APECS_IO, 440 .machine_check = apecs_machine_check, 441 .max_isa_dma_address = ALPHA_XL_MAX_ISA_DMA_ADDRESS, 442 .min_io_address = DEFAULT_IO_BASE, 443 .min_mem_address = XL_DEFAULT_MEM_BASE, 444 445 .nr_irqs = 16, 446 .device_interrupt = isa_device_interrupt, 447 448 .init_arch = apecs_init_arch, 449 .init_irq = sio_init_irq, 450 .init_rtc = common_init_rtc, 451 .init_pci = noname_init_pci, 452 .kill_arch = sio_kill_arch, 453 .pci_map_irq = noname_map_irq, 454 .pci_swizzle = common_swizzle, 455 456 .sys = { .sio = { 457 .route_tab = 0x0b0a090f, 458 }} 459}; 460ALIAS_MV(xl) 461#endif 462